Database Info

Looking for SM-G900P Stock Rooted Rom??

I want to reflash my phone back to like it was when it came out of the box, but not loose the rooted status or the sim unlock.
I am currently using it with MetroPCS.
I flashed a rom to it but it doesnt have private mode and I am getting a few errors.
Can someone please help me??

jrjorin said:
I want to reflash my phone back to like it was when it came out of the box, but not loose the rooted status or the sim unlock.
I am currently using it with MetroPCS.
I flashed a rom to it but it doesnt have private mode and I am getting a few errors.
Can someone please help me??
Click to expand...
Click to collapse
Might help to give pertinent information like...what rom you flashed already? What version your phone is currently running. Etc. You know...things needed to help you.

Kreatur3 said:
Might help to give pertinent information like...what rom you flashed already? What version your phone is currently running. Etc. You know...things needed to help you.
Click to expand...
Click to collapse
I used the rom that came with moar 7.1

go to phone settings, about phone and tell me what the baseband says (just the last 5 characters)

youdoofus said:
go to phone settings, about phone and tell me what the baseband says (just the last 5 characters)
Click to expand...
Click to collapse
3BOK4
Not sure if that is an 8 or a B

jrjorin said:
3BOK4
Not sure if that is an 8 or a B
Click to expand...
Click to collapse
Here is what I currently have.

jrjorin said:
Here is what I currently have.
Click to expand...
Click to collapse
best thing to do then is to flash this https://www.sammobile.com/firmwares/download/61697/G900PVPU3BOK4_G900PSPT3BOK4_SPR
then TWRP 3.0.2. after flashing twrp boot into recovery and select reboot and itll ask you to swipe right to enable root. Do that and youre stock and rooted with official firmware

youdoofus said:
best thing to do then is to flash this https://www.sammobile.com/firmwares/download/61697/G900PVPU3BOK4_G900PSPT3BOK4_SPR
then TWRP 3.0.2. after flashing twrp boot into recovery and select reboot and itll ask you to swipe right to enable root. Do that and youre stock and rooted with official firmware
Click to expand...
Click to collapse
Ok thanks for your help I will let you know how it goes.

So far so good . I am installing MAOR 7.1 now hope it works ok and doesnt lock it.

jrjorin said:
So far so good . I am installing MAOR 7.1 now hope it works ok and doesnt lock it.
Click to expand...
Click to collapse
if it hasnt relocked yet, flashing MOAR surely wont

youdoofus said:
if it hasnt relocked yet, flashing MOAR surely wont
Click to expand...
Click to collapse
Using it now and it didn't relock.
Thanks for your help.

youdoofus said:
if it hasnt relocked yet, flashing MOAR surely wont
Click to expand...
Click to collapse
It was working fine and Moar 7.1 messed it up

jrjorin said:
It was working fine and Moar 7.1 messed it up
Click to expand...
Click to collapse
messed what up? and in the MOAR threads, there is a specific order in which you have to flash the ROM zips. I ran that ROM for over a year. What issue are you running into?
---------- Post added at 03:33 PM ---------- Previous post was at 03:31 PM ----------
and where are you getting your MOAR zip from? TDunham and ROMPnit made that ROM for several devices

youdoofus said:
messed what up? and in the MOAR threads, there is a specific order in which you have to flash the ROM zips. I ran that ROM for over a year. What issue are you running into?
---------- Post added at 03:33 PM ---------- Previous post was at 03:31 PM ----------
and where are you getting your MOAR zip from? TDunham and ROMPnit made that ROM for several devices
Click to expand...
Click to collapse
It causes the private mode not to work and gives me the sae error.
I have used it before with no problems.
But it was an older version

jrjorin said:
It causes the private mode not to work and gives me the sae error.
I have used it before with no problems.
But it was an older version
Click to expand...
Click to collapse
i might be wrong, but if you want to use 7.1, dont you have to flash 7.0 first?
---------- Post added at 04:48 PM ---------- Previous post was at 04:45 PM ----------
Changelog v7.0 : 08.27.2015
CLICK TO SHOW CONTENT
Known Issues v7.1 :
SAE has stopped error on reboots. Shouldn't be an issue, just click through it.
Known Issues v7.0 :
Center clock does not hide on lockscreen
You tell us!
https://forum.xda-developers.com/sp...om-v5-0-mod-control-floating-windows-t3016692

