Please help! Stuck in odin after flashing 5.1.1 - Galaxy S6 Q&A, Help & Troubleshooting

Hello Guys,
I really need help with this. I flashed from 5.0.1 AOE3 (France) to a 5.1.1 BOF2 (Netherlands Vodafone) and now i'm stuck!
It shows this:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU2POFC_G920FVFG2BOF2_G920FXXU2POFC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please give me advise how i can solve this??
Many thanks!
Alfa

Try using the Emergency option in Kies3, it might help download the version your phone is registered for

You may:
1 . Try another USB cableas defective ones can cause unnecessary disconnections.
2. Plug to a different USB port then flash again.
3. Redownload the ROM as errors can result from download failures.
4. Reflash again and again until you succeed. Took me 4 flash attemps to get my 1st successful flash.

Related

[Q] Soft Bricked VZ Note 2 using Casual

HELP
So, I should have read more thoroughly. I guess the Casual OneClick will not work with version 4.1.2 and soft bricked the phone.
So my fault.
I launched Odin to revert back to 4.1.1 but now Odin keeps failing and I can not recover.
I'm kind of a noob and don't know what else to do.
Odin Log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> param.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT, my phone is back! sorry for the posts...I was in a bit of a panic
The solution was here: http://forum.xda-developers.com/showthread.php?p=41008476&nocache=1

Can't get into recovery, ODIN fails at sboot.bin

I also can't flash stock
ODIN says this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try using another micro USB cable. I had the same problem as yours. Changing to a different cable solved it.
you should share complete model name and rom which you are trying to flash will help me to guide you a lot

odin fail to flash my 920l.help me

i try to flash my g920l with the file"G920LKLU3COJ2_G920LLUC3COJ2_G920LKLU2COJ2_HOME.tar" but odin faild to flash
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
help me
// my phone still boot into normal but the wifi is hard to switch ON so i try to flash my phone

Samsung galaxy beam gt-i8530 flash stock rom using odin fail!

samsung galaxy beam gt-i8530
i tried to flash it to stock rom and odin fails heres the log:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8530DXLJ1_I8530OLBLJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cache.img.md5
<ID:0/004> NAND Write Start!!
<ID:0/004> hidden.img.md5
<ID:0/004> kernel.bin.md5
<ID:0/004> modem.bin.md5
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
anyone can help please ?
can anyone help me out there ?

Cant flash official 7.0. ROM

Hello,
I had the official samsung 6.0.1 rom on my S6 Edge F version and now I tried to install the 7.0 nougat official ROM on the same s6 edge.
This is the error message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin 3.11 and just selection the ROM at AP. And now I cant boot anymore, getting "use smart switch"-message. Why is this happening? How can I fix this?
Thanks in advance.
Turkishflavor said:
Hello,
I had the official samsung 6.0.1 rom on my S6 Edge F version and now I tried to install the 7.0 nougat official ROM on the same s6 edge.
This is the error message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin 3.11 and just selection the ROM at AP. And now I cant boot anymore, getting "use smart switch"-message. Why is this happening? How can I fix this?
Thanks in advance.
Click to expand...
Click to collapse
Take the latest version of Odin. (Odin3 v3.12.3)
https://forum.xda-developers.com/showthread.php?t=2711451
1.wipe
2.Flash with latest Odin bininga59 said you!
3. wipe once again, restart the device!
Done.
Turkishflavor said:
Hello,
I had the official samsung 6.0.1 rom on my S6 Edge F version and now I tried to install the 7.0 nougat official ROM on the same s6 edge.
This is the error message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin 3.11 and just selection the ROM at AP. And now I cant boot anymore, getting "use smart switch"-message. Why is this happening? How can I fix this?
Thanks in advance.
Click to expand...
Click to collapse
what's your region firmware (csc) & baseband you try flashed?
if you have an international model sm-g920F, be careful what firmware you download, dont download the ones that vodafone e.g. creates, take the one for your country without the company name

Categories

Resources