Hi...
a couple of days ago i was trying to install a rom with https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702 method
but i got error 7
then i shut it down from recovery and i was preparing another rom to write but when i wanted to power my phone on it didn't react at all
now my phone is off and not working because there is no file to work with in storage
and when i connect it to computer i get a message says : New Device Connected
and the name is a combo of Chinese and digits
is there anyone can help me?
Amir Eb said:
Hi...
a couple of days ago i was trying to install a rom with https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702 method
but i got error 7
then i shut it down from recovery and i was preparing another rom to write but when i wanted to power my phone on it didn't react at all
now my phone is off and not working because there is no file to work with in storage
and when i connect it to computer i get a message says : New Device Connected
and the name is a combo of Chinese and digits
is there anyone can help me?
Click to expand...
Click to collapse
Okay , i seems you got a big problem to your device.
Before I can help you I need few details from you.
1.What is the model and installed firmware build number and android version .
2.Have you got your bootloader unlocked?
3.can you access fastboot.
4.what actually you did before you got into this state.
5. Is TWRP/CWM installed on you phone?
6.Post a screen shot of error you got.
miststudent2011 said:
Okay , i seems you got a big problem to your device.
Before I can help you I need few details from you.
1.What is the model and installed firmware build number and android version .
2.Have you got your bootloader unlocked?
3.can you access fastboot.
4.what actually you did before you got into this state.
5. Is TWRP/CWM installed on you phone?
6.Post a screen shot of error you got.
Click to expand...
Click to collapse
thanks
1 : Honor 4C CHM-U01 and the firmware : CHM-U01C636B511
2 : Yes I've already unlocked it
3 : no i don't
4 : as i said i was installing a rom with mentioned method in OP and i got error 7 then i shut my phone down and it didn't turn on again
5 : i had TWRP but now i can't load it because my phone doesn't power on
6 : i can't (i explained above)
Amir Eb said:
thanks
1 : Honor 4C CHM-U01 and the firmware : CHM-U01C636B511
2 : Yes I've already unlocked it
3 : no i don't
4 : as i said i was installing a rom with mentioned method in OP and i got error 7 then i shut my phone down and it didn't turn on again
5 : i had TWRP but now i can't load it because my phone doesn't power on
6 : i can't (i explained above)
Click to expand...
Click to collapse
Okay first let your phone charge for 4-5 hours and check whether it can power on.
1.By pressing only power button.
2.By pressing power + Vol+ buttons.
3.By pressing Power vol- vol+ buttons simultaneously.
Post the result and later we can proceed further.
Before B511 what rom and version was present.
miststudent2011 said:
Okay first let your phone charge for 4-5 hours and check whether it can power on.
1.By pressing only power button.
2.By pressing power + Vol+ buttons.
3.By pressing Power vol- vol+ buttons simultaneously.
Post the result and later we can proceed further.
Before B511 what rom and version was present.
Click to expand...
Click to collapse
Ok
before that it was a P8 Lite Custom rom
i think Omni Rom 6.0.1
miststudent2011 said:
Okay first let your phone charge for 4-5 hours and check whether it can power on.
1.By pressing only power button.
2.By pressing power + Vol+ buttons.
3.By pressing Power vol- vol+ buttons simultaneously.
Post the result and later we can proceed further.
Before B511 what rom and version was present.
Click to expand...
Click to collapse
Hi again
I tried all those ways but still it won't power on
I guess i should take my phone to customer services
what do you think?
Amir Eb said:
Hi again
I tried all those ways but still it won't power on
I guess i should take my phone to customer services
what do you think?
Click to expand...
Click to collapse
Check clearly if the screen is on it displays in a grey colour if it doesn't.then it's better to take it to service centre.
Amir Eb said:
Hi...
a couple of days ago i was trying to install a rom with https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702 method
but i got error 7
then i shut it down from recovery and i was preparing another rom to write but when i wanted to power my phone on it didn't react at all
now my phone is off and not working because there is no file to work with in storage
and when i connect it to computer i get a message says : New Device Connected
and the name is a combo of Chinese and digits
is there anyone can help me?
