I can't turn screen of my S6 on. But the phone is still working. It can enter download mode, boot fine, charging well....Just only screen, finger scanner and can not boot into recovery mode. I connected it to a PC. Recognized perfetly but i can not access to get my data because it wasn't unlock yet.
Please help me!
What happened with phone? Just one day display died and from that time doesn't work?
Related
My Moto Droid A855 has a dead screen, but I can see it on my desktop IF I can get USB Debugging mode enabled, in which its off at the moment.
My screen is DEAD, nothing can be seen, but the touch screen works. *I was able to unlock the phone*
I flashed stock 2.2 back onto my phone but now debugging mode is off, and my screen is dead, so I dont know how to re-enable it.
Does anyone know how to enable it without a screen?
come on! any replies ? my phone is dead too! i accidentally uninstalled launcherpro which replaced my LGHOME and now stuck at android booting screen with debugging mode off!
I was hoping there was a way to enable USB Debugging with a dead screen myself.....after a bad Rom flash I lost my touchscreen functionality.....Bad move when I Hard reset and found that I am stuck on the "Touch Android" screen to activate... with no conceivable way to "touch Android..."
You can use ADB while inside the recovery. Why are you trying to turn on debugging if I may ask?
Find someone with the same phone. Pull the battery on yours and reboot the other one. Power yours up. Now that both phones are on, navigate the good phone to where the setting is to debug. The same time you're doing that, do the same screen presses on the one with the bad screen. Only problem is you said you flashed stock back on. It's going to want to activate the phone and set up Gmail info. Good luck!
Dear all,
I recently got water damage on my OP7Pro. Now my screen doesn't work and the phone doesn't respond to touch. So I am left with a black screen that sometimes flickers so I can see the bare minimum.
The phone however does boot into the system and recovery and it vibrates when I slide the notification button up and down. When I plug it in my PC, it only shows the drivers and stuff.
Now I know I cant fix this phone, but I want to recover some important photo's.
Here is the real problem:
Since I have never adjusted the developer settings;
OTG allowance is disabled
USB debugging is disabled
So when using adb, it doesn't recognize my device.
When I boot into recovery I have to fill in a password.
Yet I DO know the password, I just don't know how to enter it.
I'm on the internet for 2 days now without succes.
Does anyone know how I can recover the data?
Any help would be highly appreciated.
Thanks!
Martijn
martijn10022 said:
Dear all,
I recently got water damage on my OP7Pro. Now my screen doesn't work and the phone doesn't respond to touch. So I am left with a black screen that sometimes flickers so I can see the bare minimum.
The phone however does boot into the system and recovery and it vibrates when I slide the notification button up and down. When I plug it in my PC, it only shows the drivers and stuff.
Now I know I cant fix this phone, but I want to recover some important photo's.
Here is the real problem:
Since I have never adjusted the developer settings;
OTG allowance is disabled
USB debugging is disabled
So when using adb, it doesn't recognize my device.
When I boot into recovery I have to fill in a password.
Yet I DO know the password, I just don't know how to enter it.
I'm on the internet for 2 days now without succes.
Does anyone know how I can recover the data?
Any help would be highly appreciated.
Thanks!
Martijn
Click to expand...
Click to collapse
If you never unlocked the bootloader or enabled add, you are stuck.
Hi all,
My wife owns a Mi 10 Lite 5G. This morning she was taken some photos to our children and suddenly the phone, apparently, shut down.
She left some time connected to the charger and tried to boot it again, but the only thing she got was a black screen that from time to time blinks and show the 5G logo for less than a second.
If I connect the mobile to the computer it cannot be connected to adb neither PCSuite. If I restart it to recovery or bootloader, it works as expected. The bootloader is locked, so I cannot access to a recovery with a shell, AFAIK.
If I launch the default Xiaomi recovery, the phone is only showed as "sideload" when I run "adb devices".
I'm not very worried about the phone because it is on warranty, but my wife is very upset about some photos that she was taken when the phone shut down, so most of them were not backup by Google Photos nor Xiaomi Cloud
Do you think that the photos can be recovered somehow without unlocking the bootloader?
Do you know if "sideloading" a ROM would erase the data storage (and then wipe the photos)?
Help and suggestions will be very appreciated.
Thank you in advance
After some more research, the mobile is able to boot up, but the screen blinks too fast that it is impossible to unlock the screen using the fingerprint or the unlock pattern.
I'm able to see, while blinking, the notification drawer, and if I connect the mobile to the PC, I'm able to see the new notification about being connected, but if I want to enter settings from the notification bar or open the USB connection mode menu tapping in the notification, I'm redirected to the pattern unlock screen and it is totally impossible to draw the pattern while blinking.
It feels like while the screen is off, the touchscreen and fingerprint reader don't work, so it is impossible to unlock the device right now.
Sadly I didn't activate the debug, so I'm not able to enter in the mobile using "adb" :-(
Any idea?
