Database Info

Guide: Huawei Rollback and firmware version change guide; Back TO BLN-L21C185

To get to Andorid 7, I used Firmware finder method as send to updated and flashed "BLN-L21C432B342" Firmware finder send to update method.
Most of the updated using from: http://hwmt.ru/oth/HWFF/info/view.php?find_model=bln but it does not have second update package which is needed to flash to get the updater app and others.
Guide to get back to BLN-L21C185
DIAL: *#*#2846579#*#*
GO TO : 2.Veneer Information >
1.Version info >>Manufacture Information is your actual model: (my is: BERLIN_L21 i.e.: BLN-L21)
Scroll to end there will be current version, this is the version you need to use to roll back.
My was Bln-l24
1. So i downloaded the BLN-L24 USA Roll back package.
2. And downloaded the BLN-L24 Latest Andorid 6 update. (BLN-L24C567B110)
both FROM: http://www.huawei.com/usmobile/consumer/support/downloads/index.htm
Above are flashed using Sd card dload method and they worked. 1st flash roll back package and let the phone start to normal than again flash the android 6 package "BLN-L24C567B110".
Now you are back to BLN-L24 but setting is showing BLN-L110.
Anyways now you have updater app back so use the same method to get back to BLN-L21C185B131 (android mm).
I did not roll back and instead flashed BLN-L21C185B342 as it is available now, using firmware finder send to update: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146 and bingo back to C185 andorid 7 with updater app.
FACTORY RESET YOUR PHONE IN THE END.

My phone was on BLN-L21C185B131. I installed firmware finder on my PC and downloaded BLN-L21C185B342 from there. From update.zip extracted update.app and installed using dload method. At the end of the update the message was something like "update failed". Now "System update" is missing in settings, factory reset is not working properly (it resets the phone but there is a message during the reset that Factory reset failed) and the build number is "NRD90M test-keys".
Please advice how I can fix it. Tnx

Tangra said:
My phone was on BLN-L21C185B131. I installed firmware finder on my PC and downloaded BLN-L21C185B342 from there. From update.zip extracted update.app and installed using dload method. At the end of the update the message was something like "update failed". Now "System update" is missing in settings, factory reset is not working properly (it resets the phone but there is a message during the reset that Factory reset failed) and the build number is "NRD90M test-keys".
Please advice how I can fix it. Tnx
Click to expand...
Click to collapse
You should have used the method sent to updater.. anyways you have to flash the second half part of it.. "
update_data_full_BLN-L21_hw_meafnaf.zip"
I am uploading the second part which you should be able to flash using dload to get the complete update with updater working.
Will share the link soon.

How is it
omair.anwer said:
To get to Andorid 7, I used Firmware finder method as send to updated and flashed "BLN-L21C432B342" Firmware finder send to update method.
Most of the updated using from: http://hwmt.ru/oth/HWFF/info/view.php?find_model=bln but it does not have second update package which is needed to flash to get the updater app and others.
Guide to get back to BLN-L21C185
DIAL: *#*#2846579#*#*
GO TO : 2.Veneer Information >
1.Version info >>Manufacture Information is your actual model: (my is: BERLIN_L21 i.e.: BLN-L21)
Scroll to end there will be current version, this is the version you need to use to roll back.
My was Bln-l24
1. So i downloaded the BLN-L24 USA Roll back package.
2. And downloaded the BLN-L24 Latest Andorid 6 update. (BLN-L24C567B110)
both FROM: http://www.huawei.com/usmobile/consumer/support/downloads/index.htm
Above are flashed using Sd card dload method and they worked. 1st flash roll back package and let the phone start to normal than again flash the android 6 package "BLN-L24C567B110".
Now you are back to BLN-L24 but setting is showing BLN-L110.
Anyways now you have updater app back so use the same method to get back to BLN-L21C185B131 (android mm).
I did not roll back and instead flashed BLN-L21C185B342 as it is available now, using firmware finder send to update: https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146 and bingo back to C185 andorid 7 with updater app.
FACTORY RESET YOUR PHONE IN THE END.
Click to expand...
Click to collapse
What about themes app is it work and are there a rollback package if you didn't like it

First of all thanks for this wonderful post, you did a great job.
Don't mind it but you have made a great post, without a great title/name, so i suggest you to modify the title of the post, these kind of posts are very helpful for people like me and others but most of the people out there use google to search help they don't know the XDA, so if you modify and give a better title to your thread it will be easily found by searchers.
Lastly what is the main difference of numbers after BLN-L21 i.e. mine is L21C185 on the about phone but the hidden info *#*#2846579#*#* and Veneer Information and version information says at Manufacturer Information BERLIN_L21_VN1 AP Version is L21C900B131_SYSTEM while the Parameter Version says C185, NOW what is my devices real name and which firmware should i be downloading for my device if i want to roll back to 6.0.1?