Click to expand...
Click to collapse
Try to charge the phone for 2 hrs and see if it powers On
miststudent2011 said:
Okay first let your phone charge for 4-5 hours and check whether it can power on.
1.By pressing only power button.
2.By pressing power + Vol+ buttons.
3.By pressing Power vol- vol+ buttons simultaneously.
Post the result and later we can proceed further.
Before B511 what rom and version was present.
Click to expand...
Click to collapse
Amir Eb said:
Hi again
I tried all those ways but still it won't power on
I guess i should take my phone to customer services
what do you think?
Click to expand...
Click to collapse
gopinaidu77 said:
Try to charge the phone for 2 hrs and see if it powers On
Click to expand...
Click to collapse
He already tried it but no luck
Its his bad but there will be a way for sure
Related
Hello, first, srry for my bad english, can anyone help me with the next problem:
The phone start and power off on 3 seconds and i can't install roms in cellphone, this problem start without any install mod , only the cellphone shutdown and when i start it don't works. I can enter in download mode for install a rom, but in 3 seconds the phone is power off and i can't install roms. The phone is a Samsung galaxy y pro (B5510L)
Video off the problem : youtube.com/watch?v=ISTdcHc1kAE
Please help , thank you
I suggest you take the phone to a repair shop and ask them to repair it.
Umar08
brau96 said:
Hello, first, srry for my bad english, can anyone help me with the next problem:
The phone start and power off on 3 seconds and i can't install roms in cellphone, this problem start without any install mod , only the cellphone shutdown and when i start it don't works. I can enter in download mode for install a rom, but in 3 seconds the phone is power off and i can't install roms. The phone is a Samsung galaxy y pro (B5510L)
Video off the problem : youtube.com/watch?v=ISTdcHc1kAE
Please help , thank you
Click to expand...
Click to collapse
Can you boot your phone in CWM recovery?
You should charge your phone first.. Make sure your phone's battery is fully charged.
charge the phone, enter download mode while connected to a pc, flash a stock kernel with odin then flash the rom. does the recovery mode work?
Hello, first thanks for the answer, im sure the battery is fully charged, becouse i get 2 batteris off my friends and i asked them if the baterry is charged and them tell yes, and i can't get recovery mode, if i press +vol and home button and power button the phone start with the samsung model screen and power off on 3 seconds, i dont know what to do. Thanks
brau96 said:
Hello, first thanks for the answer, im sure the battery is fully charged, becouse i get 2 batteris off my friends and i asked them if the baterry is charged and them tell yes, and i can't get recovery mode, if i press +vol and home button and power button the phone start with the samsung model screen and power off on 3 seconds, i dont know what to do. Thanks
Click to expand...
Click to collapse
download stock rom for your device, launch odin, enter download mode by pressing Volume down Key + OK button+power button
EPICoverclock said:
download stock rom for your device, launch odin, enter download mode by pressing Volume down Key + OK button+power button
Click to expand...
Click to collapse
Thanks for answer, the phone enter in download mode, but in 5 seconds get power off automatically and odin haven't time to recognize the phone and now i can't power on the phone, i need remove the battery and put it again. Thanks
nothing?
brau96 said:
nothing?
Click to expand...
Click to collapse
maybe your power button is stuck, or other button is stock
Get it repaired (talk to your phone company about this e.g. Sony), i think its the only way to fix your phone.:thumbup:
Umar08
i guess its only solution possible, i want repair it becouse i dont want spent money in software repairs, but i can't... 1 thing more, i see its a problem of boot, anyone have ideas for reapair boot options? thanks
- try charging the accu externaly
- while on booting try combos of vol +/- and power button to access recovery menu
- dissasemble and check the buttons
- maybe ADB debugging interface is available over USB -> try
givemeaname said:
- try charging the accu externaly
- while on booting try combos of vol +/- and power button to access recovery menu
- dissasemble and check the buttons
- maybe ADB debugging interface is available over USB -> try
Click to expand...
