HI, i've a Huawei mat 8 buyed via aliexpress web site ( from china basically ) i cannot receive or make a call but it seem that i can detect gsm rogers operators with my sim card here in Quebec, receiving sms or sending is correctly work but only with calls, i've tried to disable 3g or LTE data mobile but no go, the phone is under android 6.0 ,another sim card make the same issue but this last is correctly worked on another phone, does anyone have an idea or solution please ?
thank you.
khomriimad said:
HI, i've a Huawei mat 8 buyed via aliexpress web site ( from china basically ) i cannot receive or make a call but it seem that i can detect gsm rogers operators with my sim card here in Quebec, receiving sms or sending is correctly work but only with calls, i've tried to disable 3g or LTE data mobile but no go, the phone is under android 6.0 ,another sim card make the same issue but this last is correctly worked on another phone, does anyone have an idea or solution please ?
thank you.
Click to expand...
Click to collapse
Anyone can answer please ? thanks.
Related
Hi boys and girls!
I have a quite hugh problem. I've just bought a chinese phone, a Miphone m88+ with Windows Mobile 6.
The phone works great, exept for one BIG thing.. I can't call =)
Let me describe the problem. I put in the SIM card in the phone, enter the pin code and the phone (most of the times) get a good signal strength and my provider shows up in the Today page. So far so good....
Now I'm trying to dial a number. It's dialing and dialing and after a short while three beeps turns up and the call ended with no success. I still have a good signal strength and it's looks like the phone has registred on the GSM system but I'm unavailable to call. Now I did a big NO NO and tried to call 112 (the european 911) and that works great! Okey, nothing wrong with the phone then.
Then I tried to reflash the phone with the ROM from this forum. The flashing went good. Back with the SIM card, perfekt signal but still no way to call. Off with the phone, on with the phone and off again and then it started to cooperate with me! The phone worked, the SMS worked! Happy! For an hour it worked perfectly and then i rebooted the device and then the phone went back to square one... BEEP BEEP BEEP...
I was thinking it might have been IMEI blocked for some reason and I have spend the last 24h to look for a IMEI changing software on the net and found a lot of them but noone works with my phone. And then again, after like 200 reboots during the IMEI tries, I could make a call, but just one and then back to null again.
My conclusion:
It's nothing wrong with the phones hardware due to I can make emergency calls.
The IMEI isn't blocked due to I can (sometimes 1 out of 100) make a call and send SMS AND I allways got my provider and a good signal strength.
I think it could/would/might be a configuration issue that Windows Mobile doesnt register to my provider.
What in the h*lls name could it be?! Any tips or hint from you guys?! Can it be the software dialer in the phone that don't like my provider?
Maybe any settings to change somewhere in the phone.. Timeouts.. ?
Is there a IMEI changing software for my phone so I can try to change it? (And NO it's not a ciminal act to do that in Sweden =) )
Please please help me!
Phone: Miphone m88+
OS: Windows Mobile 6 (Build 18165.0.5.0)
Processor: ARM926T OMAP850
Service provider: Tele2/Comviq, Sweden
SIM locked? And mount random ROM without brick the device... you are a lucky boy ^^ try with Sim of another Carrier.
D'rath
Okey...
Here's the deal...
Now I have been tried out another carrier (Telia) on the phone and the phone works perfectly. =)
Now to the problem. The Miphone don't have 3G (none of the chinese phone does)
The Tele2 SIM card is a newer card with access to both 2G and 3G network here in Sweden and the Telia card is a older card with only access to 2G.
I can use my new Tele2 card in older (2G) "normal" phones and then the card/phone just connect to 2G. But in this phone it looks like it won't work at all. Is there any settings i can change exept putting the phone on manual network selection?
I really need to use my Tele2 carrier and you can't order a old SIM card with only 2G access from the carrier =)
What to do? =)
Regards
mjuff
I'm facing a strange problem,
It is NOT possible to make any outgoing calls when the phone is on 3G network.
However incoming calls, SMS send/receive and Internet Connection are working well when I'm on 3G network.
Both outgoing and incoming calls are I switch over to 2G/GSM network.
Phone Details are given below:
Manufacturer: LG
Model: -P940
OS Version: Android 2.3.7
Baseband: LG L6260_MODEM_SIC_01.1138.00
S/W: LGP940AT-00-V10n-EUR-XXX-MAR-06-2012
Other Observations:
When I tried the SIM Card of another Telecom company, both outgoing and incoming calls are possible on both 3G and 2G/GSM network.
Tried updating software by OTA and LG update tool, but it says I have the latest software and no update required.
My question is:
Will the baseband of the phone change if I upgrade to ICS?? and is there any chance that it will solve my problem?
PLEASE HELP!!!!!!!
Hey there!
2G and 3G are seperate enteties broadcasted seperately by your network provider. This could just mean that your local provider's 3G network is not strong/not working in your area. It could be the baseband but the simplest answer is often the most likely.
Sorry about that
Carl.
XperFD said:
Last week I purchased an LG Prada 3.0 from UK and am using it in Middle East. I'm facing a strange problem,
It is NOT possible to make any outgoing calls when the phone is on 3G network.
However incoming calls, SMS send/receive and Internet Connection are working well when I'm on 3G network.
Both outgoing and incoming calls are I switch over to 2G/GSM network.
