HONOR 4c !!! I guess I am lost - Honor 4C Questions & Answers

Hi guess i messed up completely, i tried to root but lost midway.
Now just want to restore, re configure or what ever you say...just want to bring back device to work. Its honor 4c chm-u01 india(marshmallow) its stuck at honor logo now...need factory firmware ,stock rom or what ever u say...with commands and file....please do help tried every thing boot, recovery, sytem img flashing all...JUST LET ME KNOW HOW TO FIX IT AS THE SERVICE CENTER USE TO FIX THAT DOES THEY HAVE MAGIC ??? file and commands please

If you have TWRP, try to find correct FULL firmware(must be android 5 or higher) from here http://hwmt.ru/hwmtsite/huawei-firmware-finder/
If you find it, make sure the zip has META-INF folder and UPDATE.APP, if there are both -->
1. Put zip into sd-card
2. Boot to TWRP
3. Wipe data, system, cache, dalvik cache
4. Install zip
5. Go to main TWRP menu --> choose reboot --> reboot recovery
(It will boot to stock recovery)
6. Wipe data/ Factory reset
7. Now it should boot
TIP:
It might not need to be exactly correct firmware, because p8lite and few other kirini 620 devices roms should work on it too.

did you fix your device?

Related

SuperMan-Rom V1.8.1 Aroma - AP will not boot (integrity verification failed)

SuperMan-Rom V1.8.1 Aroma - AP will not boot (integrity verification failed)
On My S7 edge, thought I'd give it another go at trying to root since this rom claims to be almost stock with an option to get rid of all the samsung rubbish (like s-voice) that you don't use ever.
Followed all the steps to root, ON STOCK OS, entered developer mode, allowed OEM, allowed USB debugging, turn off verify installs by USB abd. Now It seems the phone is prepped and ready to go.
Flashed TWRP with latest ODIN 3.11, made a backup of stock OS, back in download mode and flashed required bootloader and modem (BL and CP), boot again into recovery to flash AP (SuperMan-Rom_SM-G93XF_V1.8.1.zip). Went through all the process and it seems fine until 1st boot.
***Every try is showing "Verification Failed, Unable to restart your device. The Integrity verification has failed. You need to reset your device to factory default settings. This will erase all your data."***
Have I Done something wrong to be showing this error every time????
I had the same error message. The cause was that my device was encrypted. TWRP can't handle encryption on the S7 yet. Reboot into TWRP and look at the logs. If it says it couldn't mount /data, then this is probably the same issue I had.
To fix it, I restored the backup OS from TWRP, made a backup of all apps and data to external SD using Titanium Backup and wiped the encrypted partition in TWRP (which removes the encryption and all data). There may be better ways, but this one worked for me.
@Davebnly You need to take backup of the Internal Storage data and then do a wipe using TWRP, Since TWRP cannot handle the Samsung's Encryption the only way to bypass this is by formatting again. This is already mentioned in the Official TWRP Installation post here.
I have this same error after flashing a custom ROM. I did not take a backup of the old stock ROM as it's a new phone and I didn't think I needed to!
Can anyone tell me, if I flash the stock ROM will it let me into the device again?
Is there anyway to wipe the encrypted drive without installing stock ROM?
*UPDATE: I just logged into recovery and did a factory reset and it loaded the custom ROM. Not as lengthy a solution as I expected!
Do these exact steps, Do not miss.
1. Reboot to recovery.
2. Do a data wipe (WIPE>FORMAT DATA) And Say "Yes"
3.Go to Reboot and Reboot back to recovery.
4.Download DM Verify Disabler https://build.nethunter.com/android-tools/no-verity-opt-encrypt/ , Get the latest.
5.Copy in to the phone and flash it.
6.Go to Reboot and Reboot back to recovery.
7.Now Flash any rom as you wish.
8.Make Sure to Wipe Dalvik, Cache after.
Enjoy!!
Shameera_N said:
Do these exact steps, Do not miss.
Click to expand...
Click to collapse
Man, you just saved my life!
Thanks you very much.
Shameera_N said:
Do these exact steps, Do not miss.
1. Reboot to recovery.
2. Do a data wipe (WIPE>FORMAT DATA) And Say "Yes"
3.Go to Reboot and Reboot back to recovery.
4.Download DM Verify Disabler , Get the latest.
5.Copy in to the phone and flash it.
6.Go to Reboot and Reboot back to recovery.
7.Now Flash any rom as you wish.
8.Make Sure to Wipe Dalvik, Cache after.
Enjoy!!
Click to expand...
Click to collapse
Hi, I'm sorry but what does all that mean? Reboot to recovery??? The only option on my phone is the button to RESET DEVICE and I have two weeks worth of photos and videos that I have not backed up yet! Please help!!! FYI, I have the same exact message telling me to erase all my data because I need to reset my device. Nooo, I am so scared right now.