Click to collapse
Im sure the battery is charged becouse i charge it on friends phones
i can't enter in recovery menu, the phone have power off before.
i dissasemble the phone and i don't see anything unusual.
and i don't undestand what its ADB debugging interface.
Thanks
Can you get your phone into recovery mode?
Umar08
Umar08 said:
Can you get your phone into recovery mode?
Umar08
Click to expand...
Click to collapse
No,i can't get phone i recovery mode. I press vol + and home and power button, and power on with samsung model phone, and automatly power off.
Thankss
brau96 said:
, and automatly power off.
Click to expand...
Click to collapse
Sounds like you have battery problem, try cleaning contacts on battery as well as phone and use another battery to test (borrow one) .
for other solutions look in My Android Solutions
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
Sounds like you have battery problem, try cleaning contacts on battery as well as phone and use another battery to test (borrow one) .
for other solutions look in My Android Solutions
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
I have tested 2 batterys, the battery has been charge by my friend becouse i can't charge it, and im sure the battery its works good in other phone , and i clean the contacts but nothing :s thanks you
when my micro usb pins inside my samsung galaxy mini where in contact and they were short circuit my phone only turned on for like 1 second then turned off
Are the batteries compatible with your phone
Umar08
Hello,
I am extremely afraid of what answers/comments I'll get but I will have to take my chances.
My situation is this - My mate 7 is stuck on the (glowing?) Huawei logo. I don't know the key combos to get into bootloader (as I am trying anything, ie - power + vol up, etc) and I don't know the combo to the recovery., as they seem to not work.
I am OK with having to start over; meaning flashing the firmware (that's the term I'm hoping) to get myself where I was. I know that I was on the B120SP04 firmware.
My question is - can anyone (please please) just guide me to get my phone back up and running. I need to know what files I can flash and which recovery I can flash it in, etc.
Please help (sorry for sounding like this, it's just that this was a gift to myself because of a very, extremely crappy year thus far).
Thanks everyone for your consideration.
shokxdauser said:
Hello,
I am extremely afraid of what answers/comments I'll get but I will have to take my chances.
My situation is this - My mate 7 is stuck on the (glowing?) Huawei logo. I don't know the key combos to get into bootloader (as I am trying anything, ie - power + vol up, etc) and I don't know the combo to the recovery., as they seem to not work.
I am OK with having to start over; meaning flashing the firmware (that's the term I'm hoping) to get myself where I was. I know that I was on the B120SP04 firmware.
My question is - can anyone (please please) just guide me to get my phone back up and running. I need to know what files I can flash and which recovery I can flash it in, etc.
Please help (sorry for sounding like this, it's just that this was a gift to myself because of a very, extremely crappy year thus far).
Thanks everyone for your consideration.
Click to expand...
Click to collapse
EDIT - to add a little more to this, and I can't believe what a moron I am, I just need to know how to get in to some type of recovery because it seems like no matter what buttons I press I can't even get into anything. So even better - is there a button combo to get into fastboot? I can then flash CWM recovery from there and end my fears of having a phone that doesn't work.
Thanks again all...
shokxdauser said:
EDIT - to add a little more to this, and I can't believe what a moron I am, I just need to know how to get in to some type of recovery because it seems like no matter what buttons I press I can't even get into anything. So even better - is there a button combo to get into fastboot? I can then flash CWM recovery from there and end my fears of having a phone that doesn't work.
Thanks again all...
Click to expand...
Click to collapse
Mate and off to the USB cable now 10 seconds the Power button + Volume Down and hold until you're in the fast boot mode.
shokxdauser said:
Hello,
I am extremely afraid of what answers/comments I'll get but I will have to take my chances.
My situation is this - My mate 7 is stuck on the (glowing?) Huawei logo. I don't know the key combos to get into bootloader (as I am trying anything, ie - power + vol up, etc) and I don't know the combo to the recovery., as they seem to not work.
