Jiayu S3 USB Audio support - JiaYu S3 Accessories

Hello everyone,
The Jiayu S3 is my daily driver for like 2 and a half year now. Sadly enough, my 3.5mm headphone jack stopped working previous week. This is quite a bummer since I listen to music on my phone all the time.
I did some diagnosis and I concluded that my 3.5mm headphone jack is broken / doesn't connect well with the headset anymore, causing my music player to skip tracks or pause when you touch the headphone jack.
Since I don't want to purchase another phone (yet) I searched for an alternative solution. I found this cable on the internet:
https://nl.aliexpress.com/item/Micr...lgo_pvid=23ef89fa-7a24-45ee-bb9d-e92e877bfe05
Does anyone know if this cable will work with my Jiayu S3, or did somebody ever try this out?

AS far as i know, this is not supported
Can't you just buy an SMD jack, and ask in a store to soldered it?
it's not that hard ...
Or, you could try using some nice BT headphones ?

Related

3.5mm Jack vs HTC plug

given that the sprint has a 3.5mm jack for earphones, does the standard htc plug (where you charge / sync) also have a connection to listen to music? and if yes, does that then mean that we can plug in 2 sets of earphones? one on the 3.5mm and one on the htc mini- usb jack? i don't have standard htc headsets and i'm tempted to buy a set just to check...
cheers
I was able to test this with my headphones from my old Mogul and yes, it does work with both headphones connected at the same time -- audio from both.
HTH
thanks mate! now i can go ahead and buy a set. it actually provides a good alternative to continuous plugging and unplugging from the 3.5 jack. there is also bluetooth but the mini-usb gives me another option for tunez.
cheers
I got curious and tried it.
Can't figure out why you'd need it, but it works on my usc tp2
g2tl said:
I got curious and tried it.
Can't figure out why you'd need it, but it works on my usc tp2
Click to expand...
Click to collapse
thanks mate, just tried it and it works fine as well. as to where i would use it:
1) gives me an alternative to constantly plug into the 3.5mm jack. ages ago i read that the plug connections eventually wear out. not sure about statistics and all though for the tp2. but a mate of mine did return his 6-month old unit for this reason. claims that one day the sounds were all gone. only by plugging in his headphones did he hear anything. he sent it back for replacement and the diagnosis showed that the plug connections were worn out. well in all fairness he did listen to his tunez 2 times a day...that meant plugging in and out twice a day as well. seems the phone was "stuck" in headset mode.
2) i use an i-tech bluetooth set of which i can plug in my noise cancellers. if the battery ran out, i can then plug into the 3.5mm. or, i recently got a mini-usb to 3.55mm headset converter. again, good alternative to constantly plugging into the 3.5 jack
3) my wife =) on a recent trip to canada...of which took ages...we shared the headset plugged into the 3.5 jack. by plugging into the mini-usb, that way we can both have our own headsets at the same time. quite weird to have one ear listening to tunez while the other being bombarded by sounds from the plane =)
cheers mate
Sorry, I did not see the previous replies ...
TP2 uses USB-B for charging and syncing. This USB-B has audio out as well as video out. I don't know if one takes priority over the other (USB-B audio or 3.5mm audio out), or if both can be used together.
Last week I ordered a USB-B cable to output video/audio to external monitor & speakers (watch movies externally) via RCA jacks (Right/Left/Video).
Why not just use a 3.5mm audio splitter jack to get dual out audio? (personally, I'd rather put wear & tear on a 3.5mm audio jack than a mini-USB jack ...). Seems a 3.5mm splitter would be simple clean output method. Additionally, you could use BT-Audio paired possibly to more than one device headset for dual audio out ...?

TRRS Pinouts for Desire-like proper headphones without issues of direct plugging in