Mohammad.b said:
What about themes app is it work and are there a rollback package if you didn't like it
Click to expand...
Click to collapse
Theme app is working.

omair.anwer said:
You should have used the method sent to updater.. anyways you have to flash the second half part of it.. "
update_data_full_BLN-L21_hw_meafnaf.zip"
I am uploading the second part which you should be able to flash using dload to get the complete update with updater working.
Will share the link soon.
Click to expand...
Click to collapse
Link. It's only drive so can only keep it for about a month. By then I hope more people have uploaded it else where.
https://drive.google.com/file/d/0B_aM97XRoZYwSFpNeUstb2ZyaFE/view?usp=drivesdk

talvigi said:
First of all thanks for this wonderful post, you did a great job.
Don't mind it but you have made a great post, without a great title/name, so i suggest you to modify the title of the post, these kind of posts are very helpful for people like me and others but most of the people out there use google to search help they don't know the XDA, so if you modify and give a better title to your thread it will be easily found by searchers.
Lastly what is the main difference of numbers after BLN-L21 i.e. mine is L21C185 on the about phone but the hidden info *#*#2846579#*#* and Veneer Information and version information says at Manufacturer Information BERLIN_L21_VN1 AP Version is L21C900B131_SYSTEM while the Parameter Version says C185, NOW what is my devices real name and which firmware should i be downloading for my device if i want to roll back to 6.0.1?
Click to expand...
Click to collapse
Hi, i understand if information is not easy to find it of little value suggest me a name and i will change it.
If you are on android 7 you need to first download the roll back package of the "version component version" showing in veneer info and flash it, then flash the same version android 6 latest package. Then use the firmware finder send to update method to get back to your real version either andoid 6 or android 7 as your prefer.
I have seen c185 is used used for middle east market.
"Manufacturer version" is your real device variant. (your need to download this to roll back with the roll back package if your are on android 7)
"version component version" is your current installed firmware Version.
Ideally they should be same but if firmware finder is used to install different variant firmware, to get to a newer android version or for some other reason than these both miss match.

omair.anwer said:
Hi, i understand if information is not easy to find it of little value suggest me a name and i will change it.
"Manufacturer version" is your real device variant. (your need to download this to roll back with the roll back package if your are on android 7)
"version component version" is your current installed firmware Version.
Ideally they should be same but if firmware finder is used to install different variant firmware, to get to a newer android version or for some other reason than these both miss match.
Click to expand...
Click to collapse
Well, I am sorry but you again jumbled a lot of things just in some lines which didn't help me.
For your thread i would suggest the name "Honor 6x L21 downgrading/going back to B130 or B131 or B120" whatever file version you used to go back to 6.0.1.
As i have said before, i am have an Honor 6x BLN-L21C185 which is now on B131 stage of update but i want to upgrade to B342, while Phonenix1024 on this https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 thread suggested me to role back to B130 and then update to B342 via Firmware finder. What is your suggestion and what is your experience BTW.
I am sorry again if i was a little out spoken!
---------- Post added at 11:38 AM ---------- Previous post was at 11:28 AM ----------
omair.anwer said:
Link. It's only drive so can only keep it for about a month. By then I hope more people have uploaded it else where.
https://drive.google.com/file/d/0B_aM97XRoZYwSFpNeUstb2ZyaFE/view?usp=drivesdk
Click to expand...
Click to collapse
what is that file @omair.anwer , is it an upgrade or a downgrade, please name it! I mean you should write its name and version above the link, Thanks.
---------- Post added at 11:44 AM ---------- Previous post was at 11:38 AM ----------
Tangra said:
My phone was on BLN-L21C185B131. I installed firmware finder on my PC and downloaded BLN-L21C185B342 from there. From update.zip extracted update.app and installed using dload method. At the end of the update the message was something like "update failed". Now "System update" is missing in settings, factory reset is not working properly (it resets the phone but there is a message during the reset that Factory reset failed) and the build number is "NRD90M test-keys".
Please advice how I can fix it. Tnx
Click to expand...
Click to collapse
@Tangra , It has been suggested by some guys on this thread https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 , that we should go back to B130 and do not update to B131 but install firmware finder and directly upgrade to B342. So it was your bad luck that you are facing this but as Omair said you can flash his file or just download the B130 for your device model and follow the dload instructions to give a new life to your device. God bless you.

