I begin by apologizing if it is not the correct place to post.
I have a problem, I have a smartphone orro and it appears the 2G / 3G incone next to the network signal. Even if I activate the mobile data, also appear the signal above the network signal, as usual: H + or 3G.
I wanted to remove those large icons that appear next to the network signal, thus leaving only the traditional icons to appear on the network icon.
Look at the image in the gdrive.
https://drive.google.com/open?id=0B3FH7u3M58DRV3Fsc0QzVXdzSlE
The android version is 5.1.
Thank you. :highfive:
If the option is not available in your device settings you'll need an external tool. Browse the app store for a status bar editor and if you want to dive deep you certainly do it with root.
Related
A work colleague is using a sim free touch cruise on the vodafone network but vodafone don't have any support for this device (mind you neither does HTC ). We got the vodafone settings for billpay vodafone off the internet and input them and can now surf, download gmail etc over HSDPA (H icon shows) and then it automatically reverts to 3G when not in use.
The problem is that the icon for 3G/umts in use is always on (ie the small 3G over the signal strength) and when the bigger 3G icon is touched it shows how long connected to 3G and as the device is still connected it keeps counting time even though the application using 3G is shut down.
My questions are as follows:
In this state (big 3G icon showing and small 3G icon above signal strenght) is this costing anything being constantly connected to 3G but not using it?
How can it be set to automatically disconnect?
My own touch cruise is on the 3 network but I don't have this difficulty.
My thinking is that it might have something to do with "vodafone live" but not sure what is happening or possibly have selected the wrong set of settings for vodafone ireland as there is a few different sets.
Sorry this is a bit long winded but any advice much appreciated.
The always ON connection is general behaviour... it doesn't matter which network is the device on.
The big 3G/H icons only represent the available network (G(PRS)/E(DGE)/3G/H(SDPA))
The smaller is the signal strength...
The cost of the always ON connection depends on the dataplan being used... if it's an unlimited or a fairly large one like 5GB, it won't matter... but it realy depends on the data recieved....
In my case the avarage hourly traffic is around 1 MB, but i have a little e-mail traffic going so... whith a few mails and every 30 minute checking the traffic should be around 500 KB or lower...
As for the Auto-Disconnect, please search the forum... there are several threads about this in both subforums.
Thats great gnick666 thanks for your reply.
I know the Advanced Configuration Tool has an auto disconnect feature, but I had some issues with it and never went back to go play around with it.
You can also hold down the End button and a menu pops up and you can end data connection there. Or alternatively you can configure it so that holding down the End button always disconnects your data connection.
I have an unlimited data plan so not worried about data, I'm not sure however what the impact to battery usage is so I disconnect "just in case".
As for the 3G / H icon behaviors. Depending on which part of the country I'm in, I get different icons. Sometimes I get 3G and it switches to H when doing data. Othertimes it's always H whether disconnected or connected. (This is assuming that I'm in a 3G location) and not switching back to Edge.
Mine mostly shows the bigger 3G icon and the signal strenght icon with the little antenna icon (I'm on the 3 network which is 3g) but when I download data the small icon changes to 3G and then both change to H as required. Once finished it disconnects and reverts back to 3G. I have Schapps Advanced config tool installed.
EDIT: Seems when the data services setting is on the phone behaves differently. - Thanks for the input.
Hello all, I am new to this group. Ive learned a lot, and I'm able to get around pretty good as a result of what I've learned here so thanks to you all.
I use SRINT - I have an HTC touch pro2. I've never had a good signal in my home as it's in one of those area's where there is no coverage accoridng to their map. However, I usually have a good enough signal to do most everthing I need to do but still low end..
