Related
This is a starter thread for getting Nintendo's latest Android app (which has finally come from iOS over three months later), Super Mario Run, to work on Android devices that have been rooted and possibly have no Google Play Store installed. Developers, please contribute your findings!
It worked with root but I got an error when I finished the tutorial. Then I saved my game with a Nintendo account and I cleared game data. I've used magisk hide with this game and I can play again
apfo said:
It worked with root but I got an error when I finished the tutorial. Then I saved my game with a Nintendo account and I cleared game data. I've used magisk hide with this game and I can play again
Click to expand...
Click to collapse
I used magisk too but I can't find where I can hide.. can you help me? Do I need to install a module?
n0m1s said:
I used magisk too but I can't find where I can hide.. can you help me? Do I need to install a module?
Click to expand...
Click to collapse
After you've installed Magisk you just need to go to the Settings in the Magisk Manager APP and enable Magiskhide and then you should See a new tab for Magisk hide in the Manager APP and just select the Apps you want to hide root.
(Sorry for my Bad English)
ApollosRage said:
After you've installed Magisk you just need to go to the Settings in the Magisk Manager APP and enable Magiskhide and then you should See a new tab for Magisk hide in the Manager APP and just select the Apps you want to hide root.
(Sorry for my Bad English)
Click to expand...
Click to collapse
Thanks for that, but it's not working too
ApollosRage said:
After you've installed Magisk you just need to go to the Settings in the Magisk Manager APP and enable Magiskhide and then you should See a new tab for Magisk hide in the Manager APP and just select the Apps you want to hide root.
(Sorry for my Bad English)
Click to expand...
Click to collapse
I did exactly what you did and it worked fine for me.
So do I flash via twrp the zip in the magisk post?
I use magisk to hide mario but when i pass the tutorial send error 804 5100 and have to delete the Account:.xml located in /data/data/com.nintendo.zara/sharedfolder and then log in with my account so brings my save but i complete 1 course and the same error again and have to do it all over again, does anybody find a solution for this?
Is magisk a supersu replacement or can I just install alongside? It also says it requires 5.x so no 4.4?
Magisk work great for me
simbin said:
Is magisk a supersu replacement or can I just install alongside? It also says it requires 5.x so no 4.4?
Click to expand...
Click to collapse
it is a supersu replacement but the magisk is great and has better functions and the moduls are great, forget the turning off part and the the recovery and flash the zip, the magisk do it all for you!
Mago6246 said:
it is a supersu replacement but the magisk is great and has better functions and the moduls are great, forget the turning off part and the the recovery and flash the zip, the magisk do it all for you!
Click to expand...
Click to collapse
Don't think magisk works with cm12 on Amzn Fire Phone bc bootloader isn't actually unlocked. They should limit SafetyNet to Leaderboards - pretty sure that's what all the fuss is about. Fine, Nintendont take my money!
Magisk Manager won't install Magisk on my rooted S7 Edge. I've read that it's not compatible with Samsung devices right now, don't know if that's true. How else can I make Super Mario Run work?
suhide give me bootloop with lineos so I will try magisk
simbin said:
Is magisk a supersu replacement or can I just install alongside? It also says it requires 5.x so no 4.4?
Click to expand...
Click to collapse
Yes, You can use it alongside with SuperSU.
Hi !
Same error for me... I installed Magisk, uninstalled SuperSU, set the Super Mario App to hide but i still get the error...
Did I miss something ?
Thanks
Rooted Nexus 5 running Cataclysm 6.0.1
Miitomo was patched using a special security bypasser made for it, and also with XPosed and RootCloak. Is there a similar method for those who seem to have issues using Magisk?
I myself haven't tried Magisk. I'll see how it works on my Galaxy S7. :fingers-crossed:
Xda, please merge this thread with the other thread that I made. I accidentally made a duplicate.
I do not have Google Play services installed, and it seems to need it.
I'm currently running Magisk with Magisk Hide on and RootCloak as well and it keeps erroring out. Currently the only workaround I've found is deleting the deviceAccount xml file in the app prefs folder. I have a feeling it has something to do with xposed or safetynet that's causing it to fail. I enjoy the game enough that I wouldn't mind buying it, but not if Nintendo is going to lock users out like this.
