Hey guys, I want to revert back to stock ROM. I already have the required files and I also have Odin on PC however there is a slight problem, the USB port on my galaxy s duos 2 has been damaged partially. The device can charge however when connected to a PC, it is not being detected.
In other words I can't install the stock ROM using Odin.
So, my question is:
Is there any other way to install the stock ROM and is there a stock ROM that can be flashed from recovery mode itself?
Any help is appreciated. Thank you.
Related
Hey.
I have a 4.1.2 running android phone Brand WANLTON PRIMO X1. Recently i have rooted and installed TWRP recovery mode, I was looking for a 4.2 update & installed a custom ROM as it stated 4.2 but it is was the same 4.1.2 modded ROM with some bugs, Unfortunately when I flashed the ROM I did not keep any backup but now I so badly want to go back to my original ROM. the link image attached
I have tried to do this according to instruction but it can't detect my phone when connected with USB.
Plz Plz provide me solution for this issue, I will be very very grateful to you.
Thanks in advance.
apparently tiveloru
ajoy25 said:
Hey.
I have a 4.1.2 running android phone Brand WANLTON PRIMO X1. Recently i have rooted and installed TWRP recovery mode, I was looking for a 4.2 update & installed a custom ROM as it stated 4.2 but it is was the same 4.1.2 modded ROM with some bugs, Unfortunately when I flashed the ROM I did not keep any backup but now I so badly want to go back to my original ROM. the link image attached
I have tried to do this according to instruction but it can't detect my phone when connected with USB.
Plz Plz provide me solution for this issue, I will be very very grateful to you.
Thanks in advance.
Click to expand...
Click to collapse
Download the original firmware and put your phone into recovery, then use odin to install the original firmware back into your phone. There are videos of how to install the original firmware using odin. Good luck, hope it helps...
I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.
vikrantnegi007 said:
I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.
Click to expand...
Click to collapse
Depends.
If you want to completely revert to factory settings (that means removing CWM recovery too) then use ODIN method.
If you wish to flash other roms in future then I suggest you to flash pure stock roms by Raj Joshi from android developement section.
Simply flash those like normal roms through recovery.
Tip: Flash CM7,miniCm7 and their derivatives for better performance. Stock roms are always laggy. (atleast for me)
Procedure and Happy Flashing
vikrantnegi007 said:
I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.
Click to expand...
Click to collapse
Hi @vikrantnegi007,
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9278/S5670DDKT3_S5670ODDKT2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion.in/software/download-odin-rooting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.
Hi, my note 3 has no os installed and I already tried flashing roms but it didnt work, neither did the stock rom. It has twrp installed on it. All caches are deleted and the only thing on it is twrp. How can I fix this?
Hi, thank you for using XDA Assist. Probably the easiest thing to do is flash the stock firmware with Odin. Alternatively you could adb push a Rom zip to your phone and flash that with twrp. Odin will return your device to stock and you'll have to root again and put twrp back on. It also will wipe your device. See if someone here can help further, http://forum.xda-developers.com/galaxy-note-3
Hey XDA Devs,
I have an old S2 on which I was trying to downgrade Android from CM12.1 to CM11.
CM12.1 had somehow installed it's own recovery console; using which I couldn't have flashed CM11, so for installing CM11 I tried to flash "CWM-KitKatCompatible-i9100" using ODIN 1.85.
The flash completed successfully but then my phone died. It doesn't even get into download mode or recovery mode anymore.
Also, while installing CWM, I flashed the PIT file "omap4_all_20110627_emmc.pit" as it was instructed on http://forum.xda-developers.com/galaxy-s2/general/how-to-root-install-cwm-recovery-flash-t1814801.
Is there any way to revive my phone?
I've already tried jig, even that doesn't work.
I need to get some data from my phone. Even if that's possible somehow?
Thanks,
- V
Hello Dear ,
If ur device get to booted to downloading mode i suggest u to flash stock rom with factory fw through odin here is 2 link for that rom
4.0.3
http://www.mediafire.com/download/etttzxwacsv3dg8/Galaxy+S2+i9100+Full+Factory+Rom+4.0.3.docx
4.1.2
https://mega.nz/#!LEF1AYqB!lMr2S90aZY_MChswC2pLdX4Zva11K6WVG9_WA8yNdNg
For how to flash it here some screenshots ,
https://www.google.com/search?q=how...ved=0ahUKEwj1696-mb_JAhWENxQKHVkTAb0Q_AUICCgE
Last chance for u if this not working for u then only one way 100% it's should work its via box like z3x box on any service center near u ok ..
Hope this will help You,
Thank You ,
Hello guys. I really need a very important help. I need to flash stock ROM 4.1.2 La Fleur onto my Samsung Tab 2 7.0. The issue is I want to flash using TWRP Recovery and I don’t have a working USB cable to connect to my computer. All I have is a SD Card and a Windows 10 computer to download stock rom. Anybody have a stock rom download and anybody know why when I use TWRP to flash the rom from recovery, it keeps saying MD5 file not found? I disabled zip file verification so I don’t know what’s the issue
GuestD0796 said:
Hello guys. I really need a very important help. I need to flash stock ROM 4.1.2 La Fleur onto my Samsung Tab 2 7.0. The issue is I want to flash using TWRP Recovery and I don’t have a working USB cable to connect to my computer. All I have is a SD Card and a Windows 10 computer to download stock rom. Anybody have a stock rom download and anybody know why when I use TWRP to flash the rom from recovery, it keeps saying MD5 file not found? I disabled zip file verification so I don’t know what’s the issue
Click to expand...
Click to collapse
Go to sammobile site
Download the specific rom
Install using odin