hi , as u can tell by the tittle , i just flashed Paranoid Andrid 7.2.3 which does not support F2fs. i realize it in the middle of flashing that my phone is on F2fs format not ext4 , now its stuck on oneplus logo , but i can still boot into TWRP. and when i open file manager on TWRP , there's nothing in there , tried to use my laptop too , yet still nothing there. any chance i recover my data plz or fix my phone ? thxx
Try the "fsck.f2fs" command from TWRP's terminal, with the -a and/or -f arguments. I've never needed to use it, but it's worth a try.
thx for ur reply . any chance of my data will be back ? *bad englsh
No idea. But it can't hurt to try.
As for the device (partition) names, for our device:
/dev/block/mmcblk0p16 (cache)
/dev/block/mmcblk0p14 (system)
/dev/block/mmcblk0p28 (data)
Make sure to unmount these partitions before you run any commands on them.
Let me know how it goes for you.
but how about the internal ?
update : tried to use fsck.f2fs but it says Error : Device not specified
Azhar_Fahry said:
but how about the internal ?
Click to expand...
Click to collapse
Internal data is a subdirectory of /data. So by targeting the data partition, you are also implicity targeting your personal data as well.
Sent from my A0001 using Tapatalk
---------- Post added at 07:20 AM ---------- Previous post was at 07:18 AM ----------
Azhar_Fahry said:
but how about the internal ?
update : tried to use fsck.f2fs but it says Error : Device not specified
Click to expand...
Click to collapse
Specify the data partition as mentioned above.
Sent from my A0001 using Tapatalk
yep , done , it fix my phone , but i think i still lost all the files
Azhar_Fahry said:
yep , done , it fix my phone , but i think i still lost all the files
Click to expand...
Click to collapse
Darn. Sorry to hear that.
Maybe someone else here has more information.
Sent from my A0001 using Tapatalk
aight thx so much for ur help btw at least i studied from my own mistake
Related
hi guys,,
i have this problem with my milestone everytime i restore from nandriod backup..
the baseband is resorting to unknown as well as the imei,
i read the net about backing up the efs..
the problem is the instruction i got is seemed to be for samsung..
m having trouble backing it up..
is there any thread here that i can read to back up my efs..
and u if ur knowledgeable abbout this scenario..
can u please educate me on how to do this..
it would be greatly appreated..
pleas
As far as I know, there is no need to make a backup of EFS; since it doesn't exists in Milestone.
true, efs partition does not exist on milestone. I belive the exact same data on milestone is on the pds. http://forum.xda-developers.com/showthread.php?t=1558483 thread contains info if you wish to backup pds.
---------- Post added at 01:26 PM ---------- Previous post was at 01:18 PM ----------
deathnote013 said:
hi guys,,
i have this problem with my milestone everytime i restore from nandriod backup..
the baseband is resorting to unknown as well as the imei,
i read the net about backing up the efs..
the problem is the instruction i got is seemed to be for samsung..
m having trouble backing it up..
is there any thread here that i can read to back up my efs..
and u if ur knowledgeable abbout this scenario..
can u please educate me on how to do this..
it would be greatly appreated..
pleas
Click to expand...
Click to collapse
Search for some flashable radios for milestone. You flash them through OpenRecovery. Btw, there are radios already included in OpenRecovery.
And this post is really not for develeopment section. General would be proper place for it. There is no moderator for this forum and kabaldan is the only dev left but still...
thanks dude..
i tried flashing the radios as well using OR but still imei is unknown as well as the baseband..
i read the thread and tried to back up the pds using
tar -cf /sdcard/pds.tar pds
but it says that there is no such file... how can i back it up using console in OP and if i was able to back it up.. how can i restore it when i restored from nandriod
m running eclair right now.. 2.1
deathnote013 said:
thanks dude..
i tried flashing the radios as well using OR but still imei is unknown as well as the baseband..
i read the thread and tried to back up the pds using
tar -cf /sdcard/pds.tar pds
but it says that there is no such file... how can i back it up using console in OP and if i was able to back it up.. how can i restore it when i restored from nandriod
m running eclair right now.. 2.1
Click to expand...
