Not sure how many would read such a long post for a question, but here goes...
Any help is appreciated!!
1. Problem
In short, I plugged in my Nexus 5 to my laptop in MTP mode, it does not show up in "My Computer".
I just wanted to transfer files to my phone via USB, not even using ADB yet.
I have yet to solve the problem after googling around for a bit.
Relevant XDA threads that I remember reading are this, this, this, this and this.
I have tried numerous combinations of (un)plugging my phone / (un)installing drivers / rebooting my laptop and phone / switching usb ports / turning USB debugging on and off / connect in PTP mode / ...
As a workaround, I am now transferring files using the AirDroid app, which is really convenient with acceptable speed.
Still, it would be nice to know why the problem occurred and see if others have similar problem.
Below I will describe the devices I have on hand and more details on the failures I have encountered will follow.
2. My Devices
A. an old Galaxy Note
B. the new Nexus 5 with the stock micro USB cord
C. new laptop
- 64-bit Windows 8 Pro (not upgraded to 8.1 yet)
- only USB 3.0 ports
D. old laptop
- 32-bit Windows XP Home
- only USB 2.0 ports
3. Details
Scenario A. Nexus 5 not showing up in "My Computer"
Naturally, the first thing I tried is to simply plug my Nexus 5 in to my new laptop. I was used to Android devices working just like that!
However, my Nexus 5 does not show up in "My Computer" after a loooong wait.
On a closer look, my Nexus 5 (only) appears in the "Device Manager" under "Portable Devices" as "MTP USB Device".
It shows my device to be "working properly". However, I cannot uninstall/disable it when my phone is plugged in (normal?)
Frustrated, I decided to unplug my phone. I have the option to "Unplug Nexus 5" under "Safely Remove Hardware", but the operation always times out, so I simply unplugged it.
Then I tried with my Note using the same cable. It works flawlessly either in MTP mode or Mass Storage mode.
Scenario B. Nexus 5 shows up, but is really sloooooooooooooow
At some point, I turned on USB debugging.
With USB debugging on, my phone appears under "Portable Devices" as "Nexus 5" (and in some other places according to what drivers I have installed).
I was quite pleased for a few seconds as my Nexus 5 now shows up in "My Computer"!
However, it took a few minutes to list the folders I have under my phone's internal storage.
Attempting to copy a 12MB file to it gives an estimated time of over 2 hours.
Scenario C. Success?
After tinkering with it for some time to no avail, I was beginning to worry if I have gotten a defective hardware.
Then I remembered I had an old laptop stashed somewhere, so I tried connecting my Nexus 5 to that.
And... voila! It works without a hitch (MTP mode, USB debugging off).
A maybe useful note is that I have used both the old and new laptops to transfer files to my Note before.
4. Possible causes
While many seems to have solved the issue by simply unplugging and letting Windows reinstall the drivers, I have no such luck.
I sincerely hope that it is not due to any hardware defects since
a) my Note can talk to my new laptop through the same micro USB with no problems, and
b) my Nexus 5 can talk to my old laptop.
I feel that this is a driver-related issue but I am not sure.
Is it possible that there are compatibility issues with using USB 3.0 port (which should be backward compatible...) or a 64-bit Win 8 Pro?
Any help is appreciated!
It is so strange..
I just bought a USB 2.0 hub and connected my phone to my new laptop through it.
Guess what... it works perfectly!
Apparently my problem was that my new laptop only had USB 3.0 ports for me to test on?
Doesn't make sense... thought 3.0 is backward compatible and my old Note works on it!
Maybe I'm missing something but I'm happy it is solved for me now
This solution worked for me. Go to http://forum.xda-developers.com/showthread.php?t=2512549 and see post #5. Be sure to thank n7of9 for the link and WugFresh for his toolkit solution. Enjoy.
Hey,
I basically seem to have the same problem as you do.
My laptop also only has USB 3.0 ports and Windows 8.1 Pro 64-bit installed.
The Nexus 5 doesn't get installed, in MTP mode it is just shown with the yellow exclamation mark in Device Manager. Downloading different USB drivers including Google's and trying to manually install it doesn't work at all. I specifically checked that all older similar drivers are gone, so I doubt that older Android devices could be interfering.
On the other hand, as you noted, using an older computer with USB 2.0 works perfectly, I had the same result.
To be honest, I'm not much of a developer or Android tinkerer, so I'm not really making any progreess... In the end, I think I will follow your example and test it with a USB 2.0 adapter.
Did you manage to get it to work without this workaround?
