Hello friends,
I have a problem. I can not root my device.
I tried many ways; Kingroot, OneClickroot, iROOT, KingoRoot and finally ODIN.
APKs did not work. I wanted to be rooted over the computer with ODIN. It did not work at ODIN.
The steps I followed;
1. Open Developer Mode.
2. Open the OEM lock.
3. Open USB Debug Mode.
4. Open the Device Lock. (CROM service)
My last error is:
When the device is in download mode and i try to click ODIN, On the phone screen, with a red text;
Secure check fail: cache
ODIN Message:
<OSM> Enter CS for MD5 ..
<OSM> Check MD5 .. Do not unplug the cable ..
<OSM> Please wait ..
<OSM> Checking MD5 finished Sucessfully ..
<OSM> Leave CS ..
<ID: 0/005> Odin engine v (ID: 3.1203) ..
<ID: 0/005> File analysis ..
<ID: 0/005> SetupConnection ..
<ID: 0/005> Initialzation ..
<ID: 0/005> Get PIT for mapping ..
<ID: 0/005> Firmware update start ..
<ID: 0/005> SingleDownload.
<ID: 0/005> recovery.img
<ID: 0/005> cache.img.ext4
<ID: 0/005> RQT_CLOSE !!
<ID: 0/005>
<ID: 0/005> Complete (Write) operation failed.
<OSM> All threads completed. (Succeed 0 / failed 1)
Related
Hello, since yesterday my N8000 tablet is stuck in download mode. I have not touched anything since last August when I installed the rom 4.4.2. I tried reinstalling the rom without success.
<OSM> Enter CS for MD5 ..
<OSM> Check MD5 .. Do not unplug the cable ..
<OSM> Please wait ..
<OSM> N8000XXUDNE4_N8000OXADNE4_N8000XXUDNE1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully ..
<OSM> Leave CS ..
<ID: 0/005> Odin v.3 engine (ID: 5) ..
<ID: 0/005> File analysis ..
<ID: 0/005> SetupConnection ..
<ID: 0/005> Initialzation ..
<ID: 0/005> Get PIT for mapping ..
<ID: 0/005>
<ID: 0/005> There is no PIT partition.
<OSM> All threads completed. (Succeed 0 / failed 1)
Since he speaks of Pit, I took a PIT file also tried without success:
<OSM> Enter CS for MD5 ..
<OSM> Check MD5 .. Do not unplug the cable ..
<OSM> Please wait ..
<OSM> N8000XXUDNE4_N8000OXADNE4_N8000XXUDNE1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully ..
<OSM> Leave CS ..
<ID: 0/004> Added !!
<ID: 0/004> Odin v.3 engine (ID: 4) ..
<ID: 0/004> File analysis ..
<ID: 0/004> SetupConnection ..
<ID: 0/004> Initialzation ..
<ID: 0/004> Set PIT file ..
<ID: 0/004> DO NOT TURN OFF TARGET !!
<ID: 0/004> FAIL!
<ID: 0/004>
<ID: 0/004> Re-Partition operation failed.
<OSM> All threads completed. (Succeed 0 / failed 1)
What can I do?
Sincerely Nicolas
Hello. I have a problem. I have a Samsung Galaxy S6 edge g925x demo unit. I wanted to write That the soft 1 g925f file, Which is normally the edge of S6. When I turned on the phone in bootloader mode and tried to write it with a soft by Odin is odinie see error log below .... oo Odin:
<ID: 0/004> Added !!
<OSM> Enter CS for MD5 ..
<OSM> Binary check MD5 .. Do not disconnect the cable ..
<OSM> Please wait ..
<OSM> Checking successfully completed MD5 ..
<OSM> Leave CS ..
<ID: 0/004> Odin engine v (ID: 3.1100) ..
<ID: 0/004> File Analysis ..
<ID: 0/004> SetupConnection ..
<ID: 0/004> Initialzation ..
<ID: 0/004> Download PIT for mapping ..
<ID: 0/004> Firmware start the update ..
<ID: 0/004> SingleDownload.
<ID: 0/004> boot.img
<ID: 0/004> Start NAND Record !!
<ID: 0/004> cache.img
<ID: 0/004> cm.bin
<ID: 0/004> FAIL!
<ID: 0/004>
<ID: 0/004> Complete (Write) operation failed.
<OSM> All threads completed. (Good luck 0 / failed: 1)
Now, when I try to turn on the phone or standing at the edge of the galaxy s6 log demo unit or message: An error occurred while updating function software.Use recovery unit emergency switch intelligent software. If you want to write it with intelligent software switch, to show That the model or g925x demo Lack of support Scales This program ...
I do not know what to do Help please. I'm counting on it
You probably tried to flash a firmware with a wrong region code for your phone. If it's a provider-branded one, you have to flash a firmware made for the same country and provider or it will fail at some point. Mine for example fails at "Hidden.img" when I try to flash a german O2 firmware ("VIA") over a generic german ("DBT") phone.
If you have a non-provider-branded phone, you need the generic firmware for your country.
For both possibilities, you have to get your phone back into DL mode, then flash the correct firmware with Odin.
Maybe it's possible to switch brandings, but this probably requires repartitioning which will cause all data on the phone being deleted.
Hello I have a problem with my Galaxy S6. When I want to turn so blue screen to update via smart switch. If I do give smart swtch unknown error and in download mode appears sw rev. check fail. Device: Binary 4: 3. I tried it, despite Odin, at the outset appears <ID: 0/003> Added !!
<ID: 0/003> Removed !!
<ID: 0/003> Added !!
<OSM> Enter CS for MD5 ..
<OSM> Binary Check MD5 .. Do not unplug the cable ..
<OSM> Please wait ..
<OSM> Checking MD5 finished Sucessfully ..