[ROM][Stable] MIUI 10 xiaomi.eu links

10.0.7.0
https://sourceforge.net/projects/xi..._MIMix2S_V10.0.7.0.PDGCNFH_v10-9.zip/download
https://androidfilehost.com/?fid=11410963190603845043
10.0.3.0
https://sourceforge.net/projects/xi...IMix2S_V10.0.3.0.ODGCNFH_v10-8.0.zip/download
https://androidfilehost.com/?fid=1322778262904012307
New links will be posted here.

Camerado said:
https://sourceforge.net/projects/xi...IMix2S_V10.0.2.0.ODGCNFH_v10-8.0.zip/download
https://androidfilehost.com/?fid=1322778262903997685
Click to expand...
Click to collapse
Is this android pie or still oreo?

MacLaughlin said:
Is this android pie or still oreo?
Click to expand...
Click to collapse
8.0 oreo

Can we update trough updater ? Download and update by package ?
No root needed ?

Did someone installed this ?
---------- Post added at 03:11 AM ---------- Previous post was at 02:53 AM ----------
It says not allowed to upgrade to an unofficial package

DMart9406 said:
Did someone installed this ?
---------- Post added at 03:11 AM ---------- Previous post was at 02:53 AM ----------
It says not allowed to upgrade to an unofficial package
Click to expand...
Click to collapse
You can't update through system update or MiFlash, I tried to push it through sideload no dice, also tried to boot into twrp and install as a zip from there, same thing -- just bootloops. I wasted an hour on this; it also installs TWRP as recovery so I think that's why it might be stuck looping.

nerdrum said:
You can't update through system update or MiFlash, I tried to push it through sideload no dice, also tried to boot into twrp and install as a zip from there, same thing -- just bootloops. I wasted an hour on this; it also installs TWRP as recovery so I think that's why it might be stuck looping.
Click to expand...
Click to collapse
AFAIK Xiaomi.eu stop developing on 8.8.3 rom (Oreo) for Mix 2S
Now, they're testing android P....so it's strange that someone comes out with this new version...

nerdrum said:
You can't update through system update or MiFlash, I tried to push it through sideload no dice, also tried to boot into twrp and install as a zip from there, same thing -- just bootloops. I wasted an hour on this; it also installs TWRP as recovery so I think that's why it might be stuck looping.
Click to expand...
Click to collapse
Format data before install ROM package.

DungHD said:
Format data before install ROM package.
Click to expand...
Click to collapse
Yup, you're right.
Just format data and install this rom with TWRP and it's working.
However, it's strange the leap from 8.8.3 to a 10.0.2....

Makes no sense. There hasn´t been any update from Xiaomi for a while.
So what is this based on so that this could be a stable (8.0 !!!)?!
Format Data? I´ll ignore this "update"...I have better things to do than find out this new ROM may be nothing new.

Camerado said:
https://sourceforge.net/projects/xi...IMix2S_V10.0.2.0.ODGCNFH_v10-8.0.zip/download
https://androidfilehost.com/?fid=1322778262903997685
Click to expand...
Click to collapse
Thanks, mate, for sharing this.
Really cool the new wallpaper videos feature. :good::good:
---------- Post added at 02:18 PM ---------- Previous post was at 02:12 PM ----------
DJ-Tumor said:
Makes no sense. There hasn´t been any update from Xiaomi for a while.
So what is this based on so that this could be a stable (8.0 !!!)?!
Format Data? I´ll ignore this "update"...I have better things to do than find out this new ROM may be nothing new.
Click to expand...
Click to collapse
Well, the fact is that everything is working great, and as i said in the last post, the videos wallpapers are really cool...
Maybe this was the last 8.0 build by xiaomi.eu, and they haven't shared with the public...

I don´t want video wallpaper....it´s stupid!
This will eat battery like crazy.
My Miui 8.8.4 (Beta 10) is running fine too. So what?!
If you like it...then good for you...I like to know what I´m flashing.

It's the stable xiaomi.eu mi mix 2s miui 10 build. Before that, everything was beta build.

