i can connect my phone to wifi, but after 1 or 2 minutes, the connection seems having problem, it is only uploading, not downloading... any solution to this?
i can see the light of upload blinking, but no light blinking of the download.
mateen123 said:
i can connect my phone to wifi, but after 1 or 2 minutes, the connection seems having problem, it is only uploading, not downloading... any solution to this?
i can see the light of upload blinking, but no light blinking of the download.
Click to expand...
Click to collapse
Maybe it's something with your router or carrier.Does it work fine when using another device?
Mr.Ak said:
Maybe it's something with your router or carrier.Does it work fine when using another device?
Click to expand...
Click to collapse
Yes I have tried with different devices works fine. Its just my phone. Also I am running cm 14.1
mateen123 said:
Yes I have tried with different devices works fine. Its just my phone. Also I am running cm 14.1
Click to expand...
Click to collapse
Maybe try doing a factory reset then.
Related
Device turns off alone
I do it yesterday
http://phandroid.com/2013/11/05/how-to-root-the-nexus-5/
After it downloaded
After this I took with flsdhify
Install it openrecovery-twrp-2.8.3.0-hammerhead
He occasionally turns off me alone
And lights up after a few minutes
And it shows through usb like this
Why is it because I did root?
It is not to be before
Device turns off alone
How do I fix this problem?
Hi, friend. I have the same problem and i can't fix it. Try this method, but i can't do it. i'm stop on step 2 because i can't see my phone i can see only computer's disk.
Vanesso said:
Hi, friend. I have the same problem and i can't fix it. Try this method, but i can't do it. i'm stop on step 2 because i can't see my phone i can see only computer's disk.
Click to expand...
Click to collapse
Um
A working device
I wanted to fix it that it does not happen more
Wait for an answer
haimmalka said:
Um
A working device
I wanted to fix it that it does not happen more
Wait for an answer
Click to expand...
Click to collapse
Try this method (http://forum.xda-developers.com/showthread.php?t=2582142) for your nexus 5, download your partitions and TWRP for nexus 5. And let me know the result.
Hii guyz. Since 20 days my phone switches off wen it is below 15% currently I am using moto g3 osprey 2015
Twrp installed , cm 13 nightly ,gapps 6.0 pico
My phone switches off suddenly when it is below 15%
And wen I charge it back and try to switch it on booting fails and it again it turns off
Every time it switches of it takes 4 booting process to start normally
But wen I use twrp and and reboot d system it starts instantly
What should I do guyz?
Try to re calibrate your battery, look for some app that does this on the play store, charge your phone to 100% and then use the app. Should fix this
theShadow800 said:
Try to re calibrate your battery, look for some app that does this on the play store, charge your phone to 100% and then use the app. Should fix this
Click to expand...
Click to collapse
Tell me any app
Which does it?
sembu21 said:
Tell me any app
Which does it?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.vitula.batterycalibration&hl=en
theShadow800 said:
https://play.google.com/store/apps/details?id=com.vitula.batterycalibration&hl=en
Click to expand...
Click to collapse
Okk I will try
Okk thanks I will try
theShadow800 said:
https://play.google.com/store/apps/details?id=com.vitula.batterycalibration&hl=en
Click to expand...
Click to collapse
I'm not able to understand how to do it
sembu21 said:
I'm not able to understand how to do it
Click to expand...
Click to collapse
Charge your phone to 100%, then open the app, click on calibrate and then reboot. Make sure that you have root enabled.
theShadow800 said:
Charge your phone to 100%, then open the app, click on calibrate and then reboot. Make sure that you have root enabled.
Click to expand...
Click to collapse
Yeah. It worked thanks dude
I drained the battery and checked it once its absolutely perfect but wen I switch it back on it bootloops 2-3 times
sembu21 said:
Yeah. It worked thanks dude
I drained the battery and checked it once its absolutely perfect but wen I switch it back on it bootloops 2-3 times
Click to expand...
Click to collapse
I dont know about the boot loop, but whenever I had such problems i always did this and never got a bootloop. Sorry :/
theShadow800 said:
I dont know about the boot loop, but whenever I had such problems i always did this and never got a bootloop. Sorry :/
Click to expand...
