My "Coolpad Note 3" is not booting into recovery mode after Flashing Cool ui 8 V22 Rom & TWRP Recovery. However Normally its booting absolutely fine and its quite stable Rom. But I seriously need to flash TWRP in order to install SuperSU and Xposed Installer. Anyone Please suggest any solution Asap.
(Also My Titanium Backup(Apps+Data) could only be restored after granting root access).
apalash16 said:
My "Coolpad Note 3" is not booting into recovery mode after Flashing Cool ui 8 V22 Rom & TWRP Recovery. However Normally its booting absolutely fine and its quite stable Rom. But I seriously need to flash TWRP in order to install SuperSU and Xposed Installer. Anyone Please suggest any solution Asap.
(Also My Titanium Backup(Apps+Data) could only be restored after granting root access).
Click to expand...
Click to collapse
Did you flash the correct recovery for your model number?
Have you tried flashing the recovery again?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Yes I Have flashed the correct recovery with SP FLASH TOOL (Mtk 6753 Scatter file). It shows that it will boot into recovery mode but again screen blanks and same process repeats.
apalash16 said:
Yes I Have flashed the correct recovery with SP FLASH TOOL (Mtk 6753 Scatter file). It shows that it will boot into recovery mode but again screen blanks and same process repeats.
Click to expand...
Click to collapse
Did you try booting to recovery using adb?
adb reboot recovery
Droidriven said:
Did you flash the correct recovery for your model number?
Have you tried flashing the recovery again?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
-Hope- said:
Did you try booting to recovery using adb?
adb reboot recovery
Click to expand...
Click to collapse
No... I dont know the exact method for that.
https://forum.xda-developers.com/showthread.php?t=1853159
Is it the universal method?
apalash16 said:
Yes I Have flashed the correct recovery with SP FLASH TOOL (Mtk 6753 Scatter file). It shows that it will boot into recovery mode but again screen blanks and same process repeats.
Click to expand...
Click to collapse
Do you know of your bootloader was unlocked before you flashed the recovery?
If it was locked then that is why it won't boot to recovery.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
---------- Post added at 07:38 PM ---------- Previous post was at 07:33 PM ----------
apalash16 said:
No... I dont know the exact method for that.
https://forum.xda-developers.com/showthread.php?t=1853159
Is it the universal method?
Click to expand...
Click to collapse
Yes, it's the same for all android.
adb reboot recovery
This still doesn't work if your bootloader was locked when you flashed your recovery.
If the bootloader was locked, you'll have to flash a copy of your stock recovery.
Then unlock the bootloader, then flash the recovery. It will probably work correctly then.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Do you know of your bootloader was unlocked before you flashed the recovery?
If it was locked then that is why it won't boot to recovery.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
As I Know, Coolpad Note 3 comes with pre-unlocked bootloader. And Earlier I had TWRP installed in it with the same method. I dont think so The Bootloader was Locked as I Have flashed Cool Ui 8.....nd that was done quite easily.
apalash16 said:
As I Know, Coolpad Note 3 comes with pre-unlocked bootloader. And Earlier I had TWRP installed in it with the same method. I dont think so The Bootloader was Locked as I Have flashed Cool Ui 8.....nd that was done quite easily.
Click to expand...
Click to collapse
Ok, if you had TWRP on it before then it isn't locked.
Did you at any point create a nandroid backup while that version of TWRP was installed? Have you tried flashing that same version of TWRP?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Ok, if you had TWRP on it before then it isn't locked.
Did you at any point create a nandroid backup while that version of TWRP was installed? Have you tried flashing that same version of TWRP?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Have a look at screenshots....is this what u r asking about??
apalash16 said:
Have a look at screenshots....is this what u r asking about??
Click to expand...
Click to collapse
Yes, those are nandroid backups.
Can you flash the recovery that you used to create those backups? Or is that the same recovery that you're trying to flash now but can't get it to boot?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Yes, those are nandroid backups.
