Database Info

[ROM] [PAC] [4.4.4] - Galaxy ACE 3 LTE [UNOFFICIAL]

Succesfully compiled PAC rom for Galaxy ACE 3 LTE! It is compiled from CM11 device tree with slight modifications. Everything works like CM11, expect NFC! Rom can be used as a daily driver!
Note: PAC stands for Paranoid AOKP and CyanogenMod! It combines all the goodies in one ROM!
In my opinion it can be used as a daily driver!
Download link: https://mega.co.nz/#!F59GQLDS!ifQnca5_oRKc1VEIwcrBEbTorN024E1heQOTNOGN9vY
INSTALLATION
1.Reboot into recovery
2.Wipe data factory reset
3.Format system
4.Flash Rom
5.Flash Gapps
6.Reboot
For GT-S7275R ONLY
Do not enable PAC in black feature on settings, bugs will appear
Don't forget to say thanks
PS: I am not responsible for any damage to your device

Am installing now PAC ROM so, will taste it as long as i can handle my phone in daily use. Will report back soon.

1st bug and most importance, ROM doesn't go in to deep sleep. battery drain too fast. I think is kernel problem, need reconfigure.

This is from my phone
arrostos said:
1st bug and most importance, ROM doesn't go in to deep sleep. battery drain too fast. I think is kernel problem, need reconfigure.
Click to expand...
Click to collapse
My device seems to enter deep sleep, are you sure you had battery drain? maybe it was an process

Update
New release - 20140716
Change-log
-Using custom power HAL (Should improve battery)
-CM & AOKP sources update
-Audio config improvements and cleanup
If you are already on a PAC release you don't need to wipe anything!
Download: https://mega.co.nz/#!85USyJIQ!pDku4mr5Vvk-fmZbSNsL8KvP8klPEgwqczV5CdqDVcs

kostoulhs said:
New release - 20140716
Change-log
-Using custom power HAL (Should improve battery)
-CM & AOKP sources update
-Audio config improvements and cleanup
If you are already on a PAC release you don't need to wipe anything!
Download: https://mega.co.nz/#!85USyJIQ!pDku4mr5Vvk-fmZbSNsL8KvP8klPEgwqczV5CdqDVcs
Click to expand...
Click to collapse
Very nice job, i didn't test it yet, but want to tell some bugs on preview release.
Touch sensitive is not good enough, some times need to touche twice on same place to can recognize.
Had 3-4 times crash, on Torch, wile was trying to put lite one, but after the crash is started to work okay. Same happened on GPS Location, wile switching on/off.
Some times the home button doesn't wake up the phone, navigation buttons are lighting but screen doesn't turn on.
And about Deep Sleep, yes after some restarts, now is working
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
BTW, the phones works very fast with CM, it' amazing so much improve against Touch Wiz

arrostos said:
Very nice job, i didn't test it yet, but want to tell some bugs on preview release.
Touch sensitive is not good enough, some times need to touche twice on same place to can recognize.
Had 3-4 times crash, on Torch, wile was trying to put lite one, but after the crash is started to work okay. Same happened on GPS Location, wile switching on/off.
Some times the home button doesn't wake up the phone, navigation buttons are lighting but screen doesn't turn on.
And about Deep Sleep, yes after some restarts, now is working
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
BTW, the phones works very fast with CM, it' amazing so much improve against Touch Wiz
Click to expand...
Click to collapse
Thanks for feedback :good:

The problem is on android systemui, some times when am trying to open a new application, the message popa-up "Unfortunately, the process com.android.systemui has stopped. Blame the Split Screen"

arrostos said:
The problem is on android systemui, some times when am trying to open a new application, the message popa-up "Unfortunately, the process com.android.systemui has stopped. Blame the Split Screen"
Click to expand...
Click to collapse
did you enable Pac in black? if yes disable it! it is a buggy feature

kostoulhs said:
did you enable Pac in black? if yes disable it! it is a buggy feature
Click to expand...
Click to collapse
Yes, it was enabled. I think this is response on wake up phone too.
What, about the camera, whenever i press Volume up or down, it's taking a picture and there is no zoom. It's CM camera working like that?

