Related
Hi everyone,
I flashed the leaked ROM I9505XXUFNA5 to my GT-I9505 LTE back in January when it came out, all went fine. However, now when I try to flash the official Android 4.4.2, say I9505XXUFNB8, via odin v3.09 the process will fail after 20 seconds and I have to flash the leaked ROM again in order to have a functioning phone. My phone is carrier free and it is not rooted.Can anyone help me please !
Thank you in advance,
MaximusDacicus
MaximusDacicus said:
Hi everyone,
I flashed the leaked ROM I9505XXUFNA5 to my GT-I9505 LTE back in January when it came out, all went fine. However, now when I try to flash the official Android 4.4.2, say I9505XXUFNB8, via odin v3.09 the process will fail after 20 seconds and I have to flash the leaked ROM again in order to have a functioning phone. My phone is carrier free and it is not rooted.Can anyone help me please !
Thank you in advance,
MaximusDacicus
Click to expand...
Click to collapse
You just killed your EFS :/
You still got a chance:
you can stay with the leaked rom, but you will have to install the latest "modem" (included in rom failed to install) while you keep the romactually installed
thats the only way it can be lucky and may be EFS get back to work may be. I suppose you dont have any EFS backup, so if restoring it fails that way --> you will have to get it repaired. Will be at least 40$ i think...
There a many posts on xda about EFS, but once gone, it is gone. Feel free to read some hours about it
LS.xD said:
You just killed your EFS :/
You still got a chance:
you can stay with the leaked rom, but you will have to install the latest "modem" (included in rom failed to install) while you keep the romactually installed
thats the only way it can be lucky and may be EFS get back to work may be. I suppose you dont have any EFS backup, so if restoring it fails that way --> you will have to get it repaired. Will be at least 40$ i think...
There a many posts on xda about EFS, but once gone, it is gone. Feel free to read some hours about it
Click to expand...
Click to collapse
1. IMEI code is not messed up (it's the same as the one on on the package);
2. I still have carrier signal;
3. I can lock the sim card by pin code
Do you know other signs that would lead to the conclusion that the EFS file is broken ?
MaximusDacicus said:
1. IMEI code is not messed up (it's the same as the one on on the package);
2. I still have carrier signal;
3. I can lock the sim card by pin code
Do you know other signs that would lead to the conclusion that the EFS file is broken ?
Click to expand...
Click to collapse
Mohahah "My phone is carrier free " <-- thought you can-'t get carrier signal anymore lol.
So you're fine i suppose
sry for making trouble. I just missunderstood your writing.
Means you just want to get "back to the root" ?
LS.xD said:
Mohahah "My phone is carrier free " <-- thought you can-'t get carrier signal anymore lol.
So you're fine i suppose
sry for making trouble. I just missunderstood your writing.
Means you just want to get "back to the root" ?
Click to expand...
Click to collapse
Carrier free it means that my phone it's not sim locked in any network. My phone is working fine. I just want to install an official ROM not to stay with the leaked one. I want to install the one for my country so that when I connect to samsung kies via PC the csc and pda of my phone to match up in order to receive updates or to simply for KIES to recognise my phone. The bottom line is that I find it strange that I can't flash 4.4.2 product code COA (Romania) I9505XXUFNB8.
MaximusDacicus said:
Carrier free it means that my phone it's not sim locked in any network. My phone is working fine. I just want to install an official ROM not to stay with the leaked one. I want to install the one for my country so that when I connect to samsung kies via PC the csc and pda of my phone to match up in order to receive updates or to simply for KIES to recognise my phone. The bottom line is that I find it strange that I can't flash 4.4.2 product code COA (Romania) I9505XXUFNB8.
Click to expand...
Click to collapse
what region is the leaked fw for?
It's from the Sammobile, It seems I can't post links.
Country more likely Germany
MaximusDacicus said:
It's from the Sammobile, It seems I can't post links.
Country more likely Germany
Click to expand...
Click to collapse
Thats due to its a branded rom you tried to install (COA = cosmote branded).
Here is the unbranded version you need (ROM = unbranded for your country):
--> http://samsung-updates.com/details/24878/Galaxy_S_4_Snapdragon/GT-I9505/ROM/I9505XXUFNB9.html
First of all, sorry if this has been answered here, I simply can't find a definitive answer for our S6, let me explain better.