The problem is HDR features not working when I watching HDR video on YouTube and color dropped

Does this have gapps included?

Ascertion said:
Does this have gapps included?
Click to expand...
Click to collapse
Yep, of course.

fast and stable rom. thanks for sharing.

Is data encryption working on this build? Thanks.

pedjamis said:
Is data encryption working on this build? Thanks.
Click to expand...
Click to collapse
Yes because its still android oreo

What I'm asking is has anyone tried to encypt data successfully? Settings - privacy - encryption - encrytp phone?
I'm asking this because I haven't found a xiaomi.eu rom that supports data encryption. Only system is encrypted.

[ROM][LG Aristo 2/2+/K8+] AR.Oreo.Rooted.v6

Special thanks:
@tecknight for supplying the rooted boot.img, a root method for the Aristo 2, and for fixing up my Custom Rom. A lot of the credit really should go to him, because without his help my effort would have been useless. So again thank you tecknight.
---------------------------------------------------------------------
LG Aristo 2
Rooted/Zip-Aligned/De-Bloated/De-Odexed
AR.Oreo v6
---------------------------------------------------------------------​
Disclaimer:
I am not responsible for any soft brick, hard bricked, or even broken devices after installing. Flash at your own risk.​
Prerequisites:
Unlocked Boot-loader
Unofficial TWRP Recovery
Unlocking Bootloader and Installing TWRP Here.
Features:
Removed Metro Apps​Removed LG Apps​Zip-Aligned System Apps​Rooted with Magisk 17.3 Beta​Trubuchet 15.1(Replacement for LG Home, Easy Home, and Home and Apps Launcher)​(More features coming soon.)​
Atomic Rom v6
- Before you install remember to make a backup of your data and system partitions.
- Let's Start!
Power Off your phone​Press and hold Pwr + VolD and release the power button when the phone vibrates, then just as fast press it again and hold.​After the factory reset confirm shows up select yes both times to boot into TWRP.​When done press back and navigate to the directory with the Rom and flash it.​Reboot the System and Done!​
Update 3.13.19:
Add the link to v6. Sorry guys I didn't realize I was being a poor thread manager.
Update 11.19.2018:
Fixed flash error from "messed up" meta-file in v1 and v2
v2 flash does error 6
The wrong boot.img causes the device to boot loop
SystemUI, LGIMS, and Video Calls keep crashing until the device soft reboots.
Update 11.20.2018:
Fixed updater-script
No more Boot loops.
Nothing crashes upon boot
Update 11.26.18
Rom is almost finished!
Added link to TeckNight's Pre-Rooted Rom
No longer will matter what device you have.
You can visit TeckNight's variant of the rom and how to install it here - https://forum.xda-developers.com/showpost.php?p=78218056&postcount=130
Enjoy and don't forget to leave thanks if you appreciate TeckNight's work and mine![/SIZE]
Thread Rules:
If any questions be sure to ask respectfully.
No cussing
No spamming
XDA:DevDB Information
ARom, ROM for the LG K8 (2018)
Contributors
NonStickAtom785, tecknight
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: cv1
Based On: Stock
Version Information
Status: Testing
Current Stable Version: 1.0
Stable Release Date: 2018-11-30
Current Beta Version: v1
Beta Release Date: 2018-11-30
Created 2018-11-26
Last Updated 2019-06-13

Reserved

RESERVED

Awesome thanks for adding Google camera and google messages the default lg messages and calling apps are hideous
---------- Post added at 10:23 PM ---------- Previous post was at 10:21 PM ----------
I wish I was smart like you developers so I could create a custom overclock kernel

Isaah E said:
Awesome thanks for adding Google camera and google messages the default lg messages and calling apps are hideous
---------- Post added at 10:23 PM ---------- Previous post was at 10:21 PM ----------
I wish I was smart like you developers so I could create a custom overclock kernel
Click to expand...
Click to collapse
It's not to hard. I just take in a lot that I read from other forums. I'm not as experienced as others but I've been learning on the way.
I can try to change the calling app, I did it once. Do you have any suggestions as to what app I should use to replace the call app? And would you like some more features to be added. I'm lacking on some idea's. I'm already looking at adding Substrantum, Audio FX, Eleven Music, and a CPU Controller. "Those will be in the next Update, along with a new boot animation."