Hey guys,
since i got my Oneplus 6, i couldnt get viper to work quite right. Most of the time its just shows "Processing: No" till i restart it and after like a hour or device switch it turns off.
I tried:
Copying the Audioeffects.conf from system/etc to vendor/etc
Using Magisk Audio Compability Module
Using Alternate Magisk V4A Module
Using a Magisk Rom with Build-In V4a (currently xXx 2.8)
Disabling Dirac and Services
but nothing worked
thanks for your help
i had the same but then i tried to use the other viper release from magisk and it worked. there is this one called hifi and fx
Try exiting the viper app with the 3 dots top right hand corner. That is what worked for me
dgunn said:
Try exiting the viper app with the 3 dots top right hand corner. That is what worked for me
Click to expand...
Click to collapse
that works for like 10 mins and then it gets killed
byReqz said:
that works for like 10 mins and then it gets killed
Click to expand...
Click to collapse
Sounds to me like you need to disable the battery optimizations for Viper. It's almost as if your phone is detecting High battery drain and shuts down the app
dgunn said:
Sounds to me like you need to disable the battery optimizations for Viper. It's almost as if your phone is detecting High battery drain and shuts down the app
Click to expand...
Click to collapse
yeah thats what i thought too, i zried whitelisting it and installing it as system app (+ magisk module) but it didnt seem to work.
I removed the one from my rom and tried the magisk repo version again and somehow its working till now
byReqz said:
yeah thats what i thought too, i zried whitelisting it and installing it as system app (+ magisk module) but it didnt seem to work.
I removed the one from my rom and tried the magisk repo version again and somehow its working till now
Click to expand...
Click to collapse
I was unaware that you were using the magisk module. I could not get that one to work either
dgunn said:
I was unaware that you were using the magisk module. I could not get that one to work either
Click to expand...
Click to collapse
the normal one doesnt work with viper doewsnt it?
Try just exiting the viper app then reopening it. I had this problem before and it just randomly went away.
TheNetwork said:
Try just exiting the viper app then reopening it. I had this problem before and it just randomly went away.
Click to expand...
Click to collapse
it only works for a few mins that way
I'm using the Android p beta and i don't have the problems with viper as i did with oxygen os 5. it's always processing for my headphones, either plugged in or Bluetooth. the only exception is sometimes after receiving a call while listening to music, after the call is over and my music resumes, viper is no longer processing. not every time though. i used the latest magisk and the viper module in the screenshot.
i also didn't make any changes to conf files, just installed through magisk download. rebooted, opened viper fx, gave it storage permissions and turned it on.
Had the same problem, but was able to resolve it by choosing the legacy (non-material) interface when installing the Magisk module. I still flashed the full module and selected the latest version, just not the material interface. It may have been something else, but I've updated my ROM (HavocOS) several times and even done a couple full fastboot stock resets and the issue is yet to resurface.
TuxRuffian said:
Had the same problem, but was able to resolve it by choosing the legacy (non-material) interface when installing the Magisk module. I still flashed the full module and selected the latest version, just not the material interface. It may have been something else, but I've updated my ROM (HavocOS) several times and even done a couple full fastboot stock resets and the issue is yet to resurface.
Click to expand...
Click to collapse
as i said, idk why but its working now.and im on material now
byReqz said:
Hey guys,
since i got my Oneplus 6, i couldnt get viper to work quite right. Most of the time its just shows "Processing: No" till i restart it and after like a hour or device switch it turns off.
I tried:
Copying the Audioeffects.conf from system/etc to vendor/etc
Using Magisk Audio Compability Module
Using Alternate Magisk V4A Module
Using a Magisk Rom with Build-In V4a (currently xXx 2.8)
Disabling Dirac and Services
but nothing worked
thanks for your help
Click to expand...
Click to collapse
I've had this problem on an Samsung S7 Edge, S8 Plus, and now, a Oneplus 6.
Everything appears to look good on Driver Status, except "Processing:No" and it's audibly not on.