As you may know, I'm not a newbie here or in other forums, I've rooted most of my phones (Not this one) and have installed custom roms dozens of times to all of them, BUT, I'm definitely a newbie about what I need here, I'm trying to see if I can change my SM-G920i region from XSA (Australia) to any other one, India in this case. I have read tons of threads and posts and that's what is confusing me, in some threads there are people saying that they did it and is working great, in that same threads there are people saying that they did it but Knox got tripped, there are others that say that the device is soft bricked and others are saying that they have read somewhere that changing the CSC from it's original one may brake future Samsung pay.
So, this phone is paid by my office, they allow me to do what I want to it while I'm able to just put it back as it came from factory, so that means that I can root it if it doesn't trip Knox, that I can install anything while I can simply go back anytime they need me to, and obviously, Samsung pay works when it finally comes. With this in mind, can somebody answer me a couple of questions?
1-) I know it's possible to do it, but is it true that by doing this I'll have Samsung pay issues? I doubt that knox will be tripped if I do it with odin, but besides knox, is there any possibility that Samsung Pay will not work in certain regions (India in this case) and that's why some are saying that it will break it?
2-) If I download the firmware and flash it via Odin, I'm reading that it won't brick the phone is done via Odin, but in worst case scenario I assume that I can always go back to original one and it gets factory reset, am I right?
3-) If I flash it correctly as I expect an it doesn't brick, does this means that it will change PDA and CSC versions all together, that it will basically become a device from the new flashed region? So if I flash the India one to my XSA (Australia) now it will work completely as an India device and should get future OTA like the rest?
Again, sorry if this has been asked and answered but going back a lot of pages here can't give me definitive answer, thanks in advance for those of you kind enough to answer to this.
Flash a G920i ROM via odin other than your own region/country:
http://www.sammobile.com/firmwares/database/SM-G920I/
roydok said:
Flash a G920i ROM via odin other than your own region/country:
http://www.sammobile.com/firmwares/database/SM-G920I/
Click to expand...
Click to collapse
Thanks.
In another thread that I have posted (Brazilian one) I was replied to, so because of that I decided to do it, so far everything is working great as expected. Mine was an Australian baseband (XSA), only thing you I noticed is that when I connect it to Smart Switch app for PC or MAC it will still detects the Original CSC, I was curious about it and installed Phone info apk and it shows correctly the information, both PDA and CSC are now from India but it shows that the Original CSC was XSA (In my case), Firmware's CSC code is INU (India) and Active CSC code it says XSA/INU, so I'm assuming that it's showing multiple CSC.
Does somebody know if having the Active CSC showing XSA/INU causes future OTA issues?
After flashing a ROM its good practice to go to recovery mode and do a full wipe of cache and full reset to change CSC to the default of the ROM you flashed.
roydok said:
After flashing a ROM its good practice to go to recovery mode and do a full wipe of cache and full reset to change CSC to the default of the ROM you flashed.
Click to expand...
Click to collapse
Well, in that case I think I will pass for now, as I did a Full wipe cache and Full reset before the Flash but just did a Wipe cache after I flashed it.
The issue is that I basically just finish setting everything back as it was before (about 3 hours and I still haven't set my Contacts Ringtones and Accounts links) so begin again it's a PITA. Once I finish this I'll do a full nandroid backup to have everything as I want, but if I do the Wipe Data/Full Reset and then restore from the Full backup, does this put everything as it was including CSC again? I've been always confused about how deep this restore goes in the system files. Do you know about it?
Thanks.
Try restoring from your backup after the full wipe from recovery. If everything works then you should be ok. Otherwise start from scratch and reinstall everything one by one.
Will try that later today, thanks.
Goodluck.
roydok said:
Goodluck.
Click to expand...
Click to collapse
I tried that and nothing, still the same, then I decided to remove the Re-activation Lock in Find My Mobile settings, and after that and enter to recovery mode, it changed the CSC to India, so for those of you with same issues, remember about Re-activation lock.
Thanks for your help.
Did you have a SIM card inserted when you flashed your ROM with removed reactivation lock?
I had the SIM card on the phone today all the time as I forgot to bring with me the SIM removal tool and didn't have anything to open the Sim card tray, but last night I didn't have the Sim card installed when I flashed the ROM.