Click to collapse
to access /pds on OpenRecovery console you must first manually mount the partition.
mkdir /pds
mount /dev/block/mtdblock5 /pds
I cant remember the correct mtdblock, but you can cat /proc/mtd | grep pds
Then you can backup
tar -cf /sdcard/pds.tar /pds
drmedarius said:
to access /pds on OpenRecovery console you must first manually mount the partition.
mkdir /pds
mount /dev/block/mtdblock5 /pds
I cant remember the correct mtdblock, but you can cat /proc/mtd | grep pds
Then you can backup
tar -cf /sdcard/pds.tar /pds
Click to expand...
Click to collapse
thanks dude... very helpful..
and how can i restore it using OR??
CM V2.5 UPDATE Renamed to LineageOS 13 v2.5
** very important :- IF YOU HAVE TWRP PLEASE BACKUP EVERY PARTITION ESPECIALLY NVRAM BEFORE PROCEEDING, NVRAM PARTITION STORES IMEI INFO. SO YOU CAN RESTORE IT BACK IF NEEDED **
(Procedure given in post #2)
Good News for lenovo k4 note users. Cyanogenmod 13 is available for our phone(tested by me on 3gb/16gb variant a7010a48) .(fingerprint working)
This time again Russians did it(earlier cm12) .
Thanks to zormax
Thread link
In Russian>> http://lenovo-forums.ru/topic/21062-lenovo-a7010-cm130-android-60-custom-rom/
In English(translated by google)>> https://translate.googleusercontent...m-rom/&usg=ALkJrhiasjo964A65f9ToPkUjygksKjwHg
File direct links
LineageOS 13 flash file(ver 2.5)>> https://yadi.sk/d/aU9A0Z9j3F3ACF
Mirror>>
http://goo.gl/Z6xaww
Gapps>> https://yadi.sk/d/nmaQ6XKdsq6Ng
Mirror>> http://goo.gl/0f5wDh
Aroma FM>> https://yadi.sk/d/wB9tERFsvG5Nu
Mirror>> http://goo.gl/pKRXQk
Addon File>> https://yadi.sk/d/nmaQ6XKdsq6Ng
Mirror>> http://goo.gl/A5Pz4I
*All the links are to original sources
Please do it at your own risk
Problems-
No step counter
NFC not working
Flashing procedure given there in English translation
Hit Thanks if helped
Steps to be followed-
1)Copied and extracted all files in a folder in ext. Memory card.
2)Reboot into recovery
3)wipe system,data,dalvik cache,cache
4)click install in twrp and select install image.
Now install image boot.img to boot & system.img to system partition separately
5)flash gapps zip file
6)flash supersu zip file
7)wipe dalvik cache and reboot
Thats all i followed.
I didn't deleted any nvdata but wiped internal sdcard.
Reserved #1
Great!! Good Job. Its work on 2gb/32gb Variant?
dighas said:
Great!! Good Job. Its work on 2gb/32gb Variant?
Click to expand...
Click to collapse
May be.
Just check it there.
Sorry bro no confirmation for this as i don't have this variant.
gursewak.10 said:
May be.
Just check it there.
Sorry bro no confirmation for this as i don't have this variant.
Click to expand...
Click to collapse
Beo how to installed rom???
Nik001 said:
Beo how to installed rom???
Click to expand...
Click to collapse
Procedure is given there check it in English translation
gursewak.10 said:
Procedure is given there check it in English translation
Click to expand...
Click to collapse
I flashed it..btw its awesome
---------- Post added at 07:26 AM ---------- Previous post was at 07:03 AM ----------
gursewak.10 said:
Procedure is given there check it in English translation
Click to expand...
Click to collapse
Bro i am facing one problem when i rebooted the devices it became blank not even charging i have to again flash stock rom...any solutiin
---------- Post added at 07:28 AM ---------- Previous post was at 07:26 AM ----------
gursewak.10 said:
Procedure is given there check it in English translation
Click to expand...
Click to collapse
I have flash image of boot2sd and system not boot.img.bcoz i installation process if we used usb otg pendrive to flash then onlyvwe havevto flash boot.img insteaf of boot2sd.img......right?
gursewak.10 said:
Procedure is given there check it in English translation
Click to expand...
Click to collapse
I am back to stock rom bcoz of I am facing one issues that when restart the phone its off not turn on not charging at all...so flash stock rom and second time I flash the ROM again same issues facing.. I don't why it is happening?? Can u help me?