What's worked for me in this specific situation is replacing the configuration file "audio_effects.conf" in /system/vendor/etc with another configuration file that I found in another XDA thread. So here's the concrete steps:
1. Install the viper4android FX module from Magisk manager that has four devs (v1.7 as i write this) and reboot. I don't know if this method will work with other v4a modules. Note that Processing will work temporarily, but likely won't survive a reboot.
2. Download this file (files_for_v4a.zip) from here:
https://forum.xda-developers.com/ga...laxy-s8-s8-t3596933/post72049061#post72049061
3. Unzip files_for_v4a.zip and make note where it extracted. (You'll need one of its contents, audio_effects.conf, later)
4. Using a file explorer with root capability, go to the following directory:
/system/vendor/etc
5. Copy the existing "audio_effects.conf" to another directory, for example /download, to use as a backup in case this goes badly
6. Copy the file "audio_effects.conf" that you unzipped earlier to /system/vendor/etc, overwriting the existing file.
7. Reboot and test v4a.
Good luck!
Note: The Pulse feature of a custom NavBar in custom ROMS based on LOS 15.1 will not work if you do the above.
Although I'm just a hack, I modded an "audio_effects.conf" file using commits from the above to work with Pulse. I've tested it on my device (despite my lack of know-how, it seems to work for me and others!), so be aware of this if you download the following file and use it (by renaming it audio_effects.conf and placing it in /system/vendor/etc):
reaper000 said:
I've had this problem on an Samsung S7 Edge, S8 Plus, and now, a Oneplus 6.
Everything appears to look good on Driver Status, except "Processing:No" and it's audibly not on.
What's worked for me in this specific situation is replacing the configuration file "audio_effects.conf" in /system/vendor/etc with another configuration file that I found in another XDA thread. So here's the concrete steps:
1. Install the viper4android FX module from Magisk manager that has four devs (v1.7 as i write this) and reboot. I don't know if this method will work with other v4a modules. Note that Processing will work temporarily, but likely won't survive a reboot.
2. Download this file (files_for_v4a.zip) from here:
https://forum.xda-developers.com/ga...laxy-s8-s8-t3596933/post72049061#post72049061
3. Unzip files_for_v4a.zip and make note where it extracted. (You'll need one of its contents, audio_effects.conf, later)
4. Using a file explorer with root capability, go to the following directory:
/system/vendor/etc
5. Copy the existing "audio_effects.conf" to another directory, for example /download, to use as a backup in case this goes badly
6. Copy the file "audio_effects.conf" that you unzipped earlier to /system/vendor/etc, overwriting the existing file.
7. Reboot and test v4a.
Good luck!
Note: The Pulse feature of a custom NavBar in custom ROMS based on LOS 15.1 will not work if you do the above.
Although I'm just a hack, I modded an "audio_effects.conf" file using commits from the above to work with Pulse. I've tested it on my device (despite my lack of know-how, it seems to work for me and others!), so be aware of this if you download the following file and use it (by renaming it audio_effects.conf and placing it in /system/vendor/etc):
Click to expand...
Click to collapse
Thanks for your long answer, will be trying the files if this module fails again.
Also im not on a LOS Based Rom, im on OOS and GravityBox
byReqz said:
Thanks for your long answer, will be trying the files if this module fails again.
Also im not on a LOS Based Rom, im on OOS and GravityBox
Click to expand...
Click to collapse
Just seeing if I can help! And I did the same sequence of steps on OOS as well ... But I haven't run gravity box in awhile. Hope it works out for you.
reaper000 said:
Just seeing if I can help! And I did the same sequence of steps on OOS as well ... But I haven't run gravity box in awhile. Hope it works out for you.
Click to expand...
Click to collapse
I tried everything but it still needs a restart to be working sometimes, do you know if i have to disable dirac or something?
byReqz said:
I tried everything but it still needs a restart to be working sometimes, do you know if i have to disable dirac or something?
Click to expand...
Click to collapse
I haven't messed with dirac at all, and v4a still works for me.
Some clarification, please:
Did you uninstall the v4a magisk module that came with xXx and reboot?