Sup all would anyone have the actual TRRS pinouts for the audio jack for the desire I would like to make a up a lead that will allow me to plug an ordinary pair of headphones in using a proper TRRS jack instead of a TRS jack. thanks. There are definately issues plugging in a headphone directly or maybe it is my unit faulty?
Edited, this topic will show you the best way to connect your headphones to your desire as some people will experiance problems with pluggin in normal 3.5 jack plug headphones, this is due to the desire using a trrs socket for the microphone instead of a trs socket that normal headphones use.
pretty sure it is:
tip - left audio
ring 1 (closest to tip) - right audio
ring 2 - data of some kind
shield - ground
Hope this helps
cheers for that, im having some peeps tell me that i can just plug in an ordinary pair of headphones into the phone without any ill effects, i am concerned that i will have a problem because headphones are trs jacks and the desire has the trrs 3.5 jack. can anyone confirm any details on this for me please
nah you can use a normal TRS 3.5mm jack with no problems. I guess that when you use a normal TRS jack then shield and ring 2 on the connector are both connected to shield on the jack so it adjusts the software accordingly. But yea, no problems.
cheers for that
edited, we have since discovered that this is not the case, please read the entire topic for the correct way to connect headphones to the desire.
standard 3,5 mm (TRS) headphones DO CAUSE ISSUES
Was about to resend my HTC Desire, because it randomly called, skipped music stopped the music, FM-radio freeze etc. from the moment I connected my high-end 3,5mm headphone (TRS type: 3 contacts).
No issues with the standard headset delivered with the HTC Desire (TRRS type: 3,5mm 4 contacts).
So, you might need a TRS -> TRRS adapter.
Anyone with other experiences???
Basically what I have found is that many of the normal headphones are not working correctly because it is a trrs socket that is used. To me this would mean that normal headphones shouldnt be used, I have tried various headphones but there are definately issues with them,
The main issue I was having was as you have said above and also the base wasnt right with them
I have since bought this
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=130384433476&ssPageName=STRK:MEWNX:IT
which arrive today and when I am using this in conjunction with my headphones I now have the proper base to the set and NONE of the problems I was having when i was plugging them into the phone directly......... they just didnt sound right, now using griffin smarttalk this i can definately tell the difference now especially in the base, also this unit will lower the volume and allow you to make a call automatically with built in mike, clicking it twice doesnt skip the track suggested instead it will ring the last number dialled in the phone so a bonus actually to me
the straight adapters ie trrs to trs are very nearly the same price as this if not more expensive so i would recommend this all day long to you. At £9.75 delivered bargain m8, bought late evening on the 20th arrived this morning what more can i say, but if you are having issues it is definately in my eyes because of the difference in the trrs socket to the trs socket,
the base is fantastic on this phone now, before it was terrible, now i just need an equaliser to remove some of it
When you speak of "normal headphones", are you referring to simple 3.5 TRS headphones, or headphones with a mic ?
Cause if the majority of the headphones (without mic I mean) won't properly work with the Desire, it's a major flaw according to me.
I confirm: TRS (3 contacts, without mic) do not work...
...I tried 4 different 3,5mm stereo headsets (TRS type, 3 pole, without mic). NONE of them worked correctly (phenomenons as described above).
When you plug a 3 pole TRS headphone in the Desire 4 pole TRRS headphone output, a short circuit is generated between the first 2 internal contacts (seen from connector input: ground + control line).
I suspect that the Desire firmware cannot detect/handle this situation, and so it causes random actions (prev, next, call numbers, stop, play, ....)
I suspect that this issue could be solved with a firmware upgrade....
there is no way they would release hardware with a 3.5mm socket that you cant plug a 3.5mm jack into right? the firmware does detect when you use a TRS instead of a TRRS. You get a different icon on your notification bar for each of them. As ive said before my AKG's have worked perfectly so far and have shown none of the problems listed above.
This afternoon I quickly tested my Seinheiser PX100 headphones with a friend's desire and the Htc music player.
It worked flawlessly. Volume was good and it didn't play/pause/skipped tracks.
As I said it was a really quick test so I can't say for sure that everything's was okay.
Nonetheless apparently a lot of people experienced problems with numerous headphones. To me it's really a shame you can't even plug ANY 3.5mm jack headphones with the desire ...
I hope a software update could fix this.
I also had this problem when connecting my Desire to my car radio using an standard 3.5mm AUX cable. Will this cable solve my problem or will my car radio not be able to recognize a 4 pole cable?
http://cgi.ebay.nl/3-5mm-Male-TRRS-...erAccess_RL&hash=item5d28c530c1#ht_1252wt_939
I think this might be an issue of certain cables not making a full connection due to the shape of the case surrounding the socket. I had no problems with my headphones, sound was good and loud enough although I could see how it might not be loud enough for some.
I did start having issues when I plugged the aux lead in my car into the phone. The lead has a large shroud that obstructed the plug from being plugged all the way in. This gave the same problems as described in other posts, skipping tracks and also crashing the music software at one point.
I replaced the lead with another that had a better fit and the problems went away but I did notice when I leaned against the lead while it was playing music in my car it started skipping track again.
I wonder what HTC have to say about this....
DHel01 said:
I also had this problem when connecting my Desire to my car radio using an standard 3.5mm AUX cable. Will this cable solve my problem or will my car radio not be able to recognize a 4 pole cable?
http://cgi.ebay.nl/3-5mm-Male-TRRS-...erAccess_RL&hash=item5d28c530c1#ht_1252wt_939
Click to expand...
Click to collapse
I solved those problems with this lead- i dont think the one your showing will work for you
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220593400305
they come from china etc however only 5 days to arrive from ordering.
and I now enjoy trouble free music. I also have ordered the Griffin Smart Talk so i can listen to my headphones and be able to answer the phone as well however I didnt want to use it for plugging into a car stereo etc etc so i wanted a straight lead conversion.
Just a quick warning the first lead i ordered from this person was faulty, however i had also ordered 3 other leads from the same person as an after thought which were all perfect.. as they are only pennies it is worth ordering one or two spare for redundancy purposes. I decided to order 3 as backups more in case i broke one and the person stopped selling them etc etc
These leads will allow you to connect the htc to any other source including external speakers which didnt work when putting them in normally but did work when i used this cable in conjunction with it.
this cable is a trrs to trs jack plug and is used to convert a 4 pin socket to a 3 pin socket jack plug.
I've been using a pair of JVC Gummy Air on my Desire since I got it, not a single problem.
Re: TRRS Pinouts for Desire
I've used some headphones, and 2 different aux connector for the cars and all 3 work absolutely perfectly. No issues at all.
Sent from my HTC Desire
I have been using my Yuin PK3 earbuds for music since I got my Desire and it has been working without any problems.
TheOriginalKi said:
I've been using a pair of JVC Gummy Air on my Desire since I got it, not a single problem.
Click to expand...
Click to collapse
Oh yeah and I've also hooked it into the tv via a standard audio cable!
Not sure what you guys are talking about but my AIAIAI headset works fine with the Desire
Mic working too!
aiaiai.dk/headsets/tracks-headsets/tracks-headset-black.html
^those
Sennheiser PXC 250 with NR, no problems