So today after I did the Wipe cache Partition and Data and saw that it still had the same issue, I flashed a UK ROM into a SM-G925f that had some African country ROM (have never heard of it before in my life but for the name it sounded like an African country), anyways I did that and everything went great, so that's when I thought what was different between the devices and then I remember that I had turned on the Reactivation lock in my S6 and not in the S6 Edge, so I turned it off, then went to Recovery mode and for my surprise the CSC was already changed without any other reset or anything.
erasat said:
I had the SIM card on the phone today all the time as I forgot to bring with me the SIM removal tool and didn't have anything to open the Sim card tray, but last night I didn't have the Sim card installed when I flashed the ROM.
So today after I did the Wipe cache Partition and Data and saw that it still had the same issue, I flashed a UK ROM into a SM-G925f that had some African country ROM (have never heard of it before in my life but for the name it sounded like an African country), anyways I did that and everything went great, so that's when I thought what was different between the devices and then I remember that I had turned on the Reactivation lock in my S6 and not in the S6 Edge, so I turned it off, then went to Recovery mode and for my surprise the CSC was already changed without any other reset or anything.
Click to expand...
Click to collapse
can you post a screen of CSC page of Phone ** info ** just for reference?
I see you said that CSC changed to India, but Active CSC or also Original CSC?
What I mean is that, now I have a S6 which has Original, Active CSC as MRU...I'd like to put a European fw on it since I'm based in Europe (got this Middle East / Africa phone just because Dual sim it's not available in europe) but I'm in doubt if putting an european fw will still show that CSC has changed from original one and maybe OTA updates won't work.
thanks
Changing csc!!!
I succesfully installed a G920I indian INU rom in my device which had a XSA rom but when i go to recovery it still shows as XSA ....How do i change that to INU?
Hi i am using a galaxy s6edge+ and i am really struggling with the region lock. I have tried a few options of the factory full reset changing the Apn's to the ones needed and using different sim cards.when it used to go into emergency mode "h+" now it won't connect to any internet at all. Can i possibly have any basic assistance with the rom and resetting options to change the csc when i do a hard reset the csc says it's 'multi'. what does that mean? Any region unlocking help would be appreciated so much!
Thanks guys
Hello peeps, i have installed the latest firmware for the SM-G930F from Belgium (G930FXXS3ERL4_G930FVFG3ERJF_PRO) but somehow the carrier apps from vodafone get installed when booting into the system even though the Proximus app should be installed... I have tried to reinstall it multiple time and still have the same outcome? had this problem with my S6 Edge in the past too but i fixed it somehow (I didn't fix it but it fixed itself tho XD)
VoidedKN0X said:
Hello peeps, i have installed the latest firmware for the SM-G930F from Belgium (G930FXXS3ERL4_G930FVFG3ERJF_PRO) but somehow the carrier apps from vodafone get installed when booting into the system even though the Proximus app should be installed... I have tried to reinstall it multiple time and still have the same outcome? had this problem with my S6 Edge in the past too but i fixed it somehow (I didn't fix it but it fixed itself tho XD)
Click to expand...
Click to collapse
There is only one reason this happens, the firmware is not an unbranded international version.
Complete waste of time messing about with Belgian, French,German version etc just Download the BTU firmware from sammobile or direct from Samsung. It's says United Kingdom but it's basically western Europe unbranded.
cooltt said:
There is only one reason this happens, the firmware is not an unbranded international version.
Complete waste of time messing about with Belgian, French,German version etc just Download the BTU firmware from sammobile or direct from Samsung. It's says United Kingdom but it's basically western Europe unbranded.
Click to expand...
Click to collapse
So if i download and install the BTU version what will be different rom the belgian software? Like i remember with my s4 i used to install BTU firmware all the time because there wasn't one for belgium, but didn't notice anything different with my sim card... so i hope this will be the same that i still have the functionallity like i had before i flashed custom roms
VoidedKN0X said:
So if i download and install the BTU version what will be different rom the belgian software? Like i remember with my s4 i used to install BTU firmware all the time because there wasn't one for belgium, but didn't notice anything different with my sim card... so i hope this will be the same that i still have the functionallity like i had before i flashed custom roms
Click to expand...