Thank you for the work you've put in! I just wanted to report that I crash when I try to click Home Screen in the Settings under the display tab. Also, would it be possible for you to post the vendor files or what ever you used to compile the rom. That would be extremely helpful.

NonStickAtom785 said:
It's not to hard. I just take in a lot that I read from other forums. I'm not as experienced as others but I've been learning on the way.
I can try to change the calling app, I did it once. Do you have any suggestions as to what app I should use to replace the call app? And would you like some more features to be added. I'm lacking on some idea's. I'm already looking at adding Substrantum, Audio FX, Eleven Music, and a CPU Controller. "Those will be in the next Update, along with a new boot animation."
Click to expand...
Click to collapse
This XDA Forum has google phone v26 with dark mode support that would be a good phone app
https://forum.xda-developers.com/an...292-bubble-t3708218/post74588791#post74588791

jmanc3 said:
Thank you for the work you've put in! I just wanted to report that I crash when I try to click Home Screen in the Settings under the display tab. Also, would it be possible for you to post the vendor files or what ever you used to compile the rom. That would be extremely helpful.
Click to expand...
Click to collapse
I used the Stock rom to make this Rom. So essentially it's just a Custom Stock Rom with replaced Apps.

Isaah E said:
This XDA Forum has google phone v26 with dark mode support that would be a good phone app
https://forum.xda-developers.com/an...292-bubble-t3708218/post74588791#post74588791
Click to expand...
Click to collapse
Hey have you had any updates on the keep. I can pull it from the boot I'm for you if you'd like.
And also have you flashed the new update? I add a couple more things and removed some more. I'm stuck unless I can get some more suggestions from everyone.
Sent from my LGE LM-X210(G) using XDA Labs

NonStickAtom785 said:
Hey have you had any updates on the keep. I can pull it from the boot I'm for you if you'd like.
And also have you flashed the new update? I add a couple more things and removed some more. I'm stuck unless I can get some more suggestions from everyone.
Click to expand...
Click to collapse
Yea I flashed the new update but what do you mean by the keep

Isaah E said:
Yea I flashed the new update but what do you mean by the keep
Click to expand...
Click to collapse
I hate auto correct so much. I meant to say do you have any updates on the kernel. And lower down I meant to say do you still need the zimage.
I'm about to update the ROM again. It will boot faster and have better battery and charger speed.
Sent from my LGE LM-X210(G) using XDA Labs

I'm about to change the ROM's build.prop to fit the ROM. Can I get some volunteers to help me edit the settings app.

Thank you for this custom ROM and TWRP! I tested this (and still using as a daily driver) and can confirm working on the LG Phoenix 4 AT&T unlocked bootloader. With Magisk 18.0 I wouldn't recommend you update till a later version is released due to force close errors, but is rare with bash installed to /system. This ROM is very clean and I'm impressed and big thanks to the developer I've been looking for a way to root my Phoenix 4 and have a debloated rom
---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------
NonStickAtom785 said:
I'm about to change the ROM's build.prop to fit the ROM. Can I get some volunteers to help me edit the settings app.
Click to expand...
Click to collapse
I'm in!!! Wednesday I'll have my new PC so I can create a new settings app

AustinGarrick1818 said:
Thank you for this custom ROM and TWRP! I tested this (and still using as a daily driver) and can confirm working on the LG Phoenix 4 AT&T unlocked bootloader. With Magisk 18.0 I wouldn't recommend you update till a later version is released due to force close errors, but is rare with bash installed to /system. This ROM is very clean and I'm impressed and big thanks to the developer I've been looking for a way to root my Phoenix 4 and have a debloated rom
---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------
I'm in!!! Wednesday I'll have my new PC so I can create a new settings app
Click to expand...
Click to collapse
Awesome!!! I'm amazed that my ROM worked for the Phoenix 4. It was originally for the Aristo 2. What kind of firmware are you running? Also I'm about to release an Oreo Version of the ROM. Would you mind pre-testing it?