Phone Details are given below:
Manufacturer: LG
Model: -P940
OS Version: Android 2.3.7
Baseband: LG L6260_MODEM_SIC_01.1138.00
S/W: LGP940AT-00-V10n-EUR-XXX-MAR-06-2012
Other Observations:
When I tried the SIM Card of another Telecom company, both outgoing and incoming calls are possible on both 3G and 2G/GSM network.
Tried updating software by OTA and LG update tool, but it says I have the latest software and no update required.
My questions are:
Is it due to the baseband in the UK version phone not matching with my local Telecom Network??
Will the baseband of the phone change if I upgrade to ICS?? and is there any chance that it will solve my problem?
PLEASE HELP!!!!!!!
Click to expand...
Click to collapse
carlsanderson1986 said:
Hey there!
2G and 3G are seperate enteties broadcasted seperately by your network provider. This could just mean that your local provider's 3G network is not strong/not working in your area. It could be the baseband but the simplest answer is often the most likely.
Sorry about that
Carl.
Click to expand...
Click to collapse
Hi Carl,
Thanks for the reply. However, please note that I've tried placing calls on 3G at different parts of the country but it fails every where. Moreover the same SIM card works fine with my Xperia and Huawei phones on 3G. So I'm totally confused.
Have you tried doing a standard device update using the support tool? see if LG have a baseband that corrolates with your location
XperFD said:
Hi Carl,
Thanks for the reply. However, please note that I've tried placing calls on 3G at different parts of the country but it fails every where. Moreover the same SIM card works fine with my Xperia and Huawei phones on 3G. So I'm totally confused.
Click to expand...
Click to collapse
carlsanderson1986 said:
Have you tried doing a standard device update using the support tool? see if LG have a baseband that corrolates with your location
Click to expand...
Click to collapse
Yes, My ROM was V10N, first I tried updating with LG Tool standard method but the tool didn't update the SW saying that I have the latest version & no update required. Then I downloaded a V10B ROM and loaded manually using KDZ tool, but my problem persisted. Then I tried online update again and this time it worked updating my ROM back to V10N, but it didn't solve the problem. Today I did KDZ update to ICS but still facing my original problem.
HI THERE
Actually i bought a Motorola XOOM 2 ,MZ616 , every thing is ok, Android 4 already down but my question is how to active the phone conversation , It has sim card but i wanted to use the sim for telephone conversation if possible . who can help me?
Thanks
You can't. The sim card is for 3G and GPRS data connections only. No SMS, MMS or dialing is possible.
Hi there,
I got a European version of Lenovo Yoga tab 3 android tablet (YT3-X50L). The Y3-X50L version compared to YT3-X50M version, does not have a phone call app and it meant to be restricted for surfing only even though it has a sim card slot.
I have changed its firmware to YT3-X50M to be able to use it as a normal phone. Here is the problem:
the phone can send and receive sms through the cell network but using it to phone call, the calls get disconnected immediately after dialling and no phone call comes in either.
It seems to me that there should be a way to activate/unlock the phone ability. Any help is appreciated.
amirbekam said:
Hi there,
I got a European version of Lenovo Yoga tab 3 android tablet (YT3-X50L). The Y3-X50L version compared to YT3-X50M version, does not have a phone call app and it meant to be restricted for surfing only even though it has a sim card slot.
I have changed its firmware to YT3-X50M to be able to use it as a normal phone. Here is the problem:
the phone can send and receive sms through the cell network but using it to phone call, the calls get disconnected immediately after dialling and no phone call comes in either.
It seems to me that there should be a way to activate/unlock the phone ability. Any help is appreciated.
Click to expand...
Click to collapse
AMIRBEKAM,
I've got a similar YT3-850L, with SIM slot intended for DATA, not PHONE. I'd wondered what would happen if I flashed with the "M" ROM. You SEEM to have answered that question. BUT, may I ask you a few questions, please?
1) Is your tablet ROOTED?
2) If YES, was that before or after the "M" ROM was flashed, or both?
3) Is your SIM card ACCOUNT VOICE as well as DATA ENABLED with your CARRIER? (In the US, at least, DATA and VOICE/DATA SIM cards are NOT interchangeable. So, if that's the case with your carrier, that MIGHT be the problem, or part of it).
4) What approach did you use to flash the "M" ROM
5) Where did you GET the "M" ROM
I put my VOICE/DATA SIM card in my YT3-850L, and it didn't work for DATA. T-Mobile said it SHOULDN'T work with data on my tablet, as it requires a DATA ONLY SIM account for a DATA-ONLY tablet. They're shipping me a SIM card which they say will allow DATA ONLY on my "L" Yoga tablet. We'll see you THAT works.
THANKS!
I have got yoga tap 3 8 and I m not getting phone call neither I am able to call calls get disconnect as soon as I dialed the number
Hi
Its been 1 year i am using ownice k6 but i am not able to use lte service.
I put the sim in the slot but no network it only shows emergency call only.
Kindly help me with this.
Look inside here:
How to fix a cell phone that says Emergency Calls Only - Smart Mobile Phone Solutions
Has your Android cell phone started displaying Emergency Calls Only? Does your phone no longer have service? Can you no longer make or receive calls or
smartmobilephonesolutions.com
It's not cellphone, it's car Android system.
Have you had any luck with this. I'm having the same problem. It won't let me add an APN. And it's seems locked to China unicorn.
If I try search available network they are all forbidden
Maddowse01 said:
Have you had any luck with this. I'm having the same problem. It won't let me add an APN. And it's seems locked to China unicorn.
If I try search available network they are all forbidden
Click to expand...
Click to collapse
Hello
Same issue here, did you find a solution ?
Thanks