Then go to magisk manager and install v4a fx materialized1.7 and follow the rest of the steps outlined in my post?
reaper000 said:
I haven't messed with dirac at all, and v4a still works for me.
Some clarification, please:
Did you uninstall the v4a magisk module that came with xXx and reboot?
Then go to magisk manager and install v4a fx materialized1.7 and follow the rest of the steps outlined in my post?
Click to expand...
Click to collapse
yeah, its 1.7 from magisk repo, disabling dirac seems to help a bit but not everytime
byReqz said:
yeah, its 1.7 from magisk repo, disabling dirac seems to help a bit but not everytime
Click to expand...
Click to collapse
And you replaced the audio_effects.conf file in /system/vendor/etc with the one from the downloaded zip?
(Sorry to belabor the point, but it's not clear to me you tried all that)
Hi All,
Having a strange issue with Magisk.
I performed the upgrade today coming from renovate ice (Magisk module).
I followed the instructions of flashing the full OTA of the pie update. And then the blusparks TWRP. I rebooted into recovery and then flashed Magisk 17.1 as per the guide.
Booting back into the OS I can see that Magisk Manager is missing and my rooted apps are unable to get root either. Also when I try to goto the themes section inside settings the settings app crashes on me.
I attempted to reinstall Magisk but this did not work. I only noticed that when I was running the uninstaller for Magisk it did detect my boot image is Magisk rooted despite the OS not reflecting this.
Any ideas? My next step is 17.2 but I have my doubts on it.
EDIT: I tried 17.2 beta release and it made no difference. Exact same symptoms
spartan268 said:
Hi All,
Having a strange issue with Magisk.
I performed the upgrade today coming from renovate ice (Magisk module).
I followed the instructions of flashing the full OTA of the pie update. And then the blusparks TWRP. I rebooted into recovery and then flashed Magisk 17.1 as per the guide.
Booting back into the OS I can see that Magisk Manager is missing and my rooted apps are unable to get root either. Also when I try to goto the themes section inside settings the settings app crashes on me.
I attempted to reinstall Magisk but this did not work. I only noticed that when I was running the uninstaller for Magisk it did detect my boot image is Magisk rooted despite the OS not reflecting this.
Any ideas? My next step is 17.2 but I have my doubts on it.
Click to expand...
Click to collapse
Manually download and install magisk manager app then try to open root apps.
Then give root permission that works
pankspoo said:
Manually download and install magisk manager app then try to open root apps.
Then give root permission that works
Click to expand...
Click to collapse
It errors out saying "App not installed" when I try the manager APK.
spartan268 said:
It errors out saying "App not installed" when I try the manager APK.
Click to expand...
Click to collapse
Are u able to see magisk manager app in apps under sysytem apps?
If yes then remove or disable that
pankspoo said:
Are u able to see magisk manager app in apps under sysytem apps?
If yes then remove or disable that
Click to expand...
Click to collapse
Nothing there either...
pankspoo said:
Are u able to see magisk manager app in apps under sysytem apps?
If yes then remove or disable that
Click to expand...
Click to collapse
I was able to resolve the issue by performing a factory reset without having to wipe data. I'm guessing something old must have been left behind. Thanks for the help you provided, I appreciate it
I got my phone (SM-G950F a.k.a Samsung Galaxy S8) rooted about a year ago or so...and since, i update MM whenever needed but this time when i tried to update it, it says this:
Unsupported Magisk Version
This versio of Magisk Manager does not support Magisk version lower than v18.0
You can either manually upgrade Magisk, or downgrade the app to an older version.
I cannot go into the app cause that message will pop up and after i press ok it closes by itself!
Any ideea on how to fix this? If i have to re-root the phone please do explain..even then i didn't knew for sure how i did it, but i did it..
Thanks in advance!
Ahh... Me too. I'm sure this somewhere in the extensive Magisk coverage here. Is it too lazy to ask for a pointer to how to
--- downgrade the manager? That's probably easy if I know where to get the apk. Which version should I go for?
--- install the new magisk over the existing version, preferably without wiping the phone?