NonStickAtom785 said:
Awesome!!! I'm amazed that my ROM worked for the Phoenix 4. It was originally for the Aristo 2. What kind of firmware are you running? Also I'm about to release an Oreo Version of the ROM. Would you mind pre-testing it?
Click to expand...
Click to collapse
I would love to pre-test your rom! I'm on 7.1.2 as the Phoenix 4 was before this rom. No one has even found root or TWRP that works for this device yet so I feel good knowing this rom works
---------- Post added at 04:18 PM ---------- Previous post was at 04:17 PM ----------
NonStickAtom785 said:
Awesome!!! I'm amazed that my ROM worked for the Phoenix 4. It was originally for the Aristo 2. What kind of firmware are you running? Also I'm about to release an Oreo Version of the ROM. Would you mind pre-testing it?
Click to expand...
Click to collapse
Oh and TWRP too

AustinGarrick1818 said:
I would love to pre-test your rom! I'm on 7.1.2 as the Phoenix 4 was before this rom. No one has even found root or TWRP that works for this device yet so I feel good knowing this rom works
---------- Post added at 04:18 PM ---------- Previous post was at 04:17 PM ----------
Oh and TWRP too
Click to expand...
Click to collapse
I'd feel good to! Your the first one ever to root that phone. So if Aristo 2 firmware worked then the TWRP with the Oreo Kernel should work for you to. I'll post the link in a sec.

NonStickAtom785 said:
I'd feel good to! Your the first one ever to root that phone. So if Aristo 2 firmware worked then the TWRP with the Oreo Kernel should work for you to. I'll post the link in a sec.
Click to expand...
Click to collapse
Sounds good! I can't start a new thread or seem to figure it out so if your able to start one and mention me for finding the root method?

AustinGarrick1818 said:
Sounds good! I can't start a new thread or seem to figure it out so if your able to start one and mention me for finding the root method?
Click to expand...
Click to collapse
I forgot about that. Your a junior member so they wont let you post. But I make a more advanced ROOT method and post it for you and mention you.

NonStickAtom785 said:
I forgot about that. Your a junior member so they wont let you post. But I make a more advanced ROOT method and post it for you and mention you.
Click to expand...
Click to collapse
I would appreciate that so much!!! Thank you again!!

AustinGarrick1818 said:
I would appreciate that so much!!! Thank you again!!
Click to expand...
Click to collapse
Download this ROM. I havnt updated my links. But this is a little update. Not the Oreo Update.
https://androidfilehost.com/?fid=11410963190603874603

[SHARE][ROM][OFFICIAL]LineageOS 16.0

Official Nightly LineageOS Builds have started​​
Download From LineageOS Official
Credits :
highwaystar_ru mikeioannina

WOW. I'll try this one. Can't believe in f1f still got LOS 16.0. Just like a miracle.

How to fix WiFi?

Hello i want to try this but i hope someone gives me the link of old specific verion to be flash after project spectrum, i didnt expect to have official los in oppo f1f thats why i bring back to coloros and locked my device

Shotg1 said:
Hello i want to try this but i hope someone gives me the link of old specific verion to be flash after project spectrum, i didnt expect to have official los in oppo f1f thats why i bring back to coloros and locked my device
Click to expand...
Click to collapse
Try this, it works with no problem!
https://forum.xda-developers.com/oppo-f1/development/rom-twrp-flashable-project-spectrum-t3678445
---------- Post added at 07:58 AM ---------- Previous post was at 07:54 AM ----------
khannz7 said:
Official Nightly LineageOS Builds have started
Download From LineageOS Official
Credits :
highwaystar_ru mikeioannina
Click to expand...
Click to collapse
I had installed this new ROM (dirty flash over my existing LOS 16.0) and everything is going fine, but I am not sure the battery status also fix in this build or not?
It looks in same situation, please anyone shares your experience?
Thanks