Can you flash the recovery that you used to create those backups? Or is that the same recovery that you're trying to flash now but can't get it to boot?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
I dont remember the exact version of Twrp as its not officially available for my device. But ya..I had tried to flash 2-3 recovery.img 's (including the one which I flashed earlier). But no one worked...it just repeats the same process.
https://drive.google.com/file/d/0B_FSn054nUXkN2RudjQwSVBNY3M/view
apalash16 said:
As I Know, Coolpad Note 3 comes with pre-unlocked bootloader. And Earlier I had TWRP installed in it with the same method. I dont think so The Bootloader was Locked as I Have flashed Cool Ui 8.....nd that was done quite easily.
Click to expand...
Click to collapse
The device may have came with bootloader unlocked when you got it, but you flashed a stock update Cool UI 8, if that stock update came with a locked bootloader as part of the update package then your bootloader is locked now, and that would still explain why you can't flash or boot to TWRP.
Verify whether the Cool UI 8 v22 firmware itself came with an updated and locked bootloader. It has nothing to do with whether your device came with unlocked bootloader.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
The device may have came with bootloader unlocked when you got it, but you flashed a stock update Cool UI 8, if that stock update came with a locked bootloader as part of the update package then your bootloader is locked now, and that would still explain why you can't flash or boot to TWRP.
Verify whether the Cool UI 8 v22 firmware itself came with an updated and locked bootloader. It has nothing to do with whether your device came with unlocked bootloader.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Ya I Have checked...Coolpad has locked bootloader for this firmvare version. What should I do now....Should I flash the earlier version of cool ui 8 or Is there any method to unlock ot manually?
(Ps: Not able to find Adb & Fastboot drivers for this device)
apalash16 said:
Ya I Have checked...Coolpad has locked bootloader for this firmvare version. What should I do now....Should I flash the earlier version of cool ui 8 or Is there any method to unlock ot manually?
(Ps: Not able to find Adb & Fastboot drivers for this device)
Click to expand...
Click to collapse
I'm not sure about the bootloader, I didn't find anything about unlocking bootloader for Cool UI 8 v22. Does it have a "OEM unlock" setting in system settings? If so, enable it and then see if you can flash/boot TWRP. Try fastboot with the following command:
fastboot oem unlock
But I did find something about how to root your device, if the information is correct. You might be able to root what you have then use FireFlash or Flashify to flash the Xposed Framework and get it working. You probably won't have unlocked bootloader or TWRP though.
But, you also might be able to downgrade to your previous firmware but I'm not sure if that will unlock your bootloader or not. The locked bootloader might not allow you to downgrade your firmware.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
I'm not sure about the bootloader, I didn't find anything about unlocking bootloader for Cool UI 8 v22. Does it have a "OEM unlock" setting in system settings? If so, enable it and then see if you can flash/boot TWRP. Try fastboot with the following command:
fastboot oem unlock
But I did find something about how to root your device, if the information is correct. You might be able to root what you have then use FireFlash or Flashify to flash the Xposed Framework and get it working. You probably won't have unlocked bootloader or TWRP though.
But, you also might be able to downgrade to your previous firmware but I'm not sure if that will unlock your bootloader or not. The locked bootloader might not allow you to downgrade your firmware.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
https://youtu.be/kad8GY_wWzk
I followed this method and successfully get the twrp installed and rooted my device. Thank You So Much To You too For Your Help Dude.
Related
Hi. Been out the loop for a while and struggling to find the answer to my question.
I'm on 4.4.4 no custom revovery but with root.
I have an OTA notice to go to lollipop, which should be fine, as I have stock evetything?
How do I simply get root back afer the update?
So many posts with options, I'm struggling to find the right answer.
Unlock bootloader, and then either use cf-autoroot or flash latest SuperSU BETA through twrp.
beekay201 said:
Unlock bootloader, and then either use cf-autoroot or flash latest SuperSU BETA through twrp.
Click to expand...
Click to collapse
Thanks, bootloader is already unlocked. I don't really want to install any custom recoveries, so the cf-autoroot sounds like the way to go.
