Database Info

[Q] Firmware[ MT7_TL10 ] B122SP06

I have found this update on emui web page:
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=97
Has anyone tested on gold version?

This is China firmware and you need to install gapps in recovery mode to get the Google playservices, Playstore etc

This is custom Rom on the Versions Users:
http://cn.club.vmall.com/forum.php?...=page=1&filter=typeid&typeid=1368&typeid=1368
Very good system, I use to TL-09(you have to play gapps google)

Here's where you're wrong. The linked above is the original, your link is the custom.

Tanks a lot.
Translating from chinese it seems this Rom bring many features and improvements.
Is there an apk package to install Gapps?

For that you'll find a GApps.zip for 4.4. use. Just flash in CWM.
I use the MT7-TL10-B121-SP02A1 KangVIP, I am very satisfied. Network BETEI Beran show off.
---------- Post added at 01:45 PM ---------- Previous post was at 12:47 PM ----------
forever_free This is custom Rom on the Versions Users:
http://cn.club.vmall.com/forum.php?m...6typeid%3D1368
Very good system, I use to TL-09(you have to play gapps google)
Click to expand...
Click to collapse
Can you rom times where you can upload, lasts forever even from the side.

@up
https://mega.co.nz/#!cVIgFaqY!DYHdqy_P7vbyQ4hAyQ9Kjwr6kvhXB745N_vLT242q9g

@cdebarto
This rom is for L10? And you use it on L09?
I have also the L09, everything works good?

I already have the B119SP03(the international version) on myMT7-TL10 ...and when I try to update to B122SP06..the phone failed to update
I thought it was a prob in the package or corrupted,so I redownloaded several times from different sources but in vain !!!
any Ideas ???

stefan038 said:
@cdebarto
This rom is for L10? And you use it on L09?
I have also the L09, everything works good?
Click to expand...
Click to collapse
Yes, you can use it for the MT7-L09 and runs very well. Bring some mods.
---------- Post added at 11:30 AM ---------- Previous post was at 11:27 AM ----------
AhmadDawood said:
I already have the B119SP03(the international version) on myMT7-TL10 ...and when I try to update to B122SP06..the phone failed to update
I thought it was a prob in the package or corrupted,so I redownloaded several times from different sources but in vain !!!
any Ideas ???
Click to expand...
Click to collapse
The Rome is designed for the Asian MT7-L10 and the EU MT7-L09. Not for the EU MT7-L10! Therefore, it will not work with your device.

Fooox1 said:
Yes, you can use it for the MT7-L09 and runs very well. Bring some mods.
---------- Post added at 11:30 AM ---------- Previous post was at 11:27 AM ----------
The Rome is designed for the Asian MT7-L10 and the EU MT7-L09. Not for the EU MT7-L10! Therefore, it will not work with your device.
Click to expand...
Click to collapse
Thanks

@Fooox1
I get a error after flashing.. Process android.phone has stopped.. Did you had that error? Do you have a solution?

Not enough information! What were you doing before it which device, how to proceed?
important: should minimally 127 (MT7-L09) be on it, and in any case before making a factory reset (in recovery).

Fooox1 said:
Yes, you can use it for the MT7-L09 and runs very well. Bring some mods.
---------- Post added at 11:30 AM ---------- Previous post was at 11:27 AM ----------
The Rome is designed for the Asian MT7-L10 and the EU MT7-L09. Not for the EU MT7-L10! Therefore, it will not work with your device.
Click to expand...
Click to collapse
Fooox1 said:
Not enough information! What were you doing before it which device, how to proceed?
important: should minimally 127 (MT7-L09) be on it, and in any case before making a factory reset (in recovery).
Click to expand...
Click to collapse
I have EU MT7-L09, I was on 127 and did factory reset etc and flashed the custom rom but after I put my simcode in I get these errors, I get no errors without sim so I think it has to do with my sim or sim settings. You had no errors??

No, did not make that mistake. Question now is, it is because I have changed from 121 to 122 KangVIP right !? Flash the rom times and see what happens.
http://www.android-hilfe.de/root-cu...ate-7/644270-rom-kangvip-rom-b121-sp02a1.htmlJ
If it runs without error, the 122 (without Factory Reset) over it.

