Hi people
when I tried to replace my power module on my phone, I accidentally removed the whole part of the cables. That means, that it is impossible, to make the power button and the volume buttons working, and I can't turn on the phone. I am almost sure, that the developer options wasn't enabled. I would really appreciate any help because I have no clue if I can make the phone work ever again. I can send pictures if that helps.
Thanks for any help!
Related
My power button does not work at all. It doesn't put the phone to sleep nor can it wake it up. Holding it down doesn't even give me an option to shut it down and presumably it can't turn the phone on either.
So basically I think I just wore the button down. Now in spite of that, is there a way to reflash a new ROM without being able to turn it on using the button? I mean, if I remember the procedure correction, you just have to turn it off to take the sim card out and to put it back in. Can I forgo this step?
I mean, I am just sliding out my keyboard to wake it up but I fear if my battery ever fully runs down.
Try to Hard reset your device..
To perform a hard reset
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel.
4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Yup, didn't work. Am I boned if my phone ever turns off? Jeez, and I just received that extra battery too.
Is there a way to remap the sleep button to the PTT key?
you dont have to pull out the stylus or have the device on to do a hard reset. just turn on the device and immediately hit volume down and center. once the screen lights up you can let go then wait for the reset message and press volume up.
anyways, if you have a att fuze, take it in, its under warrenty, theyll replace it. in any case you need it fixed. you cant live your live hoping your battery will never die. you cant turn it on or flash a new rom or anything without a working power button. if you dont have att im sure you can call htc and tell them you want it fixed and theyll mail you the supplies to get it shipped. just hope you can live without it for a couple days. its youre only options if you want it working.
I came back here all excited to post that it suddenly started working but it is back to the way it was.
The phone is really old so it's just of warranty and I don't think it is worth it to have it fixed when so many other problems are wrong with it. I guess it's time to be looking at new phones.
And now the power button is working. This phone just boggles the mind, people. I'm sure it'll stop working in a couple of hours though. Does anyone have any ideas what could be causing this? Maybe a short due to rain or something? Worn down contacts?
Same power button over here.
Sorry for reply on an old article but Google won't help me. I'm havin' the same problem. Na responds on the power button neither can i do a hard reset.
Anyone has a sollution. Phone is out of warranty ...
Is it a hadware problem of something with the software. Still has the (updated) stock rom. I've tried to reflash it with this latest rom but this didn't solved the problem.
Solved (for the time being..) The button seemed to be stuck. With my fingernail I managed to 'lift' it.
Hi everyone,
Today i faced a problem with my tf700T, i tried to power it on but i couldn't.
I tried all the following steps but with no luck at all:
1. Normal press on power button, nothing happens.
2. Cold reset (pressing power & volume down buttons for very long time), nothing at all (no vibrations, not a single sign of life).
3. pressing reset button. nothing
4. suspecting that it's a screen problem. i pressed volume down/up , but no vibration occurs (i.e. the tablet is not turned on)
The tablet is fully charged, when i connect it to the charger the led shows green light.
I tried to connect it also using usb cable to a pc (led doesn't show any light) and left it for hours. tried to power on again, but no luck. Needless to mention that it's not detected by pc also, since it's turned off.
Now i am out of ideas, i can't think of anything else to do.
If anyone can help me with anything to try, i will be very thankful.
Thanks
PS: i searched before posting this thread but i didn't find a relevant post. If there's a similar post, please guide me to it and i apologize for duplicating it.
bahaahamza said:
Hi everyone,
Today i faced a problem with my tf700T, i tried to power it on but i couldn't.
I tried all the following steps but with no luck at all:
1. Normal press on power button, nothing happens.
2. Cold reset (pressing power & volume down buttons for very long time), nothing at all (no vibrations, not a single sign of life).
3. pressing reset button. nothing
4. suspecting that it's a screen problem. i pressed volume down/up , but no vibration occurs (i.e. the tablet is not turned on)
The tablet is fully charged, when i connect it to the charger the led shows green light.
I tried to connect it also using usb cable to a pc (led doesn't show any light) and left it for hours. tried to power on again, but no luck. Needless to mention that it's not detected by pc also, since it's turned off.
