I just recently received my u11 I am running in cricket wireless. Is has been rebooting every now and then. Sometimes up to 10 times. Anyone else having his problem?
sortoh85 said:
I just recently received my u11 I am running in cricket wireless. Is has been rebooting every now and then. Sometimes up to 10 times. Anyone else having his problem?
https://lh3.google.com/u/0/d/0B25HRqZ1gsyEbWpVamdHc0h1ZEk=w194-h145-p-k-nu-iv1
Click to expand...
Click to collapse
i cannot access the link you posted and don't know what is there.. there shouldn't be any reboots ofc, try usual methods (put another sim card to test, factory reset, etc.) if it doesnt help send it back to HTC
sortoh85 said:
I just recently received my u11 I am running in cricket wireless. Is has been rebooting every now and then. Sometimes up to 10 times. Anyone else having his problem?
https://lh3.google.com/u/0/d/0B25HRqZ1gsyEbWpVamdHc0h1ZEk=w194-h145-p-k-nu-iv1
Click to expand...
Click to collapse
Here is a catlog of one of the reboots, I have done manual reboot, boot in to safe mode, tried factory reset but it will not do it (I press OK to confirm and it will wait but then do the normal reboot )
sortoh85 said:
I just recently received my u11 I am running in cricket wireless. Is has been rebooting every now and then. Sometimes up to 10 times. Anyone else having his problem?
https://lh3.google.com/u/0/d/0B25HRqZ1gsyEbWpVamdHc0h1ZEk=w194-h145-p-k-nu-iv1
Click to expand...
Click to collapse
Client does not have permission to access the url. Error 403.
Have you done anything to the phone like unlocking bootloader, root attempt etc?..
Beamed in by telepathy.
shivadow said:
Client does not have permission to access the url. Error 403.
Have you done anything to the phone like unlocking bootloader, root attempt etc?..
Beamed in by telepathy.
Click to expand...
Click to collapse
I added the log in the 3 post, one right above your original. Noni have not ... Fully locked and stock. As of right now its stuck rebooting I can't even use it anyone when I tried to go to recovery mod it just gives me a red exclamation point inside a triangle. And I can't do anything there ( tried doing that to see if I can factory reset from recovery mode but no luck)
sortoh85 said:
I added the log in the 3 post, one right above your original. Noni have not ... Fully locked and stock. As of right now its stuck rebooting I can't even use it anyone when I tried to go to recovery mod it just gives me a red exclamation point inside a triangle. And I can't do anything there ( tried doing that to see if I can factory reset from recovery mode but no luck)
Click to expand...
Click to collapse
once in recovery ( a red exclamation point inside a triangle) press power button and once volume up.
Dose not do anything.
sortoh85 said:
Dose not do anything.
Click to expand...
Click to collapse
Did you do the action velimirchek mentioned? Press and hold power and tap vol up once while still holding to power button at that red exclamation mark screen
Conan1986 said:
Did you do the action velimirchek mentioned? Press and hold power and tap vol up once while still holding to power button at that red exclamation mark screen
Click to expand...
Click to collapse
Ok I guess I was doing something wrong, just tried it one more time, did a FRB and it seems to be working.
Ok it started again. It happened when I was setting up a Bluetooth device
Related
Completely stock Tmo One S suddenly started to restart and now is stuck on boot loop, tried the RUU and keeps doing the same.
Any help, ideas, suggestions?
Sent from my Nexus 4
SIGUEL said:
Completely stock Tmo One S suddenly started to restart and now is stuck on boot loop, tried the RUU and keeps doing the same.
Any help, ideas, suggestions?
Sent from my Nexus 4
Click to expand...
Click to collapse
Try to factory reset the phone. Instructions from official htc site:
Performing a factory reset using hardware buttons
If you can’t turn HTC One S on or access settings, you can still perform a factory reset by using the hardware buttons on HTC One S.
Important: The Fast boot option in Settings > Power must not be selected.
Press and hold the VOLUME DOWN button, and then press and hold the POWER button.
Wait for the screen with the three Android images to appear, and then release the POWER and VOLUME DOWN buttons.
Press VOLUME DOWN to select FACTORY RESET, and then press the POWER button.
Click to expand...
Click to collapse
SIGUEL said:
Completely stock Tmo One S suddenly started to restart and now is stuck on boot loop, tried the RUU and keeps doing the same.