@Fooox1
Did note see there was a previous version. I will give it a try. Thank you!

Okay, I'm keeping my fingers crossed.

Fooox1 said:
Okay, I'm keeping my fingers crossed.
Click to expand...
Click to collapse
To bad. Still get this error even with the older version. Do you have 4G? I only have 3G so maybe it has to do with that.w

Then it may indeed lie on the network operator. I have 4G and am at Telekom.

B120SP04 International Version is now Available at Huawei Sites
I downloaded it and successfully installed it

How to update from 126 to 138 OTA ?

Question.
I am new to Huawei, I have the mate 9 EU dualsim version.
Read some interesting things on funky tool etc etc.
Is this the only way to update this phone?
Hisuite ROM flash is grey... Copy update.app OTA or full 138 to SD card or dload folder etc etc ..
Basically I want to update from 126 to 138 fw.
Can someone give me a tip how?
Greets Remy
Amsterdam.

Huawei has been pushing updates really slow for some regions. I was still on 110. FunkyHuawei is very easy to use. I updated my phone in less than 15 minutes using it.

funky
Nitemare3219 said:
Huawei has been pushing updates really slow for some regions. I was still on 110. FunkyHuawei is very easy to use. I updated my phone in less than 15 minutes using it.
Click to expand...
Click to collapse
oke... so u did a update by funky?
or a restore?
without factory reset?

escobar035 said:
oke... so u did a update by funky?
or a restore?
without factory reset?
Click to expand...
Click to collapse
Funky will download the entire factory image for the version/region you choose. eRecovery will flash the image which updates the software just like an OTA, it's just a larger download. It does not factory reset or lose any settings.

Thanx! Will try tonight

escobar035 said:
Thanx! Will try tonight
Click to expand...
Click to collapse
FYI, if you are looking to update to B138, you can't use eRecovery (as of December 29, anyway, it's still not an official update, might change in the future), you must use HiSuite, but this will also not wipe your device. Still, I suggest you make a backup in case there is some issue. You never know what could happen.

Netherlands OTA B138 just came in a minute ago, all good. The 6x zoom is still there so we'll have to wait some more for 10x.

blackspp said:
Netherlands OTA B138 just came in a minute ago, all good. The 6x zoom is still there so we'll have to wait some more for 10x.
Click to expand...
Click to collapse
Nothing here... Tmobile Holland
Sent from my MHA-L29 using XDA-Developers mobile app

blackspp said:
Netherlands OTA B138 just came in a minute ago, all good. The 6x zoom is still there so we'll have to wait some more for 10x.
Click to expand...
Click to collapse
Nothing here in UK EE carrier
Who is your carrier there in the Netherlands?

lawtq said:
Nothing here in UK EE carrier
Who is your carrier there in the Netherlands?
Click to expand...
Click to collapse
KPN
---------- Post added at 03:37 PM ---------- Previous post was at 03:35 PM ----------
Btw, I'm not sure what they did at huawei but battery life seems even better than before. If Ben on my phone almost constantly since this morning and I'm at 79%. Which is onheard of good!!

blackspp said:
KPN
---------- Post added at 03:37 PM ---------- Previous post was at 03:35 PM ----------
Btw, I'm not sure what they did at huawei but battery life seems even better than before. If Ben on my phone almost constantly since this morning and I'm at 79%. Which is onheard of good!!
Click to expand...
Click to collapse
Well, its in the change log, decreased power usage lol. Good

lawtq said:
Well, its in the change log, decreased power usage lol. Good
Click to expand...
Click to collapse
Yr funny

blackspp said:
KPN
Click to expand...
Click to collapse
No update here just yet, same as 126, took more than a week after the first messages from users in NL. Also KPN but I don't think that makes any difference.

So slow isn't it. I hope we don't have to wait a week

djmvt said:
No update here just yet, same as 126, took more than a week after the first messages from users in NL. Also KPN but I don't think that makes any difference.
Click to expand...
Click to collapse
Got my B138 update this afternoon. OTA`s are beeing distributed based on IMEI numbers

gee2012 said:
Got my B138 update this afternoon. OTA`s are beeing distributed based on IMEI numbers
Click to expand...
Click to collapse
@duraaraa if that is the case, how would we get the ota, meaning us who changed the region to c432 from c185 or else.. Any ideas or suggestions here..
On the other hand, does that mean changing the dns to urs will get me the ota update normally via the updater and will change the build number to 138 since Huawei servers started authenticating this update? Please your input appreciated..