Click to collapse
The BTU stock holds all the csc codes, base bands, network functions for all of the European region which means once it connects to the network in your country, it automatically detects which system files to use so you "don't notice anything different" than if you had installed country specific like Belgian.
There is always one stock which hold everything for a region, in Europe its the UK unbranded, generic, international, BTU version. It works everywhere in Europe.
okay so i've installed the btu version and it worked just fine, except it was a little slower and idk why. but when i tried to use mobile networks it wouldn't work so i checked my apn settings and my provider wasn't in there so i had to add it manually wich for me turned into an even slower experience on my phone... I really don't know what i did wrong or what happend, so is it possible to get a detailed instruction to flash the stock oreo rom? and also a how to for rooting stock oreo with magisk? because my guess would be that something went wrong when rooting
VoidedKN0X said:
okay so i've installed the btu version and it worked just fine, except it was a little slower and idk why. but when i tried to use mobile networks it wouldn't work so i checked my apn settings and my provider wasn't in there so i had to add it manually wich for me turned into an even slower experience on my phone... I really don't know what i did wrong or what happend, so is it possible to get a detailed instruction to flash the stock oreo rom? and also a how to for rooting stock oreo with magisk? because my guess would be that something went wrong when rooting
Click to expand...
Click to collapse
Hello well unfortunately Belgium isn't important enough country to have your own unbranded stock firmware.
APN settings should install automatically when you connect to mobile network in your country.
There is a specific guide to follow to root S7 on Oreo, please google and follow it exactly.
Also BTU is a stock Oreo ROM.
My wife works in a hospital and we used wifi calling because reception was poor.
It's still poor with Tmobile but no wifi calling. When we moved from At&t the wifi
option was greyed out. Tmobile states that it works fine on their network.
Is there any way to get a samsung s7 g930a and a samsung j7-j727a to use wifi calling
on the Tmobile network?
I'm sure it will probably involve something over my pay grade but I am willing to try
anything needed to get this feature to work
JohnAtlas said:
My wife works in a hospital and we used wifi calling because reception was poor.
It's still poor with Tmobile but no wifi calling. When we moved from At&t the wifi
option was greyed out. Tmobile states that it works fine on their network.
Is there any way to get a samsung s7 g930a and a samsung j7-j727a to use wifi calling
on the Tmobile network?
I'm sure it will probably involve something over my pay grade but I am willing to try
anything needed to get this feature to work
Click to expand...
Click to collapse
If your current firmware has WiFi calling (Volte) You can only use Volte if the network supports it. There are however many apps you can use for WiFi calling look on the play store.
Not sure what volte is, I have had some other issues with the
service that I thought might be resolved by installing a
different rom
Tell me if i'm wrong
Thanks
JohnAtlas said:
Not sure what volte is, I have had some other issues with the
service that I thought might be resolved by installing a
different rom
Tell me if i'm wrong
Thanks
Click to expand...
Click to collapse
Volte is wi fi calling over a network which the network operator supports without the need for a specific app.
Please tell me exactly what you are trying to do
What network are both phones using?
Which networks were the phones on initially?
Have you modified the phones in any way? Root? or TWRP?
What firmware are both phones currently using? Go to Settings>about phone>software information>baseband version G930A????
Sorry for not getting back sooner
Both phones are currently on Tmobile network
Both phones were originally on At&t network
No modification
Samsung s7 g930a baseband version G930AUCS8CRL1
Samsung j7-j727a baseband version J727AUCS4BRL1
Note: Wifi calling was available on original at&t network but is now greyed out on tmobile network
JohnAtlas said:
Sorry for not getting back sooner
Both phones are currently on Tmobile network
Both phones were originally on At&t network
No modification
Samsung s7 g930a baseband version G930AUCS8CRL1
Samsung j7-j727a baseband version J727AUCS4BRL1
Note: Wifi calling was available on original at&t network but is now greyed out on tmobile network
Click to expand...
Click to collapse
Ok since wi fi calling is network specific (some have it some don't) you either need to have unbranded firmware on your phone so it works no matter which network is providing it, or you need to now flash T Mobile firmware for it to work again on your phone.