Do you have a link for how to use this method?
Here you go http://autoroot.chainfire.eu/
Sent from my Nexus 5 using Tapatalk
teapea said:
Thanks, bootloader is already unlocked. I don't really want to install any custom recoveries, so the cf-autoroot sounds like the way to go.
Do you have a link for how to use this method?
Click to expand...
Click to collapse
to use a custom recovery you don't need to flash it.. just boot it.
'fastboot boot whatever_custom_recovery_you_want.img'
6.0 Marshmallow with insecure modded kernel and TWRP recovery
This needs testing by someone else. It has been flashed on my own personal phone with no issues.
Requirements- Unlocked bootloader, Draken FX's Bootstack -the fixed version by Turbo2012 found in DrakenFX's thread for the flashable 6.0 update. Must be currently on an LG based ROM NOT CM. After install flash SuperSU install zip, post any issues. You will be able to ADB and Fastboot even if you can only boot splash screen with this kernel so you should be able to recover from almost anything multiple ways. When time allows I will put up a source built 6.0 along the lines of Game Theory's Katana ROM. Everybody is welcome to everything I post and I strongly encourage the young crowd to get involved, these phones don't support their selves.
Downloads:
Tested SuperSU
Working Bootstack for 6.0 MM
Update.zip
Instructions:
Flash Bootstack
Flash Update
Flash Beta SuperSU from link
New debloated version with insecure kernel and init.d support, rooted with Chainfire's Beta 2.71 SuperSU credit to SuperR for the help with the updater perms.
FIXED DOWNLOAD ALL APOLOGIES
Skinny Stylo Alpha version
Credits:
DrakenFX for his flashable zips and kdz files
Turbo2012 fixing and contributing
Chainfire for his SuperSU and he's been here since it started
Saved
Requirements- Unlocked bootloader
Click to expand...
Click to collapse
Does that mean a fastboot oem unlock, or the OEM unlock in the developers tools. If you mean fastboot oem unlock, is that available once you flash stock MM, since it is not in LP?
PS - thank you very much for taking the time to pick this up. Back in the days of the Galaxy S1, I had a build environment setup, and a lot more knowledge (it is amazing that if you don't use it, you lose it), but I have a son now, so I don't have the time to invest in all the hobbies that I want anymore. I will definitely be a guinea pig for you. I am not actually aware of a way to brick the Metro or TMO versions of this phone since we have a kdz -- it is not possible to blow up firmware download mode.
runningnak3d said:
Does that mean a fastboot oem unlock, or the OEM unlock in the developers tools. If you mean fastboot oem unlock, is that available once you flash stock MM, since it is not in LP?
PS - thank you very much for taking the time to pick this up. Back in the days of the Galaxy S1, I had a build environment setup, and a lot more knowledge (it is amazing that if you don't use it, you lose it), but I have a son now, so I don't have the time to invest in all the hobbies that I want anymore. I will definitely be a guinea pig for you. I am not actually aware of a way to brick the Metro or TMO versions of this phone since we have a kdz -- it is not possible to blow up firmware download mode.
Click to expand...
Click to collapse
@runningnak3d
I would prefer to be bootloader unlocked through fastboot oem unlock before doing any mods in 6.0. Every single time I did not I got secure boot error. If you make any system change on 6.0 with locked boot it will not boot.
Thank you for taking the time to do this.
:good::good:
So it's still not possible to update from Lollipop to rooted Marshmallow without unlocking the bootloader via fastboot? A secure boot error might as well be a brick to me. Oh well.
Revenant Ghost said:
So it's still not possible to update from Lollipop to rooted Marshmallow without unlocking the bootloader via fastboot? A secure boot error might as well be a brick to me. Oh well.
Click to expand...
Click to collapse
The main reason I made this was because I can never boot recovery or fastboot manually ( ex. w/hardware buttons) when you have the insecure kernel adb works when at the splash screen so it's easier to recover if you have any problems.