Any help, ideas, suggestions?
Sent from my Nexus 4
Click to expand...
Click to collapse
Already did that, used the RUU and it worked, sort of...
if it power ups completely I cant reboot it because it goes back to a bootloop and the Wifi doesn't work it gives an error when you try to start it.
Its starting to drive me nuts
Sent from my Nexus 4
SIGUEL said:
Already did that, used the RUU and it worked, sort of...
if it power ups completely I cant reboot it because it goes back to a bootloop and the Wifi doesn't work it gives an error when you try to start it.
Its starting to drive me nuts
Sent from my Nexus 4
Click to expand...
Click to collapse
Have you flashed custom ROM or recovery previously? No unlocked bootloader?
SIGUEL said:
Already did that, used the RUU and it worked, sort of...
if it power ups completely I cant reboot it because it goes back to a bootloop and the Wifi doesn't work it gives an error when you try to start it.
Its starting to drive me nuts
Sent from my Nexus 4
Click to expand...
Click to collapse
No, completely stock virgin never touched.
The wierd thing is sometimes it gets stuck on a bootloop and then it boots out of the blue.
Sent from my Nexus 4
Does anyone has the stock JB Wifi Module available, wifi nor bluetooth works.
Sent from my Nexus 4
Not sure if anyone else has tried but today's ioroot 25 update includes root for those on 4.4.2. I tried using the manual method indicated only to realize that I can't reboot into the stock recovery. Apparently two other people with the D801 have the same problem, where after doing "adb reboot recovery" the phone boots into recovery for an instant and immediately reboots. Can anyone else running stock 4.4.2 confirm whether they experience the same behavior?
ChaoticKinesis said:
Not sure if anyone else has tried but today's ioroot 25 update includes root for those on 4.4.2. I tried using the manual method indicated only to realize that I can't reboot into the stock recovery. Apparently two other people with the D801 have the same problem, where after doing "adb reboot recovery" the phone boots into recovery for an instant and immediately reboots. Can anyone else running stock 4.4.2 confirm whether they experience the same behavior?
Click to expand...
Click to collapse
Same issue for me, I suppose the only difference is mine rebooted then wiped my phone the booted back up. Looks like we can not boot into recovery?
18.4009 said:
Same issue for me, I suppose the only difference is mine rebooted then wiped my phone the booted back up. Looks like we can not boot into recovery?
Click to expand...
Click to collapse
Same problem, just posted about this actually haha. Where's our solution?!?!
18.4009 said:
Same issue for me, I suppose the only difference is mine rebooted then wiped my phone the booted back up. Looks like we can not boot into recovery?
Click to expand...
Click to collapse
That sucks. By any chance did you happen to have a copy of the stock ROM on your phone? I'm wondering if it just automatically flashes whatever file is made available to it. I did notice some of my widgets were reset but otherwise I can't see that anything about my phone was changed.
ChaoticKinesis said:
That sucks. By any chance did you happen to have a copy of the stock ROM on your phone? I'm wondering if it just automatically flashes whatever file is made available to it. I did notice some of my widgets were reset but otherwise I can't see that anything about my phone was changed.
Click to expand...
Click to collapse
No, sure didn't. I have it all setup again.. Going to hold off now until we see a for sure fix.
I really miss having root so I decided to follow this guide: http://forum.xda-developers.com/showthread.php?t=2432476
But now for what ever reason attempting to back to 4.2.2 will not work. Fails every time... I didn't have that issue before so I am not sure what the deal is.
autoprime said:
TMO D801 users on KK... there is SOME hope still. I am on ZVA on my Sprint G2(4.2.2) which has no "adb reboot recovery" option... it does tne same thing thats happening to you guys.. quick "system update" msg (or something along those lines) and then reboots phone.
now.. on sprint g2.. vol up + power brings you to the hard reset menu. BUT.. vol down + power brings me to the full STOCK recovery menu.
Now I know your method to get into the hard reboot screen is different.. i believe its vol down + power.. let go at lg screen the press again? well has anyone tried any alternate combos? there may be another button combo to bring you into the full stock recovery menu instead of the hard reset menu. once at the full recovery menu you can use adb sideload to flash to kk_root.zip in ioroot25.
good luck
Click to expand...