Shotg1 said:
Hello i want to try this but i hope someone gives me the link of old specific verion to be flash after project spectrum, i didnt expect to have official los in oppo f1f thats why i bring back to coloros and locked my device
Click to expand...
Click to collapse
https://wiki.lineageos.org/devices/f1f/install

r30857 said:
I had installed this new ROM (dirty flash over my existing LOS 16.0) and everything is going fine, but I am not sure the battery status also fix in this build or not?
It looks in same situation, please anyone shares your experience?
Click to expand...
Click to collapse
I've been using it since the first official build and battery stats look better since I last tried in January.
One night, in airplane mode, I had around 50% disappearing for no reason. I haven't rooted or installed BetterBatteryStats yet, so couldn't relate this to a wavelock. After a reboot it was OK. This night, I only lost 1 or 2% in 10 hours, so it's OK for me.
On another subject, I cannot use manual network operator selection. No problem for my usage, but it was working before. I'll try to get a log and look into it as soon as I find the time.
I didn't test bluetooth yet.
Generally the experience is really fine. Only thing that bothers me is the camera quality and the ****ty beauty mode that destroys faces. It's like there's a ton of makeup :laugh:

kdd998 said:
I've been using it since the first official build and battery stats look better since I last tried in January.
One night, in airplane mode, I had around 50% disappearing for no reason. I haven't rooted or installed BetterBatteryStats yet, so couldn't relate this to a wavelock. After a reboot it was OK. This night, I only lost 1 or 2% in 10 hours, so it's OK for me.
On another subject, I cannot use manual network operator selection. No problem for my usage, but it was working before. I'll try to get a log and look into it as soon as I find the time.
I didn't test bluetooth yet.
Generally the experience is really fine. Only thing that bothers me is the camera quality and the ****ty beauty mode that destroys faces. It's like there's a ton of makeup :laugh:
Click to expand...
Click to collapse
Thanks bro.
I did clean flash the latest released this morning and tring to test the battery status again, and I found the charge speed is quite fast!
Unfortunately, the battery drop also fast!
Not sure it is releated to the battery itself,( probably it is up to the lifetime )or still caused by the firmware?
But it is ok to me and so great that we have official LOS 16.0!

Volta work or not

how can i fix error 7 when i install it ?

how i can root my oppo f1f whith android 9

Ahmed0Gad said:
how i can root my oppo f1f whith android 9
Click to expand...
Click to collapse
Download Magisk.zip and flash it under TWRP

r30857 said:
Download Magisk.zip and flash it under TWRP
Click to expand...
Click to collapse
I did it but without a result
Can you give me the Magisk.zip file
I might choose a wrong file
ِError : 1

Ahmed0Gad said:
I did it but without a result
Can you give me the Magisk.zip file
I might choose a wrong file
ِError : 1
Click to expand...
Click to collapse
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445/page5
You can download the latest Magisk from above link.
And what the version of your TWRP?

r30857 said:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445/page5
You can download the latest Magisk from above link.
And what the version of your TWRP?
Click to expand...
Click to collapse
Version twrp-3.2.3-20190321-f1f
i try to flash twrp-3.3.0-0-f1f
but not work

r30857 said:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445/page5
You can download the latest Magisk from above link.
And what the version of your TWRP?
Click to expand...
Click to collapse
thanks i root it when i update version

Ahmed0Gad said:
thanks i root it when i update version
Click to expand...
Click to collapse
Good!:good:

khannz7 said:
Official Nightly LineageOS Builds have started​​
Download From LineageOS Officialhttp://download.lineageos.org/f1f
Credits :
highwaystar_ru mikeioannina
Click to expand...
Click to collapse
Thanks for the great job!
But the battery indicator is still cheating shamelessly!

Can anyone help me to test the Instagram on this rom?
Because last Lineage rom cant view story and videos in Instagram.
The video and stories is just keep loading infinitely.

leonlee0116 said:
Can anyone help me to test the Instagram on this rom?
Because last Lineage rom cant view story and videos in Instagram.
The video and stories is just keep loading infinitely.
Click to expand...
Click to collapse
I've, tested everything working well,

Vendor image is not matching my system

I have a Moto G turbo (Merlin) and i installed Havoc OS in it. Everything works fine except the Camera and the proximity sensor. Whenever I open camera it crashes. I have installed many camera apps and tried it. In the sock rom it used to work fine. Also when I get a call I get a call my screen turns blank and I am not able to attend it.
I think there is some problem with the vendor image cause whenever I switch off my phone and turn it on again it gives an error "
The vendor image does not match system. Please flash the MPDS24.107-56-1-28 vendor image for you device"
Please tell me a way to fix this. I searched for the vendor image in my stock rom but i just found a .xml file that has a similar name. I don't know how to flash an xml file. It would be gr8 if anyone could please provide me with the vendor image for my phone and tell me how to flash it so that I could get this error fixd and take photos again!!