Kind regards! :fingers-crossed:
I'm using Linux Mint. Just plug the Nexus in. It shows up as a folder. No hassle
Sent from my Nexus 5
SabinSnorlax said:
Hey,
I basically seem to have the same problem as you do.
My laptop also only has USB 3.0 ports and Windows 8.1 Pro 64-bit installed.
The Nexus 5 doesn't get installed, in MTP mode it is just shown with the yellow exclamation mark in Device Manager. Downloading different USB drivers including Google's and trying to manually install it doesn't work at all. I specifically checked that all older similar drivers are gone, so I doubt that older Android devices could be interfering.
On the other hand, as you noted, using an older computer with USB 2.0 works perfectly, I had the same result.
To be honest, I'm not much of a developer or Android tinkerer, so I'm not really making any progreess... In the end, I think I will follow your example and test it with a USB 2.0 adapter.
Did you manage to get it to work without this workaround?
Kind regards! :fingers-crossed:
Click to expand...
Click to collapse
I had a lot of issues with my S3 and my work computer (windows XP SP3) and it was because I had half installed some USB driver that windows tried installing.
I fixed the problem in device manager by manually uninstalling EVERY SINGLE USB DEVICE attached to the computer while I had my phone plugged in.
Word of caution: You'll probably uninstall your mouse/keyboard doing this.
Once everything was uninstalled I reinstalled the Samsung drivers and it worked fine.
The same computer only required me to install the Google drivers for my N5. If I enable USB debugging, I all of a sudden can't install MTP drivers, but USB debugging disabled works fine.
USB & MTP mode
I have the same problem with my Nexus 5. The only workaround to transfer files to my phone from a computer via USB cable is to enable USB debuging, set the phone to PTP mode instead of MTP and then it shows in My Computer as a camera. I can only access the DCIM and Pictures folders but for now I have to settle for this...I copy all the files I need to let's say Pictures and then using a file explorer (on the phone) I cut and paste them to the folders I wish...e.g. movies to Movies, music to Music and so on...
I had same problem. Developer Mode...USB Debugging ON worked.
I have this problem too, but I got it to work using a galaxy s3 cable. for some reasons the cable that came with N5 did not work.
Its usually just missing drivers.. You can get them straight from Google or a toolkit as mentioned! (P.s you need to download a little applet like thing from Google if you want to hook up your Mac to your n5)
See andoid.com/filetransfer for the drivers.
This worked for me when all else failed: http://forum.xda-developers.com/showpost.php?p=35854664&postcount=7
Hope that helps!
The problem I am having now connecting is that my phone got wet recently. I dried it immediately and used dessicant to withrow the water and now it works (sort of). Now when I plug my phone into my pc, the usb debugging icon doesn't even show up.
I tried connecting to both my work pc and home laptop and they both say the same thing, that the usb device has malfunstioned and that windows doesn't recognize it.
Is it time for a new phone?
islandboy_2000 said:
The problem I am having now connecting is that my phone got wet recently. I dried it immediately and used dessicant to withrow the water and now it works (sort of). Now when I plug my phone into my pc, the usb debugging icon doesn't even show up.
I tried connecting to both my work pc and home laptop and they both say the same thing, that the usb device has malfunstioned and that windows doesn't recognize it.
Is it time for a new phone?
Click to expand...
Click to collapse
Sounds like the usb is shorting. How long did you let it dry. Give it more time and try it again.
jd1639 said:
Sounds like the usb is shorting. How long did you let it dry. Give it more time and try it again.
Click to expand...
Click to collapse
Yeah maybe thats what happened. It's been drying now for about a week. The screen was the major problem at first but has since dried there mostly.
Hopefully it will come back. Would suck to have to buy a new phone because of that.
Thanks. :good:
MTP connecting problem solved
Going back to the subject of the thread: I am pretty sure that ADB drivers and SDK (I am confident that a lot of nexus users have their devices rooted and that means they must have the above installed) is what is causing some sort of conflict when trying to connect the Nexus 5 as MTP. After I reinstalled the windows (W8) on my computer and connected my Nexus 5 it took @1-2 minutes to auto install the drivers and then worked fine...I have no ideea what happens if I install ADB and SDK again...
ASepi said:
Going back to the subject of the thread: I am pretty sure that ADB drivers and SDK (I am confident that a lot of nexus users have their devices rooted and that means they must have the above installed) is what is causing some sort of conflict when trying to connect the Nexus 5 as MTP. After I reinstalled the windows (W8) on my computer and connected my Nexus 5 it took @1-2 minutes to auto install the drivers and then worked fine...I have no ideea what happens if I install ADB and SDK again...