Click to collapse
It seems that ours is not the only model G2 with this issue. Looks like if we can figure out the button combo to bring us into stock recovery we should be able to get this to work. Having spent the greater part of the last hour trying to come up with something, I still haven't found anything. What I do know is pressing vol down + power until the LG logo and either vol down + power OR vol up + power will take me to the hard reset menu.
I also managed to get to a menu that asked if I want to answer phone calls with physical buttons by holding down all three, releasing and holding them again. But for some reason I wasn't able to replicate this. Now when I continue holding down all three buttons at the LG logo, after getting there using any button combo, the phone just shuts off.
Has anyone successfully entered the D801 stock recovery using button combos? I have yet to find any method other G2 users discussed that works for me.
Hi, my Shield is stuck on its boot screen, the one with the green shield and the mist whatever. I've tried restarting it but nothing is happening. I don't even know what caused it, I just picked it up and opened it and it was on its boot screen. Last thing I knew before it, it was working perfectly fine. I don't have recovery installed... It is rooted but I doubt that would cause this... any help?
DrOcsid said:
Hi, my Shield is stuck on its boot screen, the one with the green shield and the mist whatever. I've tried restarting it but nothing is happening. I don't even know what caused it, I just picked it up and opened it and it was on its boot screen. Last thing I knew before it, it was working perfectly fine. I don't have recovery installed... It is rooted but I doubt that would cause this... any help?
Click to expand...
Click to collapse
That's happened to me before.have you tried leaving it off for a few minutes and then restarting it. maybe try while its on the charger.If that doesn't solve it I would attempt to boot into stock recovery and perform a FDR. either way someone will get you back up and running again.
hexitnow said:
That's happened to me before.have you tried leaving it off for a few minutes and then restarting it. maybe try while its on the charger.If that doesn't solve it I would attempt to boot into stock recovery and perform a FDR. either way someone will get you back up and running again.
Click to expand...
Click to collapse
I left it off all night and after I turned it on again this morning it's still stuck. I've tried it both on and off the charger, won't work either way.
DrOcsid said:
I left it off all night and after I turned it on again this morning it's still stuck. I've tried it both on and off the charger, won't work either way.
Click to expand...
Click to collapse
Do you know how to boot into recovery mode?
hexitnow said:
Do you know how to boot into recovery mode?
Click to expand...
Click to collapse
Yes, but selecting the recovery mode option comes up with a screen that says "no command".
DrOcsid said:
Yes, but selecting the recovery mode option comes up with a screen that says "no command".
Click to expand...
Click to collapse
That's supposed to happen.you need to press home and back I believe to get the menu to pop up. might not be those buttons but there is a button combination to get it to popup.
hexitnow said:
That's supposed to happen.you need to press home and back I believe to get the menu to pop up. might not be those buttons but there is a button combination to get it to popup.
Click to expand...
Click to collapse
Well yes, I hold home and back when I turn it on, and it brings me to a screen with these options:
Continue
Restart Bootloader
Recovery mode
Reboot
Poweroff
Selecting "Recovery mode" just brings me to a screen that says "no command". I tried doing various button commands to try and make something happen, but nothing happens.
DrOcsid said:
Well yes, I hold home and back when I turn it on, and it brings me to a screen with these options:
Continue
Restart Bootloader
Recovery mode
Reboot
Poweroff
Selecting "Recovery mode" just brings me to a screen that says "no command". I tried doing various button commands to try and make something happen, but nothing happens.
Click to expand...
Click to collapse
I realize that but Keep trying there's a two button combo to get the RECOVERY MENU to show up. If you can't get it I'll go get my shield and flash the stock recovery so i can figure it out.
hexitnow said:
I realize that but Keep trying there's a two button combo to get the RECOVERY MENU to show up. If you can't get it I'll go get my shield and flash the stock recovery so i can figure it out.
Click to expand...
Click to collapse
Okay, I managed to get it to work. What do I do now?
DrOcsid said:
Okay, I managed to get it to work. What do I do now?
Click to expand...
Click to collapse
factory data reset, reboot.
hexitnow said:
factory data reset, reboot.
Click to expand...
Click to collapse
Okay, that worked. Thanks.