Yesteray I noticed my 'EV" icon for the first time. Then it went into roaming mode w/ 1xrtt. Never saw this icon either. Today, same thing - except I'm not going into roam mode to often. I don't see any new sattelites up in my area. I have no "signal" icon so there aren't any bars. I'm recieving calls and the reception is incredibly good. However since all I have is the EV, I can't tell what my signal strength is. Can anyone explain this behavior?. I thought I might of hit some buttons accidently and changed some setting unkowingly. thanks
What does satellite have anything to do with cellular coverage. Why don't you have a signal icon? Did you install some weird taskbar? Sounds to me you re just on the edge of 3g so you see ev or 1x. Also 1x isn't roaming it just not 3g data speeds
I don't know. that's why I was asking. I haven't installed anything but Bing and Google maps. When I go into settings->turn on data services, the signal goes out and EV lights up with data transfer showing. Shut off data services, I get my icon back with one bar, EV icon on no data transfer showing. Have no clue what it's doing yet, exc;ept I see no difference in e,ail, internet , messaging, regardless if "data services" are on or off. If I go into "roam" i.e. the roam ICON lights up, then 1x icon is on instead of EV. NOW.. I turned data services off, I got my signal icon. I update the local weather, and the signal icon goes out EV lights up showing data exchange, I look at my seetings and data services is on. Probabaly turned on when I forced the weather to update.
This is so confusing but it sounds like everything is working fine to me. Screen captures of these changes would help because your descriptions are confusing to me.
the question is, why i see both 3g and wifi icons on the status bar at the same time? i mean, wich one is the one i using it when both are on the status bar? do i lost my MB from my data network while i'm using the wifi?
You see both because they're both available. However, the phone will prefer to use WiFi whenever it's connected. If you had a long-running connection over 3G, it might stay on the 3G, and I think some types of data always go over 3G (MMS? But that shouldn't use data plan limit anyhow). Also, just because the WiFi icon shows doesn't mean it's usable; if the WiFi connection is unable to reach the Internet for some reason, the phone will fall back to using 3G.
Sometimes it's possible that the phone uses 3G even though it is connected to a Wifi network. I recognize this, when the 3G Icon turns to 3G+.
I've noticed my Focus Flash tends to use 3G always for push email whereas the browser and market place tends to use WiFi if both are available. Don't know what the situation is for other apps.
@Der Moloch: That's not what "3G+" means at all. It means your phone is connected to a "faster than 3G" technology, probably HSPA+. Although some carriers (and phones) refer to this as "4G", and some phones will just put "H" or "H+" there instead, it all means the same thing. If you go dig into the registry, you can see the list of text that the phone displays for different wireless data technology connections.
@GoodDayToDie
My 3G symbol only changes to 3G+, when there is an actual data transfer.
That's... REALLY weird. I haven't heard of anybody reporting that experience before. The registry values I mentioned are in HKLM\Software\Microsoft\Connectivity\CellularUX\DataConnectionIcon. None of the options on my phone are "3G+" but then, my phone doesn't support a "3.5G" network technology like HSPA+ either...
My device also shows 3G+ sometimes when it is available.If not just 3G.
---------- Post added at 09:40 PM ---------- Previous post was at 09:38 PM ----------
What do you mean by data transfer?
@Ttblondey
When I say data transfer, I mean that the phone is actually submitting something through the data connection.
For example, I have my mail sync set to manual. I open up the e-mail interface of my Windows phone. On the top right there is the digital clock. If I put my finger on it, the battery icon and the 3G icon (with the reception bars next to it) show up. Then I press sync and the 3G icon changes to 3G+. Once the sync is done, it changes back to 3G.
Maybe I'll upload a video about that, once I am back at my place and have access to a webcam.
You're seeing the phone switch to HSPA+ when it needs to, and back off to HSPA when there's no data being transferred.
It's a power saving thing.
Exactly and this confirms my post above regarding the wireless situation.
Some time ago I read about a setting that showed the mobile connection type - 4G etc - against the signal strength symbol at the top of the screen. I tried this and have the name shown there now.
But I've decided I'd rather not have the name there and want to take it off. But I can't find the setting any more.
Where is the setting please?
OK I found it. This is a setting in Developer Options to keep mobile data on when connected to WiFi.
Hello! I'm in search of a signal manipulation app, if one even exists.
Why? I don't have a sim card in my phone, so I'd like to have the signal bars show me a "placebo" cellular signal strength. Is this possible to do without masking the icon?
I know that phones that have the status-bar demo mode shows the cellular signal as full/or sometimes empty, so is it possible to have an app control what signal icon is shown on it's own, so that I don't have to see the "No SIM" icon or an empty signal?
(NOTE: I have disabled the "No SIM" icon under System UI Tuner, but it doesn't feel right without cellular signal bars being there.)