I've never had to flash an .xml image but until you get a better answer there are other Roms you can try,
https://www.getdroidtips.com/custom-rom-moto-g3-turbo/

I am assuming that you are using HavocOS 2.x (pie) by Archer , i believe that the camera bug was resolved in future updates. And about the vendor image mismatch error, it is nothing to be worried about just ignore that (it is not causing the bugs). About the call issue it is something that I am unaware of. Also please dont wipe the vendor partition and there's no real need to flash stock.
I would highly recommend you to flash the latest official TWRP 3.4.0 by Althaf or SHRP 2.3.2 and then flash newer Q ROMs, Q is more stable than P for merlin and there aren't any bugs. There are lots of Q roms available (9-10) including Havoc and other official roms (LOS,AICP).

Charlie-117 said:
I am assuming that you are using HavocOS 2.x (pie) by Archer , i believe that the camera bug was resolved in future updates. And about the vendor image mismatch error, it is nothing to be worried about just ignore that (it is not causing the bugs). About the call issue it is something that I am unaware of. Also please dont wipe the vendor partition and there's no real need to flash stock.
I would highly recommend you to flash the latest official TWRP 3.4.0 by Althaf or SHRP 2.3.2 and then flash newer Q ROMs, Q is more stable than P for merlin and there aren't any bugs. There are lots of Q roms available (9-10) including Havoc and other official roms (LOS,AICP).
Click to expand...
Click to collapse
Actually I am using Havoc os version 3.9 the latest one and still ty big exists. For the call error thing, I just turned off proximity sensor.
But I am still not able to take any photos. Pls help

Charlie-117 said:
I am assuming that you are using HavocOS 2.x (pie) by Archer , i believe that the camera bug was resolved in future updates. And about the vendor image mismatch error, it is nothing to be worried about just ignore that (it is not causing the bugs). About the call issue it is something that I am unaware of. Also please dont wipe the vendor partition and there's no real need to flash stock.
I would highly recommend you to flash the latest official TWRP 3.4.0 by Althaf or SHRP 2.3.2 and then flash newer Q ROMs, Q is more stable than P for merlin and there aren't any bugs. There are lots of Q roms available (9-10) including Havoc and other official roms (LOS,AICP).
Click to expand...
Click to collapse
Can you pls give me the like of the Havoc OS that is most stable with no bugs for this mobile??
I prefer Havoc due to its customisability!!

Rocky7177 said:
Can you pls give me the like of the Havoc OS that is most stable with no bugs for this mobile??
I prefer Havoc due to its customisability!!
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=10763459528675577441
Are you using this one ?? This is the latest I haven't tested it yet. You will find RR by the same dev on AFH which too has good customization and should be bug free (again i haven't tested it yet,both were released yesterday), I use AICP (I am the maintainer) it has no issues.
---------- Post added at 08:15 PM ---------- Previous post was at 08:12 PM ----------
And please switch to official TWRP and reflash the rom, the vendor TWRP is not required nor recommended.
also you might wanna join merlin community at TG @motog3turbo

Charlie-117 said:
https://www.androidfilehost.com/?fid=10763459528675577441
Are you using this one ?? This is the latest I haven't tested it yet. You will find RR by the same dev on AFH which too has good customization and should be bug free (again i haven't tested it yet,both were released yesterday), I use AICP (I am the maintainer) it has no issues.
Click to expand...
Click to collapse
Yes I use this one ( I flashed the previous version of 3.9 too but same bug)
Can you pls provide me of the link of RR (for my device) ??

Rocky7177 said:
Yes I use this one ( I flashed the previous version of 3.9 too but same bug)
Can you pls provide me of the link of RR (for my device) ??
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=10763459528675577385
RR 8.6.3

Charlie-117 said:
https://www.androidfilehost.com/?fid=10763459528675577385
RR 8.6.3
Click to expand...
Click to collapse
While flashing it I should first wipe system,data,and cache(and exclude boot and vendor) right and then flash gapps of Android 10(I prefer nano package)??
I also wanted to know if it supports turbo charging?

