Hi,
After trying to downgrade my ASUS memo PAD ME70C (K01A) from Lollipop 5.0 to Kikat 4.4.2 via fastboot & ADB
I have to run wrong fastboot command and now my tablet has no access to the bootloader or recovery ...
I press the button volume + with the power button, only the logo of the USB symbol appears in the middle of the screen.
I no longer have access to the Device via the fastboot commands.
Thank you for your help to get me out of this dead end.
Related
I need a little help my device is stuck in apx mode (blank screen with power led on) i have uid (cpuid) and sbk i have read a lot fom this forum and have all the tool to root, flash, load.. But my main problem is that when i reset my acer a500 and the usb is attached the windows 7 recognizes the driver and (sound pops up) and the driver (acer picasso usb boot recovery driver) is there but no tool e.g apxtool or fastflash or ics rooting nothing works or regocznies the device coz when i press any option or press the key to continue the drive drops and vanishes from the window usb list in device manager and i have to manually reset acer again to get the driver back but still no use as command prompt tells me that no device is attached or found. Please help as this acer is my wifes gift to me and im trying hard to get it back its totally dead
Hello,
I own ZTE Maxi plus 5 device. It is a Android and Firefox OS device (also known as Unagi). I unwisely flashed geeksphone Firefox OS firmware. Now my phone is bricked, I'm trying to enter fastboot mode (via Volume Up + Powe button) but I only receive "waiting for device" message when running fastboot.exe. When I run adb.exe, device is not listed. I think that USB on device is not working - there is no message about driver installation in Windows, in Linux dmesg doesn't show any devices when connecting USB cable. Is i possible to enter fastboot and flash stock firmware? Recovery mode is also not working (i see only splash screen, same as in fastboot mode).
Thanks, best regards,
Bricked after firmware upgrade?
I have a Vido N101RK 10.1 inch Quad Core RK3188.
I upgraded the firmware with the RKbatchtool.
All went fine and it succeded.
But now, the tablet won't startup anymore. The screen keeps black.
What can I do?
P.S. I can run phone in download mode, but I don't have right mbn files. Seems that the phone model number is "P752TV".
dear sir;following an flash attempt of the recovery clockworck ,my tf300t is locked.when i start my tablet with the asus page
it s impossible to connect with adb this one is recognised with apx mode
how can i restore my tablet ?
thanks for your help.
driver adb +sdk +asus installed with my computer windows 7 x64
thanks !!!!
Bootloader not accessible
I think I have the same problem. I cannot access the bootloader with power on / volume down anymore after installing CWR. My TF300T always starts with the Asus screen until the battery gets empty.
Any chances to solve this issue?
help me, i have updated firmware for my device, ASUS FONEPAD 7 K012, but it was failed, and now, i can't access the droidboot or download mode, it just view a usb cable and off, please help me
Same problem here. I cant access fastboot also
Dear friends,
I have tried to root and install TWRP on my Iconia a1-840 (not FHD) but somehow i am stuck on SHELL> screen and it says
Press ESC in 1 seconds to skip startup.nsh any other key to continue.
Shell>
My iconia is with android 4.4.4 Kitkat,
I buy a keyboard and when i type exit, it turns me to bios, again whatever i change in bios when it start then show me again that SHELL
i tried to make a bootable usb with windows in it, but it doesn't load the usb
Please help me.
I need help with this too