Sent from my LG-H631 using XDA-Developers mobile app
Revenant Ghost said:
So it's still not possible to update from Lollipop to rooted Marshmallow without unlocking the bootloader via fastboot? A secure boot error might as well be a brick to me. Oh well.
Click to expand...
Click to collapse
If you used Draken's guide to root and install TWRP on lollipop, your bootloader will be unlocked.
wrenchman76 said:
If you used Draken's guide to root and install TWRP on lollipop, your bootloader will be unlocked.
Click to expand...
Click to collapse
You only need a "soft" unlock (enable oem unlock in developer mode) to root / install TWRP on lolipop -- no PC required. MM however, requires a "hard" OEM unlock, and that requires a PC.
runningnak3d said:
You only need a "soft" unlock (enable oem unlock in developer mode) to root / install TWRP on lolipop -- no PC required. MM however, requires a "hard" OEM unlock, and that requires a PC.
Click to expand...
Click to collapse
I am currently on lollipop rooted and TWRP installed off of Draken's guide. Do I need to do something else to the bootloader before I flash this ROM?
wrenchman76 said:
I am currently on lollipop rooted and TWRP installed off of Draken's guide. Do I need to do something else to the bootloader before I flash this ROM?
Click to expand...
Click to collapse
Yes, you have to unlock your bootloader with fastboot oem unlock. If you flash this without unlocking your bootloader you will get a secure boot error, and you will have to flash a KDZ and start all over.
Lolipop doesn't come with fastboot. So you have to follow Draken's thread to get stock MM on your device. There is NO other way. Once you have stock MM you can unlock your boot loader with fastboot. Once you have an unlocked boot loader -- THEN you can flash this if you want.
Waiting on the debloated version.
Sent from my LGMS631 using Tapatalk
runningnak3d said:
Yes, you have to unlock your bootloader with fastboot oem unlock. If you flash this without unlocking your bootloader you will get a secure boot error, and you will have to flash a KDZ and start all over.
Lolipop doesn't come with fastboot. So you have to follow Draken's thread to get stock MM on your device. There is NO other way. Once you have stock MM you can unlock your boot loader with fastboot. Once you have an unlocked boot loader -- THEN you can flash this if you want.
Click to expand...
Click to collapse
I can vouch for this. That's exactly what happened to me when I tried to flash this without unlocking the bootloader with fastboot. At least I finally managed to ship my device to LG for repairs today. I'll just chalk it up as another lesson learned.
Revenant Ghost said:
I can vouch for this. That's exactly what happened to me when I tried to flash this without unlocking the bootloader with fastboot. At least I finally managed to ship my device to LG for repairs today. I'll just chalk it up as another lesson learned.
Click to expand...
Click to collapse
You didn't need to ship it back to LG. Firmware download mode is always available (hold vol up while plugging in USB cable -- just vol up, not vol up + power). Continue holding vol up until FW DL mode displays). Then just use the LG flash tool to flash a KDZ. It is a PITA when you have to go back that far, but you can't brick these phones, not with software at least -- they would need to be physically altered
-- Brian
Revenant Ghost said:
I can vouch for this. That's exactly what happened to me when I tried to flash this without unlocking the bootloader with fastboot. At least I finally managed to ship my device to LG for repairs today. I'll just chalk it up as another lesson learned.
Click to expand...
Click to collapse
You sent your device in for a soft brick? You should set up the flash tool for our phone with a 10j.kdz before doing anything. Hope you get it back soon.
Debloated version
Fixing some force close problems on a debloated version now, should be up later today or tonight.
@runningnak3d
Flashing the KDZ seems easy enough. But how could I fix it without unrestricted access to a computer? And my stock charger is broken without a USB cable. I had no choice but to send it in for repairs. Guess I'll be stuck on Lollipop for a while longer, at least.
Edubyah said:
6.0 Marshmallow with insecure modded kernel and TWRP recovery
This needs testing by someone else. It has been flashed on my own personal phone with no issues.