US networks are a nightmare when it comes to this sort of thing and it's a right pain in the a** to solve it. So what you need to search for now on here is how to flash different firmware on AT&T S7. You should always try to flash unbranded firmware so everything works easily, if not it will have to be T Mobile Oreo.
cooltt said:
Ok since wi fi calling is network specific (some have it some don't) you either need to have unbranded firmware on your phone so it works no matter which network is providing it, or you need to now flash T Mobile firmware for it to work again on your phone.
US networks are a nightmare when it comes to this sort of thing and it's a right pain in the a** to solve it. So what you need to search for now on here is how to flash different firmware on AT&T S7. You should always try to flash unbranded firmware so everything works easily, if not it will have to be T Mobile Oreo.
Click to expand...
Click to collapse
Ok, If you think unbranded is the best way to go can you point me in the right direction
updato.com and sammobile.com both host firmware and have flash guides. SamFirmTool also is good for downloading firmware, but only lets you download the latest version and isn't as user friendly.
For unbranded you'll want to look for G930U firmware.
For best compatibility you flash all 4 files using (AP,BL,CP,CSC) this will wipe the phone clean. Otherwise you can try Home_CSC instead of CSC (So AP, BL, CP, Home_CSC) , which keeps your data but may not fully resolve your issues.
Beanvee7 said:
updato.com and sammobile.com both host firmware and have flash guides. SamFirmTool also is good for downloading firmware, but only lets you download the latest version and isn't as user friendly.
For unbranded you'll want to look for G930U firmware.
For best compatibility you flash all 4 files using (AP,BL,CP,CSC) this will wipe the phone clean. Otherwise you can try Home_CSC instead of CSC (So AP, BL, CP, Home_CSC) , which keeps your data but may not fully resolve your issues.
Click to expand...
Click to collapse
What beanvee has said but I think it's worth mentioning I find Sam Firm tool pretty straight forward to use and you'll always get the firmware in separate parts which can be useful.
I found a link for the G930A here
I'm not really understanding the differences in firmware. How is flashing with this firmware
any different than what's on the phone right now?
I am just trying to get the wifi calling to work, How is flashing it with at&t version firmware going
to help me on the tmobile network.
I guess I don't know what I need, stock, unbranded, official or custom rom.
I checked all sites listed and there is no firmware for the J727a, alternative?
I would rather someone more knowledgeable guess what I need to do, if that is what is
necessary because the phones are no good to me without that feature. Any suggestions
would be appreciated.
Each carrier deploys their own CSC file, which contains carrier specific configurations, and its this file that determines if VoLTE or VoWIFI is enabled and how it connects.
AT&T may have different VoWIFI settings to TMobile, which is why using AT&T firmware it doesn't work. Some carriers outright disable it since they don't offer it.
Your best bet would be G930T firmware https://updato.com/firmware-archive-select-model?q=SM-G930T&rpp=15&order=date&dir=desc&exact=1
However unbranded G930U should also work because the unbranded firmware is meant to work on all cariers. G930A would likely get you no where since it'll be AT&T specific
The phones in the USA are all identical hardware under the hood, the only difference is the carrier branding and firmware.
But that's only for the S7, I'm not familiar with the J7.
And it's not through lack of knowledge @JohnAtlas, US phones are a nightmare to do anything with. There are several options available but it's difficult to explain what to do and how to do if you are not familiar with how the software works.
There are many guides on how to unlock the software on all US networks, and depending on the network can include multiple steps to complete, you just have to search and read.
Ok, I was able to find the latest firmware for the G930 phone
I installed odin and have the files, BL, AP, CP, and CSC or Home CSC
My question is, Do I load all files and then start or do one file at a time in odin
I tried all files the first time and got failed error and dismatch
Thanks
JohnAtlas said:
Ok, I was able to find the latest firmware for the G930 phone
I installed odin and have the files, BL, AP, CP, and CSC or Home CSC
My question is, Do I load all files and then start or do one file at a time in odin
I tried all files the first time and got failed error and dismatch
Thanks
Click to expand...