I am OK with having to start over; meaning flashing the firmware (that's the term I'm hoping) to get myself where I was. I know that I was on the B120SP04 firmware.
My question is - can anyone (please please) just guide me to get my phone back up and running. I need to know what files I can flash and which recovery I can flash it in, etc.
Please help (sorry for sounding like this, it's just that this was a gift to myself because of a very, extremely crappy year thus far).
Thanks everyone for your consideration.
Click to expand...
Click to collapse
Lol nothing to get to much worried about.
Just download firmware of your mate 7.....MT7-L09......Once downloaded you will see a file named "update.app" (you may have to unzip a file to get this file "update.app"
Now from ur pc transfer the "update.app" on ur sdcard in folder having name "dload"(you have to create this folder)
New put your sdcard in your mobile
Now press vol up , vol down and power key simultaneously for 5 to 10 secs approx.
Now the phone will automatically install firmware in your mobile and your will running again normally.
Give feedback if it worked or not?
Sent from my HUAWEI MT7-L09 using XDA Free mobile app
hannanzikrea said:
Now press vol up , vol down and power key simultaneously for 5 to 10 secs approx.
Click to expand...
Click to collapse
only vol up, vol down, then power. not all three simultaneously! Otherwise it will not work.
Fooox1 said:
only vol up, vol down, then power. not all three simultaneously! Otherwise it will not work.
Click to expand...
Click to collapse
Well I always press these keys simultaneously and it always works for me....I have even tried it on mate
My previous phone was ascend p6 ...
Sent from my HUAWEI MT7-L09 using XDA Free mobile app
hannanzikrea said:
Well I always press these keys simultaneously and it always works for me....I have even tried it on mate
My previous phone was ascend p6 ...
Sent from my HUAWEI MT7-L09 using XDA Free mobile app
Click to expand...
Click to collapse
OK sorry all I'm now trying all the suggestions, thanks for them. I had to charge my phone since I don't even know how to turn it off. It was still at the Huawei glowing symbol (powered by Android at the bottom). From this exact point, do I just hold vol up and vol down for 5-10 seconds then press power button to get it into fastboot?
Thanks again
You insert an SD containing a folder dload that is containing UPDATE. APP. You hold vol + and vol - and power until your mate starts to flash this Update.app file you've placed on your SD.
pappschlumpf said:
You insert an SD containing a folder dload that is containing UPDATE. APP. You hold vol + and vol - and power until your mate starts to flash this Update.app file you've placed on your SD.
Click to expand...
Click to collapse
I've prepared the SD card. However I had a CM based recovery installed - the file was MT7-CWM-EN.img. Right before I started my post here, I tried to fastboot what I thought was the original recovery - file named RECOVERY-ori.img. Does it matter what recovery (CWM or stock) to use to flash this? or do I just use your button combo? One last question (sorry if I am taking too long to understand) - I'm guessing there has to be nothing else on the SD card but the dload/update.app?
Thanks
shokxdauser said:
I've prepared the SD card. However I had a CM based recovery installed - the file was MT7-CWM-EN.img. Right before I started my post here, I tried to fastboot what I thought was the original recovery - file named RECOVERY-ori.img. Does it matter what recovery (CWM or stock) to use to flash this? or do I just use your button combo? One last question (sorry if I am taking too long to understand) - I'm guessing there has to be nothing else on the SD card but the dload/update.app?
Thanks
Click to expand...
Click to collapse
Thanks everyone. I eventually got it to software update mode and it's back and working.
Hello!
I tried flashing another ROM to my S8+. The ROM was downloaded from SAMMOBILE and I followed the instructions step by step. While flashing with Odin ( Odin was downloaded from the link they provide on their site ), 5 seconds after I pressed START the phone just powered off after I pressed the bixby button by mistake. Now, the phone won't even power on and the led isn't turning on when I charge the phone! What can I do? Worked so hard for this phone!!
maicanvlad7 said:
Hello!