Amjad.AbdulGhani said:
@duraaraa
On the other hand, does that mean changing the dns to urs will get me the ota update normally via the updater and will change the build number to 138 since Huawei servers started authenticating this update? Please your input appreciated..
Click to expand...
Click to collapse
tried that just now, it downloaded B138, but failed in recovery.

Nisam Mate said:
tried that just now, it downloaded B138, but failed in recovery.
Click to expand...
Click to collapse
@duraaraa replied to this post indirectly but at his funkky thread, so mainly NO for us who converted, and we have to use funkky, he is working on it.. I wonder then, why did we rebrand then!!!

All of the non-Chinese versions are only pushing OTAs to approved sim cards. Rebranding actually has nothing to do with it. From what I can tell, it's the SIM card. So if you have a Malaysia sim card you can get update C636B136, but you cannot get it with Singapore SIM card. Some European sim cards let you get B138 right now, and some don't.
The IMEI is not based on the IMEI of the phone, apparently, but it has to do with the sim card inserted into the phone. It's odd that Huawei chose to do it this way, but I'm investigating. I have found a way around it with FunkyHuawei, but it is unclear when or if Huawei will make a full roll-out for non-Chinese phones.
---------- Post added at 02:23 PM ---------- Previous post was at 02:22 PM ----------
Nisam Mate said:
tried that just now, it downloaded B138, but failed in recovery.
Click to expand...
Click to collapse
B138 right now is for HiSuite only. Within the next few days I will launch B138 for eRecovery.

duraaraa said:
All of the non-Chinese versions are only pushing OTAs to approved sim cards. Rebranding actually has nothing to do with it. From what I can tell, it's the SIM card. So if you have a Malaysia sim card you can get update C636B136, but you cannot get it with Singapore SIM card. Some European sim cards let you get B138 right now, and some don't.
The IMEI is not based on the IMEI of the phone, apparently, but it has to do with the sim card inserted into the phone. It's odd that Huawei chose to do it this way, but I'm investigating. I have found a way around it with FunkyHuawei, but it is unclear when or if Huawei will make a full roll-out for non-Chinese phones.
---------- Post added at 02:23 PM ---------- Previous post was at 02:22 PM ----------
B138 right now is for HiSuite only. Within the next few days I will launch B138 for eRecovery.
Click to expand...
Click to collapse
thanks .) you did.. I made a stupid mistake of trying to downgrade to B126.. well I am back luckily now, if you only pushed new B138 few hours earlier while I was fighting with eRecovery

Honor 6x [BLN-L21C185] What's your current Update version?

Couple of questions, it would seem that the Honor 6x [Middle East version] has not received the complete Emui 5 update, twin apps are unavailable. As a Matter of fact it also hasn't received the August Security Updates yet. Can anyone with the C185 version's confirm this for me?
Would alsonbe appreciated if other version users could also confirm this for me. Thanks

B340

I haven't gotten security updates since the March one. What are twin apps? I'm using the US version I think.

B361, the update that came out in June I think, and yes it's full of bugs like my standby time drops form 60 hours to 19 hours after a week or so and then I have to factory reset (I've done all the usual things to prevent it but it suddenly drops :/), it has no app twin feature as the OP said, it's frustrating as the other regions are getting consistent updates and bug fixes but not c185 it's baffling -_-
---------- Post added at 08:15 AM ---------- Previous post was at 08:12 AM ----------
Also the Rom is Laggy, the performance in games is the worst, the cell reception is weak as campared to the MM Rom that it came with, and the worse part is you can't roll back to MM now :/, firmware finder shows a b371 update that was made on 15th of August but it hasn't been released, but it's just the security updates nothing more

PloniAlmoni said:
I haven't gotten security updates since the March one. What are twin apps? I'm using the US version I think.
Click to expand...
Click to collapse
Twin app is using an app with 2 different accounts (whatsapp for example), it is like parallel space if you know it

PalakMi said:
Twin app is using an app with 2 different accounts (whatsapp for example), it is like parallel space if you know it
Click to expand...
Click to collapse
I only have one account, so I haven't missed that.

