{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I present nearly fully working build of SailfishOS.
Disclamer
I'm not responsible for any issues, problems, or broken phones, which may have come from using any data or information you receive from this thread. Using anything here, will most likely violate your cell phone's warranty or contract. That is also your 100% responsibility, to know, and your responsibilty if you do. If you don't know what you are doing, or you think you do, and you brick your phone, or something POSITIVE OR NEGATIVE changes with your phone, it is all 100% your responsibility. Use the following data, information, and links at YOUR OWN RISK!
Download link:
- beta 26
- beta 17
- beta 13
- beta 11 with dual sim
- beta 9
- beta 6 - GDrive
Download link to base:
- Base CM13
Install instruction:
1. Clean install Cyanogenmod 13 (can be used previously rom if its cm13 and around 1gb free space on data partition)
2. Flash Sailfish rom zip (don't use Squid's TWRP. File compressor there has been altered and produces errors while unpacking. thanks 8sync)
3. Reboot to system(can take some time)
Warning!
When install via zip you will lose all data created in sailfish directory!
Currently XT1526 is not suported because of diffrent partition table.
Device with dual sim version is work in progress
What work:
- Wifi (fixed and forced to load wlan module if possible)
- Call
- Transmision over 3G
- Touch
- Vibration
- Audio
- Bluetooth (little buggy, sometimes reject to turn on/off)
- Video playback
- Jack port (headphones)
- Camera (cannot record video)
- MTP switch (if u cannot change to other USB mode: reboot device with unpluged cable and then cahnge mode and plug cable)
- RIL in dualsim(WIP, need to test on clean install)
What doesn't work:
- Store (waiting for approve)
- U will tell me ^-^
If you appreciate my work and want to support future development u can always donate
XDA:DevDB Information
SailfishOS 2.1.0.10, ROM for the Moto E 2015
Contributors
wiktorek140, mer-hybris
Source Code: https://github.com/wiktorek140
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: CyanogenMod 13
Based On: Sailfish/Jolla
Version Information
Status: Beta
Created 2017-06-17
Last Updated 2017-07-24
Screenshots
Screenshots thanks by B4RON
There's any way to install apps? Even the stock apps isn't possible to install from store.
Use Warehouse for Sailfish (https://openrepos.net/content/basil/warehouse-sailfishos).
First enable installing custom apps in settings then download via browser and install
BTW, quick note, don't use Squid's TWRP with SailfishOS installer. File compressor there has been altered and produces errors while unpacking.
First, thanks for compiling sailfish for the surnia. It is a different experience from which we are accustomed in android. No lags or crashes in my experience.
Bugs I've noticed so far:
-MTP don't work, only charge. (I already changed the settings but it did not work);
-Ril does not work;
-I can not install apps from the store. (downloaded warehouse)
Device: XT1514
Build: Beta 9
Screenshots:
For my type of use, the buid 9 is almost perfect, the only problem i found is the headphones that didn't work, but this rom is prety stable for an beta release, amazing work you done.
I can't find what wrong with headphones and headphones.
Whay do you mean ril? Data transmision dont work or sms or something else?
wiktorek140 said:
I can't find what wrong with headphones and headphones.
Whay do you mean ril? Data transmision dont work or sms or something else?
Click to expand...
Click to collapse
The sim card doesn't get recognized. Maybe the cause is my surnia variant being dual chip.
B4RON said:
The sim card doesn't get recognized. Maybe the cause is my surnia variant being dual chip.
Click to expand...
Click to collapse
Hmm dualsim surnia with lte? Nice, if u want i will try to make build with dualsim support
wiktorek140 said:
Hmm dualsim surnia with lte? Nice, if u want i will try to make build with dualsim support
Click to expand...
Click to collapse
I would appreciate it. This bug is the only thing that prevents me from using Sailfish Os as daily driver.
Please man!!! Fix minijack, now earphones doesnt work. Cant live without them?
mmandro25 said:
Please man!!! Fix minijack, now earphones doesnt work. Cant live without them?
Click to expand...
Click to collapse
Are they work previously?
wiktorek140 said:
Are they work previously?
Click to expand...
Click to collapse
on sailfish nope. I've tried beta 9. But sure it works on android ROMs
wiktorek140 said:
Are they work previously?
Click to expand...
Click to collapse
I tried build 9 and 6 and the same problem.
I will provide next release with working headphones.
