Related
I dropped it a few weeks ago and the screen is toast along with the lcd and digitizer. I have it taken apart and I was wondering - what are the chances it will work again? I have debugging enabled and ended up trying to use androidscreencast java program. It will read the internal memory but won't display a screen. Also, the HDMI out occasionally works but it's a little rocky.
My question is this: Is it possible it's fried, or is there a possibility that maybe it is malfunctioning because the digitizer is completely ruined along with the LCD? I have everything still attached including the camera(s).
Right now the screen lights up (though you can't see anything) but my computer won't detect it when plugged in nor will it output HDMI to my TV =(.
Should I spend the money to get a new lcd/digitizer/screen, or should I just give up? I JUST got this phone (no insurance)
How would it be fried if you only dropped it?
As for anything else, for HDMI I have to enable by using the SCREEN, so that might be why you can't use it when connected to your TV.
And for the connection to your computer, mine detects that I have it plugged it, but it doesn't let me transfer files to or from without enabling mass storage, which is again done by touching the SCREEN.
On a side note, I broke the LCD on my Vibrant twice, everything worked fine, just had to replace the screen. Don't know about this phone, but if the phone turns on, then chances are everything is fine. Unless its a software related, such as being bricked.
Sent from my LG-P999 using XDA
Has anyone encountered the following issues with their SHIELD?
Mine was working just fine after updating to 4.3 and rooting with CWM. I performed multiple reboots in this configuration, played games, etc. - everything was fine.
I had a pretty busy weekend so didn't touch the SHIELD at all for a few days. When I got back:
When I opened it up, I saw the screen backlight turn on but nothing displayed on the screen. The SHIELD button was glowing green.
I long-pressed the SHIELD button to turn off the device. When I turn it back on, I get a white screen that is dark around the edges (mostly vignetting around the corners). The brightness of the screen here and degree of vignetting seem to change every time I try and turn on the device.
If I enter fastboot mode via the key combo, the same thing happens - white vignetted screen. The device DOES appear to enumerate as a fastboot device on my PC in this configuration.
At one point I figured it might be due to a low battery, so plugged it into the charger. 30 minutes later, when I opened the lid, I actually came up to a launcher screen with 65% battery.
However, after closing the lid and reopening it again - black screen again, with the "white vignette of death" coming back if I reboot.
Has anyone else seen similar behavior? Searching results in no one complaining about a white screen like this, at least not on this device.
Screen of Death
This just happened to me today. Did you find a fix for this problem?
Entropy512 said:
Has anyone encountered the following issues with their SHIELD?
Mine was working just fine after updating to 4.3 and rooting with CWM. I performed multiple reboots in this configuration, played games, etc. - everything was fine.
I had a pretty busy weekend so didn't touch the SHIELD at all for a few days. When I got back:
When I opened it up, I saw the screen backlight turn on but nothing displayed on the screen. The SHIELD button was glowing green.
I long-pressed the SHIELD button to turn off the device. When I turn it back on, I get a white screen that is dark around the edges (mostly vignetting around the corners). The brightness of the screen here and degree of vignetting seem to change every time I try and turn on the device.
If I enter fastboot mode via the key combo, the same thing happens - white vignetted screen. The device DOES appear to enumerate as a fastboot device on my PC in this configuration.
At one point I figured it might be due to a low battery, so plugged it into the charger. 30 minutes later, when I opened the lid, I actually came up to a launcher screen with 65% battery.
However, after closing the lid and reopening it again - black screen again, with the "white vignette of death" coming back if I reboot.
Has anyone else seen similar behavior? Searching results in no one complaining about a white screen like this, at least not on this device.
Click to expand...
Click to collapse
Might be just bad luck for me.....
nmerc001 said:
This just happened to me today. Did you find a fix for this problem?
Click to expand...
Click to collapse
So ive already gotten two shields and they both got the same effect. my guess is the ribbon cable when you open and close the screen, is wearing off? because when i open my shield in a certain way, it works... when i open it at around 100 degrees or open correctly then tilt it forward, the screen tears and slowly shows the white screen. I do admit that i open and close the screen more than i should, but i do it carefully. Ill look over at the ifixit site to see how the cable is connected to the board.
This is what has me worried about buying a shield, the ribbon cable, did you confirmed this was the problem?
DJNinja1625 said:
So ive already gotten two shields and they both got the same effect. my guess is the ribbon cable when you open and close the screen, is wearing off? because when i open my shield in a certain way, it works... when i open it at around 100 degrees or open correctly then tilt it forward, the screen tears and slowly shows the white screen. I do admit that i open and close the screen more than i should, but i do it carefully. Ill look over at the ifixit site to see how the cable is connected to the board.
Click to expand...