Nik001 said:
I am back to stock rom bcoz of I am facing one issues that when restart the phone its off not turn on not charging at all...so flash stock rom and second time I flash the ROM again same issues facing.. I don't why it is happening?? Can u help me?
Click to expand...
Click to collapse
I flashed boot.img from external memory card.
You need to have s219 update installed+ twrp
gursewak.10 said:
I flashed boot.img from external memory card.
You need to have s219 update installed+ twrp
Click to expand...
Click to collapse
I am on s219 n twrp installed....let me tell your process that u installed rom...
---------- Post added at 08:50 AM ---------- Previous post was at 08:48 AM ----------
gursewak.10 said:
I flashed boot.img from external memory card.
You need to have s219 update installed+ twrp
Click to expand...
Click to collapse
And what about nvdata delete...I have enter into nvdata and delete all files n folder that r present in nvdata deleted.thats OK or I have done a mistakes???
Somebody please check and tell if VoLTE works on this rom.
wisewords said:
Somebody please check and tell if VoLTE works on this rom.
Click to expand...
Click to collapse
No bro not working
Nik001 said:
No bro not working
Click to expand...
Click to collapse
Thats what I want because I can't use 4G otherwise.
gursewak.10 said:
Steps followed by me(can't guarantee for you)-
1)Copied and extracted all files in a folder in ext. Memory card.
2)Reboot into recovery
3)wipe system,data,dalvik cache,cache
4)install image boot.img to boot & system.img to system
5)flash gapps zip file
6)flash supersu zip file
7)wipe dalvik cache and reboot
Thats all i followed.
I didn't deleted any nvdata but wiped internal sdcard.
Click to expand...
Click to collapse
Thanks a lots bro its worked for me also...
Wonderfull Job
Thank you for your job. I installed in Vibe a7010. Can you put pt-br language in next update?
karisk said:
Thank you for your job. I installed in Vibe a7010. Can you put pt-br language in next update?
Click to expand...
Click to collapse
Sorry this work is not by me. I just shared it. Original thread link is given in first post. Moreover the chances for it are less as author is a Russian and he stated it too .
bluetooth audio doesnt work for me same with the cm12 version all else good fingerprint workin, black sod when i reformatted the sdcard good for a daily driver still waiting for darkblood's build from source
ans also corrupted sdcard notification on boot up just clear all the notifcations ur sdcard still accesibble just dont format wipe it once u already installed some apps since it writes some of the data on sdcard partition
edit 3
renstalled. reflashed rewiped everything corrupted sdcard no more
havent tried bluetooth audio else working fine
edit 4
bluetooth audio not workin
zxhian said:
bluetooth audio doesnt work for me same with the cm12 version all else good fingerprint workin, black sod when i reformatted the sdcard good for a daily driver still waiting for darkblood's build from source
ans also corrupted sdcard notification on boot up just clear all the notifcations ur sdcard still accesibble just dont format wipe it once u already installed some apps since it writes some of the data on sdcard partition
Click to expand...
Click to collapse
Bro this [email protected] method in 2nd post for proper installation of cm13..its working awesome.
How's this ROM working? Please provide reviews if someone has installed it, and screenshots too.
Sent from my Lenovo A7010a48 using XDA-Developers mobile app
Hi, you can see my question.
I've try wipe, but only data works. And no change.
I've try to réinstall the custom rom, you can see result.
Ttry to flash stock rom with odin, odin failed.
and try to réinitialise with smart switch ( he say me i havent tow slot for sim, i know). And ... nothing change.
The device has been already root, and i've already change for this custom rom with no problem.
Thanks for your help.
Edit: with format data after wipe data and after reboot on twrp, no red line, i've install the rom. good : i've the rom, bad : the problem is come back.
Just for to be sur, this screenshoot is just a example. Other installation make me the same error.
This rom work really good and other people haven't any problems.
Send me the kernel and I disable /data ecncrypting for you
DThrawn said:
Hi, you can see my question.
I've try wipe, but only data works. And no change.
I've try to réinstall the custom rom, you can see result.
Ttry to flash stock rom with odin, odin failed.
and try to réinitialise with smart switch ( he say me i havent tow slot for sim, i know). And ... nothing change.