arrostos said:
Yes, it was enabled. I think this is response on wake up phone too.
Click to expand...
Click to collapse
Maybe, I like Pac in black, but i do not use it because of the bugs

For Gapps, we use the same as CM11, right?
Enviado desde mi GT-S7275R usando Tapatalk 2

Arcanister99 said:
For Gapps, we use the same as CM11, right?
Enviado desde mi GT-S7275R usando Tapatalk 2
Click to expand...
Click to collapse
yes, right but you can also use lite gapps from here which are ART compatible
Link: http://forum.xda-developers.com/showthread.php?t=2608800

arrostos said:
Yes, it was enabled. I think this is response on wake up phone too.
What, about the camera, whenever i press Volume up or down, it's taking a picture and there is no zoom. It's CM camera working like that?
Click to expand...
Click to collapse
!!

arrostos said:
!!
Click to expand...
Click to collapse
For camera try using a third party app, i think CM camera app does not zoom

kostoulhs said:
For camera try using a third party app, i think CM camera app does not zoom
Click to expand...
Click to collapse
I tried to install google camera hd camera and Camera JB+, the same problem, there is no zoom function. but is ok, it's not so important problem.
One more problem with camera, when you rotating the camera is freezing especially on video recording.

New release
New build 20140720
Changelog (Same as CM)
Voip Fix
CM and PAC source Update
Kernel Sources Update
Add Dock Headset to audio policy
Download Link: https://mega.co.nz/#!cld2DbZZ!v7sbR4IHLqM5GKv2xPU-edkfTxz6BCNXHpok-tPzlUE

GT-s7272
Can you modify them to work on Gt-S7272

CartoonizedAmr said:
Can you modify them to work on Gt-S7272
Click to expand...
Click to collapse
Absolutely different chipset, impossible, for me at least

kostoulhs said:
Absolutely different chipset, impossible, for me at least
Click to expand...
Click to collapse
plz That's easy for you, and this is open source http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=GT-S7275

[APP] [ROOT] [7.1+] Oneplus 3/3t Control Center || All ROMs [07 MARCH]

Hey guys
This app is a result of me getting tired of some roms providing some features and some not.
So I created the PocketMode app in almost 6 hrs and it was my first android app.
This is the second iteration of the app and is completely revamped and greatly improved(I mean a lot....lot).
FEATURES:
1) Disables all enabled gestures and the fingerprint sensor while in pocket.
2) Full control of your phone's pocketmode service.
3) You won't see the fingerprint sensor getting unresponsive sometimes. Greatly improved the pocketmode part of the app.
4) You can toggle all the available gestures
5) Swap Home and Back Buttons
6) A little bit of theming
7) Starts automatically at boot, so you don't need to do anything except grant superuser rights.
8) HBM and sRGB modes included.
9) It works. 'nuf said !!
INSTRUCTIONS:
1) Download the apk from the second post.
2) Install like normal app.
3) open it for first time and grant root access.
4) Then enjoy the great UI
NOTE:
1) It performs perfectly fine in presence of other conflicting apps, like the cyanogenmod/LOS shipped pocketmode app. But I would suggest if you find the performance better of this one, then either uninstall the other app or freeze it because of redundancies in the system.
2) Although I've tested this rigorously, still bugs may be found and you may report them here.
HUGE SHOUTOUT OUT TO YETI-DESIGNS for the 2 amazing icons on this app. @Yeti12​

Downloads, Sreenshots and Changelog
DOWNLOAD FROM HERE​
Changelog:
V1.0.0 :: 08-02-2017
LOOK FOR YOURSELVES.
V1.2.0 :: 06-03-2017
1) Added option to disable the "Double Tap power button to launch camera" while in pocket.(if your ROM supports it)
2) SUPORT for OxygenOS is added although the features are very limited as OOS handles everything quite well already.
3) Added Sweep2Wake toggles.
4) Added option to restore settings on boot on each page.
5) Various cosmetic changes.
6) Added 2 new icons. All thanks to @Yeti12 (look in the screenshots)
7) Squashed many bugs here and there
8) Many performance updates.
V1.2.1 :: 07-03-2017
1) Fixed force closing on OpenBeta 7.1.1​
NOTE :: Uninstall the previous app(if you have it) before installing this.

