Dear Experts,
I Unlocked the Bootloader of My Xperia L using the official Sony way. But after the successful unlocking the Phone is not booting at all. It gets stuck at the Xperia colour theme loading... I gone through various posts and found a solution that I have to Flash my phone using flashtools.
Now I instaled flashtools as well as the required drivers. However when I do the flashing in flash mode, the device disconnects automatically and flashtools says that "make sure you are not in MTP mode". I remember that My phone was in MTP mode when i was unlocking the bootloader and the USB debugging was always on... Now after unlocking bootloader the USB Debugging is showing as off (can be seen in the attached file)
After reading couple more posts about MTP ... I understand that I can't successfully flash unless the phone is out of MTP mode, and USB debugging is on. As my mobile is not booting, I can not go to the settings and tick or untick any of the two.
Please help me with a way to do it. I am attaching a screen print of the flashtools for Ref....
It will be a great relief to me....
Thanks in Advance...
You need to connect your phone is flashmode
TakuyaZ said:
You need to connect your phone is flashmode
Click to expand...
Click to collapse
Every Time I connect the phone in flash mode. once it starts flashing process, the phone automatically disconnects and comes on in normal mode.
elroyjolew said:
Every Time I connect the phone in flash mode. once it starts flashing process, the phone automatically disconnects and comes on in normal mode.
Click to expand...
Click to collapse
i have the same problem here..how can we solve this..i am using Sony Xperia C3
Knightfuryz said:
i have the same problem here..how can we solve this..i am using Sony Xperia C3
Click to expand...
Click to collapse
elroyjolew said:
Dear Experts,
I Unlocked the Bootloader of My Xperia L using the official Sony way. But after the successful unlocking the Phone is not booting at all. It gets stuck at the Xperia colour theme loading... I gone through various posts and found a solution that I have to Flash my phone using flashtools.
Now I instaled flashtools as well as the required drivers. However when I do the flashing in flash mode, the device disconnects automatically and flashtools says that "make sure you are not in MTP mode". I remember that My phone was in MTP mode when i was unlocking the bootloader and the USB debugging was always on... Now after unlocking bootloader the USB Debugging is showing as off (can be seen in the attached file)
After reading couple more posts about MTP ... I understand that I can't successfully flash unless the phone is out of MTP mode, and USB debugging is on. As my mobile is not booting, I can not go to the settings and tick or untick any of the two.
Please help me with a way to do it. I am attaching a screen print of the flashtools for Ref....
It will be a great relief to me....
Thanks in Advance...
Click to expand...
Click to collapse
Make a factory reset
TakuyaZ said:
You need to connect your phone is flashmode
Click to expand...
Click to collapse
how to connect in flashmode without using the buttons?im stock in sony logo and i need to turn on usb debugging to use flashtool
1, the adb drivers aren't installed correctly in your pc
2, don't worry about usb debugging
Just connect the phone to the computer in flash mode by pressing vol down and then plug-in the usb cable to your phone.
Flash tool will recognise it automatically if the drivers are installed correctly
3, then reinstall the stock ROM with flash tool
That's it
You said your device is being disconnected while flashing so
When you start flashing from flash tool start the flashing process
(Without connecting the phone to pc)
After the FTF is extracted flash tool will ask to connect the device
Then just connect your device in flash mode
Nikhil kuttu said:
1, the adb drivers aren't installed correctly in your pc
2, don't worry about usb debugging
Just connect the phone to the computer in flash mode by pressing vol down and then plug-in the usb cable to your phone.
Flash tool will recognise it automatically if the drivers are installed correctly
3, then reinstall the stock ROM with flash tool
That's it
You said your device is being disconnected while flashing so
When you start flashing from flash tool start the flashing process
(Without connecting the phone to pc)
After the FTF is extracted flash tool will ask to connect the device
Then just connect your device in flash mode
Click to expand...
Click to collapse
Hello,
Do you know how to install fastboot or flash mode drivers in Windows 10? Also, the flashtool for me is stuck on "please wait until the end of process", how to make it work?
Note: My device gets recognized in ADB when booted up, but does not when in fastboot or flashmode. (Plugging in cable while pressing vol. down)
Manas1796 said:
Hello,
Do you know how to install fastboot or flash mode drivers in Windows 10? Also, the flashtool for me is stuck on "please wait until the end of process", how to make it work?
Note: My device gets recognized in ADB when booted up, but does not when in fastboot or flashmode. (Plugging in cable while pressing vol. down)
Click to expand...
Click to collapse
the drivers will be on the flash tool folder just open the app then tick drivers for Xperia L (thoshan) and general fast boot drivers.
and use the latest flash tool if you can ( Now I am using a Mac so I have a flash tool which was made for apple. but I used to flash my phone using windows and this is the version of the flash tool "flashtool-0.9.18.5" and this worked fine for me ).
if anything else is needed just reply
Hey guys, I really need some help here, I'm not good at any of this stuff - my OPO just randomly got stuck on a boot loop, I have never played with the USB debugging or any of that or tried to flash anything else, I was using just stock cyanogen.