Click to collapse
All files in correct slots and use this Odin https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Put all files in and used patched odin via link
Received fail and screen that said, "An error has occurred while updating the device software"
After reading more, tried to install twrp and received secure check fail : recovery
Rebooted phone and this is the screen right now, not sure what to do next
Thanks
https://drive.google.com/file/d/1QRvaTNb067u49lW1s4UZdRZivK936C2Y/view?usp=sharing
JohnAtlas said:
Put all files in and used patched odin via link
Received fail and screen that said, "An error has occurred while updating the device software"
After reading more, tried to install twrp and received secure check fail : recovery
Rebooted phone and this is the screen right now, not sure what to do next
Thanks
https://drive.google.com/file/d/1QRvaTNb067u49lW1s4UZdRZivK936C2Y/view?usp=sharing
Click to expand...
Click to collapse
That is the system recovery and when you flash with Odin you need to put your phone in download mode first press volume down+home+power. The phone should not go to that screen you have posted either before or after Odin, its a completely different recovery mode.
Get your firmware from updato. Com or sammobile
G930U, filter by USA and choose the latest XAA or USC and use the modified version of Odin. We know this works because thousands of people have used it to do what you are trying to do.
Thanks for info, I used G930U TMK version since we are on Tmobile carrier
It seems to be working fine and wifi calling is available
There is no TMK version for the J727U but will try the XAA for the other phone
The way I understand it is that the U means unlocked and the XAA is generic and not carrier specific
Please advise if I'm not on the right track
Thanks for your help
JohnAtlas said:
Thanks for info, I used G930U TMK version since we are on Tmobile carrier
It seems to be working fine and wifi calling is available
There is no TMK version for the J727U but will try the XAA for the other phone
The way I understand it is that the U means unlocked and the XAA is generic and not carrier specific
Please advise if I'm not on the right track
Thanks for your help
Click to expand...
Click to collapse
That's brilliant , glad your up and running.
So the letter "U"after the "G930" denotes the region of the world the device is build to operate in, the Americas just happens to be U. The unbranded firmware is the one that has a region but no network assigned to it, so a 3 letter code is used instead, in your case its USC, or XAA.
Europe is G930"F" or "FD" and the 3 letter code for unbranded is BTU & XEA.
Anyway if your phone is running great on T Mobile then don't update it anymore, turn auto update off. The advantage of keeping it T Mobile is you have the wifi calling, the unbranded firmware needs more fiddling around with the get the wifi calling working on the network your using, so best to stick with what works.
I will have a look for firmware for the J7 you have to see if i can recommend doing something with it to get the wifi calling working.
*update*
So it seems the J727 is the same as the J7 in terms of the internal components, everything is the same in both models so that's great news. I think the "27" bit is just a marketing thing.
In theory you should be able to flash the latest T Mobile Oreo to your device from this link https://www.sammobile.com/firmwares/galaxy-j7-pop/SM-J727T/TMB/download/J727TUVS4BRK1/249137/
Now before we start please check / do the following to avoid further problems.
1. Save everything you need from the phone to your pc.
2. Check that you have OEM unlocked in "developer settings" and "USB debug" enabled.
3. developer setting menu is, settings>about phone>software and information>build number>tap 7 or 8 times, developer menu should now appear. (Sometimes it's somewhere else but build number is what you want to find and tap on 7-8 times).
4. To avoid any issues with device FRP lock, delete your google account off the phone., settings>accounts>google. delete it. When successfully flashed you just add the account again when the phone starts for the first time by signing in.
5. Use the same version of Odin you used to flash your S7.
you can also use updato.com (i think it's slightly faster than sammobile.)
Let me know how you get on.
Remember J727T (TMB) is the firmware you want.
Hello,
I bought an S7 from eBay, it was marked as a "new" and "UK" phone. I factory reset the device on receipt and apparently worked fine to start with. However, there have been a few problems (poor signal, battery life, echoes in video calls) and I noticed the device was still on Android 6, so wondered if an update to Android 8 might help (?).
There is no menu option available to update Android so I started looking into flashing firmware. On further digging, the device seemed an official SM-G930F but "United Arab Emirates" appears in the "About Phone" section.
I downloaded some stock firmware (Android 8, UK Vodafone which is the network I expect to run it on) and tried flashing with Odin 3.13 and it failed with error "unsupport dev_type" on the phone screen. Any suggestions?
I also noticed that in "Download mode" the phone said it was a "SM-G930V". I wondered if this was why the flash had failed. For the SM-G930V I only seem to be able to get USA/Verizon stock firmware. Might this work or would I have trouble using this in the UK?