Requirements- Unlocked bootloader, Draken FX's Bootstack -the fixed version by Turbo2012 found in DrakenFX's thread for the flashable 6.0 update. Must be currently on an LG based ROM NOT CM. After install flash SuperSU install zip, post any issues. You will be able to ADB and Fastboot even if you can only boot splash screen with this kernel so you should be able to recover from almost anything multiple ways. When time allows I will put up a source built 6.0 along the lines of Game Theory's Katana ROM. Everybody is welcome to everything I post and I strongly encourage the young crowd to get involved, these phones don't support their selves.
Downloads:
Tested SuperSU
Working Bootstack for 6.0 MM
Update.zip
Instructions:
Flash Bootstack
Flash Update
Flash Beta SuperSU from link
Credits:
DrakenFX for his flashable zips and kdz files
Turbo2012 fixing and contributing
Chainfire for his SuperSU and he's been here since it started
Click to expand...
Click to collapse
Can you post links to DrakenFx post and will this work with CDMA version (ie, Boost Mobile 770 version of hardware)
JBoever said:
Can you post links to DrakenFx post and will this work with CDMA version (ie, Boost Mobile 770 version of hardware)
Click to expand...
Click to collapse
Can the bootloader be unlocked on the CDMA versions (ex. Boost, Sprint, Verizon)? If you can I will make a variant for it. But if you can't NO.
I just found out that the unlocked bootloader in 6.0 survives even the .kdz flashtool. So once you unlock your boot in 6.0 with fastboot oem unlock you never have to do it again even survived kdz downgrade to lollipop and update to 6.0 stayed unlocked.
JBoever said:
Can you post links to DrakenFx post and will this work with CDMA version (ie, Boost Mobile 770 version of hardware)
Click to expand...
Click to collapse
works great on metro ms631 just need wifi to stop turning its self off can you guys fix it! h631/ms631 mm kernel works find no errors help needed fixing wifi connection thanks
Everything is in the title how to root an updated to marshmallow 6045i.
Thanks
wiwild said:
Everything is in the title how to root an updated to marshmallow 6045i.
Thanks
Click to expand...
Click to collapse
Just flash this Supersu
https://download.chainfire.eu/751/SuperSU/
other versions not works
Alek Dev said:
Just flash this Supersu
https://download.chainfire.eu/751/SuperSU/
other versions not works
Click to expand...
Click to collapse
So just to clarify, I have a 6045I factory global unlocked from Amazon, It has never been rooted, bootloader unlocked, nothing. So would I place on SD and apply update through stock recovery, or is there a different method? Really just want root for adaway and xposed. TWRP would be nice, but not necessary. Just don't want a new paperweight. Thanks!
Can i install twrp to flash thid or stock is fine?
You can try windroid toolkit v3.1.
First u have to unlock bootloader then to flash recovery and supersu .
For me it is not recognising my phone hope u will get success.
If try then pls share ur experience.
yash_rathore25 said:
You can try windroid toolkit v3.1.
First u have to unlock bootloader then to flash recovery and supersu .
For me it is not recognising my phone hope u will get success.
If try then pls share ur experience.
Click to expand...
Click to collapse
I downloaded twice, and twice got security that windroid 3.1 has trojan, and was quarantined!?!
dongarritas said:
I downloaded twice, and twice got security that windroid 3.1 has trojan, and was quarantined!?!
Click to expand...
Click to collapse
For me it got downloaded but showing device either offline or unauthorized
I'd run a full virus /malware scan.... I use 360 Security on mobile devices and PC's. It, along with SUPERAntiSpyware has served me well.
Sent from my LG-H631 using Tapatalk
Just install the TWRP 3.0 in android development (it has instructions in the thread) and then you can flash the supersu mentioned.
famewolf said:
Just install the TWRP 3.0 in android development (it has instructions in the thread) and then you can flash the supersu mentioned.
Click to expand...
