when i try to flash my SM N915V and then i get this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At the Phone said like this:
IMG too big
How i can fix it?
Someone please help me
Are you flashing a custom rom or one from another region? Looks like your system img dies not match the data in your PIT file.
Flashing a stock rom should make it okay
Sent from my SM-N915G using Tapatalk
Related
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6200_CODE_P6200JPKK3_CL585880_REV02_user_mid_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> zImage
<ID:0/004> recovery.img
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> cache.img
<ID:0/004> RQT_CLOSE !!
--------------------------------------------
after i tried several times to instal official honeycomb that what i get i need help or assistant on how to get my Gt-P6200 to instal back the official firm ware i tried every thing and cant get it to work any advice people .
Hello!
I recently got a S4 mini and decided to root so I could have an extended memory using link2sd! Everything was perfect but later the KITKAT update started to roll out, so i decided to go back to stock so I could update my phone... I downloaded a stock Rom from Sammobile and used odin to flash it... It keeps saying that EXT4 failed! So now its stuck in download mode! When I try to root just to see if it fixes anything it makes the Samsung boot sound and then the screen goes black.. I try reflashing the 4.4.2 Rom but it keeps failing!
Here is what ODIN3 3.0.7 says:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCNEA_I9195VFRCNE4_I9195XXUCNEA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> NON-HLOS.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Please tell me a fix because its stuck in firmware upgrade fail screen!
Also Kies wont detect it and i have installed USB drivers for my phone!
Also please don't say that I shouldn't have rooted and stuff because it is too late for that.
BTW I am going to thank (like) anyone who fixes this!
Yiannis1 said:
Hello!
I recently got a S4 mini and decided to root so I could have an extended memory using link2sd! Everything was perfect but later the KITKAT update started to roll out, so i decided to go back to stock so I could update my phone... I downloaded a stock Rom from Sammobile and used odin to flash it... It keeps saying that EXT4 failed! So now its stuck in download mode! When I try to root just to see if it fixes anything it makes the Samsung boot sound and then the screen goes black.. I try reflashing the 4.4.2 Rom but it keeps failing!
Here is what ODIN3 3.0.7 says:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCNEA_I9195VFRCNE4_I9195XXUCNEA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> NON-HLOS.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Please tell me a fix because its stuck in firmware upgrade fail screen!
Also Kies wont detect it and i have installed USB drivers for my phone!
Also please don't say that I shouldn't have rooted and stuff because it is too late for that.
BTW I am going to thank (like) anyone who fixes this!
Click to expand...
Click to collapse
Try a different ROM. I had the same problem with the NEA one but the NE6 loads OK.
Hello Guys,
I really need help with this. I flashed from 5.0.1 AOE3 (France) to a 5.1.1 BOF2 (Netherlands Vodafone) and now i'm stuck!
It shows this:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU2POFC_G920FVFG2BOF2_G920FXXU2POFC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please give me advise how i can solve this??
Many thanks!
Alfa
Try using the Emergency option in Kies3, it might help download the version your phone is registered for
You may:
1 . Try another USB cableas defective ones can cause unnecessary disconnections.
2. Plug to a different USB port then flash again.
3. Redownload the ROM as errors can result from download failures.
4. Reflash again and again until you succeed. Took me 4 flash attemps to get my 1st successful flash.
samsung galaxy beam gt-i8530
i tried to flash it to stock rom and odin fails heres the log:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8530DXLJ1_I8530OLBLJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cache.img.md5
<ID:0/004> NAND Write Start!!
<ID:0/004> hidden.img.md5
<ID:0/004> kernel.bin.md5
<ID:0/004> modem.bin.md5
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
anyone can help please ?
can anyone help me out there ?
Hey guys, Im having some issues with my samsung note 4 SM-N910G 5.1.1 lollipop. Yesterday I tried to flash the stock rom which I downloaded from sammobile, but it didn't work as it took forever. Now the problems Im encountering is that the phone can't enter recovery mode by pressing vol up+home+power. Instead, it shows a similar downloading screen as when vol+down, but the top message shows "unable to boot" or something. Now Im trying to flash the stock firmware, but it takes forever and doesn't seem to move, as follows:
Ok, it just failed flashing:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910GDTU1COJ5_N910GOLB1COJ1_N910GDTU1COJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I boot it up normally by pressing power button, it goes into a bootloop.
Hope to receive some help here.
Thanks.
Fixed it. Thanks for the prompt replies.