Related
Dolby atmos available for our lovely Whyred
Link-https://drive.google.com/file/d/1ObEm2448-8HKv_AVjDPZRjTO0ruB-de0/view?usp=drivesdk
Just boot to twrp and directly flash this file and reboot
Working on global stable, beta, masik 1.3+ , miui pro and miui.am roms
Thanx
Not working on miui 9.2.13.0 (NEIMIEK) in redmi note 5 pro indian devices with Magisk .
App crashes when opened.
Please post a dolby port which is working in nougat with magisk.
I tried all dolby magisk modules non worked.
MIUI 10 compatible?
KokoReyes said:
MIUI 10 compatible?
Click to expand...
Click to collapse
Yes
vigneshjack3 said:
Not working on miui 9.2.13.0 (NEIMIEK) in redmi note 5 pro indian devices with Magisk .
App crashes when opened.
Please post a dolby port which is working in nougat with magisk.
I tried all dolby magisk modules non worked.
Click to expand...
Click to collapse
Download the Dolby atmos zip from above link
And
Flash it by Twrp not by magisk
riteshbhoria03 said:
Yes
Click to expand...
Click to collapse
Can you explain in details?
Yesterday i flashed a dolby atmos zip in miui 10 and ended up in bootloop. Had to flash fastboot ROM.
So i want to ask these things-
-Can you post screenshot of app UI so that we can be sure that it's opening and not crashing?
-Do i need to disable Stock audio fx before flashing it?
-Which twrp did you used?
-Which magisk did you used.Beta or stable?
Thanks.
KuldeepShivankar said:
Can you explain in details?
Yesterday i flashed a dolby atmos zip in miui 10 and ended up in bootloop. Had to flash fastboot ROM.
So i want to ask these things-
-Can you post screenshot of app UI so that we can be sure that it's opening and not crashing?
-Do i need to disable Stock audio fx before flashing it?
-Which twrp did you used?
-Which magisk did you used.Beta or stable?
Thanks.
Click to expand...
Click to collapse
I flashed the given link from twrp + flashed lazyflasher
you need magisk 16.0, it's not working with 16.4, if you have installed Viper, download audio modification library from magisk, as suggested during the installation.everything workd fine, thanks
macacomachec said:
you need magisk 16.0, it's not working with 16.4, if you have installed Viper, download audio modification library from magisk, as suggested during the installation.everything workd fine, thanks
Click to expand...
Click to collapse
I flashed it via twrp and i have magisk 16.0 installed but after flashing i don't hear any difference in sound.
I don't have AML module installed. Also how can i uninstall dolby if i want to completely uninstall it?
KuldeepShivankar said:
I flashed it via twrp and i have magisk 16.0 installed but after flashing i don't hear any difference in sound.
I don't have AML module installed. Also how can i uninstall dolby if i want to completely uninstall it?
Click to expand...
Click to collapse
Download link2sd
Grant root access
Locate dolby atmos and select uninstall
Reboot
Finish
riteshbhoria03 said:
I flashed the given link from twrp + flashed lazyflasher
Click to expand...
Click to collapse
Okay. Thanks.
-Do you hear any difference in sound after flashing this dolby atmos?
-Did you uninstalled/disbale stock audio fx before flashing it?
KuldeepShivankar said:
Okay. Thanks.
-Do you hear any difference in sound after flashing this dolby atmos?
-Did you uninstalled/disbale stock audio fx before flashing it?
Click to expand...
Click to collapse
I simply install by twrp and reboot
KuldeepShivankar said:
I flashed it via twrp and i have magisk 16.0 installed but after flashing i don't hear any difference in sound.
I don't have AML module installed. Also how can i uninstall dolby if i want to completely uninstall it?
Click to expand...
Click to collapse
Have you actually turning it on ?
And, yes, disable the stock audioFX if possible
otonieru said:
Have you actually turning it on ?
And, yes, disable the stock audioFX if possible
Click to expand...
Click to collapse
Yes i turned it On but didn't hear any difference in output. I'll try one more time with disabling stock audio fx. And i'll let you know if i hear any difference.
If I flash an Update after I flashed this mod will it be overwritten and I have to flash it again after the Update?
RN5 said:
If I flash an Update after I flashed this mod will it be overwritten and I have to flash it again after the Update?
Click to expand...
Click to collapse
Yes
Not working in MIUI 10 global beta 8.6.14
not opening after installation in MIUI 10 global beta 8.6.14, not recommended until fix in next updates
I'am curious, what's the use of Dolby Atmos with a phone ?
