CyanogenMod 10.1 for GT-7580 & GT-S7582
Installation
Download the ROM from the link below
Put the zip files on your SDCard
Reboot on Recovery
Wipe Data / Factory Reset
Select "Install the Zip from External Storage"
Choose CM zip file
Reboot to system
Enjoy!
Credits
ME and Cyanogen Team
Version Information
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Brain
Hit thanks if you like my work
Android One ToolKit
This Program will help you to Unlock/Relock your phone and then Install latest TWRP 2.8.6.0 in your phone. :laugh:
If you want to Unlock your device and Install Custom Recovery
1. Open .EXE file and then install it
2.Open Android One Toolkit.bat follow the Instructions and Make Your phone ready
If you Want to Lock/Relock your phone run lock.bat
1.Open the installed folder and run Lock.bat
2.Follow the Instruction to Unlock your phone safely
Download the file and enjoy this is still in Testing Stage so if any bugs or any errors occurred pls report
In next version there will be a file to install root access in your phone
Download File Link
https://www.androidfilehost.com/?fid=24369303960685956
This Software is still is testing mode so any bugs pls report.
Whats Working:
Everything
Whats Not Working:
You should say
XDA:DevDB Information
Android One ToolKit , Tool/Utility for the Android General
Contributors
MICKEY_ANDRO100
Version Information
Status: Testing
Current Stable Version: v1.0.0
Created 2016-01-16
Last Updated 2016-01-15
Hi. The Symphony H50 custom rom ported by Miui 7.1.
1. Root your phone.
2. Need recovery of TWRP. (if not available download: http://*******/1aHo9z or http://filesrightnow.com/file/0579x72)
3. Download custom rom from http://*******/1aHlAK or https://drive.google.com/file/d/0B_W9Vs6WyGMuMlJSSTJaempSa3M/view?usp=sharing
4. unzip by 7zip. password http://filesquick.net/file/0579J85
5. Zip all files and send to SD card or phone memory (if TWRP not recognize SD card)
4. Wipe all and install it by TWRP recovery.
5. restart phone and
enjoy.
XDA:DevDB Information
Miui 7.1 ported for Symphony H50)
Contributors
salahuddin85
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2016-05-15
Last Updated 2016-05-15
Download Link
Please direct link give me
Please give direct link
Please provide direct download link
salahuddin85 said:
Hi. The Symphony H50 custom rom ported by Miui 7.1.
1. Root your phone.
2. Need recovery of TWRP. (if not available download: http://*******/1aHo9z or http://filesrightnow.com/file/0579x72)
3. Download custom rom from http://*******/1aHlAK or https://drive.google.com/file/d/0B_W9Vs6WyGMuMlJSSTJaempSa3M/view?usp=sharing
4. unzip by 7zip. password http://filesquick.net/file/0579J85
5. Zip all files and send to SD card or phone memory (if TWRP not recognize SD card)
4. Wipe all and install it by TWRP recovery.
5. restart phone and
enjoy.
XDA:DevDB Information
Miui 7.1 ported for Symphony H50)
Contributors
salahuddin85
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2016-05-15
Last Updated 2016-05-15
Click to expand...
Click to collapse
Bro Download link not working plz give me other link
TWRP 3.0.3 Recovery ProjectDisclaimer
Disclaimer
#include
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
ChangeLog For 3.0.3
Fixed issue with ext4 (Formatting in ext4 no longer takes a life.)
build ramdisk on LZMA
Builded DT on lz4c
Improve backup display names with emulated storage
Fix crash during check for TWRP app
Fill uid/gid for screenshots at compile time
Allow custom bootloader msg offset in block misc
ScreenShots
Click Here
Installation Instructions:silly:
By PC
What’s required:
USB Cable / PC
SP Flash Tool or MTK Flash Tool
ADB VCOM Drivers (normally I use PDAnet)
Scatter file for your phone
recovery.img
Click to expand...
Click to collapse
What to do:
Download and install the drivers
Download, extract and run SP Flash Tool
Click scatter loading on right side of SP Flash Tool and direct SPFT to where your scatter file is
Uncheck everything except for recovery
In the list of images in SPFT, click the recovery line and direct it to where your TWRP is saved
Click download at the top of SPFT
You’ll see a warning pop up letting you know that not all items are selected. Just click okay.
Remove the battery from your phone for a second and replace
Attach phone to PC via USB – At this point in the bottom of SPFT, you will see the preloader communicating with the PC. The bar at the bottom of SPFT may flash a couple of different colors, then you’ll see a green circle indicating it’s finished successfully.
Detach the phone
Boot into recovery by holding volUp + volDown+power and then hold volUP to boot into recovery
By Mobile
Download the recovery in phone or move it to phone.
Download Flashify (mobile uncle tool should work too, rename the TWRP.img to recovery.img and place it in sdcard root)
Open flashify and follow the screenshots.
Go To Flash Tap And Select Recovery Image
Select - Choose a file , Download the recovery.img and select this recovery from your dir
Tap on Yes and after successful recovery flash , reboot and enjoy
By Custom Recovery (CTR OR TWRP or CWM)
Download Recovery Flashable TWRP from the given link ... Flash It and then reboot to recovery
Bugs :- The Recovery Is Inverted As Our device Is Inverted ... Will be fixed soon
Download Links (Choose Carefully)
TWRP 3.0.3 - SP TOOL FLASHABLE AND FLASHIFY : Click Here - (9mb)
TWRP 3.0.3 - CUSTOM RECOVERY FLASHABLE : Click Here
Credits
Allah SWT
Vojtěch Hejsek for build from source
TeamWin
Dees Troy
Omni
LPAD
AMD Families
You & Me
HIT THANKS IT WLL NOT COST YOU !!!