Nice, I will definitely try it

"No mirrors found"
Sent from my OnePlus3 using XDA Labs

Unn113 said:
"No mirrors found"
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Yup. Can confirm this.
EDIT: Could find some by refreshing the page a few times.
If this works, I works kiss the dev if I could.

Unn113 said:
"No mirrors found"
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Just refresh and try again

OP updated for attachment, those who have issues on AFH.

@rituj26
Thanks mate, works perfectly.
Only small cosmetic bug, the startup screen is to big, it does not show all the toggles. I can not scroll down. ( screenshot attached)
Thanks again for this fix.
Regards ysco..

ysco said:
@rituj26
Thanks mate, works perfectly.
Only small cosmetic bug, the startup screen is to big, it does not show all the toggles. I can not scroll down. ( screenshot attached)
I put the file on mega as extra link for the ones that have problems downloading it. Let me know if you want me to remove it.
https://mega.nz/#!TwcjyBAK!l4CKRaVHEzQeFFMPPLOVEWVKXJa3BcgWFKSKOj5RhLc
Thanks again for this fix.
Regards ysco..
Click to expand...
Click to collapse
Oops, sorry. Since I have a low DPI, all of it fits on my screen. Will look into it ASAP.
And you'll have to remove the mirror please.
Thanks.

@ysco
Fixed.
Please remove the link.

rituj26 said:
Oops, sorry. Since I have a low DPI, all of it fits on my screen. Will look into it ASAP.
And you'll have to remove the mirror please.
Thanks.
Click to expand...
Click to collapse
Erm, you need to edit your post too, to remove the link

Link removed.
Thanks for the quick reply and for fixing it.
Regards ysco..

siankatabg said:
Erm, you need to edit your post too, to remove the link
Click to expand...
Click to collapse
Hahahaha xD

wow !! Thanx man for this aw featured app

HatRiGt said:
wow !! Thanx man for this aw featured app
Click to expand...
Click to collapse
Glad you like it.

I can't install on oos 4.02

Luca222 said:
I can't install on oos 4.02
Click to expand...
Click to collapse
You don't need to. The fingerprint sensor and pocket mode works flawlessly on OOS.

Great work man! Keep your nice work up !

Luca222 said:
I can't install on oos 4.02
Click to expand...
Click to collapse
Yeah the OOS pocketmode is perfect. But this does the job pretty well.

You're awesome man! Now goodbye OOS

(HELP!!!)(URGENT!!!)Led light won't turn off, even when switched off

My Moto g3 2015 rooted has the following issue
Led always on and not able to turn it off. Tried Moto led control app but it didn't fix. Tried reboots wiping cache etc.

could you provide more information that you're on which device Model (Osprey / Merlin), Which variant 1GB / 2GB & Which ROM (Stock / Any custom ROM)

Viper 3.0, osprey, magisk v14,1gb variant

rahul9999 said:
could you provide more information that you're on which device Model (Osprey / Merlin), Which variant 1GB / 2GB & Which ROM (Stock / Any custom ROM)
Click to expand...
Click to collapse
Did you have this issue

tom jp said:
Did you have this issue
Click to expand...
Click to collapse
I'm not sure as I'm not on this Rom.. could you check if below option is there in you're Rom
Go to settings - notifications - click on top right side settings like wheel (If it is there) - & see if there is any option called Battery light

rahul9999 said:
I'm not sure as I'm not on this Rom.. could you check if below option is there in you're Rom
Go to settings - notifications - click on top right side settings like wheel (If it is there) - & see if there is any option called Battery light
Click to expand...
Click to collapse
I don't think it's a problem associated with the rom

tom jp said:
I don't think it's a problem associated with the rom
Click to expand...
Click to collapse
I'm not saying it's problem of ROM.. Anyways have you seen that option which i said in my earlier post..

rahul9999 said:
I'm not saying it's problem of ROM.. Anyways have you seen that option which i said in my earlier post..
Click to expand...
Click to collapse
Doesn't work, but when I turn off that option led became dimmer

tom jp said:
Doesn't work, but when I turn off that option led became dimmer
Click to expand...
Click to collapse
ok.. after flashing this ROM have you ever seen any option to disable battery light in settings?