<OSM> Leave CS ..
<ID: 0/003> Odin in the engine (ID: 3.1100) ..
<ID: 0/003> File analysis ..
<ID: 0/003> SetupConnection ..
<ID: 0/003> Initialzation ..
<ID: 0/003> Get PIT for mapping ..
<ID: 0/003> Firmware update start ..
<ID: 0/003> SingleDownload.
<ID: 0/003> sboot.bin
<ID: 0/003> NAND Write Start !!
<ID: 0/003> FAIL!
<ID: 0/003>
<ID: 0/003> Complete (Write) operation failed.
<OSM> All threads completed. (0 succeed / fail 1).[/COLOR]
And in download mode appear again sw rev. check fail. Device: 4 Binary: 3rd
You do not know what to do ?? I still have a warranty. Thank you for your help !!
Hi, I have a galaxy note 10.1 GT-N8010
Yesterday I called it and it was in infinite loop, and I kept restarting it to see if it stopped, and then it ended up with the white screen, as if nn had an OS, So it goes into Download mode, it does not go into mode Of recovery, and ODIN gets this message
<ID: 0/005> Added !!
<ID: 0/005> Odin v.3 engine (ID: 5) ..
<ID: 0/005> File analysis ..
<ID: 0/005> SetupConnection ..
<ID: 0/005> Initialzation.
<ID: 0/005> Set PIT file ..
<ID: 0/005> DO NOT TURN OFF TARGET !!
<ID: 0/005> Get PIT for mapping ..
<ID: 0/005>
<ID: 0/005> There is no PIT partition.
<OSM> All threads completed. (Succeed 0 / failed 1)
<OSM> Enter CS for MD5 ..
<OSM> Check MD5 .. Do not unplug the cable ..
<OSM> Please wait ..
<OSM> BL_N8010XXUDNE4_1759357_REV00_user_low_ship.tar.md5 Is valid.
<OSM> Checking MD5 finished Sucessfully ..
<OSM> Leave CS ..
<ID: 0/005> Added !!
<ID: 0/005> Odin v.3 engine (ID: 5) ..
<ID: 0/005> File analysis ..
<ID: 0/005> SetupConnection ..
<ID: 0/005> Removed !!
<ID: 0/005> Can not open the serial (COM) port.
<OSM> All threads completed. (Succeed 0 / failed 1)
I tried to install the pit, and still with that same error, I tried to install the Rom 4.4 of Sammobile and continues giving this error in the odin already tenstei the last version and the version 3.07
XDA Visitor said:
Hi, I have a galaxy note 10.1 GT-N8010
Yesterday I called it and it was in infinite loop, and I kept restarting it to see if it stopped, and then it ended up with the white screen, as if nn had an OS, So it goes into Download mode, it does not go into mode Of recovery, and ODIN gets this message
<ID: 0/005> Added !!
<ID: 0/005> Odin v.3 engine (ID: 5) ..
<ID: 0/005> File analysis ..
<ID: 0/005> SetupConnection ..
<ID: 0/005> Initialzation.
<ID: 0/005> Set PIT file ..
<ID: 0/005> DO NOT TURN OFF TARGET !!
<ID: 0/005> Get PIT for mapping ..
<ID: 0/005>
<ID: 0/005> There is no PIT partition.
<OSM> All threads completed. (Succeed 0 / failed 1)
<OSM> Enter CS for MD5 ..
<OSM> Check MD5 .. Do not unplug the cable ..
<OSM> Please wait ..
<OSM> BL_N8010XXUDNE4_1759357_REV00_user_low_ship.tar.md5 Is valid.
<OSM> Checking MD5 finished Sucessfully ..
<OSM> Leave CS ..
<ID: 0/005> Added !!
<ID: 0/005> Odin v.3 engine (ID: 5) ..
<ID: 0/005> File analysis ..
<ID: 0/005> SetupConnection ..
<ID: 0/005> Removed !!
<ID: 0/005> Can not open the serial (COM) port.
<OSM> All threads completed. (Succeed 0 / failed 1)
I tried to install the pit, and still with that same error, I tried to install the Rom 4.4 of Sammobile and continues giving this error in the odin already tenstei the last version and the version 3.07
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
First, please create an XDA account so you can post in our other forums.
After that, please have a look at the Note 10.1 homepage:
http://forum.xda-developers.com/galaxy-note-10-1
You will want to post your question here:
http://forum.xda-developers.com/galaxy-note-10-1/help
Good luck and welcome to XDA!
Hello guys, I'm desperate looking for help, I recently changed my firmware to Android 7.0 official from china, but it turns out that from china not with google play installed, I've tried to root the gapps but it still doesn't work. now i want to install the firmaware from china but only from hong kong that comes with google play. It turns out that I already downloaded several odin, several firmware but still giving error.
The error that appears in odin is this:
<ID: 0/005> Added !!
<OSM> Enter CS for MD5 ..
<OSM> Check MD5 .. Do not unplug the cable ..
<OSM> Please wait ..
<OSM> Checking MD5 finished Sucessfully ..
<OSM> Leave CS ..
<ID: 0/005> Odin engine v (ID: 3.1301) ..
<ID: 0/005> File analysis ..
<ID: 0/005> Total Binary size: 3408 M
<ID: 0/005> SetupConnection ..
<ID: 0/005> Initialzation ..
<ID: 0/005> Get PIT for mapping ..
<ID: 0/005> Firmware update start ..
<ID: 0/005> NAND Write Start !!
<ID: 0/005> SingleDownload.
<ID: 0/005> sboot.bin
<ID: 0/005> FAIL!
<ID: 0/005>
<ID: 0/005> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone in dwonload mode, the following error occurs.
SECURE CHECK FAIL: (BOOTLOADER)
Please help me guys