I tried flashing another ROM to my S8+. The ROM was downloaded from SAMMOBILE and I followed the instructions step by step. While flashing with Odin ( Odin was downloaded from the link they provide on their site ), 5 seconds after I pressed START the phone just powered off after I pressed the bixby button by mistake. Now, the phone won't even power on and the led isn't turning on when I charge the phone! What can I do? Worked so hard for this phone!!
Click to expand...
Click to collapse
Hi mate
did you flash the right firmware?
try pressing power button+ volumen down for several seconds (soft reset)
Try pressing - releasing the 3 button combo( to download mode) several quick times
MAX 404 said:
Hi mate
did you flash the right firmware?
try pressing power button+ volumen down for several seconds (soft reset)
Try pressing - releasing the 3 button combo( to download mode) several quick times
Click to expand...
Click to collapse
I am from Romania and I installed this one sammobile.com/firmwares/galaxy-s8-plus/SM-G955F/ROM/download/G955FXXU1CRC7/213035/
I tried both of the above and nothing happens. Also, I get no led or charging animation when I plug my phone in. Is it RIP?
MAX 404 said:
Hi mate
did you flash the right firmware?
try pressing power button+ volumen down for several seconds (soft reset)
Try pressing - releasing the 3 button combo( to download mode) several quick times
Click to expand...
Click to collapse
Hello man!
I checked 3 times and it is the right firmware.
I did bot of the above and nothing happens... No vibration....nothing. Also when I plug it in I get no LED or charging animation. Completely dead....( Is it RIP?
maicanvlad7 said:
Hello man!
I checked 3 times and it is the right firmware.
I did bot of the above and nothing happens... No vibration....nothing. Also when I plug it in I get no LED or charging animation. Completely dead....( Is it RIP?
Click to expand...
Click to collapse
Was it fully charged when it when off?, maybe let it discharge overnight
Try to charge it with a different cable/charger
Make sure that none of the buttons are stuck, press them one by one to make sure they work properly
Press power on , plug it into your pc and see if the device is recognized
do all of the above with the SIM and memory card out.....
What setting did you have in odin....
What it was flashing when you pressed the bixby button?
MAX 404 said:
Was it fully charged when it when off?, maybe let it discharge overnight
Try to charge it with a different cable/charger
Make sure that none of the buttons are stuck, press them one by one to make sure they work properly
Press power on , plug it into your pc and see if the device is recognized
do all of the above with the SIM and memory card out.....
What setting did you have in odin....
What it was flashing when you pressed the bixby button?
Click to expand...
Click to collapse
Hi again and thank you so much for all the help!
I had around 70% battery life so there was no chance it went from 70 to 0 in 5 mins.
It can not discharge because it's turned off and I can't make it power back on
I was flashing the AP file and 3 seconds after I hit start in odin the phone just powered off. All the buttons are working properly and there is no SIM/memory card in it.
If I press the power button nothing happens...same when I connect it to my PC....nothing
The phone is dead and so am I ))
maicanvlad7 said:
Hi again and thank you so much for all the help!
I had around 70% battery life so there was no chance it went from 70 to 0 in 5 mins.
It can not discharge because it's turned off and I can't make it power back on
I was flashing the AP file and 3 seconds after I hit start in odin the phone just powered off. All the buttons are working properly and there is no SIM/memory card in it.
If I press the power button nothing happens...same when I connect it to my PC....nothing
The phone is dead and so am I ))
Click to expand...
Click to collapse
Hi
Just the AP file what about the other 3 BL , CP and CSC? and what Odin setting you had?
My best guess is that the hardware is in an undetermined state ..not necessarily bricked but it may be
Keep pressing the buttons , try to get into download you may get lucky and catch the hardware "awake" and let you get into download mode...if so flash the firmware again...all 4 files
MAX 404 said:
Hi
Just the AP file what about the other 3 BL , CP and CSC? and what Odin setting you had?