Click to collapse
I am a tech by trade and bought one of ebay for 40 bucks cuz it would not power up so the guy claimed. After getting it I found the issue was actually the display was not coming on and once it did. Then went out in a few moments. Connect it to HDMI and the unit runs all day of you want to be cabled. ]
So I tore it down and found that the issue is the flex cable. The problem is that the flex cable is part of the LCD and you cannot just replace the cable. Also since the unit is so new there are no sources as of yet to by the LCD from.
So if you have this issue I suggest just holding out till a source of LCD's at hopefully a reasonable price become available.
So it's soldered to the screen and not replacable right?
nex86 said:
So it's soldered to the screen and not replacable right?
Click to expand...
Click to collapse
That is correct.. The flex cable is actually an integral part of the display and even has much of the driver circuitry placed right on it at the LCD. In the business we call it a flex circuit since it is a flexible circuit board and not just a cable.
I pretty much know what you mean.
On my old Archos Gamepad I ripped the flex that connected the left side of the controler to the logic board by accident.
It was a pain in the ass to fix it by soldering seperate wires, I guess it's impossible to do this with the display connection in the Shield.
nex86 said:
I pretty much know what you mean.
On my old Archos Gamepad I ripped the flex that connected the left side of the controler to the logic board by accident.
It was a pain in the ass to fix it by soldering seperate wires, I guess it's impossible to do this with the display connection in the Shield.
Click to expand...
Click to collapse
Might be possible if you used 32 gauge magnet wire. It is enamel coated so it won't short, but it to will break over time.
hi, flash factory image
Sent from my LT25i using XDA Free mobile app
dragxdk said:
hi, flash factory image
Sent from my LT25i using XDA Free mobile app
Click to expand...
Click to collapse
How are you supposed to flash a factory image when the screen won't let you see what you are doing? When you are in the bootloader screen the HDMI drivers are not loaded yet so not even hooking it to an external monitor will work. You might want to fully read and understand the problem next time before offering advice.:good:
fastboot tells you if you were sucessful or not.
just for relocking the bootloader you have to do some button combinations, you can look up some tutorial videos to see what you have to press.
nex86 said:
fastboot tells you if you were sucessful or not.
just for relocking the bootloader you have to do some button combinations, you can look up some tutorial videos to see what you have to press.
Click to expand...
Click to collapse
Even still, it is not a software problem that causes this. I know because if I move my display to a certain angle it will start to work sometimes. A software issue would not cause this. I also have taken my apart since I am a tech and can actually see the traces in the flex cable that have broken..
Any device with a folding display is a bad idea and a failure waiting to happen. Flex cables have a limited number of flex cycles that is even usually published. So the idea of using them in a device that may get heavy use is just dumb.
Solarenemy68 said:
Any device with a folding display is a bad idea and a failure waiting to happen. Flex cables have a limited number of flex cycles that is even usually published. So the idea of using them in a device that may get heavy use is just dumb.
Click to expand...
Click to collapse
I agree, they used flex in the Nintendo DS and 3Ds as well, but they don't break that fast.
I find it still better if they have used recular cables like what they use for Laptops.
Solarenemy68 said:
Even still, it is not a software problem that causes this. I know because if I move my display to a certain angle it will start to work sometimes. A software issue would not cause this. I also have taken my apart since I am a tech and can actually see the traces in the flex cable that have broken..
Any device with a folding display is a bad idea and a failure waiting to happen. Flex cables have a limited number of flex cycles that is even usually published. So the idea of using them in a device that may get heavy use is just dumb.
Click to expand...
Click to collapse
What you are saying is the EXACT same thing that happened to my SHIELD. I can tell its a hardware problem because when I tilted my screen it would work, and sometimes it wouldn't. Now my SHIELD's display does not even show any signs of picture. HDMI still works, however. Like one of the previous posts said, there is not a screen available for purchase, so my next step is NVIDIA customer support. Maybe if they would sell these screens, I wouldn't even have to have a warranty claim. sigh.
White screen of death?
yes mine too same as
i tried connecting my via HDMI from power cable to large HDMI to plug it works fine on my galaxy tab
thought id be clever try it on nvidia shield never worked sould of bought mini HDMI so now White screen of death
i cant get into recovery or anything i had this on charge for 12 hrs yesterday still no green button on charge only orange .. i too cant find anything on internet to help with this White screen of death situation
Solarenemy68 said:
How are you supposed to flash a factory image when the screen won't let you see what you are doing? When you are in the bootloader screen the HDMI drivers are not loaded yet so not even hooking it to an external monitor will work. You might want to fully read and understand the problem next time before offering advice.:good:
Click to expand...