Nvidia Shield Portable
My sons Shield Portable is stuck on the screen that has a dead looking Android that says no command after trying to install a factory update. I have tried holding down the power button the home button and back button to try and recover. The recovery mode did nothing. The restart bootloader did nothing. I have pressed the power button and the home button at same time to try and wipe the data. I did wipe and hit the factory reset once I did that I hit reboot. when it started back up it still says the same thing. Please help
same problem
I have the same problem if anyone knows the combo to go straight into recovery I would really appreciate it.
about that...
DrOcsid said:
Okay, I managed to get it to work. What do I do now?
Click to expand...
Click to collapse
Do you remember what button combo you used? My shield gets the same "no command" screen when i enter recovery mode.
I'm in the same boat as he was help please
DrOcsid said:
Okay, I managed to get it to work. What do I do now?
Click to expand...
Click to collapse
I can't get out of boot loader when I restart it just stays at same screen as this guy and I don't know what to do help please
Hey guys sorry if this is the wrong place but i rooted and installed a custom rom on my shield but regretted it right away because i loved the button mapper. Now when i try to flash the recovery.img via adb it fails every time i dont suppose anyone can help at all been stuck like this for ages now driving me mad my son cant use it now because he needs the button mapper for his games lol im not stuck on a boot screen but seeking any help i can at all
Cheers guys
I bricked my htc one m8. Dont even know how, all i had was cyanogenmod 11 installed and it and my phone just boots into black screen after initial splash screen. I can get the charging indicator to show at low or full battery and i get vibration feedback when i hard reboot. I cant get into recovery or bootloader and my computer doesn't recognize it. What do!!
piisceiss said:
I bricked my htc one m8. Dont even know how, all i had was cyanogenmod 11 installed and it and my phone just boots into black screen after initial splash screen. I can get the charging indicator to show at low or full battery and i get vibration feedback when i hard reboot. I cant get into recovery or bootloader and my computer doesn't recognize it. What do!!
Click to expand...
Click to collapse
if your phone boots into a black screen its not hardbricked, hardbricked means it wont turn on at all and you have no indicators
piisceiss said:
I bricked my htc one m8. Dont even know how, all i had was cyanogenmod 11 installed and it and my phone just boots into black screen after initial splash screen. I can get the charging indicator to show at low or full battery and i get vibration feedback when i hard reboot. I cant get into recovery or bootloader and my computer doesn't recognize it. What do!!
Click to expand...
Click to collapse
Does ADB recognize the device?
piisceiss said:
I bricked my htc one m8. Dont even know how, all i had was cyanogenmod 11 installed and it and my phone just boots into black screen after initial splash screen. I can get the charging indicator to show at low or full battery and i get vibration feedback when i hard reboot. I cant get into recovery or bootloader and my computer doesn't recognize it. What do!!
Click to expand...
Click to collapse
Unplug your phone and hold volume up and power for 30
seconds. Do not have it plugged in while doing this.
Bierce22 said:
if your phone boots into a black screen its not hardbricked, hardbricked means it wont turn on at all and you have no indicators
Click to expand...
Click to collapse
Ok so thats good to know
DizDroid said:
Does ADB recognize the device?
Click to expand...
Click to collapse
No but i could be doing aomething wrong. Ill give it another go
piisceiss said:
No but i could be doing aomething wrong. Ill give it another go
Click to expand...
Click to collapse
You may need to uncheck usb debugging in developer options then reboot and go in and check usb debugging again then try adb tools using adb devices and see if it works then. Some m8's can be a real pain that way you just need to keep trying.
M9guy said:
You may need to uncheck usb debugging in developer options then reboot and go in and check usb debugging again then try adb tools using adb devices and see if it works then. Some m8's can be a real pain that way you just need to keep trying.
Click to expand...
Click to collapse
I cant boot into the os, it only goes to a black screen. It still vibrates though when i try doing any form of reset
piisceiss said:
I cant boot into the os, it only goes to a black screen. It still vibrates though when i try doing any form of reset
Click to expand...