PloniAlmoni said:
I only have one account, so I haven't missed that.
Click to expand...
Click to collapse
Go to settings and see if you have twin apps there

PalakMi said:
Go to settings and see if you have twin apps there
Click to expand...
Click to collapse
What's it called there and where is it supposed to be located?

PloniAlmoni said:
What's it called there and where is it supposed to be located?
Click to expand...
Click to collapse
Look, it's under battery

I don't have it either then.
---------- Post added at 06:23 AM ---------- Previous post was at 06:16 AM ----------
Could this mean I'm not getting Oreo either?!

No, there are some updates for the 6x that don't have twin app, wait for an update and it should be available

PloniAlmoni said:
What's it called there and where is it supposed to be located?
Click to expand...
Click to collapse
Edit- Did not see this was already responded.
It is called twin app only.
---------- Post added at 03:13 PM ---------- Previous post was at 03:10 PM ----------
PloniAlmoni said:
I don't have it either then.
---------- Post added at 06:23 AM ---------- Previous post was at 06:16 AM ----------
Could this mean I'm not getting Oreo either?!
Click to expand...
Click to collapse
did you flash the update manually? or tried rebranding it?

shashank1320 said:
Edit- Did not see this was already responded.
It is called twin app only.
---------- Post added at 03:13 PM ---------- Previous post was at 03:10 PM ----------
did you flash the update manually? or tried rebranding it?
Click to expand...
Click to collapse
No to both. At present, I don't have a computer to do that on.

I guess you should be on the latest update to get twin app for the 6x

PloniAlmoni said:
No to both. At present, I don't have a computer to do that on.
Click to expand...
Click to collapse
Twin app is by default on Nougat for most of the devices (if I am not wrong)
Use this to get this feature and see if it makes any different- https://www.xda-developers.com/how-to-clone-any-application-with-emuis-app-twin-feature-no-root/

I'm using a B24 device. Do you think Huawei will hold up updates for it? What is B24, US?
---------- Post added at 09:36 AM ---------- Previous post was at 09:33 AM ----------
shashank1320 said:
Twin app is by default on Nougat for most of the devices (if I am not wrong)
Use this to get this feature and see if it makes any different- https://www.xda-developers.com/how-to-clone-any-application-with-emuis-app-twin-feature-no-root/
Click to expand...
Click to collapse
I think that needs a computer with adb on it.

PloniAlmoni said:
I'm using a B24 device. Do you think Huawei will hold up updates for it? What is B24, US?
---------- Post added at 09:36 AM ---------- Previous post was at 09:33 AM ----------
I think that needs a computer with adb on it.
Click to expand...
Click to collapse
Yes it will require pc with adb.
---------- Post added at 03:44 PM ---------- Previous post was at 03:43 PM ----------
PloniAlmoni said:
I'm using a B24 device. Do you think Huawei will hold up updates for it? What is B24, US?.
Click to expand...
Click to collapse
Yes US one.

Until you get twin app, try parallel space in meanwhile, if you really need it

Really don't understand why 6X is missing twin app feature.

I think the first OTAs of the 6x don't include twin app, maybe the latest ones do

Beta (Oreo) in Germany available

The Beta registration can be done in Members app.
I did it and it is installing.
See screenshot

good news
xxxPLETTIxxx said:
The Beta registration can be done in Members app.
Click to expand...
Click to collapse
can you describe it with more details? (can't find such area in this app )

ayaromenok said:
good news
can you describe it with more details? (can't find such area in this app )
Click to expand...
Click to collapse
Go for the section "hints", it was the only one visible in my case. When selected, hit the big picture (I can't recreate it, otherwise I would have added a screenshot)

I see it too for France registration

Yea, finally
Gesendet von meinem SM-G950F mit Tapatalk

Darkcrystal38 said:
I see it too for France registration
Click to expand...
Click to collapse
Can you register ?
Did you bought your phone from a phone operator or no?
I bought my phone from Bouygues Telecom and I don't have anything :/

KilyanP said:
Can you register ?
Did you bought your phone from a phone operator or no?
I bought my phone from Bouygues Telecom and I don't have anything :/
Click to expand...
Click to collapse
It is only for unlocked Phones, if the phone is branded means no beta.
---------- Post added at 03:40 PM ---------- Previous post was at 03:37 PM ----------
Which Beta do you think is it guys ?
Are we on par with the US/UK and Beta 4 ?

