Database Info

[zip]Google apps 2.2 for tenfar froyo rom

Here is an update zip with all google staf for custom froyo rom.
Thanks to tenfar for his great work.
After restoring froyo, install from custom recovery choosing the zip below.
http://www.multiupload.com/LJ51YZYU7E
you need to install a task killer to make your phone run fast at first, i recommend process manager lite.

The update.zip haven't signed....
any other way to flash the update.zip?

casper326 said:
The update.zip haven't signed....
any other way to flash the update.zip?
Click to expand...
Click to collapse
yes whith defy custom recovery

casper326 said:
The update.zip haven't signed....
any other way to flash the update.zip?
Click to expand...
Click to collapse
you need to flash this update right after you restore the nandroid backup when you still have custom recovery.
i will work on the custom recovery these days.
hope I can get it work on andoid 2.2

tenfar said:
you need to flash this update right after you restore the nandroid backup when you still have custom recovery.
i will work on the custom recovery these days.
hope I can get it work on andoid 2.2
Click to expand...
Click to collapse
also you can install the custom recovery after restoring and then install the zip.

bihariel said:
also you can install the custom recovery after restoring and then install the zip.
Click to expand...
Click to collapse
can't get into custom recovery after boot into 2.2...

casper326 said:
can't get into custom recovery after boot into 2.2...
Click to expand...
Click to collapse
you need to install it

Para Bihariel
Sorry i will make an question in spanish
Cuando instalas el custom recovery ¿?¿?
A mi no me funciona al reiniciar, se queda la pantalla en negro.
O quizas sigues estos pasos:
1º Restaurar el nandroid
2º Las gapps
3º El boot 2.2

Filipitripi said:
Sorry i will make an question in spanish
Cuando instalas el custom recovery ¿?¿?
A mi no me funciona al reiniciar, se queda la pantalla en negro.
O quizas sigues estos pasos:
1º Restaurar el nandroid
2º Las gapps
3º El boot 2.2
Click to expand...
Click to collapse
asi es como lo hice yo, pero si ya has restaurado y reiniciado, puedes instalr el recovery y luego flashear el zip.

wrong thread, sorry!

Recovery
Despues de instalar el boot 2.2 no me funciona el custom recovery, al reiniciar se queda la pantalla en negro
Sorry for my english ..
After installing 2.2 boot, the custom recovery dont work for me, when you restart the screen stays black

Filipitripi said:
Despues de instalar el boot 2.2 no me funciona el custom recovery, al reiniciar se queda la pantalla en negro
Sorry for my english ..
After installing 2.2 boot, the custom recovery dont work for me, when you restart the screen stays black
Click to expand...
Click to collapse
hazlo com djiste antes, restaura luego flashea y luego el boot 2.2.

Correcto con los pasos que te dije antes, ahora solo esperar para que funciones el recovery en 2.2.

bihariel said:
you need to install it
Click to expand...
Click to collapse
Sure I have...
Then I choose recovery boot.
Then It just reboot my DEFY normally...

casper326 said:
Sure I have...
Then I choose recovery boot.
Then It just reboot my DEFY normally...
Click to expand...
Click to collapse
it seems tha recovery not working.
tenfar, how did you made the nand backup if the recovery is not working?
please could you make it work.

bihariel said:
it seems tha recovery not working.
tenfar, how did you made the nand backup if the recovery is not working?
please could you make it work.
Click to expand...
Click to collapse
Yes... the other post mentioned ....

tenfar said:
you need to flash this update right after you restore the nandroid backup when you still have custom recovery.
Click to expand...
Click to collapse
Do I understand correctly that I flash in RSD the 2.2.sbf and then I go to recovery to install this zip?
Doesn't RSD boot the phone and I won't have Clockwork mod anymore to use the zip?

