Hi,
I flashed CleanROM over Cromi (why .. i don't know.. tired certainly).
So .. it won't boot ..and .. i format all the TF700 (why .. i don't know.. tired .. no doubt).
And now ? Stuck on Asus screen (the very first) no os installed but access to recovery (twrp 2.6).
What i tried ?
- Fastboot .. ok .. i flash twrp, cwm .. ok but
- adb .. device detected but Read-Only File system .. impossible to push anything
- adb sideload in trwp .. device not detected on adb command line
- naked driver .. i tried .. but it won't install (files not found ???)
- Always USB MTP Device failed to install
- SDCard unable to mount in twrp (always after format in fat32)
I tried many things but impossible to put any .zip on /sdcard ...
Can I reroot without OS installed ?
Any idea ?
Bricked ?
popot35 said:
Hi,
I flashed CleanROM over Cromi (why .. i don't know.. tired certainly).
So .. it won't boot ..and .. i format all the TF700 (why .. i don't know.. tired .. no doubt).
And now ? Stuck on Asus screen (the very first) no os installed but access to recovery (twrp 2.6).
What i tried ?
- Fastboot .. ok .. i flash twrp, cwm .. ok but
- adb .. device detected but Read-Only File system .. impossible to push anything
- adb sideload in trwp .. device not detected on adb command line
- naked driver .. i tried .. but it won't install (files not found ???)
- Always USB MTP Device failed to install
- SDCard unable to mount in twrp (always after format in fat32)
I tried many things but impossible to put any .zip on /sdcard ...
Can I reroot without OS installed ?
Any idea ?
Bricked ?
Click to expand...
Click to collapse
You probably didn't mount your system correctly. You can try this and see if it works out for you. You need to boot into your TWRP and select mount. Then you need to select your internal SD as your mounting SD and tick all the check boxes in the mount option. From here, you can start to install your new rom from your external SD. Good luck.. :fingers-crossed:
LetMeKnow said:
You probably didn't mount your system correctly. You can try this and see if it works out for you. You need to boot into your TWRP and select mount. Then you need to select your internal SD as your mounting SD and tick all the check boxes in the mount option. From here, you can start to install your new rom from your external SD. Good luck.. :fingers-crossed:
Click to expand...
Click to collapse
In TWRP / Mount .. only cache and data are check ..
I check System but nothing change (i have to check this after reboot)
Impossible to check MicroSDcard
popot35 said:
In TWRP / Mount .. only cache and data are check ..
I check System but nothing change (i have to check this after reboot)
Impossible to check MicroSDcard
Click to expand...
Click to collapse
You can try to format your external SD as Fat32 with Gparted and set it as primary partition. TWRP probably can't read your SD with a current format. Good luck.
Downgrade to TWRP 2.5.0.0 (2.6.0.0 is buggy) and reflash CROMI or CROM-X (which ever you had working). Old CleanROM won't be compatible with the newer bootloaders
LetMeKnow said:
You can try to format your external SD as Fat32 with Gparted and set it as primary partition. TWRP probably can't read your SD with a current format. Good luck.
Click to expand...
Click to collapse
ok i'll try Gparted .. when i'll understand how working )
sbdags said:
Downgrade to TWRP 2.5.0.0 (2.6.0.0 is buggy) and reflash CROMI or CROM-X (which ever you had working). Old CleanROM won't be compatible with the newer bootloaders
Click to expand...
Click to collapse
ok to "downgrade to twrp 2.5 .. but still the same pb .. how flash any ROM without access to SDcard or external SD ?
I finally found a compatible microSD card ..
It's ok !
Thanks you guys !
Hi! i have a motorola defy MB525 , and its running Eclair 2.1, so i wanted to flash CM11 , i did everything successfully until the part where you have to flash your ROM ! good thing im cautious and always check the zip. install before wiping any data, and i got the following message when trying to install zip. from sdcard :
E:can't mount /sdcard
because i haven't wiped my data yet, the phone is now working 100%, but i want kitkat not eclair,so can anyone help ??
my clockworkmod version is 2.5.1.8
NOTE: i googled this and found out that sometimes CWM can only read FAT32 file system , but my sdcard is already formatted to FAT32 file system, and if it makes any difference i did format it again to the same file system FAT32 , but i still get the same error!