I've been reading around and I've downloaded all the drivers but still can't detect the device when I do the Shift + Right Click --> Run CMD "fastboot devices" or "adb devices".
I never enabled options such as the USB debugging or anything else, can someone please help me out? I'm really clueless to all of this stuff.
You must first put your phone in fastboot mode.
To put your phone in fastboot mode, turn it off, and then hold power+volume down until you get a screen with only the cyanogenmod logo. If you get to this screen, you're in fastboot mode. If you have installed the proper drivers in your computer, you should be able to connect to the phone from your computer. Connect your usb cable to the phone and the computer, open a dos box and type "fastboot devices". If you get a series of letters and numbers then you're OK.
jchen221 said:
Hey guys, I really need some help here, I'm not good at any of this stuff - my OPO just randomly got stuck on a boot loop, I have never played with the USB debugging or any of that or tried to flash anything else, I was using just stock cyanogen.
I've been reading around and I've downloaded all the drivers but still can't detect the device when I do the Shift + Right Click --> Run CMD "fastboot devices" or "adb devices".
I never enabled options such as the USB debugging or anything else, can someone please help me out? I'm really clueless to all of this stuff.
Click to expand...
Click to collapse
joanquro said:
You must first put your phone in fastboot mode.
To put your phone in fastboot mode, turn it off, and then hold power+volume down until you get a screen with only the cyanogenmod logo. If you get to this screen, you're in fastboot mode. If you have installed the proper drivers in your computer, you should be able to connect to the phone from your computer. Connect your usb cable to the phone and the computer, open a dos box and type "fastboot devices". If you get a series of letters and numbers then you're OK.
Click to expand...
Click to collapse
This, except that's the wrong button combo (power + volume down is for recovery). Use power + volume up to get to fastboot mode and then try the "fastboot devices" command.
Heisenberg said:
This, except that's the wrong button combo (power + volume down is for recovery). Use power + volume up to get to fastboot mode and then try the "fastboot devices" command.
Click to expand...
Click to collapse
I'm sorry for this mistake.
joanquro said:
You must first put your phone in fastboot mode.
To put your phone in fastboot mode, turn it off, and then hold power+volume down until you get a screen with only the cyanogenmod logo. If you get to this screen, you're in fastboot mode. If you have installed the proper drivers in your computer, you should be able to connect to the phone from your computer. Connect your usb cable to the phone and the computer, open a dos box and type "fastboot devices". If you get a series of letters and numbers then you're OK.
Click to expand...
Click to collapse
Thanks for your advice. This is the big problem I'm having, I've downloaded the SDK slim, and the driver manager and the 15 second installer things and installed all of them but still can't manage to detect my phone on fastboot.
jchen221 said:
Thanks for your advice. This is the big problem I'm having, I've downloaded the SDK slim, and the driver manager and the 15 second installer things and installed all of them but still can't manage to detect my phone on fastboot.
Click to expand...
Click to collapse
What command are you using while in fastboot mode?
Heisenberg said:
What command are you using while in fastboot mode?
Click to expand...
Click to collapse
I'm using both
fastboot devices
adb devices
Fastboot devices comes back with nothing in the CMD box, ADB devices gives a message that says 'Devices:' but there are none listed.
jchen221 said:
I'm using both
fastboot devices
adb devices
Fastboot devices comes back with nothing in the CMD box, ADB devices gives a message that says 'Devices:' but there are none listed.
Click to expand...
Click to collapse
There's no point in using adb commands in fastboot because only fastboot commands work. What drivers do you have installed?
XDA Moderator
Transmitted via Bacon
Heisenberg said:
There's no point in using adb commands in fastboot because only fastboot commands work. What drivers do you have installed?
XDA Moderator
Transmitted via Bacon
Click to expand...
Click to collapse
I've looked around for all sorts of drivers, I have the universal ADB, android SDK slim or something, is there a specific one I need?
jchen221 said:
I've looked around for all sorts of drivers, I have the universal ADB, android SDK slim or something, is there a specific one I need?
Click to expand...
Click to collapse
Uninstall whatever drivers you have installed, reboot your PC, install these drivers, reboot your PC, connect your phone, test fastboot (fastboot devices).
Heisenberg said:
Uninstall whatever drivers you have installed, reboot your PC, install , reboot your PC, connect your phone, test fastboot (fastboot devices).
Click to expand...
Click to collapse
I tried that, but again no response in CMD when I type fastboot devices.
Although I just tried and am able to boot into recovery mode, would I be able to do some sort of factory reset there? I've already tried to wipe user data but I'm still getting a bootloop there.
jchen221 said:
I tried that, but again no response in CMD when I type fastboot devices.
Although I just tried and am able to boot into recovery mode, would I be able to do some sort of factory reset there? I've already tried to wipe user data but I'm still getting a bootloop there.
Click to expand...