For more techy there is fast fix:
Code:
cd /etc/ohm/plugins.d/
touch accessories.ini
and put inside:
Code:
eci-probe-delay = 2500
disable-incompatible-quirk = true
jack-match = sensorprocessor
jack-device = /dev/input/event0
Also have u tried install Whatsup - for Sailfish OS from Openrepos? It showes error cause it need some libraries, some other apps need them too. Can you try to fix it too. Its somethink like (pyqt5)
Write it in console:
Code:
devel-su ssu ar openrepos-latest http://repo.merproject.org/obs/nemo:/devel:/mw/latest_armv7hl
Then update repos in warehouse and try install again
I installed beta build 11 but unfortunately the sim card still not being recognized on xt1514. Another minor bug: the restart option does not work (turns off the phone) (enabled in developer tools).
B4RON said:
I installed beta build 11 but unfortunately the sim card still not being recognized on xt1514. Another minor bug: the restart option does not work (turns off the phone) (enabled in developer tools).
Click to expand...
Click to collapse
Try out beta 13 build. If nothing change i have suspection where i should tweak files.
Reboot in known to me bug but i don't have any idea how to fix it
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The AOSParadox Project 2.0
What's CodeAurora Forums ?
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN and Linux-MSM. Code Aurora is basically AOSP plus all Qualcomm specific enhancements and optimization.
What's AOSParadox Project ?
AOSParadox is a vanilla ROM. Our goal is to pick the least amount of commits possible on AOSP code. Why trying to add features, when CodeAurora provide us with chipset's specific sources ?
At the opposite of most of ROMs that you can find, the trees are made by oursleves to be integrated in this new ROM type.
What should I be aware of ?
Everything is custom and made to work with CodeAurora Forum's sources so customs kernels won't boot (ramdisk is different, selinux rules too, ...).
What doesn't work ?
Code:
- Tell us
Known bugs and their explanation
Dual SIM devices can't use their mobile network unless they convert their userdata partition to "ext4" which will allow them to use 1 SIM slot. Please follow the instruction from this post #703 by @JBCDroid
Autorotate is broken because the whole sensor API changed in Marshamallow and we can't fix it until Motorola release new proprietary blobs (same deal for dual SIM by the way)
Manual/Aufocus in Camera app works however, as I hacked the camera blobs to work because we need Camera blobs for Motorola it can be inconsistent. Just restart the app and it will work. I'm running this version since 5 days and I never had any issue around focus
Video Recording : you need to downgrade your recording resolution to 720p
Setings / Networks / Radio is force closing. The fix is to temporarly switch System Language to English, do what you wanna do on this settings and revert back to your original langage.
GPS is fully working. However it doesn't work with mobile datas on but it works without it.
Downloads
http://ns336247.ip-91-121-110.eu/AOSParadox/falcon/ #LAST_CHANGELOG
How to install ?
1) Place ROM & Gapps in your virtual SD
2) Reboot in Bootloader Mode
3) Go to "Recovery"
4) Wipe Data/Factory Reset
5) Wipe Dalvik cache
6) Install the ROM zip
7) Install the Gapps zip (credits to @vocoderism : gapps-mm-mini.zip and gapps-mm-fix.zip
8) Install SuperSU zip
9) Reboot
Team AOSParadox Members / Official Contributors
@edisile @Quasar @h2o64 @Thecrazyskull
Sources
device/motorola/falcon : (source) The device tree is fully made by us. The thing that I took somewhere else as the header to reflect this source
vendor/motorola : (source) We use our own proprietary files.
kernel/ : (source) This repository is based on F-AOSP
Here is the detailled list of every CM commits used in this ROM :
Code:
build :
https://github.com/AOSParadox/android_build/commit/91727aff6a03bea861633a03bc79a19d875dabf3
https://github.com/AOSParadox/android_build/commit/00089cd0087bac2e61fff354ea0ef709607454e5
https://github.com/AOSParadox/android_build/commit/29e52f8a873543ee9fdad98c18fceacbe3674b16
https://github.com/AOSParadox/android_build/commit/7d1ddd67ba2d616566f6635d4329232a51db6307
https://github.com/AOSParadox/android_build/commit/a1d71209ce42f01530aa2c3fb89fcc5ca46a41ce
https://github.com/AOSParadox/android_build/commit/8df19bb75555782f521bc36feb0271a3bfb5037e
https://github.com/AOSParadox/android_build/commit/def12f7a024f0256c7e67f442e6e76f34fc7788f
https://github.com/AOSParadox/android_build/commit/8b489fda322b28c0e08a1761996dbfb8aa108a88