Phone wont boot

hey all. recently i tried to use hwota 8 to go from emui 8 china to emui 8 india. during the processs where it askd for bootloader unlock code (i used change location) it failed (remote password wrong). so i disconnected and manually booted to fastboot and unlocked my bootloader. but now the device wont boot, its stuck on your device is booting screen. i cant enter fastboot, erecovery or bootloader, however when i connect it to my pc sound plays. please help me anyone i am worried i cant also use dload
@Ramesh006 can you help me out?
Fixed. A while ago actually. Posting so that anyone in the same situation can ask
Good idea is writing Solution whitout waiting another in same condition...
Fixed. A while ago actually. Posting so that anyone in the same situation can ask
Click to expand...
Click to collapse
I have the same situation . what Solution ????
When you say same do you mean exactly same like no fastboot, recovery etc. And did it happen after HWOTA 8. Please tell me exactly what happened so I can guide you better
MadDog.76 said:
Good idea is writing Solution whitout waiting another in same condition...
Click to expand...
Click to collapse
+1
Oh well. If you want guide then sure. Here you go.
First of all let your battery drain completely. Once battery is dead. Plug your phone into charging and as soon as it shows three options boot screen quickly press Volume Up to boot into recovery. It will boot TWRP. Only if you tried via HWOTA 8. Read OP to know complete story. Now once in TWRP keep your phone on charging and don't let it shutdown. In TWRP go to Wipe and Format Data. Do it one to two times. Now go to Advanced Wipe and individually select each of the following one by one.
Cache
Dalvik Cache
Data
Internal
System.
First select repair file system and then after it repair wipe it individually. Then do a collective wipe. One or two Swipe to factory reset. After this cleansing flash firmware for Oreo of the build you were trying to go-to via Hurupdater. Search for it and follow exact guide. After that select Reboot Phone and when it's powering on, you should get three options menu. Press Volume Up to enter erecovery. This time you will boot normal recovery. Factory reset and then Format cache. Reboot system. First boot will take time. Be patient.
After you reboot you will notice several apps missing and themes not working as well as pinkish wallpaper instead of purple one. To fix flash any Oreo Compatible TWRP or the TWRP form Elemental ROM thread. Go-to wipe and format data. Then advanced wipe and select Data Internal System Cache and Dalvik. Wipe and then reflash Firmware via Hurupdater. After it finishes, reboot system and then reboot into stock recovery. Perform factory reset and then format cache. Reboot.

[HELP] Lockscreen clock went on top, themes not working properly

Hi guys. I recently rebranded my Honor 6X from BLN L22 (oreo) to BLN AL10. I used HuRUpdater method to flash the system via TWRP. However, after booting, I noticed that the clock on the lockscreen went on top instead on the bottom,which looks weird. Also, I noticed that the Themes app doesnt show customizqtion options (only fonts).
Why am I getting this? And how can I fix this? It seemd that the system Is not also working properly. I think there might be some problems on flashing on the system because TWRP couldnt mount the data partition.
Please guys. I need your HELP. Thank you very much!
It's an incomplete flash pretty easy to fix. For this you need an external Micro SD card. About 8 GB should do. You also need the three firmware archives you originally downloaded to go to Oreo. And rename them as you did before. Now search for Hurupdater and download latest. You can also get more instructions there over the archives. Place the three archives as well as Hurupdater in the same folder. Instructions in above mentioned thread.
Now flash TWRP. Oy Oreo Compatible TWRP is the one from Elemental ROM thread for the Honor 6x. Grab it and flash it using the command:
fastboot flash recovery_ramdisk RECOVERY-V2.img
Now boot into TWRP. Go to Wipe -> Format Data -> Yes.
Once it completes press back Twice and now select Advanced Wipe. Select Dalvik/Art Cache, Cache, Data, Internal & System. Swipe to Wipe. Now go to install and select only Hurupdater to flash. Press Volume Down when prompted. Flashing will take 5-8 mins. Now once flash complete press Wipe Cache Dalvik and after wiping press Reboot System Now. As device boots up and shows three warning screen, press and hold Volume Up. Boot into recovery and do a factory reset. Then format Cache and reboot. First boot will take 10 mins. Good luck. Ask for more help.