talvigi said:
Well, I am sorry but you again jumbled a lot of things just in some lines which didn't help me.
For your thread i would suggest the name "Honor 6x L21 downgrading/going back to B130 or B131 or B120" whatever file version you used to go back to 6.0.1.
As i have said before, i am have an Honor 6x BLN-L21C185 which is now on B131 stage of update but i want to upgrade to B342, while Phonenix1024 on this https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 thread suggested me to role back to B130 and then update to B342 via Firmware finder. What is your suggestion and what is your experience BTW.
I am sorry again if i was a little out spoken!
---------- Post added at 11:38 AM ---------- Previous post was at 11:28 AM ----------
what is that file @omair.anwer , is it an upgrade or a downgrade, please name it! I mean you write its name and version above the link, Thanks.
Click to expand...
Click to collapse
Well your question is more correct now.. So here is the simple answer.
No need to go back to 130 ...I also upgraded from 131. See my first post and update using firmware finder but using the method send to updater see the setting of firmware finder as you will need to do some proxy setting.
For the second file question as I explained in a reply to another member its a second part flash file to upgrade to android 7. Only if you upgraded using dload method.
The file is for bln-l21c185.

talvigi said:
Well, I am sorry but you again jumbled a lot of things just in some lines which didn't help me.
For your thread i would suggest the name "Honor 6x L21 downgrading/going back to B130 or B131 or B120" whatever file version you used to go back to 6.0.1.
As i have said before, i am have an Honor 6x BLN-L21C185 which is now on B131 stage of update but i want to upgrade to B342, while Phonenix1024 on this https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 thread suggested me to role back to B130 and then update to B342 via Firmware finder. What is your suggestion and what is your experience BTW.
I am sorry again if i was a little out spoken!
---------- Post added at 11:38 AM ---------- Previous post was at 11:28 AM ----------
what is that file @omair.anwer , is it an upgrade or a downgrade, please name it! I mean you write its name and version above the link, Thanks.
---------- Post added at 11:44 AM ---------- Previous post was at 11:38 AM ----------
@Tangra , It has been suggested by some guys on this thread https://forum.xda-developers.com/showpost.php?p=71578919&postcount=134 , that we should go back to B130 and do not update to B131 but install firmware finder and directly upgrade to B342. So it was your bad luck that you are facing this but as Omair said you can flash his file or just download the B130 for your device model and follow the dload instructions to give a new life to your device. God bless you.
Click to expand...
Click to collapse
@talvigi its a second part flash file you need to flash in order to get full functionality on android 7. This file is only needed if android 7 update is made using dload. This will also give your correct version in about and updater app. If update is made using firmware finder sent to updater method than this file is automatically downloaded and flashed in updating process. I got this file from the updater folder.

omair.anwer said:
Well your question is more correct now.. So here is the simple answer.
The file is for bln-l21c185.
Click to expand...
Click to collapse
Oh, no yaar, @Omair.anwar I have already formated my device this morning, because it was download the full update file send by firmware finder to my updater.
But i am still on B131, so according to you i should directly upgrade to B342 and i shouldn't go back to B130. BUT you said you had problems in B342 like no update options etc, may be this was just because you upgraded from B131?
@Omair.anwar if you live near by me in Pak please answer me that in the firmware finder should i choose the FullOTA-MF-PV size 2.352GB? my number is zero three two double zero two six one double six zero. Thanks

talvigi said:
Oh, no yaar, @Omair.anwar I have already formated my device this morning, because it was download the full update file send by firmware finder to my updater.
But i am still on B131, so according to you i should directly upgrade to B342 and i shouldn't go back to B130. BUT you said you had problems in B342 like no update options etc, may be this was just because you upgraded from B131?
Click to expand...
Click to collapse
I am not sure.. it should work fine if you Will use firmware finder with "installation via system update" and "view OTA updates" in setting.
If you want make sure, then after updater had downloaded 100% go to internal storage there will be a folder named something like OUC and see in its sub folders there should be two files one named update.zip and another named like "update data full".
I had the problem because I flashed different version firmware.