For me it's a digital cinema technology for vertical sound in a X.1 sound system. But maybe i miss something.
Where is the link
Nothing yet?
Enviado desde mi Redmi Note 5 mediante Tapatalk
The thing is that I have installed TWRP and after successfully flashing magisk, the magisk manager says it's not installed. I've tried with several versions and same result. What I'm doing wrong? I've tried to flash SuperSu but this one gives me error.
Thanks.
try to flash again rom, i have mi mix 3 with 10.2 stable by xiaomi.eu and magisk work very well (version 18.1)
Hi I am Rupesh from India and I have redmi note 4 ie., mido smartphone with 64 GB ROM, 4 GB RAM and it is working properly. I love to use custom ROM's like AOKP, resurrection remix etc.,. Most of the time I love to listen music on my phone and so I want sound enhancers like Dolby atmos, Dolby digital plus, viper, Dirac etc.,.
From the past one year I am using my smart phone by flashing AOKP custom ROM with android version 7.0 ie., naught. I also flashed arise sound mod by selecting all of the above previously mentioned sound enhancers while installation. At present my smart phone is working properly without any errors and also sound quality is good.
I have tried to flash a lot of other custom ROM's like lineage os, resurrection remix, Aokp, fire hound etc.,. After flashing these ROMs some worked fine and some others failed in detecting sim card itself. For those ROM's which worked fine I have flashed arise sound mod by selecting all of the above previously mentioned sound enhancers. After rebooting I got errors such as "arkamys stopped working mute the device until restart", "am3d stopped working mute the device until restart " etc.,.
I have flashed the same zip file called old_arise.zip for all these custom ROM's by following the same procedure but none of these ROMs are working as good as AOKP CUSTOM ROM with android version naught.
Upto now I have examined a number of custom ROM's but I am attracted to AOKP custom ROM. At present AOKP team has released new ROM for my phone with android version Oreo and so I want to try this ROM in combination with arise sound mod.
In some website someone suggested to root the phone and after that flash magisk and after that flash magisk compatibility module and finally flash arise sound mod by selecting the option magisk compatibility to true. I have followed the above procedure and at first I have flashed AOKP custom ROM and after that flashed gapps 8.1 nano package and after booting everything worked fine. After that I have flashed magisk in twrp recovery manager and after that I have tried to flash magisk compatibility module and in this stage I got error as "magisk not found". I have flashed magisk package again and after that flashed magisk compatibility module and again I got error as "magisk not found".
May I know which is the latest best custom ROM which works properly with arise sound mod.
I am also requesting the people who have redmi note 4 I mean mido phone to flash latest AOKP custom ROM with arise sound mod. If you succeed please suggest how to flash AOKP custom ROM with arise sound mod.
Regards,
Rupesh.
@rupeshforu3 This forum is for development purposes. Go to the Q&A section.
I am here to share the patch Viper4Android on MIUI11 BASE ON ANDROID 10.
IT'S WORKING FOR ME
PRE REQUISITE
TWRP AND ROOTED also magisk is installed.
1. INSTALL SELINUX And set it to permisive, set the app on autosatart, and reboot your device
2. Install VIPER4ANDROID APK
grant root access with ask to install driver click install then reboot device.
"You will get bootloop after you install the driver just go to recovery mode by pressing volume up and power down
3. Flash Viper4Android patch on TWRP and reboot. And Viola you have now Viper4Android perfectly installed.
Selinux
https://androidfilehost.com/?fid=4349826312261708284
Viper apk
https://androidfilehost.com/?fid=4349826312261708285
Viper patch
https://androidfilehost.com/?fid=4349826312261708283
Credits to Munchy
Just subscribe to he's channel on YouTube
does it work on other android 10 base phone?
locolyric said:
does it work on other android 10 base phone?
Click to expand...
Click to collapse
Only for Miui base custom rom
It has successfully installed, but it doesn't work at all. Mi8 UD, miui 11 20.1.16, A10.
Drivers Version: 2.5.0.4
NEON: off
Driver: off
And so on...
Attach audio effect is on and writes "all sessions but 0"
Compatibility moed doesn't help.
It works for me after installed mod systemless hosts from Magisk Manager settings. Also, i enabled auto start and other permissions for Selinux and ViPER4Android FX. Didn't get any bootloops and i don't install ViPER patch with twrp. After reboot first time phone from ViPER app, you will be prompted to install again drivers. Just repeat steps. Reboot phone when you ask in app and finally you will have mod installed and enabled.You can also delete Selinux after finish. Miui 11 with android 10
Works great on miui eu 11.0.4.0
Thank you!