1. Restore the 2.2 nandroid.
2. Wipe data.
3. Apply this update.zip.
4. Flash using RSDlite.

Worked a treat for me!
The steps i carried out were as follows:
Installed the droid.zip using clockwork mode recovery.
Flashed the boot file with rsdlite.dy
copied system recovery .apk file and the google app .zip file to root of sdcard
reinstalled system recovery from sdcard, after installing recovery, entered recovery mode, installed update from .zip file all works fine.
Worth mentioning, after installing this the market app is also now present and working too.
Many thanks!
Andy

andyfletcher said:
Worked a treat for me!
The steps i carried out were as follows:
Installed the droid.zip using clockwork mode recovery.
Flashed the boot file with rsdlite.dy
copied system recovery .apk file and the google app .zip file to root of sdcard
reinstalled system recovery from sdcard, after installing recovery, entered recovery mode, installed update from .zip file all works fine.
Worth mentioning, after installing this the market app is also now present and working too.
Many thanks!
Andy
Click to expand...
Click to collapse
could you giveme the link of the recovery which you used and what rom you had 2.21 or 2.51.

[ROM] [OFFICIAL] [JB 4.2.1] Hisense HS-U980 [MT6589]

------------------------------------------------------------------------------------
This is for Hisense HS-U980
and sometimes called Hisense Infinity Pure 1
Phone specs can be found here: http://www.hisense.co.za/mobile/u980
------------------------------------------------------------------------------------
NOTE: PLEASE UNZIP/EXTRACT BEFORE TRYING TO INSTALL THEM !
Hello everyone,
I've been a user of this powerful and cheap android for quite a while now,
I once made a thread looking for custom ROMs for it here:
http://forum.xda-developers.com/android/help/request-custom-rom-hs-u980-helpfull-t2825786
But after getting used to it, it was and still is a great ROM and android version.
But seems that quite some people are looking for HS-U980 ROM so that they can repair their bricked phone, but no one provided.
So, that's what I'm here for.
(This is the first time for me backing up a ROM, I thought it will take me some time and effort, but it was really easy. My phone is ROOTED, so I guess my ROM saved the ROOT. I only did a factory reset and checked the root is there, and saved the ROM)
The ROM is made to work on TWRP or CWM and I put the whole folder in a ZIP file.
TWRP ZIP file size: ~600 MB
Size after extraction: ~920 MB
CWM ZIP file size: ~440 MB
Size after extraction: ~720 MB
TWRP ROM link (MEGA): https://mega.nz/#!BUpiRLAT!ICol0akNciVvUbNbl1AD6nJcS6p2T2jz9OZxro_97ZE
CWM ROM Link (MEGA): https://mega.nz/#!tFRQhYAI!DkszoHn6n97XyzTcswWEoZE2MRpmeM5R2UKVXj7GYYs
Please leave your feedback and comments.
Enjoy!
P.S: MobileUncle Tools from Google Play seems to have an "Update tool" in it, for flashing using SD card.
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en

First of all, thanks for the ROM.
But how do you manage to install CWM on a hisense U980? I can't find any way to do that, the only custom recovery that I found was a chinese version of TWRP.
I guess the only way to flash that rom is using the backup/restore function on CWM. Am I correct? Can you help me?
Thanks in advance.
Regards.

Dasold said:
First of all, thanks for the ROM.
But how do you manage to install CWM on a hisense U980? I can't find any way to do that, the only custom recovery that I found was a chinese version of TWRP.
I guess the only way to flash that rom is using the backup/restore function on CWM. Am I correct? Can you help me?
Thanks in advance.
Regards.
Click to expand...
Click to collapse
Hi there,
You are welcome. Actually I didn't install CWM on my phone, I just made a Nandroid backup for it using other software.
But I can help you in your case.
Since you have TWRP, I can make a Nandroid for TWRP if you want so?
And btw, on my other thread -mentioned earlier- someone posted some info on installing CWM on HS-U980. You can do this, or wait for my TWRP backup, which is due in a couple of days. -I'm traveling right now and will be home soon-.

sgmarouf said:
Since you have TWRP, I can make a Nandroid for TWRP if you want so?
Click to expand...
Click to collapse
That would be great. I checked on the other post but the only recovery I see is the same I have (chinese TWRP).