https://github.com/AOSParadox/android_build/commit/7248ee992676252c4b7f57fcc22cb13a08be6e37
https://github.com/AOSParadox/android_build/commit/9ce6da9a7bbc3b981abf6a0c5081fc6074afcf89
https://github.com/AOSParadox/android_build/commit/ec7d7a313ca6a32538e5b9b419fd801637dc844b
https://github.com/AOSParadox/android_build/commit/367c12521a5e782dc19789280be11c2358fa96d3
https://github.com/AOSParadox/android_build/commit/46ae8da915a7aa13fbaed03be0c1f0286d1d59dd
https://github.com/AOSParadox/android_build/commit/9455076b63562644901ba0aeb33e2cf1d7acfddb
device/qcom/sepolicy :
https://github.com/AOSParadox/android_device_qcom_sepolicy/commit/075da2ab1a3c8bd078fb3fbe8fa5f0f7dedbc7cc
https://github.com/AOSParadox/android_device_qcom_sepolicy/commit/67008cb15f871cd2ef4ef18fe6d6cfd6a648681f
https://github.com/AOSParadox/android_device_qcom_sepolicy/commit/b0193cf87a0ef5d0c378cf4465d592ce801b8957
framework/base :
https://github.com/AOSParadox/android_frameworks_base/commit/5ebafeff0b5e03e3b57a7379ce4efb0ead4e085f
hardware/qcom/audio :
https://github.com/AOSParadox/android_hardware_qcom_audio/commit/decd63eaaba85af318c0854ef388a21c1d4327a6
https://github.com/AOSParadox/android_hardware_qcom_audio/commit/c1661a0000fd6a660cd9f28f26abd97871a23d31
hardware/qcom/bt :
https://github.com/AOSParadox/android_hardware_qcom_bt/commit/2d4f02b2c3fc766e67eafeb8f5ba82b3fee0e622
hardware/qcom/display :
https://github.com/AOSParadox/android_hardware_qcom_display/commit/caaf7e43153b70a4b501ecb9bc6b7f00b3d3956a
hardware/qcom/keymaster :
https://github.com/AOSParadox/android_hardware_qcom_keymaster/commit/7204381b1126d6e996b0fb094976ed8cc51eb73b
system/core :
https://github.com/AOSParadox/android_system_core/commit/7ba9ff37525f0bc36bf55c2b0466b3004faad854
system/qcom :
https://github.com/AOSParadox/android_system_qcom/commit/733c19a3dee254eadebba4cfc0bbeafd004d4c2a
https://github.com/AOSParadox/android_system_qcom/commit/48c75f6fbd8bf18e34dbdb560904dbac64b76872
If you want to build the ROM by yourself here is the tutorial.
If you just wanna look at the sources, follow the marshmallow_falcon branch along the Github
XDA:DevDB Information
[CAF/AOSP][LA.BF.1.1.3-00110-8x26.0][6.0.0][STABLE]AOSParadox Project 2.0 - 20151111, ROM for the Moto G
Contributors
h2o64
Source Code: https://github.com/AOSParadox
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock Lollipop and/or 41.18 Bootloader
Based On: CodeAurora Forums
Version Information
Status: Stable
Current Stable Version: LA.BF.1.1.1_C5
Stable Release Date: 2015-10-28
Current Beta Version: LA.BF.1.1.3-00110-8x
Beta Release Date: 2015-10-28
Created 2015-06-15
Last Updated 2015-11-12
Changelogs
Previous CHANGELOG. but I prefer liking the post, it gives the context of publication + changelog
Reserved 2
Looks amazing, gonna wait till otg works
So grateful to you......
Well i am putting this on download just right away. Well i waited for months this to happen. Well i will test for dual SIM... it will take hour but still worth... Another AOSP project.... MMMM loving it.....
Wanna check the dual sim support first...
It looks very promising. I wonder how smooth it is and battery lifetime
Theme manager or Layers? or no customizations to system look?
plantator said:
Theme manager or Layers? or no customizations to system look?
Click to expand...
Click to collapse
There aren't and I don't think we will implement it because we want to keep it smooth and powerfull as max as possible.
Okay understand so any modifications can be provided through xposed and modules yes? or xposed don't like this rom? There is noticeably improvment in battery life?
plantator said:
Okay understand so any modifications can be provided through xposed and modules yes? or xposed don't like this rom? There is noticeably improvment in battery life?
Click to expand...
Click to collapse
Xposed should work propertly.
Really ? Nice
@h2o64 I'm anxious to try it as soon possible! Thank you :good:
sfoot13 said:
@h2o64 I'm anxious to try it as soon possible! Thank you :good:
Click to expand...
Click to collapse
A build with OTG fix is building.
h2o64 said:
A build with OTG fix is building.
Click to expand...
Click to collapse
Oh thanks for tell me, I'll wait. OTG is very necessary for me
Xt1033 support?
ivanrivas said:
Xt1033 support?
Click to expand...
Click to collapse
It should but nobody tested it.
Dual sim works (xt1033)! Testing it as we speak. Thanks.
Edit: However it FC when I enter Security in Settings.
dysoct said:
Dual sim works (xt1033)! Testing it as we speak. Thanks.