My best guess is that the hardware is in an undetermined state ..not necessarily bricked but it may be
Keep pressing the buttons , try to get into download you may get lucky and catch the hardware "awake" and let you get into download mode...if so flash the firmware again...all 4 files
Click to expand...
Click to collapse
Just the AP file... noob mistake I guess? Pretty expensive one might be...
I will leave it charging over night I hope tomorrow it will work....by any chance.
Really appreciate the help dude!
maicanvlad7 said:
Just the AP file... noob mistake I guess? Pretty expensive one might be...
I will leave it charging over night I hope tomorrow it will work....by any chance.
Really appreciate the help dude!
Click to expand...
Click to collapse
If you are in the same base , Nougat to Nougat, flashing just one of them should not be too bad..but when changing base Nougat to Oreo...that is not a very good idea, is complete different firmware and they may not be 100% compatible
lets cross fingers and hope for the best
maicanvlad7 said:
Just the AP file... noob mistake I guess? Pretty expensive one might be...
I will leave it charging over night I hope tomorrow it will work....by any chance.
Really appreciate the help dude!
Click to expand...
Click to collapse
Hey, did you manage to start your device again normally?
I'm having the exact same issue and there doesn't seem to be any solution online.
Hello it's me (maicanvlad7) but from a guest account. It didn't start so I was forced to use the warranty. Depending on your location you might or might not be able to use the warranty. There is no software solution for this problem, none that I know of at least. Best of luck man!
maicanvlad77 said:
Hello it's me (maicanvlad7) but from a guest account. It didn't start so I was forced to use the warranty. Depending on your location you might or might not be able to use the warranty. There is no software solution for this problem, none that I know of at least. Best of luck man!
Click to expand...
Click to collapse
Oh, that's bad to hear. Thank you very much for your reply though, I'll contact Samsung and I'll see what I can do.
Greetings, have a nice day.
Hi guys! A friend give me this phone, a30s but i tryed to reset it and i cannot open it because i must typoe the latest google account that was on the phone, but i tried to install with odin the stock software and give me this error (An error has occured while updating the device software. use the emrgency recovery function in the smart switch pc software). and now i dont know what to do beucase i cant even power off it.
need help because i don t know how to do next because i;m noob in all this things!
Is it locked or u just cant?
Lil kuzo said:
Is it locked or u just cant?
Click to expand...
Click to collapse
i can t even power off. it only stays up with that error. i tried with smart switch and emergency recovery but it didnt find my phone there.
country
djsoryn said:
i can t even power off. it only stays up with that error. i tried with smart switch and emergency recovery but it didnt find my phone there.
Click to expand...
Click to collapse
where are you from? and which model you have? and which frimware you used and how you flashed it
Akshar1420 said:
where are you from? and which model you have? and which frimware you used and how you flashed it
Click to expand...
Click to collapse
I'm from romania, i have the model sm-a307fn, i used this firmware A307FNXXU2BTG1_A307FNOEM2BTG1_ROM and i flashed using odin and this gave me the error
djsoryn said:
I'm from romania, i have the model sm-a307fn, i used this firmware A307FNXXU2BTG1_A307FNOEM2BTG1_ROM and i flashed using odin and this gave me the error
Click to expand...
Click to collapse
send me the photos on this +91 9023564990
Finish the battery power of the phone and leave it for 2 days or so (in Download mode and *not* connected to odin) for faster battery usage, or anywhere as long as it on
After that power it to recovery mode with the volume up button and the power button but press em right after inserting the power cord (cable to your phone to charge it so it can boot to recovery)
When the Samsung thingies pop up release the power button and don't release the volume up button
Press till u see the recovery menu and then wipe cache and then factory reset it :cyclops:
Mostly likely it's gonna need the previous Google account details, I'll research on how to frp bypass the Google lock
Akshar1420 said:
send me the photos on this +91 9023564990
Click to expand...
Click to collapse
this is an whatsapp account ?