Sure, I'll search. But it is quite a while since I did anything with magisk, or anything that involved flashing, and I feel a bit lost.
Thad E Ginathom said:
Sure, I'll search. ... ... ...
Click to expand...
Click to collapse
OK, so there's a wiki and stuff. Whilst being babied would be nice, people have better things to do, and I guess I'll just start in reading that wiki and... stuff.
SOLUTION
Deathnes said:
I got my phone (SM-G950F a.k.a Samsung Galaxy S8) rooted about a year ago or so...and since, i update MM whenever needed but this time when i tried to update it, it says this:
Unsupported Magisk Version
This versio of Magisk Manager does not support Magisk version lower than v18.0
You can either manually upgrade Magisk, or downgrade the app to an older version.
I cannot go into the app cause that message will pop up and after i press ok it closes by itself!
Any ideea on how to fix this? If i have to re-root the phone please do explain..even then i didn't knew for sure how i did it, but i did it..
Thanks in advance!
Click to expand...
Click to collapse
Delete the Magisk Manager app as you would do with any other, download the proper version in .apk (check the official thread) and install it.
In the thread, under Sources, you have the link to the GitHub repo. Scrolling down you will find the README.MD file and the link to the Downloads page where all past releases are available.
From https://www.xda-developers.com/how-to-install-magisk/ you can read:
The Magisk framework is now installed on your device. To manage it, you’ll need the aptly named Magisk Manager. This is what will allow you to install modules. Download the latest Magisk Manager APK here and make sure you have “Unknown sources” enabled in the Settings. Install the app and open it up.
The Manager app allows you to adjust root settings and also install modules, which are installable mods. The app doubles as a repository for a bunch of great modules that can easily extend the functionality of your device. Using the Manager app is an important part of getting the most out of this root method.
Click to expand...
Click to collapse
That is, the app Magisk Manager is independent from the Magisk framework you have installed. Deleting the app does not affect Magisk.
vomae said:
... ... ... the Downloads page where all past releases are available.
Click to expand...
Click to collapse
I'd reached there, although not done it yet. As you say, my phone is still working, Magisk is still working, it is just the manager app that needs dealing with. None the less, I appreciate your time and effort. You paint a clear picture for others who come this way.
Thanks.
Open the updated app & ignore the error, then checkout the option showing update magisk(not manager), go for it, dont select any preservations & click on direct install(which is recommended by app itself).
Flashing of the update will begin, then after reboot your problem is solved.
Magisk Manager has many improvements and features over the last year...
My phone is rooted with Magisk after installing TWRP recovery and it's working fine except banking apps which do not run due to rooted phone
I don't use functions of rooted phone so much, only in extracting whatsapp keys to backup my whatsapp chats etc
1) Can I uninstall/unroot Magisk anytime and reinstall/root again smoothly whenever the need arises?
2) Does installing/uninstalling root wipe data?
3) I saw following para in https://magiskmanager.com/uninstall-magisk
Your phone will be rebooted automatically. Don’t worry it is normal
That’s it! You have successfully uninstalled Magisk from your phone.
This process will completely delete all the files from your phone, and you don’t need to worry about anything.
Click to expand...
Click to collapse
What's meaning of "This process will completely delete all the files from your phone" here?
Thanks & regards,
Maria.
AFAIK any tampering of a phone's Stock ROM can get detectected by banking / payment apps - if they want to. IMO the very only method to remove all traces of modifcations applied to phone's Stock ROM is to re-flash phone's Stock what in turn causes the loss of all user data stored on phone.
1) Can I uninstall/unroot Magisk anytime and reinstall/root again smoothly whenever the need arises?
Yes.
2) Does installing/uninstalling root wipe data?
No. As long as you're not locking/unlocking your bootloader, you should be fine. Always a good idea to back up your data and system bacakup since you have TWRP anyway.
3) I saw following para in https://magiskmanager.com/uninstall-magisk
I believe this is reffering to all the MAgisk data only.
Andrologic said:
1) Can I uninstall/unroot Magisk anytime and reinstall/root again smoothly whenever the need arises?
Yes.
2) Does installing/uninstalling root wipe data?