Click to collapse
This. I'm having a similar issue. My wife's SHIELD has an unresponsive touch screen. So I tried to flash the factory image (It was never rooted to begin with) and I got the white screen issue when in the bootloader screen. I have to keep restarting it to get the screen to show up as normal when the device boots to the home screen. But the bootloader screen is still blank and white. I was able to watch a video and mimick the steps to flash the factory image but that did not fix the issue. It's definitely a hardware issue. I live in Cincinnati OH, anywhere I can go to have this fixed? I have a portable myself and i know this is going to happen to mine soon.
Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!
jono_nz said:
Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!
Click to expand...
Click to collapse
Only time I've seen something like this was when my integrated graphics card on my desktop overheated, everything still worked, but colorful static everywhere. I'd let it cool down for a while, chances are it was pretty hot when it did that, and see if high temps might make it happen again.
I just had the same thing happen. Phone had been in my pocket and I had just taken it out to check the time maybe 10 minutes before it happened. The only difference with mine was I bumped into a table and hit the phone in my pocket. It does have a case on it and there is no sign of damage at all such as a cracked screen or anything. The static only lasts for a few seconds and thats right after I force it to reboot. After that it just goes to an all black screen. My LED indicator light is still flashing at me telling me I have an email though so I'm not sure what the deal is.
Were you able to resolve this issue? I too just experienced this issue as well and my phone is currently unusable. Thanks!
Do a full wipe as in wiping the entire phone and making it as if you just got it out of the box. if it persist RMA
Sent from my Nexus 5
Hi, I broke my screen (really bad smash) and had have this static on my new screen. The new screen was apparently fully tested. When using the slim port i can display on my TV and the digitizer works fine, its just this same colour static on the handset. I am now waiting for a replacement USB flex (it was a bit bent in the break) and i expect the new USB flex will fix it. If not then its a bad screen.
Will post the results when i get the parts
Fixed!
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone
zeebo1111 said:
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone
Click to expand...
Click to collapse
Hi,
sorry for reopen the topic but I really need to know if change de USB flex solve this problem
thanks
Static screen and freezing
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.
Madzy said:
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.
Click to expand...
Click to collapse
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?
Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.
nexus565 said:
Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.
Click to expand...
Click to collapse
Most likely the flex cable
ふかつどう
Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.
bullorbear said:
Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.
Click to expand...
Click to collapse
Looks like the daydream function. You can turn it off in Settings>Display>Daydream
Sent from my Nexus 5 Unchained using XDA Free mobile app
Same thing, Screen now black. Won't turn on...
Hey everyone, I know that this is kind of late to the thread, but I have what I believe is the same problem as everybody else here. I had my Nexus 5 in my pocket for maybe five minutes, and in between the times that I put it in my pocket and took it out again to reply to a text, the screen went all colorful and static on me (Red tint, almost as if I had twilight on, but I didn't). I tapped the back, and the colors went back to normal, but the digitizer wasn't responding to touch. Then, It went black. No color, the speakers weren't working, neither was the backlight on the display. I took it apart, and figured its either the USB flex cable (which looked frayed), or the mainboard. If its the USB flex cable, then I know I can repair it. If it's the mainboard... well, as a sixteen year-old who has no current source of income, I'm out of a $400 phone.
Pictures attatched. Thanks!
rikudo said:
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?
Click to expand...
Click to collapse
I took the phone the LG service center and the technician seemed to know this issue and immediately said that the USB flex cable needs to be changed. The entire fix took about 5 mins and the phone is working fine since then.
Sorry for the delayed response.
I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.
pezkiln said:
I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.
Click to expand...
Click to collapse
Hey man, did you ever try this out and get it to work? I have the same problem and was thinking of trying this out but wanted confirmation first.
Thanks!
Just wanted to post here to say that this thread just saved me a lot of money!
Had the same issue (static showing on the screen). Local phone repair shop told me it needed a new screen, without even looking at it(!), and it would be £120 + labour. Told them I would think about it, and came home and did some more research, found this thread. Ordered a replacement USB flex cable from eBay, and fit it by following a YouTube tutorial, and now the phone is back working fine. brilliant!
Thanks xda!
I had a problem where my screen looked like an old CRT TV with particles flashing all over on anything with a static dark background. Any ideas
Hello guys, i need help to understand problem.
I bought new lcd..because my old one cracked. The process of change run smooth.. But when i turn on phone my capacitive buttons doesnt react. The lighs turn on when phone Boots and shutdown.
So my questions are:
-can be lcd defective?
-only thing that comunicate is lcd flat cable connect to mainboard?
-buttons zone are controlled by dígitizer right? Or are releatd with power board where buttons are?
Any opnion will be welcome.
