hi. i have note 5 n920p and i can't access to lte/4g when i select to LTE/CDMA MY signal gone . i am from iran.
my sim suport 4g but on my device, i only use 3g. i use android 7
i instal RDIO SWITCH BUT NO CHANGE.
and i have every min massege from "Hands Free Activation" what is this? how can FIX it?
Related
I have this problem since the first day of Samsung Galaxy Pocket purchasing. Not quite sure that it is a hardware, software or network problem. Please suggest if you have any idea.
(Sorry I just notice I put wrong model name in Title, the phone in question is Samsung Galaxy Pocket (S5300) not Galaxy Plus).
My SGP data (HSPA) will stop (no movement of data icon in status bar, no network connection response from all network relate application) after I enable packet data and set network mode to GSM/WCDMA (this will make SGP to clamp on 3G most of the time) and leave it for 8-10 hours. My mobile network operator operate both GSM and WCDMA/HSPA with same network code and frequency band.
I tried to upgrade firmware (Stock), claim a new phone, flash custom ROM (Hyperion 1x and 2x) but still got the same problem.
Anyone having same problem or have any suggestion?
By default the Network Mode is on LTE/WCDMA/GSM (Auto) mode but when I switch on mobile data, nothing shows up, no data connection. And sometimes even no voice service, it shows "emergency calls only".
But when I switch to GSM only mode, EDGE connection shows up (which is normal), Internet goes normal but very slow with EDGE connection (Sometime GPRS).
I tried to swap SIM with my friend, and their SIM works fine with my phone under LTE/WCDMA/GSM (Auto) mode and I do get HSPA and HSPA+ Signal. (Network provider setting changed to their network provider)
I contact my network provider and they said my SIM has no problem, they did insert my SIM into their device and found no problem with my SIM on their device, they get HSPA+ signal with my SIM. And they ask me to take my phone to check for hardware failure.
I checked the APNs and network provider setting, reset back to Stock ROM and clean install my ROM several times, still have no luck
My subscription do have HSPA connection and has been using it for months at the same location, but now it just stay at EDGE and GPRS only.
Is that really a hardware problem? Or could it be SIM problem?
Device Info:
Device: Samsung Galaxy Ace 3 LTE (S7275R)
ROM: CM13-20160315build
Recovery: TWRP 3.0.0.0
Xposed: Xposed v80 sdk23 arm
Network Provider: redONE
Hui0531 said:
By default the Network Mode is on LTE/WCDMA/GSM (Auto) mode but when I switch on mobile data, nothing shows up, no data connection. And sometimes even no voice service, it shows "emergency calls only".
But when I switch to GSM only mode, EDGE connection shows up (which is normal), Internet goes normal but very slow with EDGE connection (Sometime GPRS).
I tried to swap SIM with my friend, and their SIM works fine with my phone under LTE/WCDMA/GSM (Auto) mode and I do get HSPA and HSPA+ Signal. (Network provider setting changed to their network provider)
I contact my network provider and they said my SIM has no problem, they did insert my SIM into their device and found no problem with my SIM on their device, they get HSPA+ signal with my SIM. And they ask me to take my phone to check for hardware failure.
I checked the APNs and network provider setting, reset back to Stock ROM and clean install my ROM several times, still have no luck
My subscription do have HSPA connection and has been using it for months at the same location, but now it just stay at EDGE and GPRS only.
Is that really a hardware problem? Or could it be SIM problem?
Device Info:
Device: Samsung Galaxy Ace 3 LTE (S7275R)
ROM: CM13-20160315build
Recovery: TWRP 3.0.0.0
Xposed: Xposed v80 sdk23 arm
Network Provider: redONE
Click to expand...
Click to collapse
I have exactly the same problem! Same ROM as well. Update to various CM13 releases, factory reset to stock kernel and rom but nothing helps.
I installed the APK and the Problem for "SIM from unknown source" is ressolved. But i need help with few more things please.
1) the Data service will not work only incoming and outgoing is working.
2) i want to upgrade the OS , it is stuck on 4.2.2 . How can i do that.
I have a Casio G'zOne Commando 4G LTE C811 (Verizon Wireless)
And i am using it india with Vodafone Carrier.
also tried the step , first Enable the Mobile Data , Then Enable the Airplane mode, Then after 5 mins disable the Airplane mode. But no good it remains on the plain network bars. no Edge or 3G or 4G signs no Data connection Arrows.
.
Please help .
Regards,
Dinu Gaikwad
Mobile :+919819455014.
Email:[email protected]
BB Pin: 2BE6C17C
Hi Everyone,
I have Huawei Honor 10 Lite (Model : HRY-LX2)
I'm in Yemen.
It works directly on GSM networks but , It can't work on CDMA network
I need to force this device to work on CDMA ( Yemen Mobile Carrier 800MHZ ).
the mobile signal is full and the carrier name appears but It work (4G LTE data only ) by using 4G SIM card but give me SOS only when I use 3G Sim card.
I cannot make any call from CDMA 4G SIM card just use it's mobile data , I need to make it work on 3G signal I think the problem is in frequency Bands .
I notice on gsmarena.com the HRY-LX2 isn't work on CDMA so I convert the phone firmware to HRY-AL00 which work on CDMA the pictures in attachments but I get the same result, also I use SetEdit.apk to show the hidden network mode but when I choose CDMA mode It return directly to GSM,WCDMA,LTE Auto .
I hope you will give me the solution.
I use a Realme GT Master Edition as my primary device, got a Galaxy Watch 4 LTE today after pairing it up tried setting up the mobile plan and got an error
My network is Jio (India)
When on 5g the wearable app gives error code 5000
When on 4g it gives error code 4001
Any fix for this issue? Messes up the whole functionality of the lte version
Insomniac05 said:
I use a Realme GT Master Edition as my primary device, got a Galaxy Watch 4 LTE today after pairing it up tried setting up the mobile plan and got an error
My network is Jio (India)
When on 5g the wearable app gives error code 5000
When on 4g it gives error code 4001
Any fix for this issue? Messes up the whole functionality of the lte version
Click to expand...
Click to collapse
Turns out you need a galaxy device to set-up the cellular plan
1. Put your sim in a galaxy mobile then pair your watch to it
2. Setup the watch and activate your cellular plan on the watch
3. Wait to get the full network functionality on the watch then take a backup and reset your watch
4. Put your sim back to your original mobile and pair the watch with it
5. Setup the watch and restore your backup
Cellular plan should be working now