The device has been already root, and i've already change for this custom rom with no problem.
Thanks for your help.
Edit: with format data after wipe data and after reboot on twrp, no red line, i've install the rom. good : i've the rom, bad : the problem is come back.
Click to expand...
Click to collapse
do't worry it is normal i explain you
when you format with twr the data is readable
and the first time starting system Samsung encrypt the file so txr can't mount again data
but don't care about it
DThrawn said:
Edit: with format data after wipe data and after reboot on twrp, no red line, i've install the rom. good : i've the rom, bad : the problem is come back.
Click to expand...
Click to collapse
It's all because kernel has encrypted /data and data encrypts after a reboot. Some changes in the kernel solve your problem. Data will mount always after some changes in the kernel
maxx35000 said:
do't worry it is normal i explain you
when you format with twr the data is readable
and the first time starting system Samsung encrypt the file so txr can't mount again data
but don't care about it
Click to expand...
Click to collapse
Forgetten said:
It's all because kernel has encrypted /data and data encrypts after a reboot. Some changes in the kernel solve your problem. Data will mount always after some changes in the kernel
Click to expand...
Click to collapse
Ok, I understand more why it's all my recovery is down. my device work good also with what you said i'm more quiet.
But why reinitialisation with switch, let the same problem. The kernel is not reinitialised to ?
I've try to modify selinux permissions before to install a sound mod and create an folder init.d. Is it possible the problem stay cause that?
DThrawn said:
Ok, I understand more why it's all my recovery is down. my device work good also with what you said i'm more quiet.
But why reinitialisation with switch, let the same problem. The kernel is not reinitialised to ?
I've try to modify selinux permissions before to install a sound mod and create an folder init.d. Is it possible the problem stay cause that?
Click to expand...
Click to collapse
I don't sure about that but you should mount your /data using patched kernel. Send it to pm and I patch them to mount data fully
Forgetten said:
I don't sure about that but you should mount your /data using patched kernel. Send it to pm and I patch them to mount data fully
Click to expand...
Click to collapse
I'm a old beginner, I don't know where is the kernel and I don't know if it's sur to give mine cause i don't know what information of my device is in.
I appreciate your help but i can't give anything what a I don't know.
DThrawn said:
I'm a old beginner, I don't know where is the kernel and I don't know if it's sur to give mine cause i don't know what information of my device is in.
I appreciate your help but i can't give anything what a I don't know.
Click to expand...
Click to collapse
OK. Say. Which ROM do you use?
Forgetten said:
OK. Say. Which ROM do you use?
Click to expand...
Click to collapse
I use the evo-grace V1.2 J7 2016, but I ve never had problem before trying install sound mod with modification of selinux permission.
Unmount data always but not important, but some install, wipe or backup impossible it's new.
Flash before formatting data.
https://www.androidfilehost.com/?fid=24591000424951049
ashyx said:
Flash before formatting data.
https://www.androidfilehost.com/?fid=24591000424951049
Click to expand...
Click to collapse
Thanks, work realy fine. no red line at all.
Also i lose root and the problem come back when i try to reinstall the rom evo-grace, cause she's rooted and she has its own no encrypted file, i think.
DThrawn said:
Thanks, work realy fine. no red line at all.
Also i lose root and the problem come back when i try to reinstall the rom evo-grace, cause she's rooted and she has its own no encrypted file, i think.
Click to expand...
Click to collapse
When you flash anything that modifies or replaces the boot partition you need to reflash the patch afterwards or the data partition will be re-encrypted.
ashyx said:
When you flash anything that modifies or replaces the boot partition you need to reflash the patch afterwards or the data partition will re-encrypted.
Click to expand...
Click to collapse
Yes, i've can make some backup and install like that. It's help me. And now i've install permanetly the rom of max35000, , he have make some good modification. Problem solved with help of you to.
Thanks for have take a time for look that.
Forgetten said:
Send me the kernel and I disable /data ecncrypting for you
Click to expand...
Click to collapse
Hi my bro
Please help me
How can i make disablr / data ecncrypting ??
I have j710f frp on with pattern
Can i open it without losing data ??