Lk2 said:
After some more research, the mobile is able to boot up, but the screen blinks too fast that it is impossible to unlock the screen using the fingerprint or the unlock pattern.
I'm able to see, while blinking, the notification drawer, and if I connect the mobile to the PC, I'm able to see the new notification about being connected, but if I want to enter settings from the notification bar or open the USB connection mode menu tapping in the notification, I'm redirected to the pattern unlock screen and it is totally impossible to draw the pattern while blinking.
It feels like while the screen is off, the touchscreen and fingerprint reader don't work, so it is impossible to unlock the device right now.
Sadly I didn't activate the debug, so I'm not able to enter in the mobile using "adb" :-(
Any idea?
Click to expand...
Click to collapse
Not sure what could've happened and Im not to literate on the topic, but are u still able to boot into FASTBOOT MODE?
nocturnosteve said:
Not sure what could've happened and Im not to literate on the topic, but are u still able to boot into FASTBOOT MODE?
Click to expand...
Click to collapse
I have the same problem, I can enter fastboot mode but my pc does not recognize the device
I have the same problem, I can enter fastboot mode but my pc does not recognize the device
So, first I thought my brother's A51 was water damaged because it was wet a little bit and charging was being interrupted. I left the phone turned off for the night and wanted to look at it again the next morning. The problem is that the screen or something else stopped working.
The screen works fine in Download mode, Recovery mode, or at splash screen with phone's model name, the problem begins when it's booting to Android. It's still stuck at the splash screen. no boot animation, no lock screen visible, just a model name. It's not bricked, because I can still unlock the phone (didn't have a password) and I can hear the unlock sound or charging sound (it started working again).
I tried factory reset through recovery - didn't help, flashing fresh firmware from Frija - didn't help. The only thing that changed is now the splash screen brightness goes down a bit and I noticed that until I am touching the screen so the phone can't lock itself it doesn't turn off the splash screen, but when I press the lock button it turns off the screen and I can't turn it back on, but the phone still works because I can hear charging sounds and it shows up in Device manager.
I also opened it because I wanted to see if there's any water damage, but I didn't see any water marks or burnt components. I cleaned the charging board with alcohol and let it dry but that didn't help.
I'm worried that there's something wrong with the motherboard or the charging board because it has a screen connector.
I can also see that some people here have similar issues:
Unbrick A51 - Stuck on samsung logo
Hi, My phone is stuck on A51 logo for days now it charges - I can enter download mode easily - I can sometimes enter recovery mode some other times it doesn't let me I tried flashing different stock ROMs of android 10, 11 for the phone with...
forum.xda-developers.com
black screen after splash and unable to factory reset, possibly frp?
Apologies for formatting, typing up on my phone during my break at work. To be more specific, I have a samsung a51 that recently had a black screen of death with no known cause. The samsung splash screen as well as the recovery menus alll work...
forum.xda-developers.com
I should also add that I don't have access to settings so I can't unlock OEM and flash custom recovery / ROM. I also cannot downgrade to Android 10 (duh)
I have exactly the same behaviour here.
I ordered a "defect" A51 on Ebay which was not working. I opened it an saw a water damage at the USB-C charging board. Since there was a lot of oxydated parts I ordered a replacement for this board.
After cleaning an replacing the charging board I have the same issue as szerbi. I see the charging screen (while powered off), I can enter download mode and transfering stock firmware using Odin, I can enter recovery mode. While all these states the display works well and I cannot see any damages like a broken display.
I even got it working correctly after several Odin firmware update and recovery mode / factory reset attempts and I could install some apps and set up my google account. I was very happy. But after some hours again: no screen while Android is running.
Now, when Android is running I hear the charging and the screen shot (pressing volume-down + power buttons) sounds and the phone will be visible as a storage device while connecting to a PC.
Conclusion: The display is black while Android is running. Since it was shortly active I assume either a loose contact on one of the flex cable connetions or a water damage at the displays flex board. Unfortunately latter cannot be checked without dividing the display from the display frame. I assume this is an irreversible process.
MY Sansumg A32 5G's screen broke after a fall. The display is just blank and the touch screen would not work.
I tried to restart the phone, but the android cannot finish boot up unless the phone is unlocked.
THe HDMI display through a MHL built-in adapter would not work unless the phone completes boot up.
I am only interested to get the data from it.
Any ideas on how to enter the pattern for it to complete the boot up?
Hi, the data from your phone is not lost yet. But you have to visit a phone repair shop where they will replace your screen and you can continue using your phone.
mallelasandeep said:
MY Sansumg A32 5G's screen broke after a fall. The display is just blank and the touch screen would not work.
I tried to restart the phone, but the android cannot finish boot up unless the phone is unlocked.
THe HDMI display through a MHL built-in adapter would not work unless the phone completes boot up.
I am only interested to get the data from it.
Any ideas on how to enter the pattern for it to complete the boot up?
Click to expand...
Click to collapse