omair.anwer said:
I am not sure.. it should work fine if you Will use firmware finder with "installation via system update" and "view OTA updates" in setting.
If you want make sure, then after updater had downloaded 100% go to internal storage there will be a folder named something like OUC and see in its sub folders there should be two files one named update.zip and another named like "update data full".
I had the problem because I flashed different version firmware.
Click to expand...
Click to collapse
@omair.anwar if you live near by me in Pak please answer me that in the firmware finder should i choose the FullOTA-MF-PV size 2.352GB? Thanks

talvigi said:
@omair.anwar if you live near by me in Pak please answer me that in the firmware finder should i choose the FullOTA-MF-PV size 2.352GB? my number is zero three two double zero two six one double six zero. Thanks
Click to expand...
Click to collapse
Exactly that is very imp. Full OTA.

omair.anwer said:
Exactly that is very imp. Full OTA.
Click to expand...
Click to collapse
Thanks man, thanks a lot.
I will inform you guys, what happen to me and my lovely Honor 6xxxxxxx

Hi ! i have one question
After RollBack package flashed can i flash directly BLN-L21C432B130 or i flash the BLN-L24 Before ?????
I have my answer i can't flash directly my french firmware ...
It's the brothel to return to Android 6.0 compared to nexus or samsung devices XD i like challenge
Rollback Package For BLN-L21 ?????? : http://www.hihonor.com/fr/support/software-list/index.html (no tested because i have flashed the rollback package of BLN-L24 .... too late for me )

omair.anwer said:
Well your question is more correct now.. So here is the simple answer.
No need to go back to 130 ...I also upgraded from 131. See my first post and update using firmware finder but using the method send to updater see the setting of firmware finder as you will need to do some proxy setting.
For the second file question as I explained in a reply to another member its a second part flash file to upgrade to android 7. Only if you upgraded using dload method.
The file is for bln-l21c185.
Click to expand...
Click to collapse
Thank you for the link. I unzipped "update_data_full_BLN-L21_hw_meafnaf.zip" and dropped the content in dload folder on SD card. Flashed from Engineering mode menu and everything on the phone works correctly now.
I was trying to locate this file "update_data_full_BLN-L21_hw_meafnaf.zip" by myself with no success. i'm curious how did you find it and is there a link for this file somewhere on hicloud servers. I see that for EU version off the phone this file is available for direct download from there.
Anyways, you did amazing job and your post will help many people I guess. Thank you!
P.S. I noticed after I posted my remarks that you've got "update_data_full_BLN-L21_hw_meafnaf.zip" from your Updater App folder - great job and hopefully somebody will find the link for direct download from hicloud servers

Renaf2 said:
Hi ! i have one question
After RollBack package flashed can i flash directly BLN-L21C432B130 or i flash the BLN-L24 Before ?????
I have my answer i can't flash directly my french firmware ...
It's the brothel to return to Android 6.0 compared to nexus or samsung devices XD i like challenge
Rollback Package For BLN-L21 ?????? : http://www.hihonor.com/fr/support/software-list/index.html (no tested because i have flashed the rollback package of BLN-L24 .... too late for me )
Click to expand...
Click to collapse
Hi if you flashed Bln-l24 roll back and it worked than you can still flash bln-l24 android 6 package and after that use the firmware finder with correct settings to get back to bln-l21.
See pic attached for settings and read my very first post too.
I hope I understood your concern well.

omair.anwer said:
Hi if you flashed Bln-l24 roll back and it worked than you can still flash bln-l24 android 6 package and after that use the firmware finder with correct settings to get back to bln-l21.
See pic attached for settings and read my very first post too.
I hope I understood your concern well.
Click to expand...
Click to collapse
Thank you very much but finally i resolved alone my problem
I'm now with my Stock Rom Debloated My Bank app convert to system app directly unrooted ... i'm ready when Nougat Final update is out
Can i relock my bootloader with this command prompt ? : fastboot oem relock "my 16 digit code" ???????? No can't relock bootloader with command prompt but if you reflash stock rom with update method you relock bootloader resolved

Old firmware?

Hi all. Today I purchased an Honor 6x. I am in the UK. The phone has been on all day and I have been tapping the update button like crazy. It seems that I am stuck on EMUI 4.1.3 and Android Marshmallow. Should there be a Nougat update in the UK for this phone? Thanks in advance

muppet2008 said:
Hi all. Today I purchased an Honor 6x. I am in the UK. The phone has been on all day and I have been tapping the update button like crazy. It seems that I am stuck on EMUI 4.1.3 and Android Marshmallow. Should there be a Nougat update in the UK for this phone? Thanks in advance
Click to expand...
Click to collapse
What's your build model?
Sent from my Honor 8 Pro using XDA Labs