Edit: However it FC when I enter Security in Settings.
Click to expand...
Click to collapse
Hmmm I didn't noticed this bug ! Thanks for reporting
> inb4 powered by TGM-Hybrid Kernel
h2o64 said:
There aren't and I don't think we will implement it because we want to keep it smooth and powerfull as max as possible.
Click to expand...
Click to collapse
Im gonna miss theme engine [emoji20]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MIUI 8 Global for Moto G 2013 Falcon!!
The wait is over!
Features
-Dual Sim (Working)
-Native root
-Gapps Added
-Advanced Power Menu
-Version Center Clock
-Support for Xposed PS.: Do not report problems if using xposed
-Compatible on f2fs and ext4 /data
What does not work properly?
-Mobile network signal doesn't displays correctly sometimes (No SIM card) > FIX (2-Tap in power button)
-Secured WiFi hotspots doesn't work > FIX temporary: Install FoxFI app
-Custom Apns are not saved, but edit an existing one is possible
Install Guide:
-Don't forget to backup your files
-Reboot to recovery
-Copy the ZIP to phone storage
-Wipe Dalvik/ART Cache; System; Data; Cache in recovery
-Install ZIP
-Reboot and enjoy !!!
-First boot may take 10 to 15 minutes "wait..."
PS.: Guide to import and apply themes out of the store
##################################################
Download ROM
MOD Center Clock Version (7.2.xx): Here
Remove Mod Center Clock: Here
MIUI 8 Global Falcon - 7.2.18:
Download Theme Grey for Settings:
Download here
##################################################
Thanks to:
@kowakx
@marcomarinho
Prince.Paul.K's Moderator Miui Forum
Xiaomi by Patchrom
UkkyMS's (Miui Desing Team) for bootanimation
XDA:DevDB Information
MIUI 8, ROM for the Moto G
Contributors
Dio_S
Source Code: https://github.com/MiCode/patchrom
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP (3.0.x-x), Unlocked bootloader
Based On: Lineage OS
Version Information
Status: Beta
Current Beta Version: 7.2.18
Beta Release Date: 2017-02-18
Created 2017-01-11
Last Updated 2017-02-18
Changelog:
(2-18-17) - Version 7.2.18
*Rebase to Lineage OS
*Security patch 01/01/2017 > special Thanks to @anderson mendes
*Fix three fingers screenshot
*Fix issue image in recent app
*Fix reboots to switch input method language
*Fix FC in quick ball
*Fix issues in MiuiTheme cannot be used after flash xposed
*Added T9 dialer support
*Changed icons forUSB charging and switching keyboards
*New - Swipe to delete Lockscreen notifications
*New - Home screen settings added to the Settings
*New - Added Audio Settings
*Updated Gapps
Changelog from previous versions:
(1-19-17) - Version 7.1.19
*Updated gapps
*New wallpaper for lockscreen
*Added support for variants CDMA (XT1028/XT1031)
*Navbar Black for keyboard and others apps (miui apps "white")
reserved
awesome!!! only rom I didn't tested yet.
DS support?
himu_joy said:
awesome!!! only rom I didn't tested yet.
DS support?
Click to expand...
Click to collapse
Yes
really wait is over. flashing right now. thanks !! @Dio_S
No CDMA again? Well, still thank you for your great work
JackyGreen said:
No CDMA again? Well, still thank you for your great work
Click to expand...
Click to collapse
falcon_cdma is compatible.
All variants Falcon is compatible.
mobile data doesnt open and cant access to internet. any solution ?
Dio_S said:
falcon_cdma is compatible.
All variants Falcon is compatible.
Click to expand...
Click to collapse
My friend has compiled a MIUI8 when Xiaomi released the source code of MIUI8, he repaired very few bugs and test it in falcon_cdma
RIL worked fine, but he thought MIUI8 is too stunky for a phone with 1G ram, so he stopped developing on it
After I requested again and again he finally found the rom file in his old drive and shared his MIUI8 with me
I tested it
RIL works perfect, then I got confused and asked him：“Why your MIUI is working with CDMA?"
He said some changes to the ROM will fix CDMA issues, but I don't understood what he was talking about (I'm not a developer)
I was very exited about finding your MIUI8 and flashed it as soon as I can, then, you know
I don't think your MIUI8 is really uncompatible with CDMA, I believe you just need some changes, mabey you can learn the trick from his Flyme5
JackyGreen said:
RIL works perfect, then I got confused and asked him：“Why your MIUI is working with CDMA?"
He said some changes to the ROM will fix CDMA issues, but I don't understood what he was talking about (I'm not a developer)
I was very exited about finding your MIUI8 and flashed it as soon as I can, then, you know
I don't think your MIUI8 is really uncompatible with CDMA, I believe you just need some changes, mabey you can learn the trick from his Flyme5
Click to expand...