Click to expand...
Click to collapse
If you tell the SDK not to install the drivers it'll be fine
The simplest and shortest way to connect google nexus5 with PC as MTP(Media device)
When I plugged it, there wasn't any yellow exclamation mark within Device Manager. So for me, the drivers were OK. But the device was not listed within my Eclipse DDMS. After a little bit of searching, it was just an option to change in the device settings. By default, the Nexus 5 USB computer connection is in MTP mode (Media Device).
What you have to do is:
Unplug the device from the computer
Go to Settings -> Storage.
In the ActionBar, click the option menu and choose "USB computer connection".
Then select Media device(MTP) or Camera(PTP) based on your requirement...
Plug the device and you should have a popup on the device allowing you to accept the computer's incoming connection..
I hope this will help!
njoy
Resolved. nexus 5 PC Connectivity
hackdisk said:
Not sure how many would read such a long post for a question, but here goes...
Any help is appreciated!!
1. Problem
In short, I plugged in my Nexus 5 to my laptop in MTP mode, it does not show up in "My Computer".
I just wanted to transfer files to my phone via USB, not even using ADB yet.
I have yet to solve the problem after googling around for a bit.
Relevant XDA threads that I remember reading are this, this, this, this and this.
I have tried numerous combinations of (un)plugging my phone / (un)installing drivers / rebooting my laptop and phone / switching usb ports / turning USB debugging on and off / connect in PTP mode / ...
As a workaround, I am now transferring files using the AirDroid app, which is really convenient with acceptable speed.
Still, it would be nice to know why the problem occurred and see if others have similar problem.
Below I will describe the devices I have on hand and more details on the failures I have encountered will follow.
2. My Devices
A. an old Galaxy Note
B. the new Nexus 5 with the stock micro USB cord
C. new laptop
- 64-bit Windows 8 Pro (not upgraded to 8.1 yet)
- only USB 3.0 ports
D. old laptop
- 32-bit Windows XP Home
- only USB 2.0 ports
3. Details
Scenario A. Nexus 5 not showing up in "My Computer"
Naturally, the first thing I tried is to simply plug my Nexus 5 in to my new laptop. I was used to Android devices working just like that!
However, my Nexus 5 does not show up in "My Computer" after a loooong wait.
On a closer look, my Nexus 5 (only) appears in the "Device Manager" under "Portable Devices" as "MTP USB Device".
It shows my device to be "working properly". However, I cannot uninstall/disable it when my phone is plugged in (normal?)
Frustrated, I decided to unplug my phone. I have the option to "Unplug Nexus 5" under "Safely Remove Hardware", but the operation always times out, so I simply unplugged it.
Then I tried with my Note using the same cable. It works flawlessly either in MTP mode or Mass Storage mode.
Scenario B. Nexus 5 shows up, but is really sloooooooooooooow
At some point, I turned on USB debugging.
With USB debugging on, my phone appears under "Portable Devices" as "Nexus 5" (and in some other places according to what drivers I have installed).
I was quite pleased for a few seconds as my Nexus 5 now shows up in "My Computer"!
However, it took a few minutes to list the folders I have under my phone's internal storage.
Attempting to copy a 12MB file to it gives an estimated time of over 2 hours.
Scenario C. Success?
After tinkering with it for some time to no avail, I was beginning to worry if I have gotten a defective hardware.
Then I remembered I had an old laptop stashed somewhere, so I tried connecting my Nexus 5 to that.
And... voila! It works without a hitch (MTP mode, USB debugging off).
A maybe useful note is that I have used both the old and new laptops to transfer files to my Note before.
4. Possible causes
While many seems to have solved the issue by simply unplugging and letting Windows reinstall the drivers, I have no such luck.
I sincerely hope that it is not due to any hardware defects since
a) my Note can talk to my new laptop through the same micro USB with no problems, and
b) my Nexus 5 can talk to my old laptop.
I feel that this is a driver-related issue but I am not sure.
Is it possible that there are compatibility issues with using USB 3.0 port (which should be backward compatible...) or a 64-bit Win 8 Pro?
Any help is appreciated!
Click to expand...
Click to collapse
Hello !!!
I faced the same problem with mine...
Couldn't connect my phone with my laptop.
It installs the driver but not displaying the folder in my computer.
I uninstalled the Existing samsung driver in control panel.