Click to collapse
I can't remember what capabilities the stock recovery has, but if it's there it's worth trying.
jchen221 said:
I tried that, but again no response in CMD when I type fastboot devices.
Although I just tried and am able to boot into recovery mode, would I be able to do some sort of factory reset there? I've already tried to wipe user data but I'm still getting a bootloop there.
Click to expand...
Click to collapse
Heisenberg said:
I can't remember what capabilities the stock recovery has, but if it's there it's worth trying.
Click to expand...
Click to collapse
I managed to get it to work after resetting a bunch of the options, thanks so much for your help with this (even if I didn't get it to fastboot mode)
I have the same problem.
jchen221 said:
I managed to get it to work after resetting a bunch of the options, thanks so much for your help with this (even if I didn't get it to fastboot mode)
Click to expand...
Click to collapse
Hey bro, I have the same problem. Can you please explain me how did you resolve it? This would be of great help. Thanks.
pavanakshay said:
Hey bro, I have the same problem. Can you please explain me how did you resolve it? This would be of great help. Thanks.
Click to expand...
Click to collapse
for me too bro same problem please help me
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
Heisenberg said:
Uninstall whatever drivers you have installed, reboot your PC, install these drivers, reboot your PC, connect your phone, test fastboot (fastboot devices).
Click to expand...
Click to collapse
i too having the same problem bro the driver link is not working please send me the link thankyou in advance
i am also facing the same problem that phone loops into fast boot mode whenever turned on i do totally every kind of drivers softwares and etc like tenorshare but all in vain i guess at last that phone must be enabled usb debuging in order to be detected as a active adb device,i pratically do this stuff by using another phone with enabled debuging and it was an active device andd can be processed further but when i disabled the usb debugging of same phone it was not working with adb interface i hope you understand,,,,but a miracle happenend i removed the battery for about a week and suddenly i pluged and try to turn it on hola it starts from roms boot logo
HELP!!!!! Stuck on bootloop and fastboot not working
i was flashing twrp on infinix s4 withfast boot. after flashing the device is stuck on bootloop. the recovery is not accessible (i press the key combo nothing happens) and fastboot combination is also not working. i tried connecting it with adb cmd and ran the command "adb reboot bootloader" but no device is detected.
ps: the link for drivers is broken
Hi,
I bricked my OnePlus One, this is not rooted.
I try this step:
- Try to recovery with OPO recovery tool: but the program not recognize my device. I install the drivers that contains into the download of OPO recovery tool, also I try with multiplies drivers, nothing works.
I can access to fastfood mode and I can access to standard recovery. But I can not access to smartphone from PC.
I am desperate, I not know what can I do
Could you help me please?
Thanks so much
Best regards
Sandra Barroso.
sandra.b.garcia.908 said:
Hi,
I bricked my OnePlus One, this is not rooted.
I try this step:
- Try to recovery with OPO recovery tool: but the program not recognize my device. I install the drivers that contains into the download of OPO recovery tool, also I try with multiplies drivers, nothing works.
I can access to fastfood mode and I can access to standard recovery. But I can not access to smartphone from PC.
I am desperate, I not know what can I do
Could you help me please?
Thanks so much
Best regards
Sandra Barroso.
Click to expand...
Click to collapse
Firstly you have to install the ADB & fastboot drivers on your PC first in order to let your PC recognize your phone.
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
How do you manage to brick your unrooted OPO anyway?
soralz said:
Firstly you have to install the ADB & fastboot drivers on your PC first in order to let your PC recognize your phone.
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
How do you manage to brick your unrooted OPO anyway?
Click to expand...
Click to collapse
Already I solved I was a problem with drivers
Solution: https://forums.oneplus.net/threads/solution-bricked-oneplus-one-recovery.306306/
(Huawei Ascend G610-U20)
I tried to install custom recovery/cwm via MUT but after reboot my device it will be bootloop or softbrick, usb debbug off but detected on pc, i dont know what to do, i try to power on and only huawei logo display then after 3second restart.... Repeat, i try to use sp flash tool but how when usb debbuging is off then when i try to connect my device to pc it will restart the phone every 3second.. Please help me, (USB DEBBUGING IS OFF)
help me
johnlegend said:
(Huawei Ascend G610-U20)
I tried to install custom recovery/cwm via MUT but after reboot my device it will be bootloop or softbrick, usb debbug off but detected on pc, i dont know what to do, i try to power on and only huawei logo display then after 3second restart.... Repeat, i try to use sp flash tool but how when usb debbuging is off then when i try to connect my device to pc it will restart the phone every 3second.. Please help me, (USB DEBBUGING IS OFF)
Click to expand...
Click to collapse
Please help me
johnlegend said:
Please help me
Click to expand...
Click to collapse
Dont use programs/tools. Use adb and fastboot.
Boot into the bootloader and type 'fastboot flash recovery recoveryname.img'
Make sure you have the driver installed correctly and you have put the recovery img in the same folder as the adb and fastboot files.
Had this problem twice before, its easy to fix. Dont cry about it.