Click to collapse
Okk
Every time I try it (no batt, up on vol) I get a missing battery sign.
When I try to do it with the battery and plugged in it shows up and I can assign ports but flashtool cannot see it!
Any ideas?
Do you have latest drivers installed?if not install them first.and always keep better in when flashing.
ComradeZ said:
Every time I try it (no batt, up on vol) I get a missing battery sign.
When I try to do it with the battery and plugged in it shows up and I can assign ports but flashtool cannot see it!
Any ideas?
Click to expand...
Click to collapse
It's not really supposed to work with the battery out of the phone anyway.
You are using a USB 2.0 correct? USB 3.0 will not work.
What do you mean flashtool won't see it?
Your selecting the tot file clicking the yellow button and when it says ready you've unplugged and re plugged the device?
Sent from my iPhone using Tapatalk
I'm using 2.0 usb.
How exactly do I get to download mode with battery in it?
Flashtool never gets a yellow go color. It just sits there. When I click go, it fails out.
hyelton said:
It's not really supposed to work with the battery out of the phone anyway.
You are using a USB 2.0 correct? USB 3.0 will not work.
What do you mean flashtool won't see it?
Your selecting the tot file clicking the yellow button and when it says ready you've unplugged and re plugged the device?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Post the screenshots of what you are doing.
Jahanzaibawan said:
Post the screenshots of what you are doing.
Click to expand...
Click to collapse
Nevermind, got a new battery and I was able to go back to stock kitkat just fine. Now problem of getting no OTAs
ComradeZ said:
Nevermind, got a new battery and I was able to go back to stock kitkat just fine. Now problem of getting no OTAs
Click to expand...
Click to collapse
If you don't have at&t sim,you will never recieve updates ota.
Does it need to be activated or can it be just the sim and no plan on it?
ComradeZ said:
Does it need to be activated or can it be just the sim and no plan on it?
Click to expand...
Click to collapse
It must be activated and functional.
The problem is:
No download mode
No recovery
no fastboot mode
When connecting to the current does not turn on the screen and sometimes it turns on but the load does not rise from 0% and the red LED blinks after a moment stops blinking and no longer turns on the screen, when connecting it to the pc it is detected but with battery it does not light the screen, when removed the battery lights up with a non-battery alert and up comes out fastboot mode started. I have tried with other batteries and still nothing happens.
JhonMtz said:
The problem is:
No download mode
No recovery
no fastboot mode
When connecting to the current does not turn on the screen and sometimes it turns on but the load does not rise from 0% and the red LED blinks after a moment stops blinking and no longer turns on the screen, when connecting it to the pc it is detected but with battery it does not light the screen, when removed the battery lights up with a non-battery alert and up comes out fastboot mode started. I have tried with other batteries and still nothing happens.
Click to expand...
Click to collapse
Sounds like it's dead/hardware failure since youve tried different batteries.
Did you do anything to it like root , rom, etc before this happened? Or was it all stock?
Sent from my iPhone using Tapatalk
hyelton said:
Sounds like it's dead/hardware failure since youve tried different batteries.
Did you do anything to it like root , rom, etc before this happened? Or was it all stock?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I got a successful root but when I try to downgrade lollipop to kitkat my pc is shut down and the process is not complete.
Something like that happens: www . youtube.com/watch?v=6DVHQvcAVwQ
JhonMtz said:
I got a successful root but when I try to downgrade lollipop to kitkat my pc is shut down and the process is not complete.
Something like that happens: www . youtube.com/watch?v=6DVHQvcAVwQ
Click to expand...
Click to collapse
You would have to replace the motherboard.
Sent from my iPhone using Tapatalk
hyelton said:
Sounds like it's dead/hardware failure since youve tried different batteries.
Did you do anything to it like root , rom, etc before this happened? Or was it all stock?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
hyelton said:
You would have to replace the motherboard.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Another possibility is not there?
JhonMtz said:
Another possibility is not there?
Click to expand...
Click to collapse
There may be an unbrick guide in the general section to do a Pinout which will still require taking apart the phone and it would bring back download mode.