Rocky7177 said:
While flashing it I should first wipe system,data,and cache(and exclude boot and vendor) right and then flash gapps(I prefer nano package)??
Click to expand...
Click to collapse
First take backups (both nandroid and migrate) then flash the new TWRP 3.4.0 and then wipe system,data,cache and dalvik cache then flash the RR zip and Gapps (i too use nano) then reboot and then flash magisk if u wish to do so(required for migrate)
---------- Post added at 08:25 PM ---------- Previous post was at 08:24 PM ----------
Rocky7177 said:
I also wanted to know if it supports turbo charging?
Click to expand...
Click to collapse
Yes it does.

Charlie-117 said:
https://www.androidfilehost.com/?fid=10763459528675577385
RR 8.6.3
Click to expand...
Click to collapse
It runs on android 10 or 9? And does it support full screen gestures?

Rocky7177 said:
It runs on android 10 or 9? And does it support full screen gestures?
Click to expand...
Click to collapse
10 and yes it does (almost all Q roms do)

Charlie-117 said:
First take backups (both nandroid and migrate) then flash the new TWRP 3.4.0 and then wipe system,data,cache and dalvik cache then flash the RR zip and Gapps (i too use nano) then reboot and then flash magisk if u wish to do so(required for migrate)
---------- Post added at 08:25 PM ---------- Previous post was at 08:24 PM ----------
Yes it does.
Click to expand...
Click to collapse
Will there be any problem if I use my current version of twrp to flash it? If yes then can you pls yell me how to replace my current twrp recovery with the latest version??

Rocky7177 said:
Will there be any problem if I use my current version of twrp to flash it? If yes then can you pls yell me how to replace my current twrp recovery with the latest version??
Click to expand...
Click to collapse
There shudn't be any problems but i don't see a reason for not upgrading
https://forum.xda-developers.com/2015-moto-g/orig-development/unofficial-twrp-3-2-3-osprey-t3829999
here you go.

Charlie-117 said:
There shudn't be any problems but i don't see a reason for not upgrading
https://forum.xda-developers.com/2015-moto-g/orig-development/unofficial-twrp-3-2-3-osprey-t3829999
here you go.
Click to expand...
Click to collapse
Thanks a lot for the support and help!!
Will let you know how things are going on after flashing the new ROM!!:good:

Rocky7177 said:
Thanks a lot for the support and help!!
Will let you know how things are going on after flashing the new ROM!!:good:
Click to expand...
Click to collapse
Best of luck :fingers-crossed:

Charlie-117 said:
Best of luck :fingers-crossed:
Click to expand...
Click to collapse
Yay, I finally flashed RR ROM and it works like a charm. Never imagined my device would work on Android 10.
Camera and phone work perfectly!!

Rocky7177 said:
Yay, I finally flashed RR ROM and it works like a charm. Never imagined my device would work on Android 10.
Camera and phone work perfectly!!
Click to expand...
Click to collapse
Glad you got it running. If ever you need to update your TWRP and the phone is rooted just use the app,
https://play.google.com/store/apps/details?id=me.twrp.twrpapp&hl=en_GB
:good:

R1ffR4ff said:
Glad you got it running. If ever you need to update your TWRP and the phone is rooted just use the app,
https://play.google.com/store/apps/details?id=me.twrp.twrpapp&hl=en_GB
:good:
Click to expand...
Click to collapse
Well, Thanks for the recommendation. I will sure try it soon.
I wanted to install GCam on my phone as it has really good photo processing capabilities. When I searched about it I came to know that I had to enable Camera2 API. So any idea on how to do it in my phone?? (Moto G Turbo - Merlin)

Rocky7177 said:
Well, Thanks for the recommendation. I will sure try it soon.
I wanted to install GCam on my phone as it has really good photo processing capabilities. When I searched about it I came to know that I had to enable Camera2 API. So any idea on how to do it in my phone?? (Moto G Turbo - Merlin)
Click to expand...
Click to collapse
Sorry I don't use that app. I use,"Open Camera" and I find my G5 stock Camera good enough for me as well