Click to collapse
I said that it is compatible since the base used CM 13 official snapshot is also
Dio_S said:
I said that it is compatible since the base used CM 13 official snapshot is also
Click to expand...
Click to collapse
CM 13 official snapshot is also uncompatible with CDMA, but I tried an unofficial version, it is compatible with CDMA:fingers-crossed:
JackyGreen said:
CM 13 official snapshot is also uncompatible with CDMA, but I tried an unofficial version, it is compatible with CDMA:fingers-crossed:
Click to expand...
Click to collapse
I will look
Is MIUI camera working?
kiodo1981 said:
Is MIUI camera working?
Click to expand...
Click to collapse
No this rom does not have miui camera
Now this rom has lenovo (moto) camera by default
@Dio_S Awsome work here bro way too faster rom than previous built ,great work even faster than miui 8 on my xiaomi phone
some Fcs
but i like it.
finally u did it bud.. finally wait is OVER.. Thanks Man.
its working on DUAL Sim too COOL......
AmazingAndreaz said:
How's performance and battery life on this ROM? And I'd love it if someone shared some screenshots
Click to expand...
Click to collapse
The performance of the ROM seems okay, everything is fast & fluid For the battery I can't say anything beacuse I didn't install any apps or used more than 15-20 minutes.
AmazingAndreaz said:
How's performance and battery life on this ROM? And I'd love it if someone shared some screenshots
Click to expand...
Click to collapse
Added some prints for section "screenshots"
Thanks for your work!
The Rom is pretty stable, but performance is a little laggy and sometimes when i press Home or Recents button in the Navbar the phone soft reboots!
Also the root seems to be not working properly
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Mokee
MoKee Open Source is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
All the source code for Mokee is available in the Mokee Github repo. And if you would like to contribute to Mokee, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, ...
* You flash this at your own risks
*/
DEVICE: Xiaomi Redmi 4A (Rolex)
Installation:
First time installing, coming from another ROM
Copy ROM to SDCard
Copy GApps to SDCard
Boot into recovery
Backup EFS partition
Wipe -> Advanced Wipe -> Dalvik + System + Cache + Data
Install ROM
Install GApps
Reboot
First start takes a long time (like 5-10 min)
Upgrading from earlier version of Mokee
Copy ROM to SDCard
Boot into recovery
Install ROM
Reboot
Downloads:
TWRP: 3.1.1
ROM: MK60.1-rolex-(20170807) v1.2
GAPPS: here (Select ARM64, 6.0, Pico)
VoLTE patch: here You must install Xiaomi.Eu rom, flash mokee and flash this patch to enable VoLTE. Videocalls not implemented yet.
You can find old versions on Androidfilehost
Root:
Go to 'Settings/About Phone'
Tap 7 times on 'Build number'
Go back
Go to 'Developer options'
Tap on 'Root access'
Select 'Apps only' ('Apps and ADB' if you plan to use it in adb shell)
Screenshots:
What's working
2D/3D acceleration
HW video encoding/decoding
Screen cast (Miracast/Wifi Display)
Sound
Camera
Wifi
Bluetooth
GPS
Sensors
SDCard
IR blaster
VoLTE
What's not working :
Videocalls on voLTE
You tell me
Please DONATE if you like my work
Source Code:
Mokee on github
Device Tree
Special Thanks to
CarlosArriagaCM
XDA
Androidfilehost
Mokee team
XDA DevDB Information:
Mokee Open Source , ROM for Redmi 4A (Rolex)
ROM OS Version: 6.x MM
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Custom Recovery
Based On: LineageOS
Version Information
Status: Nightly
Security Patch: 2017-04-01
Created 2017-08-02
Last Updated 2017-08-07
Changelog:
Added voLTE patch. Videcalls not implemente yet.
<< version 1.2 >>
- New settings for voLTE (need testing)
- Clean tree.
- Increase brightness of Camera.
<< version 1.1 >>
- Optimized GPS
- Fixed Camera video recording.
inviting all redmi 4a users we can jion together and make fun
Please follow link
https://chat.whatsapp.com/GpIMzaI7w6Y7wVHxQczcGF
And join with us and we would like Dev also be part of our group
Expecting u all
Welcome
.
.
.
New version 1.2 Out!
Testing.......
VoLTE not working still.... For some odd reason gapps kept crashing as well
EDIT: Reflashed rom again... Gapps works perfectly without any errors
eternal1404 said:
VoLTE not working still.... For some odd reason gapps kept crashing as well
Click to expand...
Click to collapse
Thanks eternal!
Can you send me a log?
For this, you can use SysLog (available on F-Droid or Google Play).