Nice! Works on global stable 11.0.4.0 even without patch. Took some reboots, but now it is installed and processing. Yay! Thanks!
Any one having working DTS X IN MIUI 11 Q... getting empty screen.. can you share the steps pls
Not here. Following the steps, bootloop.
Found this link. And followed same but in middle I have used that patch mentioned in this thread to resolve the boot loop issue.
Finally my viper is working.
https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-how-to-install-viper4android-t4037959
All perfect here - pocophone f1 / miui 11 android 10 / no gravity kernel last build
tatuboy said:
I am here to share the patch Viper4Android on MIUI11 BASE ON ANDROID 10.
IT'S WORKING FOR ME
PRE REQUISITE
TWRP AND ROOTED also magisk is installed.
1. INSTALL SELINUX And set it to permisive, set the app on autosatart, and reboot your device
2. Install VIPER4ANDROID APK
grant root access with ask to install driver click install then reboot device.
"You will get bootloop after you install the driver just go to recovery mode by pressing volume up and power down
3. Flash Viper4Android patch on TWRP and reboot. And Viola you have now Viper4Android perfectly installed.
Selinux
https://androidfilehost.com/?fid=4349826312261708284
Viper apk
https://androidfilehost.com/?fid=4349826312261708285
Viper patch
https://androidfilehost.com/?fid=4349826312261708283
Credits to Munchy
Just subscribe to he's channel on YouTube
Click to expand...
Click to collapse
thank you very much for this great job.. you are the best, man ???
tatuboy said:
I am here to share the patch Viper4Android on MIUI11 BASE ON ANDROID 10.
IT'S WORKING FOR ME
PRE REQUISITE
TWRP AND ROOTED also magisk is installed.
1. INSTALL SELINUX And set it to permisive, set the app on autosatart, and reboot your device
2. Install VIPER4ANDROID APK
grant root access with ask to install driver click install then reboot device.
"You will get bootloop after you install the driver just go to recovery mode by pressing volume up and power down
3. Flash Viper4Android patch on TWRP and reboot. And Viola you have now Viper4Android perfectly installed.
Selinux
https://androidfilehost.com/?fid=4349826312261708284
Viper apk
https://androidfilehost.com/?fid=4349826312261708285
Viper patch
https://androidfilehost.com/?fid=4349826312261708283
Credits to Munchy
Just subscribe to he's channel on YouTube
Click to expand...
Click to collapse
This method works for poco f1 miui eu 11.0.4.0 Android 10.
Works well in my poco f1 miui.eu 11 Android Q , Magisk 20.3, No Gravity Custom Kernel :fingers-crossed:
I use with other mods (Dolby Atmos and ICE ICESound) in this link:
https://forum.xda-developers.com/redmi-note-7/how-to/dolby-digital-plus-viper4-miui-pie-rom-t3958080
hey, you seem like you know your way around the Viper mod, I saw your posts in other threads.
yesterday I followed instructions from the link you provided and got stuck in bootload screen after installing drivers. should I have flashed the patch which was given in the OP of this thread?
What about SELinux, I'm not sure what it is, do I need to apply it? if yes, how to in this case? I have the same configuration as you, MIUI 11 FOR POCO from Xiaomi.eu +Magisk 20.3 + No Gravity Kernel
thank you in advance
If anyone else knows the answers, please share, I'd appreciate it
also, is there any place where I can find information on what is the difference between Viper 4Anroid + DDP and Airun/Sauron mod? I'm totally lost
krzylew said:
hey, you seem like you know your way around the Viper mod, I saw your posts in other threads.
yesterday I followed instructions from the link you provided and got stuck in bootload screen after installing drivers. should I have flashed the patch which was given in the OP of this thread?
What about SELinux, I'm not sure what it is, do I need to apply it? if yes, how to in this case? I have the same configuration as you, MIUI 11 FOR POCO from Xiaomi.eu +Magisk 20.3 + No Gravity Kernel
thank you in advance
If anyone else knows the answers, please share, I'd appreciate it
Click to expand...
Click to collapse
Easy, selinux changer is used to change from enforcing to permissive mode so viper can run as per normal. You need to set it as auto start for this app.
Now that you stuck in bootloop is because you haven't used twrp to install the patch. Once install, it should boot into screen.