Click to collapse
I would run the newest ruu that dottat has posted in the android development section for this phone, put it on your sd card using your computer, then put it back in your phone and boot to fastboot and let it pick it up and hit I believe it is yes and it will restore your phone. You are on 4.4.4 right ? If you are having problems getting to fastboot hold power and volume up until you see the lights change and or it vibrate then quickly switch to power and volume down and it should take you to fastboot, it may take you multiple tries to get it there. This sounds like the screen of death issues people have had on viperone which the fix for that so far has been to reverse the 4g handoff fix as most people that have the sod they had used the 4g handoff fix but if you cant get past the black screen then you cant do the fix for that. Have you tried leaving your phone sit for a while to see if it comes out of it ? Also most people only had that issue in weak signal areas so a good signal area could get your screen working again if you had done the 4g handoff fix. If you did some have said that the change can stick even through a ruu, but I cannot verify that either way.
Can I say I'm having an almost same problem.
I wiped my phone in prep of loading a new rom.
RUU the firmware for 4.4.4
Loaded twrp
and then it rebooted to the htc screen.
Now I can't get past that screen. I can hard reboot but it only comes back to that screen. and if I try to access it through the computer it can't load the driver so that I can sideload.
Help please
rcbarrieault said:
Can I say I'm having an almost same problem.
I wiped my phone in prep of loading a new rom.
RUU the firmware for 4.4.4
Loaded twrp
and then it rebooted to the htc screen.
Now I can't get past that screen. I can hard reboot but it only comes back to that screen. and if I try to access it through the computer it can't load the driver so that I can sideload.
Help please
Click to expand...
Click to collapse
it's tricky to get it back to hboot... but you can with practice. Hold power a both volume buttons until you think it finally has rebooted. Switch to only holding vol down to enter hboot. Timing and practice makes perfect.
It took about an hour of trying. But I did it. Plus I had to do a few other things to get things remounted.
rcbarrieault said:
It took about an hour of trying. But I did it. Plus I had to do a few other things to get things remounted.
Click to expand...
Click to collapse
I will have to try this. What other things did you do?
Once I was back in recovery I reformatted before rebooting and then from recovery I installed the rom.
dottat said:
it's tricky to get it back to hboot... but you can with practice. Hold power a both volume buttons until you think it finally has rebooted. Switch to only holding vol down to enter hboot. Timing and practice makes perfect.
Click to expand...
Click to collapse
I did this and we're all fixed, thank you for all the replies
dottat said:
it's tricky to get it back to hboot... but you can with practice. Hold power a both volume buttons until you think it finally has rebooted. Switch to only holding vol down to enter hboot. Timing and practice makes perfect.
Click to expand...
Click to collapse
I agree with Dottat, faced the same issue when trying to flash ARHD 22.1 on my Verizon M8. I think I sprayed some **** in my pants with that loud fart .
After trying several times I got the trick and could get into Hboot. The issue I think was I was holding Power + Volume up & down for more than required time and it Rebooted. We need to Switch Off the device by Holding Power + Volume UP & Down button for about 8-10 secs and then just remove the finger from Volume UP button. It takes you to Hboot mode..
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Works entrance for the recovery (Vol+ and Vol- and Power)?
rakrakrak said:
Works entrance for the recovery (Vol+ and Vol- and Power)?
Click to expand...
Click to collapse
No bro...
eusagc said:
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Click to expand...
Click to collapse
What happens when you do a Vol up + power?
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
eusagc said:
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Ok dude, will do. Thanks!
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
CloudCompute said:
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
eusagc said:
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Click to expand...
Click to collapse
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
CloudCompute said:
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
Click to expand...
Click to collapse
That's correct bro. Although it appears from adb that I was able to install the stock recovery, I cannot access it with Vol+ and power.
CloudCompute said:
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
Click to expand...
Click to collapse
Yes, I did. And I can't even boot to bootloader after all that... The phone only seems to charge, but is stuck at the logo.
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
stinka318 said:
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
Click to expand...
Click to collapse
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
eusagc said:
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
Click to expand...
Click to collapse
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
eusagc said:
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
Click to expand...
Click to collapse
Go ahead, send it to Huawei service centre. They'll have ways to reach the internal memory after opening up the device.
stinka318 said:
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
Click to expand...
Click to collapse
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
eusagc said:
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
Click to expand...
Click to collapse
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
eusagc said:
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
Click to expand...
Click to collapse
All well now?
CloudCompute said:
All well now?
Click to expand...
Click to collapse
I was out of town for the past few weeks and didn't have time to do this. I'm back now and plan to work on this tonight. Thank you bro, I'll let you know how it goes...