XDA:DevDB Information
TWRP 3.0.3 For Micromax Unite 2, Tool/Utility for the Micromax A106 Unite 2
Contributors
manjot.gni, charansai, Ayush Rathore, Teamwin
Source Code: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Version Information
Status: Stable
Current Stable Version: 3.0.3
Stable Release Date: 2017-02-23
Created 2017-02-26
Last Updated 2017-02-26
Will this work to flash resurrection remix MM?
---------- Post added at 01:13 PM ---------- Previous post was at 12:50 PM ----------
its not flashing through flashify it gives error and yes i have rooted stock rom
---------- Post added at 01:22 PM ---------- Previous post was at 01:13 PM ----------
not flashing through mobile uncle tools also
Hey bro send me a link
Peter pan7034779691]I am kinda new to xda.... And therefore I don't know much about modding android.... But I have flashed many ROMs in my device (MMX u3) and also in some huawei devices ... ....
I have noticed that MMX u2 has many ROMs... Whereas its successor, MMX u3 don't have much.. . so. Can u plz guide me to port resurrection remix 5.6.7 for using in my micromax unite 3
THANKS IN ADVANCE
manjot.gni said:
TWRP 3.0.3 Recovery ProjectDisclaimer
ChangeLog For 3.0.3
Fixed issue with ext4 (Formatting in ext4 no longer takes a life.)
build ramdisk on LZMA
Builded DT on lz4c
Improve backup display names with emulated storage
Fix crash during check for TWRP app
Fill uid/gid for screenshots at compile time
Allow custom bootloader msg offset in block misc
ScreenShots
Click Here
Installation Instructions:silly:
By PC
What’s required:
What to do:
Download and install the drivers
Download, extract and run SP Flash Tool
Click scatter loading on right side of SP Flash Tool and direct SPFT to where your scatter file is
Uncheck everything except for recovery
In the list of images in SPFT, click the recovery line and direct it to where your TWRP is saved
Click download at the top of SPFT
You’ll see a warning pop up letting you know that not all items are selected. Just click okay.
Remove the battery from your phone for a second and replace
Attach phone to PC via USB – At this point in the bottom of SPFT, you will see the preloader communicating with the PC. The bar at the bottom of SPFT may flash a couple of different colors, then you’ll see a green circle indicating it’s finished successfully.
Detach the phone
Boot into recovery by holding volUp + volDown+power and then hold volUP to boot into recovery
By Mobile
Download the recovery in phone or move it to phone.
Download Flashify (mobile uncle tool should work too, rename the TWRP.img to recovery.img and place it in sdcard root)
Open flashify and follow the screenshots.
Go To Flash Tap And Select Recovery Image
Select - Choose a file , Download the recovery.img and select this recovery from your dir
Tap on Yes and after successful recovery flash , reboot and enjoy
By Custom Recovery (CTR OR TWRP or CWM)
Download Recovery Flashable TWRP from the given link ... Flash It and then reboot to recovery
Bugs :- The Recovery Is Inverted As Our device Is Inverted ... Will be fixed soon
Download Links (Choose Carefully)
TWRP 3.0.3 - SP TOOL FLASHABLE AND FLASHIFY : Click Here - (9mb)
TWRP 3.0.3 - CUSTOM RECOVERY FLASHABLE : Click Here
Credits
Allah SWT
Vojtěch Hejsek for build from source
TeamWin
Dees Troy
Omni
LPAD
AMD Families
You & Me
HIT THANKS IT WLL NOT COST YOU !!!
XDA:DevDB Information
TWRP 3.0.3 For Micromax Unite 2, Tool/Utility for the Micromax A106 Unite 2
Contributors
manjot.gni, charansai, Ayush Rathore, Teamwin
Source Code: https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Version Information
Status: Stable
Current Stable Version: 3.0.3
Stable Release Date: 2017-02-23
Created 2017-02-26
Last Updated 2017-02-26
Click to expand...
Click to collapse
I flashed it, but now my screen goes black when I go into recovery mode
Opens original recovery please help !!!
Hey everyone,
During the initial versions of LineageOS, I wasn't been able to install it due to error:7 (Baseband error).
Now, I have tried a method that worked on my yu Yunique device.
This method can be used for any other device also but you have to find corresponding ROM file and other stuffs for your device only.
**Remember to take a full backup before experimenting with your device**
Procedure:
You need following things before you start-
1. LineageOS rom file: https://download.lineageos.org/jalebi
2. Open Gapps: http://opengapps.org (choose platform=ARM, android=7.1 and variant of your choice)
3.Caesium kernel: https://transfer.sh/Yqhm8/Caesium-jalebi-20170701-140319-v2.1.zip
4:LineageOS root file:https://download.lineageos.org/extras (Name: su(arm), version:14.1)
5. Firmware File: https://www.androidfilehost.com/?fid=673368273298934200
NOTE **There are some times that this method won't work in the latest TWRP i.e 3.0.3-0. So, revert back to TWRP 2.8.7.0 and then try the given method.**
Method:
1. After taking a backup of your previous working ROM, wipe off the Dalvik cache + system + cache + data in the recovery.
2. Flash the firmware image.( This solves the baseband error problem)
3. Flash the lineageOS rom file.
4. Now flash the caesium kernel( prevents bootloop)
5. after flashing all 3 files, reboot into system.
The first bootup will take about 2-3 minute(can go upto 5-7 min also). so have patience.
This worked for me. If it also works for you too, then please tell.
Also, you can watch my youtube video for the same:https://youtu.be/nYOsDeG5Kfs
Thank you
NOTE**All the file provided above belongs to their corresponding developers. I am just sharing it for help**
helpful guide
You can also solve this prob by delete baseband line in updater script
Helpful !!!!