Hey, thank you!!! Managed to install everyting and seems to work
Just one quick question, when I exit the Dolby app, there is a notification saying "Remote service has stopped" - is this the way it's supposed to be?
krzylew said:
Hey, thank you!!! Managed to install everyting and seems to work
Just one quick question, when I exit the Dolby app, there is a notification saying "Remote service has stopped" - is this the way it's supposed to be?
Click to expand...
Click to collapse
No idea on Dolby app. I'm using poco too with miui Eu Android 10 rom. Bet this is not dolby atmos app.
Have you tried to reinstall it? Or maybe try audio modification library module?
thomas140 said:
No idea on Dolby app. I'm using poco too with miui Eu Android 10 rom. Bet this is not dolby atmos app.
Have you tried to reinstall it? Or maybe try audio modification library module?
Click to expand...
Click to collapse
I think that occasional reboots during phone configuration solved the problem. Thank you for your input.
[/QUOTE][/QUOTE][/QUOTE]Does it work for pixel based evo X roms and
---------- Post added at 09:13 PM ---------- Previous post was at 09:05 PM ----------
Johnjamess said:
Does it work for pixel based evo X roms and
Click to expand...
Click to collapse
Tested it out on evo x latest build works perfect!
Hello,
I have problem with installing ViPER4Android on my Xiaomi Mi Mix 2S (xiaomi.eu, android P, miui 11).
I've installed Magisk 20.3 and Magisk Manager 7.5.1.
Then I wanted to install this addon.
I was trying to do this with instructions on this forum, because I knew that there's problem with compatibility on android 10.
Everything was going properly to the moment of restarting phone after installation.
The phone got into bootloop.
I've tried to do this many times with little modifications of actions, but it hasn't ever worked.
If anyone had the same issue and have some solution for that, please help me. I can't leave without viper
The only help for the phone to start is removing viper's files in TWRP File Manager. Then phone starts normally.
Thanks a lot for every answer <3
nitroseq said:
Hello,
I have problem with installing ViPER4Android on my Xiaomi Mi Mix 2S (xiaomi.eu, android P, miui 11).
I've installed Magisk 20.3 and Magisk Manager 7.5.1.
Then I wanted to install this addon.
I was trying to do this with instructions on this forum, because I knew that there's problem with compatibility on android 10.
Everything was going properly to the moment of restarting phone after installation.
The phone got into bootloop.
I've tried to do this many times with little modifications of actions, but it hasn't ever worked.
If anyone had the same issue and have some solution for that, please help me. I can't leave without viper
The only help for the phone to start is removing viper's files in TWRP File Manager. Then phone starts normally.
Thanks a lot for every answer <3
Click to expand...
Click to collapse
didnt help but same problem here ... also tried many things but nothing works ...
I confirm same issues.
Additionally I can't install magisk also.
Have you made a clean flash of miui 11? I've updated from miui 10.
Sent from my MIX 2S using Tapatalk
rimsilva said:
I confirm same issues.
Additionally I can't install magisk also.
Have you made a clean flash of miui 11? I've updated from miui 10.
Sent from my MIX 2S using Tapatalk
Click to expand...
Click to collapse
Why can't you install magisk? What type of problem do you have?
I've made a clean flash of miui 11, because of changing the ROM, so I had to do that. What ROM do you have?
Now I have the other idea. In this week I will try to change the ROM to any other and try to install Viper again. Maybe it's the problem...
I'm using stable xiaomi.eu miui and have upgraded by OTA.
With more time I will format system and install magisk 20.3 using twrp, at the moment if I flash magisk the status is always "Magic not installed".
Sent from my MIX 2S using Tapatalk
I have maybe a solution
I'm using weekly realease of xiaomi.eu and i sucess to resolve the problem,i don't now if that work for you but for magisk, have you try to install the last version or do a clean flash ? and for viper there are a thread on xda who talk about this problem and how resolve it.
---------- Post added at 05:01 PM ---------- Previous post was at 04:59 PM ----------
I flashed v4afx-rootless_08.18.2019.zip via TWRP and found in folder viper4android v4a.apk. Install, load driver, reboot, works well
anyone fix this ?
Removing some sh files in magisk folder and permissive selinux is the key
had already tried this ... not working ...
HD_Lutze said:
had already tried this ... not working ...
Click to expand...
Click to collapse
Have you tried installing viper magisk then launch viper app, you might have to manually give it storage access for it to launch so make sure it has storage access, grant it root access then install the drivers and reboot. It works for me
Edit: forgot to mention you need the magisk mod called audio modification library before you install viper drivers