I REALLY WANT CM11 BECAUSE MY CURRENT ROM IS VERY BAD AND OUTDATED! SO PLEASE HELP!!
Thx
Did anybody found the answer yet?
Im still stuck at the same problem....any help??
Try Flashing The CWM Recovery Again.......
sazzam10 said:
Hi! i have a motorola defy MB525 , and its running Eclair 2.1, so i wanted to flash CM11 , i did everything successfully until the part where you have to flash your ROM ! good thing im cautious and always check the zip. install before wiping any data, and i got the following message when trying to install zip. from sdcard :
E:can't mount /sdcard
because i haven't wiped my data yet, the phone is now working 100%, but i want kitkat not eclair,so can anyone help ??
my clockworkmod version is 2.5.1.8
NOTE: i googled this and found out that sometimes CWM can only read FAT32 file system , but my sdcard is already formatted to FAT32 file system, and if it makes any difference i did format it again to the same file system FAT32 , but i still get the same error!
I REALLY WANT CM11 BECAUSE MY CURRENT ROM IS VERY BAD AND OUTDATED! SO PLEASE HELP!!
Thx
Click to expand...
Click to collapse
i think Your CWM REcovery got corrupted.........
try reflashing the recovery and Try Again.....
say Thanks If this helped You
sazzam10 said:
Hi! i have a motorola defy MB525 , and its running Eclair 2.1, so i wanted to flash CM11 , i did everything successfully until the part where you have to flash your ROM ! good thing im cautious and always check the zip. install before wiping any data, and i got the following message when trying to install zip. from sdcard :
E:can't mount /sdcard
because i haven't wiped my data yet, the phone is now working 100%, but i want kitkat not eclair,so can anyone help ??
my clockworkmod version is 2.5.1.8
NOTE: i googled this and found out that sometimes CWM can only read FAT32 file system , but my sdcard is already formatted to FAT32 file system, and if it makes any difference i did format it again to the same file system FAT32 , but i still get the same error!
I REALLY WANT CM11 BECAUSE MY CURRENT ROM IS VERY BAD AND OUTDATED! SO PLEASE HELP!!
Thx
Click to expand...
Click to collapse
Any luck with that?
can any one help me
what i did was, formatting the system ,data partion using wipe option in recovery (twrp), by mistake the battery got removed during the process since then the problem occured..
my yuphoria device stuck on the boot logo
is not able to mount /system /data /cache and internal storage
it is booting in fastboot mode as well as in recovery but i m not able to flash any rom, in recovery its giving the error as unable to mount /system /data /cache, showing 0mb space in internal storage and system
i also tried to flash using fastboot but giving error at the system partition sowing system write failure.. can some one identify provide me with the solution .. thanks
Same problem
harshgoswami said:
can any one help me
what i did was, formatting the system ,data partion using wipe option in recovery (twrp), by mistake the battery got removed during the process since then the problem occured..
my yuphoria device stuck on the boot logo
is not able to mount /system /data /cache and internal storage
it is booting in fastboot mode as well as in recovery but i m not able to flash any rom, in recovery its giving the error as unable to mount /system /data /cache, showing 0mb space in internal storage and system
i also tried to flash using fastboot but giving error at the system partition sowing system write failure.. can some one identify provide me with the solution .. thanks
Click to expand...
Click to collapse
I'm also facing same problem.......shows 0MB in Internal storage(twrp).......and stuck with YU logo doesnt go further....
I am also facing the exact same problem. Did you find any solution ??
BOTDeveloper said:
I am also facing the exact same problem. Did you find any solution ??
Click to expand...
Click to collapse
same here. any solution?? please help guys !
Facing same problem. Did anyone solve the issue?
cm-13.0-20161219-NIGHTLY-lettuce.zip apply this update from sd card it works
Guys ,..... anybody plz any solutions..... developers!!
facing exact same problem
guys facing exact same problem. searched everywhere but couldn't find any solution. im very much frustrated right now. tried everything . nothing works
facing same problem
any update on howm top solvew thisa guys?
Solution for 0 MB storage in TWRP
Hi Brothers!