Hi Adrian, I. Think this is it.
BLN-L21C432B151

muppet2008 said:
Hi Adrian, I. Think this is it.
BLN-L21C432B151
Click to expand...
Click to collapse
Have a look HERE, latest firmware is B366.
Sent from my Honor 8 Pro using XDA Labs

Ah thanks both. I've just had a look at that site and firmware finder. As there doesn't seem to be an OTA update heading my way I might give firmware finder a bash. Many thanks.

ahsan.mehar1 said:
U should try to upgrade via firmware finder app on play store its work 100% i also upgrade my 6x with this app
Click to expand...
Click to collapse
No, it doesn't work at 100%, often users detect problems of various types after using FF here on XDA, this because it can download even packages that not always match your phone variant...
---------- Post added at 06:28 PM ---------- Previous post was at 06:26 PM ----------
muppet2008 said:
Ah thanks both. I've just had a look at that site and firmware finder. As there doesn't seem to be an OTA update heading my way I might give firmware finder a bash. Many thanks.
Click to expand...
Click to collapse
Updates should be already came out if I'm not wrong, try to force the update by clicking on system uodaye -> 3 dots on the upper right corner -> down latest update. If nothing is found, try to write to Huawei and ask about the most recent update for your build

I have sent Huawei an email requesting information with regards to an update. Obviously I'll get no reply being the weekend so I have been sat here looking at firmware finder. So close to using it. From what I understand it won't void the warranty of the phone if I update using firmware finder. What if the update doesn't work can I revert back to the original version. What if the update bricks the phone? Is that easy to fix?
TIA

ahsan.mehar1 said:
Bro its work 100% via FF application by proxy not manually. With FF application its detect ur build number and show u a valid roms
Click to expand...
Click to collapse
I saw too much times users having problem after that, i can't trust it yet man! (this is only MY opinion, to be clear)
muppet2008 said:
I have sent Huawei an email requesting information with regards to an update. Obviously I'll get no reply being the weekend so I have been sat here looking at firmware finder. So close to using it. From what I understand it won't void the warranty of the phone if I update using firmware finder. What if the update doesn't work can I revert back to the original version. What if the update bricks the phone? Is that easy to fix?
TIA
Click to expand...
Click to collapse
The rollback packages are available only for a limited amount of models at the moment (and i think forever, if Huawei wouldn't upload other packages as they've decided to do) so it could be a pain without a proper TWRP backup. For unbricking, there are some methods for doing that and it could be easy like it couldn't be, it just depends by the problem that could occur.

Ah thanks RedSkull. I might try and kerb my eagerness and see if I get a response from Huawei. This week's a bit busy so probably not the time to try anything risky.

i m not able to install stock recovery i m on twrp AND THERE IS NO OS IN MY PHONE
vendor and product partitions are completely empty
not able to boot at all not installing any rom zip as saying not able to mount vendor
how to flash vendor and product i tried with fastboot but it says remote command not allowed and tried installing stock recoery by fastboot and it installs successfully but when i boot recovery there is only twrp everytime
without stock i cant use dload method and stock is not installing and custom roms are also not installing

Hey guys.
after a download with firmware finder,I found this problem: ????
failed to authenticate installation passage.This package is unauthorized and will be deleted.Please download and install an authorized installation package.
Help me.my build number is b361 and I want to update to b380

No OTA on stock

So I'm finally ready to say goodbye to my H8 but after relocking the bootloader ,rolling back and dloading B360 for the L09 i am unable to get OTAs.
I thought i could simply flash another version from FF but all that did is allow me to update through HiSuite.
Plus it (HiSuite) always says I'm on a developer version.
Could anyone guide me to a proper L09 stock version that i can dload or anything else that would help?
I think I've had the problem before but I can't remember what I did to fix it other than maybe downgrading to MM.
But dloading the same file after that seems kind of pointless.

SharxX8 said:
So I'm finally ready to say goodbye to my H8 but after relocking the bootloader ,rolling back and dloading B360 for the L09 i am unable to get OTAs.
I thought i could simply flash another version from FF but all that did is allow me to update through HiSuite.
Plus it (HiSuite) always says I'm on a developer version.
Could anyone guide me to a proper L09 stock version that i can dload or anything else that would help?
I think I've had the problem before but I can't remember what I did to fix it other than maybe downgrading to MM.
But dloading the same file after that seems kind of pointless.
Click to expand...
Click to collapse
I Had That Problem When I Rebranded.
All You Have To Do Is Use " Get An Update Through DNS" In Firmware Finder And Now I Had The Latest Version.
And Then While I Did That I Suddenly Started To Get Updates Without Firmware Finder
Oh And Also How To Get To Stock:
https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445