rahul9999 said:
ok.. after flashing this ROM have you ever seen any option to disable battery light in settings?
Click to expand...
Click to collapse
I disabled it in the settings, but has no use

MiUI 10 for Cool 1 Dual v8.7.26 STABLE

Note:- Since it is my first post, links have been disabled my XDA TEAM, so please copy paste in your browser to open. Thank You for understanding
Hi guys!! Whats up. This is Shwetank here from Tech Stuff. Most of you might know me. For the ones who don't know me, please search on YouTube as "Tech Stuff".
This ROM is a port from Xiaomi Redmi Note 3 Pro(Kenzo)'s MiUI 10 V8.7.26 Chinese Alpha. And that's why there are only 5 languages in this ROM including English, Mandarin.......
I want to thank @ycjeson for his various libs to make the ROM run at a very stable condition.
Since this ROM was Chinese, it took me a lot of time to remove all the Chinese Bloatware and add Google Apps in it.
What's Working:---
1) EVERYTHING
Bugs:-----
1) VoLTE is not working VoLTE working in new version. Check here
2) GPS is not very accurate ( I'm working to fix that) ISSUE FIXED
Just Open the compass app and rotate your phone several times in all the directions along its axis. And restart your phone. GPS will work fine.
3) Brightness Issue (Completely dark in lowest level, Not too bright at Highest level. Solution to this issue is using Boot Shell method which can be found on my YouTube Channel.
Just disable auto brightness to get stock ROM like brightness
If you get any other issues, comment down below....
Download Link:--https://androidfilehost.com/?w=files&flid=279792
Donation:--
If you liked my work and if you want to donate, then that will be highly appreciated
Pay pal eMail- [email protected]
UPI address- [email protected]
Note:-- I'll not be responsible if anything wrong happens to your device during the process.
Installation Video- https://youtu.be/08YRFj_FtsI

:good:...cool bro

Fix
First fix all the bugs then i will definitely donate you.

andruha10010 said:
:good:...cool bro
Click to expand...
Click to collapse
Thanks. Hope you've liked the ROM ?

amitb3669 said:
First fix all the bugs then i will definitely donate you.
Click to expand...
Click to collapse
Fixed GPS and highest brightness issue.
Only VoLTE needs to be tested.
Everything is working fine.

Marshmallow?
Is this Marshmallow?
IR blaster working?
SLR working?
Installation instructions?

zekedran said:
Is this Marshmallow?
IR blaster working?
SLR working?
Installation instructions?
Click to expand...
Click to collapse
Yes. It's marshmallow. No SLR camera.
Install it over Android 6. Wipe everything except internal storage> flash it

you can read more about the installation please. Installed the firmware and the system does not boot, just reboots into the recovery. What to do?

romanov.zheka13 said:
you can read more about the installation please. Installed the firmware and the system does not boot, just reboots into the recovery. What to do?
Click to expand...
Click to collapse
Did you install this over Jui??

techstuff_18 said:
Did you install this over Jui??
Click to expand...
Click to collapse
no, of course, on EUI.

romanov.zheka13 said:
no, of course, on EUI.
Click to expand...
Click to collapse
Wipe everything and try flashing again.
Because for most of us, this process worked.
If you're stuck at mi logo, then press the power button for 10 seconds to boot again

Google Contact has issued
I cant sync google contacts. How to fix that.

Multiscreen?
Does this have the multi screen option?

bonsoljoshua said:
Does this have the multi screen option?
Click to expand...
Click to collapse
yes

Hi, rom looks great but I have brightness problem.
Disabled auto brightness, slider to max but still very dark.
c106 model

mulyono24 said:
I cant sync google contacts. How to fix that.
Click to expand...
Click to collapse
Hello, I've released a new version which has contacts sync. Please download and use that
https://forum.xda-developers.com/android/general/miui-10-v8-8-7-volte-cool-1-dual-t3828523

Pls halp me to install magisk in this room pls halp

Cool 1 camera
Please tell me how to install cool 1 camera in this miui 10

is the camera app in this rom has the slow motion and 4K support ??