It's my first time posting here , so if i make a mistake i am sorry in advance for that.
Solution for 0 MB storage in TWRP is very easy.
You need to boot your phone into TWRP.
In 2nd step you need to go to WIPE option .
Select Data and click on FS Options e.g. trying to change its partition format, most phones use Ext4.
Do same with the Data.
And TADA!!!!
Your problem is solved
I hope it helps you guys getting answer after a long time because i saw it late. Sorry for that.
same problem
BOTDeveloper said:
I am also facing the exact same problem. Did you find any solution ??
Click to expand...
Click to collapse
Try to wipe everything
Format data using twrp
It should be solved.
Hi my YU Yuphoria 5010 started acting up since last week ,when i noticed that the phone was restarting randomly and the settings was missing and even if i clicked on the settings logo in the notification panel, nothing would happen .So i decided to flash a Cusstom ROM instead and boot into recovery.While trying to wipe cache,dalvik and data I got an error message "uable to mount data,cache ,system(invalid argument) and internal memory* was showing up as 0.So i thought my phone was bricked and tried reviving it with the sd card method.But everything else except for system flashed , and got an error FAILED (remote: flash write failure ) just for system .Anyway now I could boot into recovery using fastboot boot command and the internal memory started showing up correcty. The fastboot command is the only way i could get into recovery, if i try power+volume down it would just come up with the empty battery logo. After this i installed qualcomm drivers and manually changed the driver to Qualcomm HS-USB QD Loader 9008 and tried flashing through QFil with a flashable stock ROM and ended up with the error message:"Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol** at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)** at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail".
But after going through some of the posts I found that my phone might not be bricked in the first place.My device just shows up as 'Android' under Other devices in Device Manager.
The following are the details from device manager.
Device type: Other devices
Manufacturer: Unknown
Location Port_#002.Hub_#003
Problem code : 0000001C
Physical Device Object name: \Device\USBPDO-6
Hardware IDS: USB\VID_2A96&PID_300A&REV_0100
USB\VID_2A96&PID_300A
{259abffc-50a7-47ce-af08-68c9a7d73366}[13]: 6.0
{6a3433f4-5626-40e8-a9b9-dbd9ecd2884b}[4]: <true>
{6a3433f4-5626-40e8-a9b9-dbd9ecd2884b}[6]: <true>
I also tried to restore through TWRP recovery using the back up my brother created on his YU 5010A to no success.Changing the file system type and back to ext4 also didnt help. I use a Windows 10 64bit Laptop.
What could I possibly do to revive my phone?Kindly help.
Sent from my HUAWEI Y560-L01 using XDA Free mobile app
Not working for me
rahman.khan001 said:
Hi Brothers!
It's my first time posting here , so if i make a mistake i am sorry in advance for that.
Solution for 0 MB storage in TWRP is very easy.
You need to boot your phone into TWRP.
In 2nd step you need to go to WIPE option .
Select Data and click on FS Options e.g. trying to change its partition format, most phones use Ext4.
Do same with the Data.
And TADA!!!!
Your problem is solved
I hope it helps you guys getting answer after a long time because i saw it late. Sorry for that.
Click to expand...
Click to collapse
Not getting any help as the same failed to mount issue is continuing.
puriadeb said:
Not getting any help as the same failed to mount issue is continuing.
Click to expand...
Click to collapse
Wipe everything include system,internal storage and data.
Reboot TWRP to recovery again
Now check your internal storage will be mounted
After it connect phone with pc in mtp mode ( TWRP)
Copy any custom ROM
Then install it through recovery
Enjoy
nischait said:
Wipe everything include system,internal storage and data.
Reboot TWRP to recovery again
Now check your internal storage will be mounted
After it connect phone with pc in mtp mode ( TWRP)
Copy any custom ROM
Then install it through recovery
Enjoy
Click to expand...
Click to collapse
Hi,
I have tried this several times without any help.