[Solved] Help to flash custom ROMs

Hello everybody,
I bought a Oneplus 7 Pro a few days ago and I'm preparing it for my daily usage. It's my fourth Android smartphone, and the third Oneplus. So far, I managed to flash everyone of them, with no major issues.
And then, the Oneplus 7 Pro suddenly appeared
I used this tutorial to unlock the bootloader and flash the custom recovery.
From my understanding, the custom recovery is flashed in the Recovery Ramdisk and available for both A & B slots.
For now, I have A and B slots with stock OSS, unlocked bootloader, custom recovery and Magisk. All of this is working.
There began my problems. I want to flash a custom ROM without Gapps and I fail to do it. All instructions around ROM threads seems different to me, I don't get the thing about A & B slots, when I flash one rom, it boots as usual on the stock ROM, if I flash both slots, It causes bootloops and if I manage to launch the recovery, my internal storage isn't detected and I can't restore any backup.
I already used MSMDownload to restore the phone completely once.
Can somebody explain to my dumb person how to do it proprely ? Thanks in advance ! :fingers-crossed:
TL;DR : I fail to flash a custom ROM and make it work.
Yes I had same issues when rooted, it means you lost root. You can try tool all in one to flash recovery and magesik via fastboot. If that doesn't restore your access, on twrp you will have to type in format, then mount, then add rom to storage(this method wipes everything beware)
djhulk2 said:
Yes I had same issues when rooted, it means you lost root. You can try tool all in one to flash recovery and magesik via fastboot. If that doesn't restore your access, on twrp you will have to type in format, then mount, then add rom to storage(this method wipes everything beware)
Click to expand...
Click to collapse
For now, my phone is working nicely. But that's the process of flashing a new ROM that fails. Recovery and Magisk are already and working.
Factory reset
Flash rom
Flash twrp installer
Reboot recovery
Format data
Reboot system
i boot all roms with these steps
WesTD said:
Factory reset
Flash rom
Flash twrp installer
Reboot recovery
Format data
Reboot system
i boot all roms with these steps
Click to expand...
Click to collapse
Thanks, I will try.
When you flash the ROM, does TWRP tell you that if you want to continue you need to reboot recovery ? If so, do you ? Do you reboot recovery on the same slot, or do you flash both ?
draentor said:
Thanks, I will try.
When you flash the ROM, does TWRP tell you that if you want to continue you need to reboot recovery ? If so, do you ? Do you reboot recovery on the same slot, or do you flash both ?
Click to expand...
Click to collapse
Nope, it doesnt tell you anything. Just reboot recovery from reboot menu. Don't touch the slot options
Thanks for your advices.
I'm trying right now, here's my steps :
- Wipe Data, Cache, Dalvik Cache (the standard Factory Reset)
- Install ROM : TWRP logs show that he's flashing on inactive slot A, then B. After that logs said " To flash additional zips, please reboot recovery to switch to the updated slot ". I'm going back on the menu
- Install TWRP Installer like previously
- Reboot Recovery : TWRP ask me if I want to install the TWRP App, I dismiss. After reboot of the recovery, it asks if I want to keep System Read Only, I swipe to allow modifications
- Wipe Data : Can't do it because TWRP is unable to mount storage. And after further investigations, I'm now on slot A, not B as before.
- Reboot recovery to slot B
- Wipe Data on slot B
- Reboot system
And It still booting on the stock Oxygen OS Rom, not the custom one installed before. I'm lost
The problem is that you are not performing factory reset.
Wipe data is not enough,you gotta go to wipe-format data-enter yes and swipe.
That is why you are getting bootloops and twrp unable to mount storage problem.
A/B is pretty simple.
You got two slots for many partitions like system vendor boot and all,but a single data partition.
Flash a rom from one slot,it always gets flashed to the other slot no matter what.So next time you reboot to recovery or system it's gonna be on the other slot.So here is the problem..one rom cannot decrypt data which was initially encrypted by another rom..so you gotta perform a data format instead of wipe.Thats it.
draentor said:
Thanks for your advices.
I'm trying right now, here's my steps :
- Wipe Data, Cache, Dalvik Cache (the standard Factory Reset)
- Install ROM : TWRP logs show that he's flashing on inactive slot A, then B. After that logs said " To flash additional zips, please reboot recovery to switch to the updated slot ". I'm going back on the menu
- Install TWRP Installer like previously
- Reboot Recovery : TWRP ask me if I want to install the TWRP App, I dismiss. After reboot of the recovery, it asks if I want to keep System Read Only, I swipe to allow modifications
- Wipe Data : Can't do it because TWRP is unable to mount storage. And after further investigations, I'm now on slot A, not B as before.
- Reboot recovery to slot B
- Wipe Data on slot B
- Reboot system
And It still booting on the stock Oxygen OS Rom, not the custom one installed before. I'm lost
Click to expand...
Click to collapse
lol i wrote all steps but you didn't do all of them. Use swipe to wipe for factory reset and you didn't format data
Joker123## said:
The problem is that you are not performing factory reset.
Wipe data is not enough,you gotta go to wipe-format data-enter yes and swipe.
That is why you are getting bootloops and twrp unable to mount storage problem.
A/B is pretty simple.
You got two slots for many partitions like system vendor boot and all,but a single data partition.
Flash a rom from one slot,it always gets flashed to the other slot no matter what.So next time you reboot to recovery or system it's gonna be on the other slot.So here is the problem..one rom cannot decrypt data which was initially encrypted by another rom..so you gotta perform a data format instead of wipe.Thats it.
Click to expand...
Click to collapse
Thanks for the explanation !
WesTD said:
lol i wrote all steps but you didn't do all of them. Use swipe to wipe for factory reset and you didn't format data
Click to expand...
Click to collapse
Well yes, I didn't understood the difference between Wipe and Format Data.
So let's resume :
Unlock Bootloader
Advanced -> Install Recovery Ramdisk : Install TWRP
Install -> Flash TWRP Installer
Install -> Flash Magisk
Reboot -> System : Reboot on stock OxygenOS Rooted
Then
Wipe -> Factory Reset : Wipe Data, Cache and Dalvik Cache, that means you just have to swipe on TWRP.
Install -> Flash ROM : Use the install function and install the ROM
Install -> Flash TWRP Installer : Don't reboot, go back and install as the previous step
Reboot -> Recovery : Reboot TWRP and it automatically load the other slot
Wipe -> Format Data : Click and type yes
Reboot -> System : Just reboot and it should load the installed ROM
is wiping internal storage compulsory?
aaryan45 said:
is wiping internal storage compulsory?
Click to expand...
Click to collapse
How would you do it ? This is an open discussion, I can't find one and only way of doing it
aaryan45 said:
is wiping internal storage compulsory?
Click to expand...
Click to collapse
Not wiping.. formatting..that is compulsory if your current data is encrypted
After multiple tries to verify the process :
Wipe -> Factory Reset + : Wipe Data, System, Cache and Dalvik Cache
Install -> Flash ROM : Use the install function and install the ROM
Install -> Flash TWRP Installer : Don't reboot, go back and install as the previous step
Reboot -> Recovery : Reboot TWRP and it automatically load the other slot
Wipe -> Format Data : Click and type yes
Reboot -> System : Just reboot and it should load the installed ROM
Install -> Magisk
Reboot -> System
Install -> Whathever you want
Reboot -> System
It worked !