Click to collapse
Bro,
They also on locked bootloader with no fastboot commands working like me.
yash_rathore25 said:
Bro,
They also on locked bootloader with no fastboot commands working like me.
Click to expand...
Click to collapse
Well the obvious choices are:
1) Use mobile Q to restore to 5.0.2...unlock bootloader, install twrp....upgrade to marshmallow using the modified update.zip that doesn't wipe recovery and finally root using the file mentioned.
or
2) Live with it as it is until someone figures out how to restore fastboot which will probably still require downgrading.
famewolf said:
Well the obvious choices are:
1) Use mobile Q to restore to 5.0.2...unlock bootloader, install twrp....upgrade to marshmallow using the modified update.zip that doesn't wipe recovery and finally root using the file mentioned.
or
2) Live with it as it is until someone figures out how to restore fastboot which will probably still require downgrading.
Click to expand...
Click to collapse
I am waiting some days otherwise i will downgrade
BTW my device is recognized in fastboot but commands not working. It means fastboot is working but commands have been changed
dongarritas said:
So just to clarify, I have a 6045I factory global unlocked from Amazon, It has never been rooted, bootloader unlocked, nothing. So would I place on SD and apply update through stock recovery, or is there a different method? Really just want root for adaway and xposed. TWRP would be nice, but not necessary. Just don't want a new paperweight. Thanks!
Click to expand...
Click to collapse
The root install it with TWRP !
Alek Dev said:
The root install it with TWRP !
Click to expand...
Click to collapse
That's the problem. This phone is totally stock with nothing done but the update. I literally charged it, turned it on and 20 minutes later 6.0.1 was nagging for install, which I did. There is now the OEM unlock switch in developing options, but I don't know where to start, or flash.
Sent from my LG-H631 using Tapatalk
dongarritas said:
That's the problem. This phone is totally stock with nothing done but the update. I literally charged it, turned it on and 20 minutes later 6.0.1 was nagging for install, which I did. There is now the OEM unlock switch in developing options, but I don't know where to start, or flash.
Sent from my LG-H631 using Tapatalk
Click to expand...
Click to collapse
You must go back to 5.0 to install and then update it because in 6.0.1 update Removes Fastboot commands so you can't install it twrp....
I have a problem with rooting 6039Y on rom 6.0.1 by persona78. Stock rom 5.0.2 and root working fine. When i flash via TWRP after the update to MM i get this message:
-Cheking patch status
---Already patched, attempting to find stock backup
---Stock restore failed, attempting ramdisk restore
---Ramdisk restore failed, aborting
This solution - echo SYSTEMLESS=true >> /data/.supersu - not working.
Phone was simlock removed via furiousgold, maybe this is a problem?
Alcatel one touch idol 3 (5.5) 6045Y
i have this model Alcatel one touch idol 3 (5.5) 6045Y
full unlocked with unlocked bootloader and sim free (single sim model) with 6.0.1 from alcatel not updated to 6.0.1 already i got with 6.0.1 from alcatel (i know you will say "but that phone has 5.0 and updated to 6.0.1 trough a phone update online" But it is not updated ,phone came directly from factory and how i can root this device if there is any help.
Still no solution to rooting stock MM 6045I?
Hope this helps someone
I know this thread is dead, but replying so people can find the information easier.
I used this guide to flash twrp then used twrp to root on stock 6045O 6.0.1.
hi guys ,
I`ve read this thread https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
my ask : Does this rooting goes well with MHA-L29C185B172 ?
if not , then how can i root my device SAFELY ?
thanks all
one, post, no experience with rooting android phones, do NOT root this phone unless there is some important reason to.
do ALOT more reading before you even think about rooting
Thx to reply. Like the others i wanna root to have root apps in my phone ,
Thx . Wanna have apps requires root in my phone . That simple
You don't even need to decrypt if you don't want to.