Make sure to root device before using this app.
To get the logs:
Start SysLog
Click on 'TAKE LOG'
Once log is taken, SysLog will try to share the resulting file, just cancel
Send me the file /sdcard/SysLog/[YYYY-MM-DD_HH.mm]/[YYYY-MM-DD_HH.mm].zip
Will try to send as soon as possible:laugh:
Here it is! Note :- Reflashed rom... Gapps worked perfectly no errors.VoLTE not working though.
eternal1404 said:
Here it is! Note :- Reflashed rom... Gapps worked perfectly no errors.VoLTE not working though.
Click to expand...
Click to collapse
Ok. I'll watching!
manucarcor said:
Ok. I'll watching!
Click to expand...
Click to collapse
Glad to help Hopefully Xiaomi Release sources soon... Or maybe u guys create some magic:laugh:
count me in too. mokee lover here.
I try it, thanks for your work.
Thank you, gracias amigo
Hello ..great work very good rom, is it possible to enable sw navigation bar on this rom? instead of hw buttons.
noob055 said:
Hello ..great work very good rom, is it possible to enable sw navigation bar on this rom? instead of hw buttons.
Click to expand...
Click to collapse
Edit build.prop and add qemu.hw.mainkeys=0
thanks, I've tried this and it didn't work...
could it be a pre-build kernel issue ? ..anyway rom is still good.
Any updates?
tried this rom. so smooth so far. but phone shows it is always encypted. did i miss something?
Any updates @manucarcor ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Moto E LTE 2015 [surnia]
What is this?
An AOSP based ROM, with gapps included, and all Pixel stuffs (launcher, wallpapers, icons, fonts, bootanimation).
Based on Android 8.1
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Bluetooth
FMRadio
NFC
Lights
Sound / vibration
Face Unlock
Known issues
Camcorder
DON'T FLASH GAPPS, ALREADY INCLUDED
Download from AFH
Useful files
Pixel 2016 Live Wallpapers (normal apk)
Pixel 2017 Live Wallpapers (normal apk)
AR Stickers for Google Camera (normal apk)
Translation
Help with project translation
Telegram channel
Stay tuned for something awesome
Android OS version: 8.1.0_r4
Security patch level: January 2018
Build author: merothh
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
XDA:DevDB Information
PixelExperience , ROM for the Moto E 2015
Contributors
merothh, Eldainosor, DroidFreak32
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2018-02-21
Last Updated 2018-02-21
Much thanks to
* @ElDainosor (For helping me with stuff and hanging out with me always)
* @DroidFreak32 (Also for helping me with stuff and hanging out with me always)
Reserved 2
Reserved 3
Great, Thanks
Can you make this also for otus
wow
Reserved!:good:
How to flash this thing?
I wiped dalvik, data, system, etc and flashed the Rom via TWRP, but after rebooting it stays in loop... Any idea what I did wrong?
Thx
DocRobbe said:
How to flash this thing?
I wiped dalvik, data, system, etc and flashed the Rom via TWRP, but after rebooting it stays in loop... Any idea what I did wrong?
Thx
Click to expand...
Click to collapse
Make sure have the latest squid TWRP.
Then
1. Factory Data Reset
2. Wipe System , Data , Dalvik Cache , Cache
3. Flash *just the ROM*
4. Reboot
SystemUI no anda la notificación flotante reinicio recuperación
Can u build this ROM for Otus
I'm not sure if this happened because I had to install GApps (otherwise Setup Manager would crash because of Nougat GApps already installed from previous ROM) or it is an issue with the ROM itself:
There's no keyboard, solved by downloading GBoard apk from apkmirror, placing it in a folder, and copying this folder to /system/app/.
There's no home app, solved by installing one from Play Store.
Now, some things I've encountered (not related to how the ROM works, but just to give advice to anyone).
1. Dolby Atmos (used the one from here https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508) not working, the app crashes.
2. Squid's kernel does NOT work with this ROM. If flashed, the phone will keep looping at Google's logo.
3. Superuser (tried this with Magisk) has to be installed always BEFORE booting up for the first time, otherwise, loop at Google's logo.
On the other side, it works pretty good. I haven't found anything not working, and haven't noticed the phone heating or lagging. Everything is smooth.
Nice work and thanks!
Does anyone else have sound issues? I don't get any sound from the main speaker but phone call earpiece works as well as headphone jack.
I'm going to test other roms in the meantime to check if it's my hardware. I was unsuccessful restoring my stock backup =.=
edit: nevermind. not a rom issue at all!. slapped the phone to fix speakers
SonicoXD said:
I'm not sure if this happened because I had to install GApps (otherwise Setup Manager would crash because of Nougat GApps already installed from previous ROM) or it is an issue with the ROM itself:
There's no keyboard, solved by downloading GBoard apk from apkmirror, placing it in a folder, and copying this folder to /system/app/.