Any help would be much appreciated. I'm a newbie in this area so apologies if any of these questions are answered elsewhere.
Many thanks,
Edwin
ecc25 said:
Hello,
I bought an S7 from eBay, it was marked as a "new" and "UK" phone. I factory reset the device on receipt and apparently worked fine to start with. However, there have been a few problems (poor signal, battery life, echoes in video calls) and I noticed the device was still on Android 6, so wondered if an update to Android 8 might help (?).
There is no menu option available to update Android so I started looking into flashing firmware. On further digging, the device seemed an official SM-G930F but "United Arab Emirates" appears in the "About Phone" section.
I downloaded some stock firmware (Android 8, UK Vodafone which is the network I expect to run it on) and tried flashing with Odin 3.13 and it failed with error "unsupport dev_type" on the phone screen. Any suggestions?
I also noticed that in "Download mode" the phone said it was a "SM-G930V". I wondered if this was why the flash had failed. For the SM-G930V I only seem to be able to get USA/Verizon stock firmware. Might this work or would I have trouble using this in the UK?
Any help would be much appreciated. I'm a newbie in this area so apologies if any of these questions are answered elsewhere.
Many thanks,
Edwin
Click to expand...
Click to collapse
Go to the play store and install Sam phone info, then look at what chipset it lists, you don't want it to be Qualcomm Snapdragon, Eyxnos is what you want to see.
G930V is US Verizon firmware
Report back please.
cooltt said:
Go to the play store and install Sam phone info, then look at what chipset it lists, you don't want it to be Qualcomm Snapdragon, Eyxnos is what you want to see.
G930V is US Verizon firmware
Report back please.
Click to expand...
Click to collapse
Thanks for your reply! The "hardware/board" is "qcom/msm8996". Where does that leave me?
I noticed that the Bootloader & Baseband Versions begin G930VVRU but the PDA and CSC versions begin G930FXXU. Not sure if that means anything.
Thank you!
ecc25 said:
Thanks for your reply! The "hardware/board" is "qcom/msm8996". Where does that leave me?
I noticed that the Bootloader & Baseband Versions begin G930VVRU but the PDA and CSC versions begin G930FXXU. Not sure if that means anything.
Thank you!
Click to expand...
Click to collapse
Well the person who sold it to you is a liar for starters, it's not a "brand new UK device", it's a US S7 (G930V) Originally bought for the Verizon Network in the states. They are difficult to do anything with as the Qualcomm boot loader is locked down.
So your first option is to update the firmware to the latest Verizon Oreo, probably not worth it since that firmware is designed to work on a couple of frequencies only.
Next option is to flash unbranded US firmware with a modified version of Odin that ignores mismatch devices etc and just installs the firmware. You will need to use this version of Odin from this thread >>> here Odin 13 PatchD.zip is the one you want.
Unzip, run Odin, place phone into download mode flash firmware. You will need to download G930U from Sammobile or undato.com The 3 letter code should either be USC or XAA.
Any questions please ask.
Also before flashing please remove you google account off the phone.
cooltt said:
Well the person who sold it to you is a liar for starters, it's not a "brand new UK device", it's a US S7 (G930V) Originally bought for the Verizon Network in the states. They are difficult to do anything with as the Qualcomm boot loader is locked down.
So your first option is to update the firmware to the latest Verizon Oreo, probably not worth it since that firmware is designed to work on a couple of frequencies only.
Next option is to flash unbranded US firmware with a modified version of Odin that ignores mismatch devices etc and just installs the firmware. You will need to use this version of Odin from this thread >>> here Odin 13 PatchD.zip is the one you want.
Unzip, run Odin, place phone into download mode flash firmware. You will need to download G930U from Sammobile or undato.com The 3 letter code should either be USC or XAA.
Any questions please ask.
Also before flashing please remove you google account off the phone.
Click to expand...
Click to collapse
Thank you for these detailed instructions -- much appreciated!
Presumably using this version of Odin carries a high risk of bricking the phone if I get anything wrong?
Out of interest, what's the reason for removing the Google account?
Cheers,
Edwin
ecc25 said:
Thank you for these detailed instructions -- much appreciated!
Presumably using this version of Odin carries a high risk of bricking the phone if I get anything wrong?
Out of interest, what's the reason for removing the Google account?