External microphone for 3.5mm audiojack.

Hey!
Anyone knows if it's possible to connect a external microphone in the 3.5mm jack. Would be nice to be able to plug in a better microphone when recording music shows etc. Shouldnt it be possible since you can speak through the htc-headset?
I don't think that you can plug a mic in it, this jack is "way-out" only, not "in"...
At least i never tried, but i guess it's how it works (if anyone can confirm this or prove me wrong ).
It's a 4 pin 3.5mm TRRS connector. It has a mic connector built in as well as the audio and ground.
I don't know if you can get a microphone with that specific connector, look it up and see... but it would be pretty easy to make your own connector if you cannibalise a headset or something like that and then connect whatever mic you wanted to that.
Not sure about the quality, but dealextreme sku.20714 seems like to fit your description.
I bought one of these some time ago to connect my Klipsch headphones.
http://cgi.ebay.co.uk/3-5mm-Headpho...GS-/280544944694?pt=UK_Mobiles_Accessories_RL
It is still recognised as a headset even when there are no headphones plugged into it.
So the quality for what you want is probably poor BUT it does prove that it can be done.
Perhaps one of these PLUS a good quality mic PLUS a soldering iron is the answer

[Q] Dock/Speaker

Hi everybody, after some unsuccessful searches on google i'm trying here i hope someone will help me to find a solution. I have the infuse with jelly bean liquid smooth rom everything runs good, from a couple of days i'm thinking that i would like to listen to my music with a speaker or something in order to have louder effect. i already have awesome beats so my audio it's better but the speaker of the phone can't compare with a docking station or a bigger speaker. So here my questions:
1. I found the docking station on amazon designed for the samsung infuse it's very nice but does that play audio or not! it charges the phone but has any speaker integrated or not?
2. I have an hp portable speaker can i connect it to my phone or not? the problem is that i need an adapter cause the cable of the speaker is not compatible with the phone. is any adapter that will able me to connect phone to speaker? The speaker model is WN483AA HP Portable Speaker, what kind of adapter I need?
If you can help me thanks in advance to xda and everybody xda the best!!!!
sorry for any mistakes working on my english everyday
The docking station for Infuse does not have a speaker. It has a 3.5 mm jack ( same size as on phone ) to plug a speaker into.
I looked at the HP speaker you have and can not come up with an adapter that can be used.
I googled and found this:
http://www.pcmag.com/article2/0,2817,2410219,00.asp
A few other similar things googling MobiAir smartphone dock
I'm sure you can find more.

USB C + 3.5mm Jack

Hi there. Anyone of you know if there is such adapter in the market? Basically im looking for a USB type C adapter the connects to the phone and then splits into another USB c + 3.5mm Jack
Sent from my XT1080
Hmmm.... I just assumed something like this would exist by now but some initial searching on various sites isn't turning up anything. (I did find one for the Lightning connector.)
Honestly, if you listen to a lot of music and can afford it, I'd highly recommend getting BT headphones/speakers (or the JBL mod of course!). I switched to BT headphones a number of years back... well before I got my Moto Z, and never looked back. Just not having to deal with the cords while riding the bus is soooo nice... plus most BT headphones have controls right on them to handle moving between tracks and adjusting volume.

Categories

Resources