Unlock Developer Options (Settings - About: tap build number until it says it's enabled)
Go to the Developer Options and enable OEM Unlocking
Unlock bootloader
Flash twrp 3.1.0
Flash SuperSU no-decrypt (https://mega.nz/#!lkV0jbYJ!b1h-5uVksvpt7rw0tRHV7Qxjwk2xkKox0w-iRsCLlbU)
Have fun.
For decryption follow the decrypt guide.
To undo root and relock (Bootloader Locked) flash a stock firmware using the Force flash guide under Guides or use firmware finder).
For Magiskv12 root you need firmware B182+
super!!! , I did unlock the device and flashed twrp ,then tried install SU but failed , that made me afraid of bricking if i did further action
nawraz said:
super!!! , I did unlock the device and flashed twrp ,then tried install SU but failed , that made me afraid of bricking if i did further action
Click to expand...
Click to collapse
Original SuperSU 2.79 won't install. We have no loop support in kernel pre-B182. And even with support it doesn't install. The one I linked is a phh supersu hybrid. It uses phh su's method of installing, but installs SuperSU.
ante0 said:
Original SuperSU 2.79 won't install. We have no loop support in kernel pre-B182. And even with support it doesn't install. The one I linked is a phh supersu hybrid. It uses phh su's method of installing, but installs SuperSU.
Click to expand...
Click to collapse
Hi. I just happen to come across your post and noticed you said that there is no loop support pre-B182. I have the Chinese version with B213. Some apps, like Linux on Android need, unless something has changed, loop support as well as root. Do you have a reference or a link about the loop support on this phone? Thanks!
I failed install su however still waiting for any updates
nawraz said:
I failed install su however still waiting for any updates
Click to expand...
Click to collapse
You flashed the one I linked? And which twrp do you use?
ante0 said:
You don't even need to decrypt if you don't want to.
Unlock bootloader
Flash twrp 3.1.0
Flash SuperSU no-decrypt (https://mega.nz/#!lkV0jbYJ!b1h-5uVksvpt7rw0tRHV7Qxjwk2xkKox0w-iRsCLlbU)
Have fun.
For decryption follow the decrypt guide.
To undo root and relock (Bootloader Locked) flash a stock firmware using the Force flash guide under Guides or use firmware finder).
For Magiskv12 root you need firmware B182+
Click to expand...
Click to collapse
Just would like to say that it's not fair to say him that in case that the second entry said: One post on xda and he wants to root!
I think the problem is the order you gave him @ante0 (MAYBE!)
Unlock bootloader
flash TWRP
And I think he now has a BIG problem bc you DIDN'T said or forced him to go into developer settings and turn on OEM-unlock!
@nawraz did you turned on OEM-unlock in developer settings?
if you boot into fastboot mode are BOTH (bootloader and FRP = unlocked (in red letters), or and I really hoper NOT is FRP lock (in green letters)???
Maybe that is now the problem for him, not being able to flash SuperSU?
If you have luck @nawraz then try to flash TWRP 3.0.2-2 and with that SuperSU2.79
If you have root then you can install latest TWRP (3.1.0-1)
If you can't flash anything... oh oh!
FootSlave said:
Just would like to say that it's not fair to say him that in case that the second entry said: One post on xda and he wants to root!
I think the problem is the order you gave him @ante0 (MAYBE!)
Unlock bootloader
flash TWRP
And I think he now has a BIG problem bc you DIDN'T said or forced him to go into developer settings and turn on OEM-unlock!
@nawraz did you turned on OEM-unlock in developer settings?
if you boot into fastboot mode are BOTH (bootloader and FRP = unlocked (in red letters), or and I really hoper NOT is FRP lock (in green letters)???
Maybe that is now the problem for him, not being able to flash SuperSU?
If you have luck @nawraz then try to flash TWRP 3.0.2-2 and with that SuperSU2.79
If you have root then you can install latest TWRP (3.1.0-1)
If you can't flash anything... oh oh!
Click to expand...
Click to collapse
He already unlocked and flashed twrp.
3.1.0 installs SuperSU fine. 3.0.3 does not.
And if oem was locked he wouldn't even be in twrp as you can't flash anything with fastboot if it is locked.