RealFireBlaze20 said:
I Had That Problem When I Rebranded.
All You Have To Do Is Use " Get An Update Through DNS" In Firmware Finder And Now I Had The Latest Version.
And Then While I Did That I Suddenly Started To Get Updates Without Firmware Finder
Oh And Also How To Get To Stock:
https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445
Click to expand...
Click to collapse
Well the issue is i did both of those and neither allowed me to get official OTAs.
I want to sell the device as long as its worth something so this is rather important for that
But the rollback files i used are quite old so maybe its a wrong version or something.
But I did update through the FF proxy, same thing.no luck
Edit: i did the proxy update so maybe thats the culprit, but isnt it just downloading the same version as the dns one?

SharxX8 said:
Well the issue is i did both of those and neither allowed me to get official OTAs.
I want to sell the device as long as its worth something so this is rather important for that
But the rollback files i used are quite old so maybe its a wrong version or something.
But I did update through the FF proxy, same thing.no luck
Edit: i did the proxy update so maybe thats the culprit, but isnt it just downloading the same version as the dns one?
Click to expand...
Click to collapse
Yeah

Rommco05 said:
Which fw you were trying to install. I do not understand how you can not install eg B380 because it is point version and approved install over dload. What about unlock bootloader and flash fw over twrp?
Click to expand...
Click to collapse
I can install it but not over official OTA.
Also i saw i asked the same question on your other thread and apparently downgrading to MM fixed it last time.
So sorry,i forget things easy
I will try that

Tried it again with the official Rollback package and MM firmware.
Got the OTA to B360 and now, no OTA again...
Anyone have any suggestions?

Help with firmware finder

Hi I have the mate 9 l09 UK version running the 363 software version,on firmware finder I could install latest 368 software however it's being listed for the l09b Australian version would this mess my phone up?cheers.

cnutt1 said:
Hi I have the mate 9 l09 UK version running the 363 software version,on firmware finder I could install latest 368 software however it's being listed for the l09b Australian version would this mess my phone up?cheers.
Click to expand...
Click to collapse
Start the app vpn and search again in the settings to update your system. This wasy solution to update my system
Gesendet von meinem MHA-L29 mit Tapatalk

ryderslider said:
Start the app vpn and search again in the settings to update your system. This wasy solution to update my system
Gesendet von meinem MHA-L29 mit Tapatalk
Click to expand...
Click to collapse
Hi thanks for your reply ,yeah that's how I did it and on the software update screen it's coming up as l09b

Have you checked the firmware access? If the firmware approved, you can update your system.
Gesendet von meinem MHA-L29 mit Tapatalk

ryderslider said:
Have you checked the firmware access? If the firmware approved, you can update your system.
Gesendet von meinem MHA-L29 mit Tapatalk
Click to expand...
Click to collapse
Yeah the firmware is approved I was just worried because I have l09 and in the firmware update it's showing l09b another member did the update though an said it's all fine.im going to update when I get home cheers for replying.

I have this same issue. Firmware finder shows my device is approved but when I run the update VPN and check for the updates, the phone sees the update as L09 and not L29. As my phone is an L29 I want to keep the right firmware on it so I can retain all the functionality as it should be.
Sent from my MHA-L29 using Tapatalk

aindow said:
I have this same issue. Firmware finder shows my device is approved but when I run the update VPN and check for the updates, the phone sees the update as L09 and not L29. As my phone is an L29 I want to keep the right firmware on it so I can retain all the functionality as it should be.
Click to expand...
Click to collapse
Same here. And I also didnt want to go for that one update because I don't won't to mess with my phone yet. Now, when update 369 appeared in FF I tried update through VPN again and guess what? It offers me update to 369, correct for my version, even it's not yet approved!? (Screenshots)
And I don't even want to go for this one because whole thing is just too messy and not right... No update yet through system for you too?

Same here. L29, but it offers the version for L09B for me. Anything I could do so my phone would download the correct firmware? L29-version was approved. System update menu still only tries to download this L09B-version. I'm not using my phone as a dual-sim phone, but still would prefer to keep that feature in future too.

