Hi there!
i´ve a little issue and i want to know if someone can help me,
After a long time connected the keyboard dock to the tablet and I realized that when i write the keys has lag or doesn´t detect some letters, which didn´t happen with the original rom.
My intention is to re flash the katkiss rom, but I have the following problem.
When I exceed the brightness on 75% the screen goes black, when I android boot´s i can reduce the brightness and I can see normally, but when booting in twrp the brightness automatically gets to the max and I can´t see the screen.
Any idea to make a full wipe (by flashing the original rom and then upgrade) or how to remap the keyboard to make it works fine again without recovery.
Sorry for my bad english, i tried to do my best
Thanks!
Related
Hi everyone,
Is there anyway to hide the mouse cursor when using the docks touchpad?
Im using DosBox Turbo and its very confusing when you can see 2 mouse cursors on the screen, Does anyone know if it can be hidden either within the emulator settings or the TF101 settings.
Many thanks in advanced.
Needs a version of CWM recovery, flash the preferred zip. (No-circle in your case)
Pointer without circle click.
Thanks for your quick reply,
Ive flashed the zip but now its stuck on the Asus loading screen with the circle.
Any ideas?
Im on ICS Revolver.
The zip was designed for aosp based w.w so it might cause problems. You can get into recovery fine right? try reflashing the revolver rom over it and should boot up
Yep ive reflashed the Rom and everythings back to normal, I should read the entire thread before I jump in and start flashing things ,
Anyway this is on hold at the moment because now my transformer wont charge due to a loose connection in the usb cable, Thing is aswell I dont think theres anywhere locally were I can by one so gonna have to order online and wait
Update:
New usb cable arrived today and tablet now fully charged.
Still havent got rid of my cursor at the moment, Im happy with my current rom and dont fancy changing it, Does anyone know if there are any mods to Revolver rom to hide the cursor or can the other mod by modified??
OK so I downloaded & installed the latest OTA update (RV23RC03; 1.057) with the power mode choices, and it has completely destroyed my touch screen response! I previously had ZERO problem with this- every key press registered on both the original ROM and the 1st update. Since the latest update, everything takes 2 or 3 presses, sometimes VERY firmly, many times still without registering. This totally sux
Is anyone else having this issue? I should note that I do have a matte screen protector on; this previously caused NO problems.
Is there an easy reasonably safe way to revert back to the 1st update (RV07RC06; 1.029)? A link and/or instructions appreciated. Thanks.
Acer, are you out there? This exact issue occurred with my A510 on its 1st update, after which it became nearly unusable for me. Since it was < 30 days I was able to return it. No such luck this time. Why are these updates doing this? It's driving me nuts!
No issues with touch on update. It seems to be running better actually.
Try to completely reset thru recovery with wipe data maybe.
More specific instructions
Itchiee said:
No issues with touch on update. It seems to be running better actually.
Try to completely reset thru recovery with wipe data maybe.
Click to expand...
Click to collapse
That's so amazing. I went from no problem at all, to I can hardly use this any more; only thing that changed was the update.
Can you please be specific about how to reset through recovery. (Step-by-step if possible) and how to wipe data.
Thanks.
You can reset data thru settings/privacy but you will lose everything and start fresh.
I'll check on the other method later on for you.
Also turn up touch sensitivity in settings/display if you haven't...
Edit - it appears that the stock recovery doesnt have those options.
You can still reset by inside ICS like above, or...
Factory Reset:
WARNING: reset will start immediately
Volume button (one dot) and Power button, once buzzes release power button and then toggle the rotation switch on and off a few times
Yes of course, I have set screen sensitivity to high. I think I'd rather go back to 1st update, rather than wipe everything (I do have a backup but it's still a hassle). I can't believe no one else is having this problem.
Any idea how to revert to last update?
Someone in a german android forum mentioned that it help on his device after the update to set the sensitivity to the lowest setting and then back to middle or high.
I tried playing with sensitivity settings, turning on/off,resetting and no luck.
I actually found the ROM from before the update on this website and flashed it as update.zip with vol +power. It worked, I now have 1.029 back and touch screen works perfectly. I'm sorry to lose power management but i think I'll stay where I am . Don't ask me about a Jellybean update; I'll want it but after this I'll be afraid to try it. If anyone has an explanation for this i'd love to hear it.
So I have a problem with my CUBE U30GT-H. I bought it almost 3 months ago, all have worked very well, but now touch screen doesn't.
Problem occurs when I have to unlock screen, it simply doesn't work after sleep. But when I restart it works again, tablet totally works with my mice. I tried to wipe cache and reinstall firmware, but nothing changed. So i think it will be a good option if touch screen doesn't shut down when tablet put to sleep. I was searching for a touch screen config, but didn't find. I hope you can help me with problem and give some ideas.
Now I use this firmware Evolution JB 1.0.2 ( flashmyandroid.com/forum/showthread.php?1192-Release-Evolution-JB-1-0-2-27-08-2012 )
P.S. I am new on this forum so I don't know where to put this question. sorry...
Hello guys!
I've a funny problem with my tablet that is a Mediacom Smartpad 722i based on AML8726-M3.
When it is doing nothing, sometimes when i wakeup it, it remains locked on a black screen and i've to wait that it's battery is discharged or i've to put the charge connector and it wakeup.
When it wakeup and is unlocked or at the next reboot, the system data is on 02/01/1970 O.O and for 1-2 minutes it was very slowly.
I noticed that when it is on black screen, on the side of the touchscreen where is the CPU, the screen is hot and from the speakers the tablet put out some noice.
For this, i think when it is locked on black screen, it is doing something and for this the side of CPU is hot.
I think it is a problem of the stock ROM, the stock ROM is a 4.0.4 ICS.
Other users of other tablets resolved this problem with Clocksync, but in this case it was useless.
What do you think? How i can solve this problem?
The stock rom on the tablet is the last update from Mediacom.
Thanks
Anyone can help me?
This happens sometimes with all devices it is either an app or the system freezing wile the cpu is under a heavy load. When you press your power button dose the screen come on with a black glow or stay completely off. I would suggest doing a factory reset and check for any updates, or even better custom rom. I would suggest you dont use any restore features after your reset as this could restore the cause of the problem. I would suggest going on your computer to the play store installing all the apps you want remotely. Its faster atleast for me to scroll threw the website and set all my favorite apps to install then trying to scroll threw the store on my phone wile its slow from downloading apps.
I dont have your device but I have had a few tabs. There may be a reset button some where or try holding all the buttons for 15 seconds to restart your tab when it is frozen like this.
Hope This Helped
I am also interested in me you solved?
Hi all,
I have been given a tablet to try and recover by a friend who seems to have semi-bricked it. I heard that he ticked the wrong buttons in Odin and then it all went downhill from there...
See the attachment: This graphical screen is displayed all the time. I cant actually shut the tablet down, even if I boot into CWM and choose shutdown from there. It will turn the entire screen of for 2 seconds and then then go into the attached funky graphics screen and stay there.
There is no battery charge at the moment so the odd time I do get it to boot properly, it shuts down straight away. Im leaving it chargin as we speak to rule that out.
I've tried flashing a stock ROM and get an error7. I have wiped and reset the tablet and wiped both caches too.
My next move is to (after its charged) download and apply a ROM from the samsung website and see if I can return it to normal.
I really want to know why I cant shut it off and what's the deal with the weird graphics screen? Any step by step instruction on how to reset properly and what I should do would be SUPERB.