But I'll update my post in case anyone does miss to unlock oem.
Hope you don't get me wrong!
Just said that bc I had that problem 5 days ago and the only thing that helped was funky!
I had a softbrick and a reboot always kicked me into eRecovery
I just had eRecovery and fastboot!
Bootloader relocked and frp locked!
Stupid me relocked the bootloader bc I read that you then can unlock oem, then unlock bootloader again!
Well, that was a mistake!
Send from Huawei Mate 9 with Tapatalk
FootSlave said:
Hope you don't get me wrong!
Just said that bc I had that problem 5 days ago and the only thing that helped was funky!
I had a softbrick and a reboot always kicked me into eRecovery
I just had eRecovery and fastboot!
Bootloader relocked and frp locked!
Stupid me relocked the bootloader bc I read that you then can unlock oem, then unlock bootloader again!
Well, that was a mistake!
Send from Huawei Mate 9 with Tapatalk
Click to expand...
Click to collapse
Yeah. Only way then would be to rebrand to C636 using the DLOAD method, then rebrand back to your stock version using the Update thread under Guides. The latter requires twrp though so you'd need to rebrand first to get a working system.
To be honest I just figured he had already unlocked and flashed twrp as he was in the decrypt thread
Missing oem was an error on my side. It was long since I had to unlock oem xD
ante0 said:
You flashed the one I linked? And which twrp do you use?
Click to expand...
Click to collapse
hi , i used twrp-3.0.2-2 successfully and failed with superuser-r310
nawraz said:
hi , i used twrp-3.0.2-2 successfully and failed with superuser-r310
Click to expand...
Click to collapse
Weird. I tested with 3.1.0 a few days ago. But I guess it could have to do with builds. 3.1.0 is using kernel for B182. Maybe it's fixed if you use 3.1.0 with B182.
Oh well, good you managed to install it anyway.
Edit: I tested with the SuperSU I linked.
mscion said:
Hi. I just happen to come across your post and noticed you said that there is no loop support pre-B182. I have the Chinese version with B213. Some apps, like Linux on Android need, unless something has changed, loop support as well as root. Do you have a reference or a link about the loop support on this phone? Thanks!
Click to expand...
Click to collapse
All I know is that it wasn't present in builds before B182.
@st_voss is the one who found out it was added in B182 (Kernel build April. 11th probably as that's what I have on B182.).
It might be present in B181 on C636 as well, that was released 8th of May.
mr. ante0 ..... u r the man , thank you so much
thank you guys i finally rooted my mate 9 safely ,,,,, thanks n credits to ante0
thank you guys i finally rooted my mate 9 safely ,,,,, thanks n credits to ante0
I need some help with my Honor 6x. I'm trying to get a solution or procedure to reset my phone. the firm where says generic _a15 when connecting it to the computer. The manager won't update it either just keeps giving me a fail error. I have tried to root it but I think since the software is wrong it's not taking the root. can anyone help or point me in the direction o what I need to do. If this has already been answered My apologies and can I get the link. thank you.
Do you have an unlocked bootloader? What's your Android version?
Mannan Qamar said:
Do you have an unlocked bootloader? What's your Android version?
Click to expand...
Click to collapse
yes, the boot loader is unlocked. I believe it was rooted before. android 7.0
slimjimz81 said:
yes, the boot loader is unlocked. I believe it was rooted before. android 7.0
Click to expand...
Click to collapse
Flash the two small update zips via TWRP
Not the update.zip which is 1+ GB in size but the two small zips via TWRP
I been trying to get twrp to take but it keeps giving me the erecovery.
slimjimz81 said:
I been trying to get twrp to take but it keeps giving me the erecovery.
Click to expand...
Click to collapse
What command you use. You have Android 7 or 8 right now
Android 7.0 I have been using that app. That boots it into recovery then tries to flash it. I tried to get the adb cmd to work but it doesn't find the file. I know this all sounds like gibberish but that's why I'm lost.