---------- Post added at 10:09 PM ---------- Previous post was at 10:00 PM ----------
How can i make a kenel to disable data ecncrypting ??
Hi, I am using Samsung Galaxy Core GT-I8262. My phone is rooted and busybox installed. I have TWRPP 3.0.2 installed. Whenever I tried to install custom rom or format system partition, after few seconds it is automatically reboots into recovery. Then shows (in log): Unble to mount "/system", Unble to mount "/cache", Unble to mount "/data" and so on. Can anyone help me?
MerajBD said:
Hi, I am using Samsung Galaxy Core GT-I8262. My phone is rooted and busybox installed. I have TWRPP 3.0.2 installed. Whenever I tried to install custom rom or format system partition, after few seconds it is automatically reboots into recovery. Then shows (in log): Unble to mount "/system", Unble to mount "/cache", Unble to mount "/data" and so on. Can anyone help me?
Click to expand...
Click to collapse
Hey bro , also experince that problem .use twrp 2.7... .
That twrp working good but can't install rom for me ,(i think that's my phone problem.).
:good:
Check Here
MerajBD said:
Hi, I am using Samsung Galaxy Core GT-I8262. My phone is rooted and busybox installed. I have TWRPP 3.0.2 installed. Whenever I tried to install custom rom or format system partition, after few seconds it is automatically reboots into recovery. Then shows (in log): Unble to mount "/system", Unble to mount "/cache", Unble to mount "/data" and so on. Can anyone help me?
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-core/general/video-fix-unable-to-mount-installing-rom-t3573831
CHECK here bRO
---------- Post added at 03:14 AM ---------- Previous post was at 03:14 AM ----------
Sheref said:
Hey bro , also experince that problem .use twrp 2.7... .
That twrp working good but can't install rom for me ,(i think that's my phone problem.).
:good:
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-core/general/video-fix-unable-to-mount-installing-rom-t3573831
CHECK HERE
Sheref said:
Hey bro , also experince that problem .use twrp 2.7... .
That twrp working good but can't install rom for me ,(i think that's my phone problem.).
:good:
Click to expand...
Click to collapse
No bro. It's not only you who have this prroblem. I am also able to do everything except rom installing using twrp 2.7.
Gautam Maini said:
https://forum.xda-developers.com/galaxy-core/general/video-fix-unable-to-mount-installing-rom-t3573831
CHECK here bRO
---------- Post added at 03:14 AM ---------- Previous post was at 03:14 AM ----------
https://forum.xda-developers.com/galaxy-core/general/video-fix-unable-to-mount-installing-rom-t3573831
CHECK HERE
Click to expand...
Click to collapse
Thanks for your reply. But your method didn't worked. I have tried it. After reboot into recovery it is still can not mount "/system" partition. No problem with other partitions. It will be helpful if you can provide any methods that can convert the ROM as odin flashable ROM. :good:
MerajBD said:
Thanks for your reply. But your method didn't worked. I have tried it. After reboot into recovery it is still can not mount "/system" partition. No problem with other partitions. It will be helpful if you can provide any methods that can convert the ROM as odin flashable ROM. :good:
Click to expand...
Click to collapse
Bro you have pc ??. I will give you the steos to convert rom into odin flashable. You can install any rom with that steps except Baidu cloud os . im installing roms by that method.:good:
Sheref said:
Bro you have pc ??. I will give you the steos to convert rom into odin flashable. You can install any rom with that steps except Baidu cloud os . im installing roms by that method.:good:
Click to expand...
Click to collapse
Yes bro! I have PC. Please tell me.
MerajBD said:
Yes bro! I have PC. Please tell me.
Click to expand...
Click to collapse
Download the Assated kitchen rom editor from the link.
https://forum.xda-developers.com/ch...d-roms-editor-assayyedkitchen-t3410545/page46
Setup the tool and start a new project by pressing 1 .
And press 7 to build the rom for flashing. Select tar method then Follow the instruction by the app.
You will get the rom from ready folder in the directory.
Sry for my bad english.
If you have facing any problems just post here.