Dasold said:
That would be great. I checked on the other post but the only recovery I see is the same I have (chinese TWRP).
Click to expand...
Click to collapse
Hi there
Just uploaded the ROM and added the links.
Please tell me if all goes well for you after you try it.

can you please add only scatter file here
thanks in advance

download link doesn't work upload it somewhere else

Brawooo said:
download link doesn't work upload it somewhere else
Click to expand...
Click to collapse
New links have been added. Mega needs to refresh links every once in a while.

hola.
tengo un hisense u980 desde hace 2 años mas o menos y esta con rom official en androdi 4.2 , tengo problemas con almacenamiento interno, siempre me da lleno y apenas puedo instalar nada, aunque tengo tarjeta sd todo el almacenaje sigue en el interno, he cambiado en ajustes la opcion de que se use la tarjeta sd pero nada.
podeis ayudarme??
quizas cambiar a otra rom? actualizar de algun modo a android 5.0?
hay alguna guia paso a paso?
porfavor ayuda.

HELP!
I download both zips, put them in sd card but when I enter in my recovery, and try to "update from zip etc" mobile says: "installation aborted".
Before this , a yellow message says, beneath all the options/tools
"primarystorage: (null)"
The pictures disappear from phone. Or i cannot see them after a reboot, they corrupt.
I can't find a solution NOR a rom.
HELP!!
---------- Post added at 08:45 PM ---------- Previous post was at 07:53 PM ----------
Installation Aborted.
error message from recovery
both zips.

Matrushko said:
I download both zips, put them in sd card but when I enter in my recovery, and try to "update from zip etc" mobile says: "installation aborted".
Before this , a yellow message says, beneath all the options/tools
"primarystorage: (null)"
The pictures disappear from phone. Or i cannot see them after a reboot, they corrupt.
I can't find a solution NOR a rom.
HELP!!
---------- Post added at 08:45 PM ---------- Previous post was at 07:53 PM ----------
Installation Aborted.
error message from recovery
both zips.
Click to expand...
Click to collapse
Did you "UNZIP" before trying to install them ??
I did mention that I zipped both files, so you should unzip/extract them before trying to install them.
Please do so, and then reply back on what happens. Good luck.

Does this rom suit QUALCOMM SNAPDRAGON processors?
Hi
is it suitable for Qualcomm snapdragon processors?
HOW to install it?
qualcom snapdragon flashtool (not mediatek) is soooo difficult and new for me.
---------- Post added at 03:08 PM ---------- Previous post was at 03:07 PM ----------
sgmarouf said:
Did you "UNZIP" before trying to install them ??
I did mention that I zipped both files, so you should unzip/extract them before trying to install them.
Please do so, and then reply back on what happens. Good luck.
Click to expand...
Click to collapse
I just tried to use the zips from recovery. Imposible. What a fool I am.
Ok, I have already unzipped, but shall I use THIS FLASH TOOLS?
https://www.youtube.com/watch?v=5qnr8bJ2Zso
THIS is my device
http://imgur.com/QxlNu6u
THANK YOU

You are not a fool. How else will you learn if you don't try things.
I wish I can answer your question but I can't. Never flashed on this phone. Just backed it up. I hope someone can help you.
However, please check this thread
https://forum.xda-developers.com/android/help/request-custom-rom-hs-u980-helpfull-t2825786
I believe people discussed flashing tools for this phone in there.

sgmarouf said:
You are not a fool. How else will you learn if you don't try things.
I wish I can answer your question but I can't. Never flashed on this phone. Just backed it up. I hope someone can help you.
However, please check this thread
https://forum.xda-developers.com/android/help/request-custom-rom-hs-u980-helpfull-t2825786
I believe people discussed flashing tools for this phone in there.
Click to expand...
Click to collapse
Well...just a way of talking.
Im not a fool, but a Stubborn android dummie that is kicking his head against the glass again and again, after 18h of trying, not solving. Not even advanced users can help me. For now.
Thanks for the link.
Now I learned that HS U98 is Snapdragon vs HS U980 which is MTK (two different processors, ergo...diff. roms)
thanks.