Ps. Sorry my engish but is not my native language
I had kinda same problem with my S6. In my case it was a faulty USB Board(But it fixed itself..) I guess You could try discharging Your phone until it barely can boot. Leave it for a day, and then charge it from 0 to 100%. If that doesn't work, try flashing stock rom with ODIN, or blowing air into Your USB Port(This fixed my friends Xperia phone with fault USB port). And if none of those work.. Try getting a new USB Board and it should fix that. Or make sure that the cable that connects USB Board to motherboard is seated properly and optionally check if capacitive buttons are close enough to digitizer/display.
Anyone can explain how it works this 2 things toghther?
Is digitizer of LCD that control and two buttons only give light or all work is given by two buttons and lcd only have the draw to let show light?
Hello together,
I have a Z5 (6653) that didn't start anymore and got extremely hot while charging. To be more clear: after connecting the phone to the charger the red LED turned on, then after about 10 seconds later it turned off again. From this moment on the phone's back started to get extremely hot. The source of the heat is about 1cm right and 1 cm down to the back camera (so you can say 1cm diagonal from the camera to the phone middle). Because of this I doubt it has to do with the battery as it should heat the lower two-third and not the upper third of the phone. Maybe the processor is at this place?
I tried to connect the phone in flash mode with the PC and it connected, but disconnected after a few seconds, probably because battery was empty. I repeated this procedure (connecting to charger, disconnecting, reconnecting, connecting to PC) a few days and suddenly the red LED kept on and the phone didn't get hot anymore.
So I charged the phone fully and wanted to start it, but the screen won't turn on anymore. Connecting it to the PC and the Phone drive (MTP) is displayed but empty, because you need to unlock screen. Also I hear the connecting sound of the phone and touch feedback sounds.
I tried the following things:
Xperia Companion Repair
Flashtool flashing newest ROM
Flashtool downgrading to 32.0.A.6.152_R5B (LP ROM)
Nothing helped. Well, the idea it is an hardware issue might be at hand, but maybe there is something else I can try first?
And if it is an Hardware issue, what is the cause? The Display itself? Then why was a single point at the phone back the source of heat and not a large area on the phone front?
A short summary:
Phone gets hot while connected to charger
Battery won't charge (LED indicator turns off after few seconds)
Source of heat is 1cm to the right and down to the back camera; after 2 minutes whole phone is hot and you can't recognize the source
After days of repeating the action (connect to charger, disconnect, connect to PC, connect to charger) it suddenly charged the battery and didn't get hot anymore
Display won't start anymore; still responsive
Tried Xperia Companion Software repair
flashed latest Stock ROM
flashed Lollipop Stock ROM
Phone has locked bootloader and is/was not rooted. I'm grateful for all help!
I guess its a dead screen maybe u droped it and the pins of the screens got ejected from the motherboard.. Ignoring the fact that it was empty of charge and you charged it.
From what i understand that the phone is working but there is no screen.
The best thing u can do is to check a hardware store that is capable of diagnosing the issue.
Im not helping here i know but wanted to share my thoughts..
Gd luck with that.
Thanks for this anyway. But phone didn't drop.
The fact that the phone wasn't charging and got hot instead at the beginning is very irritating. Especially that it wasn't the front but a point at the back near the camera. Is there a way to check if it's a Display issue and not a Mainboard/Processor/other Chip issue?
At least in Germany are a lot of stores that aren't too competent at all. But nobody would tell you, so its very helpful to know as much as possible before going to a store.
I think it might have something to do with the gpu inside the soc? The heat might have burned something inside the mainboard (how hot was it btw, like running intensive apps or even hotter than that?) Another thing that might have happened is the display cable is loose.
I've seen some Z5's screens and they're not that easy to die.
The best thing I can suggest is that you repair it in a trusted shop that lets you observe the repair procedure directly (open the phone, take the parts out, identify the problem).
Good luck with your phone.
colorado48 said:
I think it might have something to do with the gpu inside the soc? The heat might have burned something inside the mainboard (how hot was it btw, like running intensive apps or even hotter than that?) Another thing that might have happened is the display cable is loose.
I've seen some Z5's screens and they're not that easy to die.
The best thing I can suggest is that you repair it in a trusted shop that lets you observe the repair procedure directly (open the phone, take the parts out, identify the problem).
Good luck with your phone.
Click to expand...
Click to collapse
I never played any game so it is hard to compare, but I never had a phone in my hands that got this hot before. You didn't get instantly burned touching the phone but it was already inconvenient hot for your fingers/hand.
There might be some trust able stores to find, but I doubt somebody will let you observe it, not even Apple store does. If you see the trick of how to repair it easy and fast, you might do it yourself next time. And it is also a question of the price. If I can buy a used but totally unharmed Z5 for the same price, why should I let it repair?
As far as I could see in Germany repairing Display starts at 99€ for the Z5. Buying display with adhesive would start at 49€. But if they change the Display and it's still broken you have to pay for the Display and also for the mainboard i.e.