No. As long as you're not locking/unlocking your bootloader, you should be fine. Always a good idea to back up your data and system bacakup since you have TWRP anyway.
3) I saw following para in https://magiskmanager.com/uninstall-magisk
I believe this is reffering to all the MAgisk data only.
Click to expand...
Click to collapse
Thank you very much for your reply
Maria2014 said:
I am having the same problem. I want to ask if you tried uninstall magisk ? What happened ?
Click to expand...
Click to collapse
My dear, I install and uninstall Magisk all the time. Legitimately speaking, never once did it wipe my data ever. Unless you unlock or relock your bootloader, you will be completely fine.
Shabeeh Manappurath said:
My dear, I install and uninstall Magisk all the time. Legitimately speaking, never once did it wipe my data ever. Unless you unlock or relock your bootloader, you will be completely fine.
Click to expand...
Click to collapse
Hi,
Could you advice pls.
After updating magisk it stopped working..
Shuld I uninstall it and then reinstall?
Will my modouls be earased? I am very worried taking this step..
Thanks in advance
tuvia_g123 said:
Hi,
Could you advice pls.
After updating magisk it stopped working..
Shuld I uninstall it and then reinstall?
Will my modouls be earased? I am very worried taking this step..
Thanks in advance
Click to expand...
Click to collapse
My advise is, Incase you feel your modules will be erased, just take a screenshot of ur magisk Modules. Screenshot which you can use to later download the exact same modules. Or u can keep magisk module downloaded before hand. Now if magisk is not working, magisk Modules will not show for you.
If magisk is not working, you don't need to uninstall it. Just go to recovery and reflash the magisk.zip or magisk.apk. both will work, bcos that is how it is. Magisk.apk can be directly flashed from recovery menu. Once you reinstall magisk from recovery and it should start working. If after reboot, it is still not working, then just install magisk.apk while you are in android. (Not in recovery, but normal mode) and then open it and see what it says.
If I can help, I will surely. Let me know how it goes. Usually no data is erased. Don't worry. Magisk Modules or magisk, don't effect the system. U can also download magisk uninstaller.zip if you want to completely uninstall magisk.
Shabeeh Manappurath said:
My advise is, Incase you feel your modules will be erased, just take a screenshot of ur magisk Modules. Screenshot which you can use to later download the exact same modules. Or u can keep magisk module downloaded before hand. Now if magisk is not working, magisk Modules will not show for you.
If magisk is not working, you don't need to uninstall it. Just go to recovery and reflash the magisk.zip or magisk.apk. both will work, bcos that is how it is. Magisk.apk can be directly flashed from recovery menu. Once you reinstall magisk from recovery and it should start working. If after reboot, it is still not working, then just install magisk.apk while you are in android. (Not in recovery, but normal mode) and then open it and see what it says.
If I can help, I will surely. Let me know how it goes. Usually no data is erased. Don't worry. Magisk Modules or magisk, don't effect the system. U can also download magisk uninstaller.zip if you want to completely uninstall magisk.
Click to expand...
Click to collapse
Thank you very much for your detailed and clear answer.
In the next few days I will find time and try.
Of course I will update you.
tuvia_g123 said:
Thank you very much for your detailed and clear answer.
In the next few days I will find time and try.
Of course I will update you.
Click to expand...
Click to collapse
Alright Dear, take your time, and let me know, I hope everything works out for you. And Your Welcome
Shabeeh Manappurath said:
Alright Dear, take your time, and let me know, I hope everything works out for you. And Your Welcome
Click to expand...
Click to collapse
Hello dear friend,
Looks like I deleted the original zip file.
Can you pls. attach a link that wont be malware of a magisk zip?
Thanks a lot
tuvia_g123 said:
Hello dear friend,
Looks like I deleted the original zip file.
Can you pls. attach a link that wont be malware of a magisk zip?
Thanks a lot
Click to expand...
Click to collapse
The best, and only official place to download magisk from is GitHub. At least I think. And well there is one another website I download it from, it's not malware, but I will provide you with the GitHub link itself.