Then the issue has been solved,
Or uninstall previous mobile's drivers
Try this!?!
Search for Universal Driver here in XDA. Had the same problem most of you are having. First try and BAM! Works like a champ...
NEXUS 5
Problem solved for me
I have no more issues what-so-ever after I unninstalled ADB & SKD drivers...Windows(8) installed my phone by itself after a restart and it works as it should in MTP mode and PTP mode.
Hello everyone.
I am having issues with my Note being detected by my PC, I have installed Kies 3 and when the Note is connected the connection process starts but fails ( I tried using camera mode instead of MTP and Kies says It must be MTP so something is connecting), Also the device is detected in the device manager of the PC and the Note itself says its connected by USB 3.0.
I have updated, un-installed re-installed, all the drivers and Kies. I have also used a standar USB 2 cable and most of the ports on my PC.
Does anyone know what's going on? could it be a USB 3 issue with Windows?
Any help would be appreciated.
Cheers
Gav
I've been having consistent issues connecting with the tablet through adb, on both linux (2 separate installs), and windows 8.1. Sometimes it just will not detect it. It gets detected as mtp storage fine, but adb devices returns nothing. Ill triple check all the relevant settings, make sure the computer has been authorized by the tablet etc. It will literally work just fine, and then 10 minutes later without even disconnecting the cable to using the tablet, it will no longer be detectable by adb.
I'm hoping it's just bugs in the release firmware that haven't been ironed out yet, and will disappear with future upgrades or with the flashing of a custom rom.
I've also had it refuse to charge through my laptops USB ports, even the special "faster charging" port.
It turns out my issue was the unit itself I took it back to JB-HiFi and the staff checked it out and it wouldn't connect to any of their PCs, we tried the Demo unit and it worked fine, So i exchanged it and it works perfectly..
Thanks for your reply though
Cheers
Gav
I've had my OPO for a little over 7 months now. My issue began when I had my desktop at a friend's house and plugged my phone into a USB 3.0 port to grab some videos off the phone when the phone suddenly shut off and would not turn back on. I thought it was bricked somehow but after leaving it plugged into a USB 2.0 port for some time, the charging screen came on and I was able to turn the phone on, but since then both OTG and MTP/PTP transfer doesn't work. If/when the phone is plugged into a computer, it gives an error and Device Manager shows
"Port_#0001.Hub_#0004 Unknown USB Device (Port Reset Failed)" and I'm not only able to charge the phone with one out the dozens of micro usb cables I have. I've tried several cables and a handful of different computers and OSs (Windows 7,8,8.1,10, Ubuntu 15.04, Kali Linux) all to the same result.
I'm running COS 12.1-YOG4PAS3JL, rooted, and have TWRP installed. The phone doesn't show up when in Fastboot mode or the bootloader either. Nothing changes when I disable or enable USB Debugging as well. With DriveDroid if I set the USB system to "Standard Android" the phone reboots and that seems like the closest I've been able to get to any kind of progress. I've gone through unbricking threads as well as Googled until my fingers bled but I'm yet to find anyone with a similar situation where the phone isn't bricked, the micro usb port isn't broken, I can't pick between MTP or PTP mode (USB Connection just says USB is now disconnected), and I'm not running a custom ROM. I tried replacing the micro usb on the phone so I now know that it wasn't that that's been messed up but I'm not sure where to go from here. Any suggestions or help is greatly appreciated.
Hello, I just purchased an LG X Venture, model number H700. It is running android 7.0. When I first got it a few days ago, I installed the drivers for it on my windows 7 computer, and plugged it in. I got a pop up on the phone where I set the default USB mode to MTP (media transfer protocol). It worked great, and I was able to tranfer files between my PC and my phone.
Then I tried to get adb debugging to work with my phone, and screwed everything up. I enabled developer options, and then checked USB debugging. I also accidentally hit the "revoke USB debugging authorization button." I installed what I think are the correct ADB drivers on my PC. Then I plugged my phone back into my PC. This time, nothing comes up. I've checked in the device manager, etc., and I can't find a trace of the phone anywhere.
I looked back at developer options under USB configuration, and it's still set to MTP. But somehow I screwed something up, because my phone and computer no longer recognize each other (except for charging).
I even tried my phone with two other computers (one also windows 7, the other mac), and got the same behavior.
Any idea how to fix this? Ideally I'd like to get ADB to work, but I would settle for just getting MTP back haha.
Actually, solved it! Turns out the cable I was using was damaged. I used another one and MTP works fine on all computers.