Now i am out of ideas, i can't think of anything else to do.
If anyone can help me with anything to try, i will be very thankful.
Thanks
PS: i searched before posting this thread but i didn't find a relevant post. If there's a similar post, please guide me to it and i apologize for duplicating it.
Click to expand...
Click to collapse
I think you alredy tried everything in the book. It's time to send it out for repair. Note: Even some how it turn itself back on later, I still recommend to send it out, because it's not NORMAL at all, possible defective Power button, main board etc...
buhohitr said:
I think you alredy tried everything in the book. It's time to send it out for repair. Note: Even some how it turn itself back on later, I still recommend to send it out, because it's not NORMAL at all, possible defective Power button, main board etc...
Click to expand...
Click to collapse
Thank you, i wanted to make sure i didn't miss anything. I will contact their support.
But i'm curious about "turning itself back on later", do you know how could this happen and how much does it take to occur ?
Hello,
[admin; if this post is more appropriately placed somewhere else in the forum, then please move it]
Before giving up on my cellphone and resort to ordering a new one I'll ask for help here too.
Phone is a Kolina K100+ (chinese phone) running android 4.2. It is rooted but it is still running stock ROM (to my knowledge, I bought it new and have not tinkered with the ROM).
Current situation is that the phone is completely dead.
Dead as in turned off, does not light the LED when inserting the charger cable, does not react to any button presses, or combination of button presses.
I have actually no idea what have caused this situation. Granted, the phone has accidentially been dropped twice the last week but it did not turn itself off at any of the occasions. Yesterday, I noticed that the phone had turned off and I tried to turn it on. After a while I got it to go at least to the boot screen but after having to put it away (was actually standing in a line and it was my turn...) it was dead when I was able to reach for it again and after that the phone has been completely dead.
When connecting the USB cable to the computer the computer detects an unknown USB device but cannot seem to install any drivers.
Button combinations I have tried;
- power on button
- long press (~1minute) on power button
- volume down + power button
- volume up + power button
- volume up + volume down + power button
- home button (touchscreen button that is) + power button
...no luck with either combination, no reaction at all from the phone.
I have also managed to pull off the back cover from the phone and was able to disconnect the battery connector and let it lay completely powerless for a few hours before reconnect the battery to the phone and reassemble the back cover.
Any suggestions on if there are any other measures I can do or if there is something I have overlooked in trying to resurrect it?
same problem here phone just stop work i dont know why .
malamas said:
same problem here phone just stop work i dont know why .
Click to expand...
Click to collapse
Do you still have the phone? I would buy it! I need the LCD but I could not find any...
Oltcit said:
Do you still have the phone? I would buy it! I need the LCD but I could not find any...
Click to expand...
Click to collapse
sorry im late. i have the phone like a new contition . if you like to buy i give you but im live in greece
Hey guys my Nexus 5 is not functioning because the power button has gone bad, I tried all the "smashing" the phone and pressing the power button repeatedly but nothing works, the button inside is broken(not physically broken but just not functioning), i opened up the device and tried to put a little pressure on the button module on the motherboard but didnt help, HOWEVER:
I noticed that the volume up and down module buttons on the motherboard are the same as the power button module (as far as I can tell), my question is, if I take it to someone specialized, could they remove one of the volume modules and solder it in the place of the power button to make my phone at least functional? or are these modules just different and they just look alike?
I live in a country where I can no longer import virtually anything and I can't buy the module replacement even if I wanted to, please help.
The power button on my Poco has a small hairline scratch on it, it's now over sensitive so any slight touch on it turns the phone off and can sometimes call emergency number depending on how the phone is sitting.
I don't want to pay someone to replace the power button cos phone shops are always £70 upwards..
I've turned double tap screen to unlock, is there a way to change what buttons do, so I'm thinking like use a volume button to act as power and make power button redundant.
Thanks for looking any help would be appreciated.
I think it's possible but if you don't know what root or ADB are then it's not going to be easy for you. Apparently this app can do it. But you need to be rooted or use ADB commands.
Ah ok I was imagining if plugged into pc I would easily see a directory etc. It's under warranty still so I'll email support. Thank you though