Press :good: if i helped ......:good:
33
---------- Post added at 07:45 AM ---------- Previous post was at 07:41 AM ----------
1pkw
MerajBD said:
Hi, I am using Samsung Galaxy Core GT-I8262. My phone is rooted and busybox installed. I have TWRPP 3.0.2 installed. Whenever I tried to install custom rom or format system partition, after few seconds it is automatically reboots into recovery. Then shows (in log): Unble to mount "/system", Unble to mount "/cache", Unble to mount "/data" and so on. Can anyone help me?
Click to expand...
Click to collapse
Haha hahahaha
Firstly format data in ex3 haha then sys format in ext3 then cache ext3
Reboot and flash what u like
MerajBD said:
No bro. It's not only you who have this prroblem. I am also able to do everything except rom installing using twrp 2.7.
Click to expand...
Click to collapse
Mine is TWRP 2.7.1.0 by NovaFusion and everything worked fine . Be sure to install the latest version and install it via Odin.
Here's the link in case you need 'em
novafusion.pl/downloads/
UnexpectedGuy said:
Mine is TWRP 2.7.1.0 by NovaFusion and everything worked fine . Be sure to install the latest version and install it via Odin.
Here's the link in case you need 'em
novafusion.pl/downloads/
Click to expand...
Click to collapse
Thanks! Everything is working fine with this twrp.
MerajBD said:
Thanks! Everything is working fine with this twrp.
Click to expand...
Click to collapse
Enjoy
Hi everyone. I have a problem that would be the call volume too low! what with the miui 9 I didn't have. now I have the global 10.4.2 .. thanks
Peppone990 said:
Hi everyone. I have a problem that would be the call volume too low! what with the miui 9 I didn't have. now I have the global 10.4.2 .. thanks
Click to expand...
Click to collapse
Easy to fix, problem very good know by me.
Boot to twrp, mount all partitions, flash zip from attachment. Solved
Give a thanks ??
dromaczek said:
Easy to fix, problem very good know by me.
Boot to twrp, mount all partitions, flash zip from attachment. Solved
Give a thanks ??
Click to expand...
Click to collapse
is this attachment works with Pixel Experience (Android 10)?
amit1971 said:
is this attachment works with Pixel Experience (Android 10)?
Click to expand...
Click to collapse
Yes, it should work.
But dont forget on TWRP mount vendor partition first (before flash!!) (this zip dont check is correctly mounted, if not mount it doesnt do anything)
dromaczek said:
Yes, it should work.
But dont forget on TWRP mount vendor partition first (before flash!!) (this zip dont check is correctly mounted, if not mount it doesnt do anything)
Click to expand...
Click to collapse
I had to flash SAR-TWRP for Pixel Experience Android 10.
Do i need to flash Official TWRP for this? That attachment doesn't work with SAR-TWRP.
amit1971 said:
I had to flash SAR-TWRP for Pixel Experience Android 10.
Do i need to flash Official TWRP for this? That attachment doesn't work with SAR-TWRP.
Click to expand...
Click to collapse
Then i dont know, i use this patch on xiaomi EU and pixel experience official (not 10), works perfectly.. try... if doesn work, fix script -> maybe mount poin of vendor partition is other, and dont install
dromaczek, do you have patch revert zip?
dromaczek said:
Easy to fix, problem very good know by me.
Boot to twrp, mount all partitions, flash zip from attachment. Solved
Give a thanks ??
Click to expand...
Click to collapse
Thank you for your effort dromaczek!
Can you please tell me if i need to mount
-Cache
-Data
-System
-Vendor
-Usb-OTG
-and click on Mount system partition read only
for this to work?
Thank you
inglar2k said:
dromaczek, do you have patch revert zip?
Click to expand...
Click to collapse
No, i dont have, make backup vendor partition
---------- Post added at 10:03 AM ---------- Previous post was at 10:02 AM ----------
TATA_MATA said:
Thank you for your effort dromaczek!
Can you please tell me if i need to mount
-Cache
-Data
-System
-Vendor
-Usb-OTG
-and click on Mount system partition read only
for this to work?
Thank you
Click to expand...
Click to collapse
hmm, i think only ventor mount should you have...
dromaczek said:
No, i dont have, make backup vendor partition
---------- Post added at 10:03 AM ---------- Previous post was at 10:02 AM ----------
hmm, i think only ventor mount should you have...
Click to expand...
Click to collapse
I am sorry, I didnt understand. You believe that I only need to mount Vendor and nothing else? Thank you