Hi,
Is this ROM for the LeEco Cool 1 C103 or for the LeEco Cool 1 C106?
Thank you

PARANOID QUARTZ 10 Beryllium 20191112 IS OUT

Hello
new Paranoid Quartz 10 Beryllium 20191112 dev is on the way:good:

yes tested that build from tg, pubg run ultra smooth on hdr settings, love it thanks to dev , only bug i foundiz wifi is broken, whenver i connected to wifi its rebooting again n again
Edit : wifi working flawlessly

Hmm, WiFi is pretty much fundamental... ?

xVikramx said:
yes tested that build from tg, pubg run ultra smooth on hdr settings, love it thanks to dev , only bug i foundiz wifi is broken, whenver i connected to wifi its rebooting again n again
Click to expand...
Click to collapse
What's TG?
I want to check it out. Could you point me to the link?

xVikramx said:
yes tested that build from tg, pubg run ultra smooth on hdr settings, love it thanks to dev , only bug i foundiz wifi is broken, whenver i connected to wifi its rebooting again n again
Click to expand...
Click to collapse
Screenshots please!

xVikramx said:
yes tested that build from tg, pubg run ultra smooth on hdr settings, love it thanks to dev , only bug i foundiz wifi is broken, whenver i connected to wifi its rebooting again n again
Click to expand...
Click to collapse
Link plz?

Hy
i flash vendor Q zip and Paranoid image .........bootloop........
vendor Q zip shows (no suchfile or directory)---
https://sourceforge.net/projects/shivatejapeddi/files/PA/
https://drive.google.com/file/d/1AepodLTr6Cw_iot-y15z7rogB0d4UdGz/view
Instructions to flash:
- Wipe System, Data, Dalvik, Cache.
- Flash ROM.
- Flash Q Vendor.
- Flash Gapps.
- Reboot

Hy
the Q-Vendor zip dont work??
need flash firmware and Q-Vendor????
Regards

googlespy said:
Hy
the Q-Vendor zip dont work??
need flash firmware and Q-Vendor????
Regards
Click to expand...
Click to collapse
Working fine here.
Reboot to recovery after flashing q vendor then flash ROM and gapps.
I needed to force reboot for initial boot.

Martensite said:
Working fine here.
Reboot to recovery after flashing q vendor then flash ROM and gapps.
I needed to force reboot for initial boot.
Click to expand...
Click to collapse
ok thanks mr.
my recovery beta8 is buggy......
i try another recovery vendor q works
i reboot 2 times PARANIOD Image work great:good:
only i cant hide search bar
Thanks to the DEV...........

Last Optimus Drunk Kernel and Paranoid Image super combination:good:

googlespy said:
Last Optimus Drunk Kernel and Paranoid Image super combination:good:
Click to expand...
Click to collapse
whats not working and whats the battery screen on time??

ron_hyatt said:
whats not working and whats the battery screen on time??
Click to expand...
Click to collapse
almost everything works

AndroZeek said:
almost everything works
Click to expand...
Click to collapse
can you name things thats not working beside not being able to hide search bar??!!
battery screen on time???

ron_hyatt said:
can you name things thats not working beside not being able to hide search bar??!!
battery screen on time???
Click to expand...
Click to collapse
Almost no customization option.
Three finger ss. double tap gesture while screen is off. That's all.
No statusbar double tap to sleep.
7.48%/hr on my use.
You can use lawnchair with quickswitch module btw.

That's awesome news!

1) Is sellinux enforcing in the latest build?
2) Does double tap to sleep and 3 finger swipe screen shot work?
3) Does it support substratum?
what is the meaning of "QUARTZ" IN BUILD NAME? Is this from the same developers that created paranoid android beta for our poco f1?

Some screenies would be much appreciated from everyone who's trying. Specially of sot

Ali Naqi said:
Some screenies would be much appreciated from everyone who's trying. Specially of sot
Click to expand...
Click to collapse
Here
1128build
sot is light gaming+video playback.

Martensite said:
Here
1128build
sot is light gaming+video playback.
Click to expand...
Click to collapse
Is it necessary to flash Q vendor to install the ROM?
Can you explain the steps of installation?