Cache format issue .Solved using advanced wipe in TWRP
harshgoswami said:
can any one help me
what i did was, formatting the system ,data partion using wipe option in recovery (twrp), by mistake the battery got removed during the process since then the problem occured..
my yuphoria device stuck on the boot logo
is not able to mount /system /data /cache and internal storage
it is booting in fastboot mode as well as in recovery but i m not able to flash any rom, in recovery its giving the error as unable to mount /system /data /cache, showing 0mb space in internal storage and system
i also tried to flash using fastboot but giving error at the system partition sowing system write failure.. can some one identify provide me with the solution .. thanks
Click to expand...
Click to collapse
open TWRP recovery.Go to wipe section and select advanced wipe option here .Now select data and cache from check boxes.then click on change partition format.Select ext4fs .Wipe it then wait for sometime because sometimes it takes approximately 15-20 mins so be patient .It will successfully wipe and then you can see that everything is up to the mark !
puriadeb said:
Hi,
I have tried this several times without any help.
Click to expand...
Click to collapse
flash stock cyanogen rom again. Then install TWRP. Cross check at your end. We actually don't know which process you are following!
I have a YU5510A running Quarkos and YU5010A running AOSP Extended. I also flash a lot of custom Roms but never get any issue.
did you find any solution for this i can only access cyanogen recovery and fastboot mode .
harshgoswami said:
can any one help me
what i did was, formatting the system ,data partion using wipe option in recovery (twrp), by mistake the battery got removed during the process since then the problem occured..
my yuphoria device stuck on the boot logo
is not able to mount /system /data /cache and internal storage
it is booting in fastboot mode as well as in recovery but i m not able to flash any rom, in recovery its giving the error as unable to mount /system /data /cache, showing 0mb space in internal storage and system
i also tried to flash using fastboot but giving error at the system partition sowing system write failure.. can some one identify provide me with the solution .. thanks
Click to expand...
Click to collapse
duskyrahul said:
did you find any solution for this i can only access cyanogen recovery and fastboot mode .
Click to expand...
Click to collapse
Flash stock ROM using fastboot
For yu5010a you got fastboot package
Open flash all.bat
Just remove device code
02x1ebf or anything I don't remember what it was.
Remove it from all lines
Save flash all.bat
Run it
---------- Post added at 01:29 PM ---------- Previous post was at 01:26 PM ----------
duskyrahul said:
did you find any solution for this i can only access cyanogen recovery and fastboot mode .
Click to expand...
Click to collapse
Flash stock ROM using fastboot
For yu5010a you got fastboot package
Open flash all.bat
Just remove device code
02x1ebf or anything I don't remember what it was.
Remove it from all lines
Save flash all.bat
Run it
For 5510a
Download ygdp 5.0
Select developer option
Select CBP file
Wait for tool extract it
Now minimize tool
Go to folder
Ygdp 5.0
You find here downfiles folder
Copy it and paste in c:\
Run flash all.bat
Done
---------- Post added at 01:35 PM ---------- Previous post was at 01:29 PM ----------
If any one got error in mounting using twrp
Just follow steps
Goto wipe -> advance wipe-> format data->
Type yes
Wait for process completion
Now reboot twrp to recovery
You see everything is mounted successfully.
Note :- with this step you format everything from your phone so don't reboot to system
Now connect phone with pc and copy any downloaded custom ROM in external SD
Flash it
Enjoy
Hello i get permission errors, becuase when I mount system and reboot, it unmounts it selfs, I have custom rom on honor 8 which is same version of stock... I have tryed to delete and insta roms and didnt help, still cant mount system, when I wanna change permission and its says sdcard doesnt allow to change( if you need exactly same text what it says, comment, I really need help with this) I cant use root apps and other stuffs...
Hello guys.
I have a problem with my tecno y4
firstly, i flashed a baseband zip and it success but not. after it i got a problem /system /data /cache can't be mounted or wiped.. 0 storage
i tried all ways but only system is mounted after changed the format of it to ext2 then ext4 again but the /data and /cache still the same can't be wiped or anything....
i don't have any backup
I also tried to format data and i couldn't
i have the stock rom but i have another problem with my phone it's not connected to pc i guess there's a broken ic or chip in phone because it's only charging and pc can't detect it even in device manager for manual driver installation.. all i have now is twrp 2.8.2.0 and no os installed,
i'm stuck..
should i throw my phone??
please help me i don't have phone now and I'm not able to buy i new one i really need it...