Hello,
I own ZTE Maxi plus 5 device. It is a Android and Firefox OS device (also known as Unagi). I unwisely flashed geeksphone Firefox OS firmware. Now my phone is bricked, I'm trying to enter fastboot mode (via Volume Up + Powe button) but I only receive "waiting for device" message when running fastboot.exe. When I run adb.exe, device is not listed. I think that USB on device is not working - there is no message about driver installation in Windows, in Linux dmesg doesn't show any devices when connecting USB cable. Is i possible to enter fastboot and flash stock firmware? Recovery mode is also not working (i see only splash screen, same as in fastboot mode).
Thanks, best regards,
Bricked after firmware upgrade?
I have a Vido N101RK 10.1 inch Quad Core RK3188.
I upgraded the firmware with the RKbatchtool.
All went fine and it succeded.
But now, the tablet won't startup anymore. The screen keeps black.
What can I do?
P.S. I can run phone in download mode, but I don't have right mbn files. Seems that the phone model number is "P752TV".
Related
Hi guys,
I try to flash the Samsung Galaxy i5700 using fastboot for linux OS (I use ubuntu), but it can not detect and connect the phone after I press the buttons together volume-, green call and red call to enter the phone's fastboot mode.
I can connect the phone when it is in work mode (using android sdk).
So I think of its driver has some troubles, there is no driver before the phone go into android environment.
wondering would anybody help me find a way to fastboot it?
Regards
Tonytam
Samsung android phones need to be flashed trough Odin, this is only available on windows.
Most development is done at: forum.samdroid.net
I just inherited a US Verizon Xoom 4G LTE + WiFi that was apparently bricked a while back. It was running Android 4, but not 4.1 or 4.2. They weren't sure which exact version, just that it was pre 4.1. It was originally a 3G+WiFI and was sent in for the 4G LTE upgrade a while back. When you power it on, it stops at the Red M logo. I have no idea what was attempted before but hope someone here can help me at least get it back to stock. For reference, I am using a Windows 8 PC. I do have the Motorola drivers installed and the Android SDK installed to C:\SDK-Tools.
If I hold Volume Up and Power, it reboots and says "Starting RSD protocol support 3. Onewire: Charger is not connected or battery is not being charged... Battery charge Level: 100% (the charger is plugged in, btw). I have it connected to the pc via the oem usb cable. When I plug the cable in, windows recognizes the device and device manager shows and Motorola USB Device->Motorola Flash Device is connected. I installed RDS Lite v5.6.4 (also tried 5.7. Haven't found anything newer) and ran it as Adminitrator but it does not show anything in device properties when I click Show Device no matter which port I select. If I reboot (Power + Vol up) then immediately press Vol up when the Red M shows, it boots into fastboot mode (Starting Fastboot protocol support is displayed). If I run fastboot devices from the command line, the device and id is listed. So I know that windows can see it. ADB commands also appear to work when I let it boot normally and it sticks at the Red M.
Any idea why RSD Lite would not be able to connect to the device? I have downloaded this firmware - VZW_MZ602_signed_IMM76L_signed_vzw_MDM6600_03.1A.6 5_signed_usr_LTEDC_U_07.1F.00.combo.sbf\VZW_MZ602_ signed_IMM76L_signed_vzw_MDM6600_03.1A.65_signed_u sr_LTEDC_U_07.1F.00.combo.sbf in the hopes of restoring it with RSD Lite, but of course I cannot get it to connect.
My ultimate intention is to get some rom with at least android 4.1, possibly 4.2, installed so I can test some apps we use at work. Thanks in advance for any help.
Ok, so I figured this out. I did not realize RSD Lite would not work with USB 3.0 ports. That was all I had open on my computer so plugged in there. Unhooked another device, plugged into a USB 2.0 port in the device was instantly recognized. I was able to push the image and all booted back up fine, on Android 4.0.4.
Now I am off to find how to put CM 10.1 on here.....unless someone knows a simple way to do that
Hi everyone,
I have a turkish phone with the model Avea in touch 3 large, which is a ZTE Q blade maxi.
I'm facing a problem when i get into the bootloader mode, the computer doesn't detect the phone at all.
Can't use the fastboot... whenever i run: <fastboot devices> i get absolutely nothing
when the phone is on i can run : adb devices , but not fastboot devices
i believe it has to do with the phone drivers...
i used padnet to install the phone driver = MT65xx
can anybody help ???
thanks a lot
Hi all, really need your help. I tried to replace CWM with TWRP using RASHR. The result was that my tablet now won't go into recovery or go past the Samsung 10.1 boot screen. I can go into Download mode, but it doesn't want to connect to my computer. If I connect it to my mac and do "ADB Devices" it doesn't list the device and Heimdall won't find it either. If I connect it to my old PC, it simply pops up as "USB Device Not Recognised". I do have the correct drivers installed and I have connected to it in the past successfully on Download mode on both computers. I am wondering if USB Debugging is not selected on the tablet, but no way to boot to find out. I have tried multiple USB ports. Anyway, can anyone help me get my tablet back? Thanks so much.
BTW the Download screen says the following...
Code:
ODIN Mode
PRODUCT NAME: GT-P5110
CUSTOM BINARY DOWNLOADED: YES (1 counts)
CURRENT BINARY: CUSTOM
I was running CM 12 on it. Thanks again
Well I found my answer. With the tablet connected in download mode, I pressed the up and down buttons a few times and suddenly it went from not recognised to Samsung USB. Strange.
I was trying to unlock my phone's (Asus ZenFone Max Pro M2) bootloader using Unlock Batch using the guide here. When I booted into fastboot everything was fine but when I connected using USB and ran fastboot devices using my laptop, the phone's screen turned into a black screen saying 'press power key to shutdown' and fastboot identified the device as '????????'.
I have the usb drivers installed (both universal and asus's official) and have even tried uninstalling and reinstalling but still no progress. If the phone is booted, adb is able to detect the device normally.
RikSantra1119 said:
I was trying to unlock my phone's (Asus ZenFone Max Pro M2) bootloader using Unlock Batch using the guide here. When I booted into fastboot everything was fine but when I connected using USB and ran fastboot devices using my laptop, the phone's screen turned into a black screen saying 'press power key to shutdown' and fastboot identified the device as '????????'.
I have the usb drivers installed (both universal and asus's official) and have even tried uninstalling and reinstalling but still no progress. If the phone is booted, adb is able to detect the device normally.
Click to expand...
Click to collapse
I have the same problem..