Cheers,
Edwin
Click to expand...
Click to collapse
Because it's a further complication with FRP lock you just don't need after flashing. Just add the google account after flashing and your good to go.
With regards to flashing yes there's always a risk that something can go wrong, that's why you take your time and follow the steps exactly. In your case it's pretty straight forward and remember nothing changes on the external SD card, so anything you want to keep can be moved there before flash.
I would also mention that theoretically you could flash UK unbranded (BTU) but it's for G930F Exynos devices so best at this stage just get the device on unbranded Qualcomm and working on UK networks.
let me know how it goes.
cooltt said:
Because it's a further complication with FRP lock you just don't need after flashing. Just add the google account after flashing and your good to go.
With regards to flashing yes there's always a risk that something can go wrong, that's why you take your time and follow the steps exactly. In your case it's pretty straight forward and remember nothing changes on the external SD card, so anything you want to keep can be moved there before flash.
I would also mention that theoretically you could flash UK unbranded (BTU) but it's for G930F Exynos devices so best at this stage just get the device on unbranded Qualcomm and working on UK networks.
let me know how it goes.
Click to expand...
Click to collapse
Hello,
I've just tried doing what you suggested (I think!) and I got a failure. Odin said "FAIL! (Auth)" and the phone said "Secure check fail: apnhlos". I tried rebooting and got a security error. So I tried Odin again and it passed.
However, now the phone won't boot, it alternates between "Samsung Galaxy S7" and a blank screen. In recovery I get:
"#fail to open recovery_cause(No such file or directory)#"
#Reboot Recovery Cause is [UNKNOWN]#
No Support SINGLE-SKU
File-Based OTA
Supported API: 3
dm-verity verification failed..."
Any ideas?
Thanks a lot,
Edwin
ecc25 said:
Hello,
I've just tried doing what you suggested (I think!) and I got a failure. Odin said "FAIL! (Auth)" and the phone said "Secure check fail: apnhlos". I tried rebooting and got a security error. So I tried Odin again and it passed.
However, now the phone won't boot, it alternates between "Samsung Galaxy S7" and a blank screen. In recovery I get:
"#fail to open recovery_cause(No such file or directory)#"
#Reboot Recovery Cause is [UNKNOWN]#
No Support SINGLE-SKU
File-Based OTA
Supported API: 3
dm-verity verification failed..."
Any ideas?
Thanks a lot,
Edwin
Click to expand...
Click to collapse
Ok, so try an earlier G930V firmware and please make sure you are placing the file in the right places with Odin. The US carriers have all updated their firmware and often closes the loophole which allows the patched Odin to work. Then it's just a question of waiting until someone develops a workaround again.
Also you can pick up an S7 from ebay for about £100 now, your always going to have problems with a qualcomm device on UK networks. Where about are you in the UK?
cooltt said:
Ok, so try an earlier G930V firmware and please make sure you are placing the file in the right places with Odin. The US carriers have all updated their firmware and often closes the loophole which allows the patched Odin to work. Then it's just a question of waiting until someone develops a workaround again.
Also you can pick up an S7 from ebay for about £100 now, your always going to have problems with a qualcomm device on UK networks. Where about are you in the UK?
Click to expand...
Click to collapse
Thanks! Actually shortly after posting I found a suggesting of using CSC not HOME_CSC, which enabled the flash to work (at the expense of phone data, as expected).
The device still does have a few issues though, as you predicted. Is the radio hardware different for Qualcomm? Might need to buy another then. Any advice to avoid being scammed on eBay again?!
Thanks so much!
ecc25 said:
Thanks! Actually shortly after posting I found a suggesting of using CSC not HOME_CSC, which enabled the flash to work (at the expense of phone data, as expected).
The device still does have a few issues though, as you predicted. Is the radio hardware different for Qualcomm? Might need to buy another then. Any advice to avoid being scammed on eBay again?!
Thanks so much!
Click to expand...
Click to collapse
Well you could flash G930U which opens up all of the radios for the US and you may have less issues but US and European devices have different chips so your never going to be able to flash any EU generic firmware. I'm addition the US and Europe are different cellular regions with different operating frequencies. You can get by with what you have but never get full functionality.
I think you were just unlucky with this phone on ebay, there are plenty which are genuine EU region devices.