Question Urgency

Do you know if this method works? Https://www.google.com/amp/s/unofficialtwrp.com/twrp-350-root-galaxy-a12/?amp

I don't really know, I tried it a couple of times and I didn't really get any luck and I might know why, but you can still try it.

LAST_krypton said:
Realmente no lo sé, lo probé un par de veces y realmente no tuve suerte y podría saber por qué, pero aún puedes intentarlo.
Click to expand...
Click to collapse
What do you think was your mistake trying?

Maybe, but they never specified for what exact model it was made for.

I might try it again and see if it works, but I'm currently testing something on android 10

LAST_krypton said:
Tal vez, pero nunca especificaron para qué modelo exacto estaba hecho.
Click to expand...
Click to collapse
According to the page says for the M and F, it would be a great help if you could test it or see how its status is

I'm currently on android 10 but might switch if magisk will work.
[CLOSED] Magisk select and patch a boot image not working.
Hi guys I don't know what I'm doing wrong, but when I chose the method "select and patch a file" and select the boot.img of the AP fimware file, for some reason the "Let's Go" button is still grayed out and I can't patch the boot image. It would...
forum.xda-developers.com

LAST_krypton said:
I'm currently on android 10 but might switch if magisk will work.
[CLOSED] Magisk select and patch a boot image not working.
Hi guys I don't know what I'm doing wrong, but when I chose the method "select and patch a file" and select the boot.img of the AP fimware file, for some reason the "Let's Go" button is still grayed out and I can't patch the boot image. It would...
forum.xda-developers.com
Click to expand...
Click to collapse
Oh well if you try to flash the twrp, it would be helpful if you share here what happened, thanks

BryanCp13 said:
Oh well if you try to flash the twrp, it would be helpful if you share here what happened, thanks
Click to expand...
Click to collapse
Yea, if someone could patch the boot.img for me so I don't have to use something like gsi 11 which is buggy.

guys how do i install an original motorola kernel. because I have the original motorola kernel but I still don't know how to install it on my device

who can help me. please i'm here waiting. thanks . this was the only kernel I found for the MOTO G9 PLUS so far. anything if you can help me to recover my cell i will be grateful ok

Hi!
If your phone Is bricked u can use Smart Assistance Tool for Motorola devices. It recognize your device autodownload the last build and auto flash..
I hope u can repair!!

Matiasmora said:
Hi!
If your phone Is bricked u can use Smart Assistance Tool for Motorola devices. It recognize your device autodownload the last build and auto flash..
I hope u can repair!!
Click to expand...
Click to collapse
friend, I've done this procedure and so far nothing just has to have a single partition, that is, it was located to another partition

SmallVictor said:
friend, I've done this procedure and so far nothing just has to have a single partition, that is, it was located to another partition
Click to expand...
Click to collapse
Ummm if u have a twrp recovery or another u can chance the partitions maybe it stucks in any slot.. if hoy have a custom recovery u can reboot in the another slot of partitions

Matiasmora said:
Ummm se você tiver uma recuperação twrp ou outra, você pode arriscar as partições, talvez ela fique presa em qualquer slot .. se você tiver uma recuperação personalizada, você pode reiniciar em outro slot de partições
Click to expand...
Click to collapse
but how do i do this process

SmallVictor said:
but how do i do this process
Click to expand...
Click to collapse
If u haven't a recovery you can search in xda how to install it (twrp recovery) after you have done the recovery, with your phone off press and hold power button and volume up to enter to recovery, then go to reboot option and search for change slot if it is in b change to a and if it is in a change to b

Matiasmora said:
Hi!
If your phone Is bricked u can use Smart Assistance Tool for Motorola devices. It recognize your device autodownload the last build and auto flash..
I hope u can repair!!
Click to expand...
Click to collapse
did not work. single flash fastboot appears

SmallVictor said:
did not work. single flash fastboot appears
Click to expand...
Click to collapse
I reccommend you search in Google how to do a blank flash maybe with that u can solve it

redmi 9A no longer turns on after I wipe format in orangefox

<Moderator Edit>: English translation added to the top.
Does anyone know how to solve it, I wiped and formatted orangefox, then restarted in recovery and got a black screen help me I am Brazilian
Original:
alguém sabe como resolver, eu dei wipe e format no orangefox, depois reiniciei no recovery e fica tela preta help me I am Brazilian

does your phone boot into fastboot mode?