huawei p30 lite says "your device has loaded different operating system"

Hello Everyone!
I have my huawei p30 lite and got tuck on huawei logo and didn't continue to boot and I suspect that it is a system error so I had flash with firmware. The firmware that I had download and flash is not the firmware for my huawei p30 lite 3gb 128 gb. After I have flash I feel excited that my phone will use again. After flashing firmware the screen says your device has loaded different operating system, I have tried Update and recover system but not work, I also tried update mode but not work also.
Is there anybody can help me or give a tutorial link for me thank you! Your Help is needed.
Hmm, can you get into the bootloader?
What can you see?
Can you send a picture or smth?
@leopanz87
do a fresh CLEAN install of phone's Stock ROM.
jwoegerbauer said:
@leopanz87
do a fresh CLEAN install of phone's Stock ROM.
Click to expand...
Click to collapse
may know how do a clean fresh install and what software is needed to perform it. thanks
Kenora_I said:
Hmm, can you get into the bootloader?
What can you see?
Can you send a picture or smth?
Click to expand...
Click to collapse
i can only see "Your device has loaded different operating system" and continue to erecovery mode, and i had also tried update mode but not work it
@leopanz87
If you have a Custom Recovery like TWRP installed, then
1. from recovery select wipe -> advanced and select cache, data, internal storage, system
2. swipe to wipe everything
Now after wiping, your phone has no Android OS.
3. go to install zip and select the ROM file which you have downloaded and swipe to flash
jwoegerbauer said:
@leopanz87
If you have a Custom Recovery like TWRP installed, then
1. from recovery select wipe -> advanced and select cache, data, internal storage, system
2. swipe to wipe everything
Now after wiping, your phone has no Android OS.
3. go to install zip and select the ROM file which you have downloaded and swipe to flash
Click to expand...
Click to collapse
Do these steps.

Categories

Resources