-ErrorFile- said:
Same here. L29, but it offers the version for L09B for me. Anything I could do so my phone would download the correct firmware? L29-version was approved. System update menu still only tries to download this L09B-version. I'm not using my phone as a dual-sim phone, but still would prefer to keep that feature in future too.
Click to expand...
Click to collapse
I don't think there is much to be done through FF towards that. I tried in FF thread and in Telegram group, there is also ppl with same problem but no help. Alternative is unlocking bootloader and flashing new version.
Btw my 368 update just arrived through system and is downloading in background Try refresh yourself, maybe it's there for you (and others )

kobredabre said:
I don't think there is much to be done through FF towards that. I tried in FF thread and in Telegram group, there is also ppl with same problem but no help. Alternative is unlocking bootloader and flashing new version.
Btw my 368 update just arrived through system and is downloading in background Try refresh yourself, maybe it's there for you (and others )
Click to expand...
Click to collapse
I have to ask - how can I refresh the system update menu, as it only tries to make me download this wrong version update? I can't make it find any new updates, but it forces me into downloading this one. Do I just wait long enough until the correct update OTA hits my phone, or what? I'd like to get this thing "deleted" from the menu, and not download it for nothing.
EDIT: And yeah - the top-right menu has the "Download the latest full package" (or whatever the real English-translation is, my system is in Finnish) option so it can't be clicked.
EDIT 2: Problem solved. I deleted all the data the EMUI update app had, that cleared out this wrong update and now I can refresh the menu to search for updates again. Whew.

B369 brik my mate9

-ErrorFile- said:
I have to ask - how can I refresh the system update menu, as it only tries to make me download this wrong version update? I can't make it find any new updates, but it forces me into downloading this one. Do I just wait long enough until the correct update OTA hits my phone, or what? I'd like to get this thing "deleted" from the menu, and not download it for nothing.
EDIT: And yeah - the top-right menu has the "Download the latest full package" (or whatever the real English-translation is, my system is in Finnish) option so it can't be clicked.
EDIT 2: Problem solved. I deleted all the data the EMUI update app had, that cleared out this wrong update and now I can refresh the menu to search for updates again. Whew.
Click to expand...
Click to collapse
Yeah, that's the right way. I had the same problem and posted solution here:
https://forum.xda-developers.com/mate-10/how-to/firmware-finder-downloaded-wrong-t3778000
and here:
https://forum.xda-developers.com/mate-9/how-to/mate-9-c567-t3705915/page43
so everyone with same problem can help themselves.
And good options is to disable automatic system update in developer options, if you already play with FF and similar stuff, so the wrong firmwares won't even start to download. Then you just disable VPN (or DNS), check aganin for update in EMUI update app and wrong update is gone
---------- Post added at 08:02 AM ---------- Previous post was at 07:54 AM ----------
aureliomilitao said:
B369 brik my mate9
Click to expand...
Click to collapse
That's because that one is not even approved yet but, if you try to update it through FF (VPN or DNS), EMUI update app (for whatever reason) recognized it. That's why I even didn't want to go with that one but I didn't excepted brik. Maybe not correct firmware message, or something like that

kobredabre said:
Yeah, that's the right way. I had the same problem and posted solution here:
https://forum.xda-developers.com/mate-10/how-to/firmware-finder-downloaded-wrong-t3778000
and here:
https://forum.xda-developers.com/mate-9/how-to/mate-9-c567-t3705915/page43
so everyone with same problem can help themselves.
And good options is to disable automatic system update in developer options, if you already play with FF and similar stuff, so the wrong firmwares won't even start to download. Then you just disable VPN (or DNS), check aganin for update in EMUI update app and wrong update is gone
---------- Post added at 08:02 AM ---------- Previous post was at 07:54 AM ----------
That's because that one is not even approved yet but, if you try to update it through FF (VPN or DNS), EMUI update app (for whatever reason) recognized it. That's why I even didn't want to go with that one but I didn't excepted brik. Not correct firmware message, or something like that
Click to expand...
Click to collapse
but I always update by the HWOTA8 method in the last 10 updates never occurred BRIK only this B369. Even unauthorized I always do for HWOTA8 and never gave a problem, just with this ROM B369

I think Huawei may know about this issue as all 369 versions no longer show as available for installation.
Sent from my MHA-L29 using Tapatalk

Stuck on EMUI 8.0.0.379 - No new updates

Please I need help, last week I installed EMUI 9.0.1.158 on my MHA-L29 but I wasn't so impressed so I rolled back to 8.0.0.379 (by using HiSuite) and now I changed my mind but can't get to update anymore. No updates show up on System Update, HiSuite or HiCare. I deleted data & cache from System Update, even did a factory reset but nothing changed. How is it possible? I hope you guys can help me. Thank you.