There's no home app, solved by installing one from Play Store.
Now, some things I've encountered (not related to how the ROM works, but just to give advice to anyone).
1. Dolby Atmos (used the one from here https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508) not working, the app crashes.
2. Squid's kernel does NOT work with this ROM. If flashed, the phone will keep looping at Google's logo.
3. Superuser (tried this with Magisk) has to be installed always BEFORE booting up for the first time, otherwise, loop at Google's logo.
On the other side, it works pretty good. I haven't found anything not working, and haven't noticed the phone heating or lagging. Everything is smooth.
Nice work and thanks!
Click to expand...
Click to collapse
squids kernel is only compatible with nougat as of now since there's no stable oreo ROMs yet
Quadratilla said:
squids kernel is only compatible with nougat as of now since there's no stable oreo ROMs yet
Click to expand...
Click to collapse
I see, thanks for info. I thought it was compatible because in an update it stated "patches for oreo support".
Is this running the Android Go optimizations? My only experience with Oreo is on my OnePlus 3 (which obviously doesn't turn on Android Go) and I'm not sure is the Go system is turned on by default for devices that meet its requirements.
high1guy said:
Is this running the Android Go optimizations? My only experience with Oreo is on my OnePlus 3 (which obviously doesn't turn on Android Go) and I'm not sure is the Go system is turned on by default for devices that meet its requirements.
Click to expand...
Click to collapse
You can flash a zip from what I've heard to use Go optimisations and stuff.
merothh said:
You can flash a zip from what I've heard to use Go optimisations and stuff.
Click to expand...
Click to collapse
How stable is this ROM? Thinking of making my surnia my daily driver if I can unlock it. Galaxy s4 mini VE (I9195I) development is borderline dead
And why you can't download it from the Official Page? There's the device but it says no files uploaded
plz do something about the camcoder to fix it amd it will become complete bugless rom for regular use......
u might also use footej camera and edit it as default camera of this rom.....
btw great work though....
god bless u....
LineageOS is a free and open-source operating system for various devices, based on the Android mobile platform.
Disclaimer:
It is your decision to install this software on your device. Neither LineageOS developers nor I take any responsibility for any damage that may occur from installing this software on your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Notes:
This rom does not come pre-rooted or bundled with any modifications or apps. The device tree is heavily based off of Sumire's officical lineageOS repo with only the necessary modifications required for Satsuki (Z5 Premium).
Download:
Android File Host: ROM
Prerequisites:
- Make sure you're coming from firmware 32.4.A.1.54 before flashing this rom.
- Bootloader needs to be unlocked.
- Ensure that you have TWRP recovery from here.
Install:
1) Reboot into TWRP Recovery.
2) Select Wipe -> Swipe to factory reset -> Advanced Wipe -> Dalvik /ART Cache, System, Cache and Data -> Swipe to Wipe.
3) Go back to TWRP's main menu -> Select Install -> Locate and choose lineage-14.1-20200507-UNOFFICIAL-satsuki.zip file -> Swipe to confirm flash.
GApps/Root:
- Flash Gapps arm64 7.1 for Google Apps.
- Flash Magisk for root.
Sources:
Kernel
Device Tree (Satsuki | kitakami-common)
Bugs:
Please let me know about any bugs you encounter, I will look into them ASAP. Personally I haven't found any but I've tested the basic features such as brightness, camera, flash, sim detection, WiFi, Bluetooth, fingerprint, sound etc. which are all working fine on my device (E6853).
XDA:DevDB Information
LineageOS 14.1, ROM for the Sony Xperia Z5 Premium
Contributors
Joel16
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: 2020-05-07
Stable Release Date: 2019-12-12
Created 2019-12-11
Last Updated 2020-05-07
Change-logs:
2019-12-12
- Initial Release
2019-12-23
- Updated security patch to December.
- Fix some missing proprietary blobs. (camera, nfc and qti-iop)
- Add support for aanc tuning mixer controls.
- Updated outdated config files to the ones from 32.4.A.1.54.
- SD Card detection fix on dual sim devices by kv123.
2020-02-16
- Updated Android security patches to Feb 2020.
2020-04-14
- Updated Android security patches to March 2020.
- arm: DT: Satsuki: Lower backlight init value
2020-05-07
- Updated Android security patches to April 2020.
- Fixed NFC toggle.
- Fixed WiFi tethering.
- Fixed SD card not being accessible on dual-sim variants.
Joel16 said:
Change-logs:
2019-12-12
- Initial Release
Click to expand...
Click to collapse
Any chance we can get Oreo sir?
yeshuabainz said:
Any chance we can get Oreo sir?