Gigaachad said:
does your phone boot into fastboot mode?
Click to expand...
Click to collapse
no, but I found out what it was, I hard bricked him

DARLAN_95 said:
no, but I found out what it was, I hard bricked him
Click to expand...
Click to collapse
so is your device fixed?, cause if not, I can help you cause i have recovered the same device from a hard brick.

+ or - fixing it because I don't have a pc, but I want your help tell me there

DARLAN_95 said:
+ or - fixing it because I don't have a pc, but I want your help tell me there
Click to expand...
Click to collapse
well, you'll actually need a pc to fix this....

cause in a hardbrick you don't have access to neither fastboot nor recovery. we'll have to flash it through mediatek bypass tool

Gigaachad said:
porque em um hardbrick você não tem acesso nem ao fastboot nem ao recovery. teremos que fazer o flash através da ferramenta mediatek bypass
Click to expand...
Click to collapse
I was just watching a video on YouTube, at least you don't have to open your phone

Gigaachad said:
well, you'll actually need a pc to fix this....
Click to expand...
Click to collapse
I'll see if I can get the cousin's to do this

DARLAN_95 said:
I was just watching a video on YouTube, at least you don't have to open your phone
Click to expand...
Click to collapse
yeah, you'll need tools to fix it,
REDMI+9C+NO+AUTH.zip
drive.google.com

Gigaachad said:
sim, você de ferramentas para corrigir-lo,
REDMI+9C+NO+AUTH.zip
drive.google.com
Click to expand...
Click to collapse
but it blocks the bootloader?

once you have access to a computer, install.
1. New QcomMtk_Driver_Setup_V2.0.1.1
2. libusb-win32-devel-filter-1.2.6.0
After installing libusb-win32.....) at the end of the installation there will be a check box called " launch filter installer wizard". Check the box and hit ok
A new window will appear with 3 checkboxes, click on "Install a device filter" and click next.
A new window will appear and there will be a list of ID's depending on what you have installed, now carefully observer what ID's you have.
Now connect your phone and hold the + and - button together and for second youll see the libusb window update and a new device will be added to the list, it will be named MediaTek USB Port_Vxxxx), quickly click on it and hit the install button

Gigaachad said:
assim que tiver acesso a um computador, instale.
1. Novo QcomMtk_Driver_Setup_V2.0.1.1
2. libusb-win32-devel-filter-1.2.6.0
Depois de instalar o libusb-win32.....) no final da instalação, haverá uma caixa de seleção chamada "iniciar assistente do instalador do filtro". Marque a caixa e clique em ok
Click to expand...
Click to collapse
cool continue

DARLAN_95 said:
cool continue
Click to expand...
Click to collapse
yes im updating the same post just refresh the page

Gigaachad said:
yeah, you'll need tools to fix it,
REDMI+9C+NO+AUTH.zip
drive.google.com
Click to expand...
Click to collapse
mine e redmi 9A dandelion

DARLAN_95 said:
mine e redmi 9A dandelion
Click to expand...
Click to collapse
Dont worry the procedure is same , i have tested this on redmi 9i/9A Dandelion

Gigaachad said:
Dont worry the procedure is same , i have tested this on redmi 9i/9A Dandelion
Click to expand...
Click to collapse
Beauty

do you have python installed on your pc?

Gigaachad said:
você tem o python instalado no seu pc?
Click to expand...
Click to collapse
No

DARLAN_95 said:
No
Click to expand...
Click to collapse
you'll need to install python cause we will be running a script based on it, ill guide you:
Go to this link https://www.python.org/downloads/
and click on download python 3.10.6 (assuming you are running windows)
once downloaded launch the installer
Make sure you select the “Install launcher for all users” and “Add Python 3.9 to PATH” checkboxes.
Hit install
also after installation there will be an option "disable path length limit" click on that as well.