I hv the same issue ,when I received the update notifications, I didn't update immediately and after few days it gone and I never get any notifications .please help.

mauromazzo said:
Please I need help, last week I installed EMUI 9.0.1.158 on my MHA-L29 but I wasn't so impressed so I rolled back to 8.0.0.379 (by using HiSuite) and now I changed my mind but can't get to update anymore. No updates show up on System Update, HiSuite or HiCare. I deleted data & cache from System Update, even did a factory reset but nothing changed. How is it possible? I hope you guys can help me. Thank you.
Click to expand...
Click to collapse
your make downgrade Oreo and now need Pie again??? why

aureliomilitao said:
your make downgrade Oreo and now need Pie again??? why
Click to expand...
Click to collapse
I got delayed push notifications but then I realized it was my routers fault, so I want to install it again.
Firmware Finder says 9.0.1.158(C432) is not approved for installation but I had installed it before... This is weird

Follow this method, it's working
https://forum.xda-developers.com/showpost.php?p=78850439&postcount=1334
---------- Post added at 12:35 AM ---------- Previous post was at 12:34 AM ----------
Follow this method, it's working
https://forum.xda-developers.com/showpost.php?p=78850439&postcount=1334

thanks
Necrodaemon said:
Follow this method, it's working
https://forum.xda-developers.com/showpost.php?p=78850439&postcount=1334
---------- Post added at 12:35 AM ---------- Previous post was at 12:34 AM ----------
Follow this method, it's working
https://forum.xda-developers.com/showpost.php?p=78850439&postcount=1334
Click to expand...
Click to collapse
ıts work for me

same story as mine. no more update and noti about new software update.

lawong said:
same story as mine. no more update and noti about new software update.
Click to expand...
Click to collapse
9.0.1.158 is no longer approved (at least for me). I guess we have to wait until 9.0.1.179 full OTA comes out...

same story, cannot upgrade to A9

will try with FF and modded hisuite, cause I was successful with Honor 10 today upgrading to FW 222. It works, but sometimes says no internet connection. It requires many tries.

Already have new firmware android pie dun give up guys.

Ing.King said:
will try with FF and modded hisuite, cause I was successful with Honor 10 today upgrading to FW 222. It works, but sometimes says no internet connection. It requires many tries.
Click to expand...
Click to collapse
luck2ang said:
Already have new firmware android pie dun give up guys.
Click to expand...
Click to collapse
Hi...the part with moving files is unclear, or was it translated from russian by google? I have already HiSuite latest version installed , so should I uninstall it and install the one dowloaded (older version) ? thanks

luck2ang said:
Already have new firmware android pie dun give up guys.
Click to expand...
Click to collapse
You receive the OTA?

I'm stuck on 8.0.0.376, do I need to upgrade via the spoof method to "latest" 8.0.0.xxx THEN try a full/partial 9.0 OTA?
Ive tried partial OTAs from 9.0 that are approved = hisuite says update failed.
Ive tried 1 full OTA from 9.0 that is approved = hisuite downloads passes all ok, phone reboots = verification failed (I assume phone is NOT connecting to internet on eRecovery phase right? but you never know. Since I'm only spoofing on windows not on the router).
Norgesjam said:
Hi...the part with moving files is unclear, or was it translated from russian by google? I have already HiSuite latest version installed , so should I uninstall it and install the one dowloaded (older version) ? thanks
Click to expand...
Click to collapse
Yes uninstall old one (backups if any won't be deleted) and reinstall with instructions.

yes but i revert back. many bugs.after i revert all become normal still can update dun worry

Same here, i updated to 9 then hated the bugs so used hisuite to downgrade, then i got s10e, since the mate 9 is my secondary phone now, i need the butter like smoothness of emui 9
Sent from my MHA-L29 using Tapatalk

New regions for 9.0 on the Mate 9 has been released at the start of June 3rd. In the next week, I guess we'll see who gets it

9.0.1.191(C432) has been approved for installation on FF, so the update should arrive during the coming days/weeks.

9.0.1.191 (C432) is approved for installation, I tried install via the firmware finder eRecovery method but the udpate stuck at downloading 0%
---------- Post added at 17:59 ---------- Previous post was at 17:23 ----------
It's quite strange that Middle East variant i.e. C185 has received the update since March and the Europe region is still waiting for the update. Whereas previously it was totally opposite.

Update: After wasting an hour and download the approved 9.0.1.191 via eRecovery from Firmware Finder, the package gave "Package Authentication Failed Error" on 99%.