KilyanP said:
Can you register ?
Did you bought your phone from a phone operator or no?
I bought my phone from Bouygues Telecom and I don't have anything :/
Click to expand...
Click to collapse
yes i registred and update immediately after.
I am flashing now the update.
Mine is no operator, but Bouygues cell phones is not lock?

Darkcrystal38 said:
yes i registred and update immediately after.
I am flashing now the update.
Mine is no operator, but Bouygues cell phones is not lock?
Click to expand...
Click to collapse
Nope, mine isn't locked, but I don't have the beta, I'm gonna flash an unbranded firmware to see

KilyanP said:
Nope, mine isn't locked, but I don't have the beta, I'm gonna flash an unbranded firmware to see
Click to expand...
Click to collapse
Yes try it , before that i always flashed the lastest update by Odin.

kaliberx said:
It is only for unlocked Phones, if the phone is branded means no beta.
---------- Post added at 03:40 PM ---------- Previous post was at 03:37 PM ----------
Which Beta do you think is it guys ?
Are we on par with the US/UK and Beta 4 ?
Click to expand...
Click to collapse
Rubbish. My S8 is locked on Vodafone UK and I still installed Oreo Beta just fine. All is needed is to flash unbranded firmware via Odin. Carrier lock has nothing to do with Beta program eligibility.

vladimir_carlan said:
Rubbish. My S8 is locked on Vodafone UK and I still installed Oreo Beta just fine. All is needed is to flash unbranded firmware via Odin. Carrier lock has nothing to do with Beta program eligibility.
Click to expand...
Click to collapse
He probably meant that tbf, he did mention the branded firmware part of it but yes as you said the sim lock status does not matter

Hi, Is it possible to register at this moment ?

Is it possible to install the room and register?

Darkcrystal38 said:
Yes try it , before that i always flashed the lastest update by Odin.
Click to expand...
Click to collapse
I just did it, but still got nothing on the Members App, I don't understand...
Edit: Well, I flashed an unbranded firmware but when I check the firmware info from my Phone it says "BOG" which is the code of my operator, did I missed something ?

DBT/DBT/DBT works
First code you can change with the factory rom and *#243203855#.
Second is the active csc of the flashed Firmware.
Third depends of your simcard.

What update is everyone on in the UK?

Standard P30's only *(Not Pro or Lite)
Carrier: EE
Update: .193 August Sec Patch

223 sep security patch

fazalkamal30 said:
223 sep security patch
Click to expand...
Click to collapse
Carrier?

*Detection* said:
Carrier?
Click to expand...
Click to collapse
Open

fazalkamal30 said:
Open
Click to expand...
Click to collapse
Huh? Which carrier is your SIM with?

Arrived today...
Model, ELE L09 C431
---------- Post added at 10:13 AM ---------- Previous post was at 10:11 AM ----------
*Detection* said:
Huh? Which carrier is your SIM with?
Click to expand...
Click to collapse
My model is not carrier bound..

fazalkamal30 said:
Arrived today...
Model, ELE L09 C431
---------- Post added at 10:13 AM ---------- Previous post was at 10:11 AM ----------
My model is not carrier bound..
Click to expand...
Click to collapse
Doesn't matter if it's not carrier bound, I asked which carrier your SIM is with....
Why avoid the answer?

*Detection* said:
Doesn't matter if it's not carrier bound, I asked which carrier your SIM is with....
Mobilink, I am using it in Pakistan.
Click to expand...
Click to collapse

fazalkamal30 said:
*Detection* said:
Doesn't matter if it's not carrier bound, I asked which carrier your SIM is with....
Mobilink, I am using it in Pakistan.
Click to expand...
Click to collapse
Thread title states "In the UK"
Click to expand...
Click to collapse

*Detection* said:
fazalkamal30 said:
I bought it from UK..
Click to expand...
Click to collapse
Click to expand...
Click to collapse

yesterday i have received 9.1.0.240
sim vodafone, uk, phone was from O2

9.1.0.24
Unlocked Phone
O2 SIM