For Magisk v23.0 (One with MagiskHide)(This release also has online module repo, where you can download extra supported modules for your device from online repo of magisk)
https://github.com/topjohnwu/Magisk/releases/download/v23.0/Magisk-v23.0.apk
For Magisk v25.2 (It does not have MagiskHide, but this is much more better, and there are more effective ways to hide root using Zygisk (new feature in Magisk v24 onwards I believe) (This one does not have Online Repo for Magisk modules, it was also removed in a previous version of Magisk, and you can use Fox's Magisk Modules manager if you want to access and download magisk Modules for any of the future releases for Magisk) If you want the link for Magisk v25.2 then here it is:
https://github.com/topjohnwu/Magisk/releases/download/v25.2/Magisk-v25.2.apk
Just if u face any difficulty in flashing the apk file in recovery, just rename it to magisk v23/v25.2 (whichever u choose, I kinda recommend using the latest version) and rename it into . Zip. And if u plan on going with v25.2 and want to access the latest online repo and some of their own Magisk modules, then here is the link for the latest version of Fox's Magisk Modules manager:
Release 0.6.1 - Maintenance Update · Fox2Code/FoxMagiskModuleManager
Add Androidacy test-mode fix to non test-mode Update Brazilian translations by @DanGLES3
github.com
I am currently using the latest Magisk v25.2 on my phone, and currently running on the latest version of Fox's Magisk Modules manager as well. And also, using the method for hiding root that I mentioned before, I am completely successful in covering my root, and my safety net is passed. Completely Passed. Play store or any other app I don't want it detecting root, does not detect root. So we all good if you want to flash the latest update of Magisk.
Shabeeh Manappurath said:
The best, and only official place to download magisk from is GitHub. At least I think. And well there is one another website I download it from, it's not malware, but I will provide you with the GitHub link itself.
For Magisk v23.0 (One with MagiskHide)(This release also has online module repo, where you can download extra supported modules for your device from online repo of magisk)
https://github.com/topjohnwu/Magisk/releases/download/v23.0/Magisk-v23.0.apk
For Magisk v25.2 (It does not have MagiskHide, but this is much more better, and there are more effective ways to hide root using Zygisk (new feature in Magisk v24 onwards I believe) (This one does not have Online Repo for Magisk modules, it was also removed in a previous version of Magisk, and you can use Fox's Magisk Modules manager if you want to access and download magisk Modules for any of the future releases for Magisk) If you want the link for Magisk v25.2 then here it is:
https://github.com/topjohnwu/Magisk/releases/download/v25.2/Magisk-v25.2.apk
Just if u face any difficulty in flashing the apk file in recovery, just rename it to magisk v23/v25.2 (whichever u choose, I kinda recommend using the latest version) and rename it into . Zip. And if u plan on going with v25.2 and want to access the latest online repo and some of their own Magisk modules, then here is the link for the latest version of Fox's Magisk Modules manager:
Release 0.6.1 - Maintenance Update · Fox2Code/FoxMagiskModuleManager
Add Androidacy test-mode fix to non test-mode Update Brazilian translations by @DanGLES3
github.com
I am currently using the latest Magisk v25.2 on my phone, and currently running on the latest version of Fox's Magisk Modules manager as well. And also, using the method for hiding root that I mentioned before, I am completely successful in covering my root, and my safety net is passed. Completely Passed. Play store or any other app I don't want it detecting root, does not detect root. So we all good if you want to flash the latest update of Magisk.
Click to expand...
Click to collapse
Hi,
I prefer v 23 because it has the hide option builtin.
However after flashing it(i think succesfuli) i do not find any new app in my fhone..
tuvia_g123 said:
Hi,
I prefer v 23 because it has the hide option builtin.
However after flashing it(i think succesfuli) i do not find any new app in my fhone..
Click to expand...
Click to collapse
Alright your preference is your own, but maybe hear me out, v23 will soon become outdated, as in some magisk Modules will stop working for it. And the magisk hide, according to the founder of Magisk @topjohnwu, he said that magisk hide is become really ineffective in blocking root, or stopping apps from detecting root. If you want a more powerful version of Magisk hide, update to v25.2 and I will show you how to activate it step by step. It's not built-in, rather it is a new module. So yeah.