Click to expand...
Click to collapse
I do plan on making an Oreo release at some point. However functionality wise I cannot guarantee anything. As always no ETAs.
I really appreciate this work although I don't have Z5P. I wish I have it so I could do some testing. I love Z5 family.
Joel16 said:
I do plan on making an Oreo release at some point. However functionality wise I cannot guarantee anything. As always no ETAs.
Click to expand...
Click to collapse
Ill be waiting for Oreo Update,btw thanks for the Rom it fix my Auto Rotate problem
yeshuabainz said:
Ill be waiting for Oreo Update,btw thanks for the Rom it fix my Auto Rotate problem
Click to expand...
Click to collapse
Before Oreo, I want to port my old school favouirte rom to this device. (Omni Rom)
Thank you so much! I'm currently using Bernies unofficial lineage os 14.1 from the other thread. Can I just flash to this or do I need to go back to 32.4.A.1.54 first?
Mike3009 said:
Thank you so much! I'm currently using Bernies unofficial lineage os 14.1 from the other thread. Can I just flash to this or do I need to go back to 32.4.A.1.54 first?
Click to expand...
Click to collapse
Flashing firmware 32.4.A.1.54 again is not required. You just need to make sure you were initially on firmware 32.4.A.1.54 before flashing Bernie's builds as well. As long as you wipe data/cache like the install instructions above suggests you should be fine.
I flashed it over and it works perfectly! Thank you!
I've decided to scrap the omnirom idea for now. Anyways a little status update on....
You guessed it, Oreo!
As stated earlier, I cannot guarantee any functionality on any android version > 7.1.2 and I'm also pretty new to Android development so no promises here. Although I have yet to debug anything, initially only WiFi, Bluetooth, Brightness, Double tap to sleep/wake is currently working. Everything else is broken -> camera, flash, sim card detection, speakers, mic, internal storage and unless I missed anything else, just assume its broken. Until/IF I fix majority of these issues I won't be releasing any builds. I'll keep you guys up to date on this thread but for now there won't be any ETAs.
For real????? Man, you are freaking awesome! Really appreciate all the work you're doing! Definitely great to see anyone making progress on this. Best of luck!
nice,i hope u can add xperia function aswell ??
Another Status Update for Oreo:
Speaker/Mic has been fixed with the Oreo build. All of the minor audio issues (reported by a logcat) have been fixed as well, which allows AudioFX to work. There are a bunch of other issues still that I'll need to fix before I can make a release.
Persisting Issues:
- No sensors are working (proximity, accelerometer, gyroscope, light etc) A lot of functionality such as adaptive brightness, auto rotate will not work until this is fixed.
- Sim detection
- Camera
- Fingerprint
What is currently working:
- WiFi
- Bluetooth
- GPS
- Fingerprint
If I can get the sensors working, I'll release a beta/test build. Camera/Sim service is definitely going to be the hardest, and will be put up last simply because its better to get most of the basic functionality working before I can start working on the difficult stuff. It's worth mentioning again that I'm not a professional android developer, I'm just a recent college graduate that is doing this as a hobby. I'm still learning how all this works so I cannot guarantee anything! So don't hold me to it, but I will give it my best.
Will you be releasing the December security update for lineage os 14.1? Once again, excellent work on your progress on 15.1 and also your 14.1 is the smoothest I've ever used.
Mike3009 said:
Will you be releasing the December security update for lineage os 14.1? Once again, excellent work on your progress on 15.1 and also your 14.1 is the smoothest I've ever used.
Click to expand...
Click to collapse
I will try to update this in the coming week considering this is stable while the other rom isn't. Right now I don't have enough storage for both Oreo and Nougat roms (The sources use up a lot of storage).
No mount sd card (model e6833)
SD card is working fine here e6853.
Allex1992 said:
No mount sd card (model e6833)
Click to expand...
Click to collapse
It seems to be coming from a dual sim device. Can you please fetch the logs?
- Reboot device
- Connect usb cable with debug on and data transfer on.
- Open terminal:
- adb root
- adb shell dmesg > dmesg.txt
- adb shell logcat > logcat.txt (close/interrupt this after a couple of seconds)
EDIT: Try new version released below.
New release - 2019-12-23
- Updated security patch to December.
- Fix some missing proprietary blobs. (camera, nfc and qti-iop)
- Add support for aanc tuning mixer controls.
- Updated outdated config files to the ones from 32.4.A.1.54.
- SD Card detection fix on dual sim devices by kv123.
@Allex1992 and @yeshuabainz or anyone else with a dual sim variant please test if the SD card detection works now. If it does I can apply the patch for lineage-15.1 and TWRP. If it doesn't work provide logs.