Lil kuzo said:
Finish the battery power of the phone and leave it for 2 days or so (in Download mode and *not* connected to odin) for faster battery usage, or anywhere as long as it on
After that power it to recovery mode with the volume up button and the power button but press em right after inserting the power cord (cable to your phone to charge it so it can boot to recovery)
When the Samsung thingies pop up release the power button and don't release the volume up button
Press till u see the recovery menu and then wipe cache and then factory reset it :cyclops:
Mostly likely it's gonna need the previous Google account details, I'll research on how to frp bypass the Google lock
Click to expand...
Click to collapse
Thanks mate, i will try this after the battery will be empty
djsoryn said:
this is an whatsapp account ?
Click to expand...
Click to collapse
yes
Akshar1420 said:
yes
Click to expand...
Click to collapse
this is the correct number? i added to my phone but he didn\t seems that is an whatsapp contact
djsoryn said:
this is the correct number? i added to my phone but he didn\t seems that is an whatsapp contact
Click to expand...
Click to collapse
use +91 then 9023564990
anyone can help me how fix this, bootloop on twrp logo and can't flash to stock recovery. I hope someone help me
I wanna back to factory recovery, tell me how to remove that ???
Model : SM-A750GN/DS
Scytheria said:
anyone can help me how fix this, bootloop on twrp logo and can't flash to stock recovery. I hope someone help me
Click to expand...
Click to collapse
Tern off phone with hold press vol down and power and when turned of connect charging cable and press vol down with vol up in the same time you will go to bootloader then flash stock
I such you have that issues with twrp of you fixed it tell me
play 5 said:
Tern off phone with hold press vol down and power and when turned of connect charging cable and press vol down with vol up in the same time you will go to bootloader then flash stock
I such you have that issues with twrp of you fixed it tell me
Click to expand...
Click to collapse
Unfortunelly, that not work, any have solution ?
Scytheria said:
Unfortunelly, that not work, any have solution ?
Click to expand...
Click to collapse
Dont say dont work im such you im have serched for this issues fixs more than 4 haur
Serch in youtube how to openA7 2018 bootloader
And dont lost you need to tern off phone then go to bootloader
If you pressed down vol with power in first 7 second it will be restart dont stop of pressing if the screen blacked for second time press vol up & down in some time
-Without power!!
And need your phone change with cable when you do all of thise↑
Firs take cable on your phone then do all of i writed then reply to me
play 5 said:
Dont say dont work im such you im have serched for this issues fixs more than 4 haur
Serch in youtube how to openA7 2018 bootloader
And dont lost you need to tern off phone then go to bootloader
If you pressed down vol with power in first 7 second it will be restart dont stop of pressing if the screen blacked for second time press vol up & down in some time
-Without power!!
And need your phone change with cable when you do all of thise↑
Firs take cable on your phone then do all of i writed then reply to me
Click to expand...
Click to collapse
THANKS A LOT MAN. I LOVE U SO MUCH !!!
Scytheria said:
THANKS A LOT MAN. I LOVE U SO MUCH !!!
Click to expand...
Click to collapse
You sloved it right?
play 5 said:
You sloved it right?
Click to expand...
Click to collapse
yeah man, thanks a lot for help me
Scytheria said:
anyone can help me how fix this, bootloop on twrp logo and can't flash to stock recovery. I hope someone help me
I wanna back to factory recovery, tell me how to remove that ???
Model : SM-A750GN/DS
Click to expand...
Click to collapse
Hey,
I have the same problem with the bootloop and the corrupted locking screen. I'm able to boot into download mode, but I can't figure out which system to flash. I tried several ones, but none of them worked... and I can't get back to the factory recovery. If somebody has an idea which recovery system could work I would be very pleased to know.
Software used to Flash: Odin
Device: a750fnxxu4ctc4
Scytheria said:
THANKS A LOT MAN. I LOVE U SO MUCH !!!
Click to expand...
Click to collapse
Hey , you gotta help me out here please !! i am not able to boot into download mode.
press all buttons at once (volume down + volume up + power button) until the screen turns black. Than immeadiatly press volume up and volume down button and insert cable connected to pc.