Alright and about your question; if you don't find the app in your phone, in your apps drawer, just open file explorer, go to the location where u have kept the magisk.zip file or magisk.apk file. If u have the apk file then just install it once more, from android while in normal mode. If you have the zip file, then just rename to .APK and install it same like above. Then open magisk to continue (mostly after proper install, magisk will reboot your phone once more). Any steps you are stuck in, pls sent me a screenshot, so that I can help.
Shabeeh Manappurath said:
Alright your preference is your own, but maybe hear me out, v23 will soon become outdated, as in some magisk Modules will stop working for it. And the magisk hide, according to the founder of Magisk @topjohnwu, he said that magisk hide is become really ineffective in blocking root, or stopping apps from detecting root. If you want a more powerful version of Magisk hide, update to v25.2 and I will show you how to activate it step by step. It's not built-in, rather it is a new module. So yeah.
Alright and about your question; if you don't find the app in your phone, in your apps drawer, just open file explorer, go to the location where u have kept the magisk.zip file or magisk.apk file. If u have the apk file then just install it once more, from android while in normal mode. If you have the zip file, then just rename to .APK and install it same like above. Then open magisk to continue (mostly after proper install, magisk will reboot your phone once more). Any steps you are stuck in, pls sent me a screenshot, so that I can help.
Click to expand...
Click to collapse
Hi,i took your advice and flashed v. 25.2, however i think that the installation failed..
tuvia_g123 said:
Hi,i took your advice and flashed v. 25.2, however i think that the installation failed..
Click to expand...
Click to collapse
Hey, I see, okay use magisk uninstaller to completely remove v23 first, and then flash v25.2 afterwards.
From what I researched, it seems u can easily uninstall magisk by renaming magisk v25.2.apk (the file we downloaded) rename it into uninstall.zip
And then reboot to recovery, flash it from recovery to completely uninstall magisk v23. (Make a copy of the file before renaming into uninstall.zip.) that way we can flash v25.2.apk /v25.2.zip directly.
Hope everything works for you.
Shabeeh Manappurath said:
Hey, I see, okay use magisk uninstaller to completely remove v23 first, and then flash v25.2 afterwards.
Just to be sure,v. 23 that I want to uninstall not to rename?
From what I researched, it seems u can easily uninstall magisk by renaming magisk v25.2.apk (the file we downloaded) rename it into uninstall.zip
And then reboot to recovery, flash it from recovery to completely uninstall magisk v23. (Make a copy of the file before renaming into Uninstall.zip.) that waysure that I understood.. we can flash v25.2.apk /v25.2.zip directly.
not sure that i understands.
Click to expand...
Click to collapse
Shabeeh Manappurath said:
Not
Hope everything workNs for you.
Hey, I see, okay use magisk uninstaller to completely remove v23 first, and then flash v25.2 afterwards.
N
From what I researched, it seems u can easily uninstall magisk by renaming magisk v25.2.apk (the file we downloaded) rename it into uninstall.zip
And then reboot to recovery, flash it from recovery to completely uninstall magisk v23. (Make a copy of the file before renaming into uninstall.zip.) that way we can flash v25.2.apk /v25.2.zip directly.
Hope everything works for you.
Click to expand...
Click to collapse
Not sure that I understood.
Not to rename Version 23 that I want to uninstall?
Rename v25 that we want to keep?
https://drive.google.com/uc?export=download&id=1XvA2wCzCfSgQGJRgzJ-yklOYn99DDjBQ
Just Flash that, in order to uninstall Magisk from your device. And then, install the latest Magisk v25.2
Shabeeh Manappurath said:
https://drive.google.com/uc?export=download&id=1XvA2wCzCfSgQGJRgzJ-yklOYn99DDjBQ
Just Flash that, in order to uninstall Magisk from your device. And then, install the latest Magisk v25.2
Click to expand...
Click to collapse
Hi dear,
First of all thank you again.
After flashing this when i am entering again to recovery I don't get the screen of twarp as before.
However installation of v. 25.2 (in recovery)failed again..
Atached screen shots.