Sent from my iPhone using Tapatalk
hyelton said:
There may be an unbrick guide in the general section to do a Pinout which will still require taking apart the phone and it would bring back download mode.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Could you give me the link? I find it difficult to find some terms in English and it would be difficult to find the right one.
JhonMtz said:
Could you give me the link? I find it difficult to find some terms in English and it would be difficult to find the right one.
Click to expand...
Click to collapse
Theres a thread somewhere here but couldnt find it, But this is the same - http://forum.gsmhosting.com/vbb/f49...ts-fix-qhsusb-bulk-_-qualcomm-9008-a-2029025/
hyelton said:
Theres a thread somewhere here but couldnt find it, But this is the same - http://forum.gsmhosting.com/vbb/f49...ts-fix-qhsusb-bulk-_-qualcomm-9008-a-2029025/
Click to expand...
Click to collapse
Thank you very much, I'll try.
JhonMtz said:
The problem is:
No download mode
No recovery
no fastboot mode
When connecting to the current does not turn on the screen and sometimes it turns on but the load does not rise from 0% and the red LED blinks after a moment stops blinking and no longer turns on the screen, when connecting it to the pc it is detected but with battery it does not light the screen, when removed the battery lights up with a non-battery alert and up comes out fastboot mode started. I have tried with other batteries and still nothing happens.
Click to expand...
Click to collapse
There is another possibility. Try another cord. The original cords after a while can be very finicky. Mine was. Make sure the next cord you try is definitely a fast charging data sync cable. Your best best is another of v10 cord. If that doesn't work, then you do indeed have a catastrophic hardware failure. And there is currently no fix 100% fix. There are the methods that the other posters mentioned but if those dont work, then your board is shot. Also, after trying the new cord. Reinstall the lg drivers on your pc.
Hi, 2 days ago my OPO just keeps turning off after a few seconds even when I'm in twrp screen. Even with the wall charger connected, but if I connect it to a computer or any other system it just works fine and normal.
I have lineage 14.1 and I already try factory reset, OS clean installation again and with previous versions. With gapps or without gapps still turning off. Very strange. Can anybody help? I don't know what to do.
JFPT said:
Hi, 2 days ago my OPO just keeps turning off after a few seconds even when I'm in twrp screen. Even with the wall charger connected, but if I connect it to a computer or any other system it just works fine and normal.
I have lineage 14.1 and I already try factory reset, OS clean installation again and with previous versions. With gapps or without gapps still turning off. Very strange. Can anybody help? I don't know what to do.
Click to expand...
Click to collapse
Replace battery.
Mr.Ak said:
Replace battery.
Click to expand...
Click to collapse
When I do factory reset, reinstall os, do the initial configuration the phone just works normally... Which is very strange...
But thanks for help
JFPT said:
When I do factory reset, reinstall os, do the initial configuration the phone just works normally... Which is very strange...
But thanks for help
Click to expand...
Click to collapse
It'll bootloop if you don't connect the device to charger.That's the sign of dying battery.
Mr.Ak said:
It'll bootloop if you don't connect the device to charger.That's the sign of dying battery.
Click to expand...
Click to collapse
Thanks a lot. I will try that. But isn't strange if i connect to the wall charger still turning off? And sometimes it reboots and stucks in Android is starting screen. Is there a way to test the battery? Last week the phone works just fine and the battery lasts the entire day. I just trying to understand what happened. Thanks again,and sorry for my bad english.
JFPT said:
Thanks a lot. I will try that. But isn't strange if i connect to the wall charger still turning off? And sometimes it reboots and stucks in Android is starting screen. Is there a way to test the battery? Last week the phone works just fine and the battery lasts the entire day. I just trying to understand what happened. Thanks again,and sorry for my bad english.
Click to expand...
Click to collapse
Yes,you can order Usb tester and try it,but instead of wasting time over this,just buy a new battery(look up battery thread in accessories for suggestions).
I think this just happen to me.
If not connecting to charger :
-Rebooting itself when flashing rom
-Bootloop after a few second when using the phone (All rom, even after revert back to COS 13)
-Somehow, it not bootlooping if on fastboot.
If connected to charger :
-Phone working as normally.
-