Related
I've finally managed to find another copy of the stock Ascend P2 firmware [P2-6011V100R001C00B021]
Flashing is easy, just copy the dload folder to the root of your internal memory and use the system update app to apply a local update.
The ROM can be rooted using eRoot.
More tweaks and other mods for this rom will follow soon.
Downloads:
P2-6011V100R001C00B021
eroot v1.3.3
Thank you Angelbob! I can finally have the B021 update
Very cool I assume I can flash it even if I've removed some of the stock Apks from my current rom?
By the way there's a p2tools apk on the server- Whats it for?
Mine fails to update, after the system reboots in the Android recovery system.
Fails to mount E: /SDcard. Runs through the "checking module" stuff, and after Checking module Cust it writes Huawei SD card update fail..
and continues
cust copying files...
copy cust files successed!
and then the huge
FAIL.
I'm probably doing something wrong but what could it be?
Try a factory reset first
Sent from my C6603 using Tapatalk
How well does this ROM work?
EDIT: I also cannot get this ROM installed.
Could it be because I am already running BO25?
I tried factory resetting as you suggested to the other person, it made no difference.
Tried factory reset also, made no difference
Mine updated fine.
I thought this would remove the silly operator logo that comes up when i turn on my phone and remove all the apps installed by the operator, but it's all still there.
Is this just a 'kernel' update or am i missing something here?
Thanks.
Impossible for me to install the B021... Error in the recovery when flashing
I'm with B007...
HI
anyone had success in flashing this on P2 which locked to 3 UK network?
the same for me !!
The same : "Impossible for me to install the B021... Error in the recovery when flashing
I'm with B007... "
Can somebody please help me get down to BO21, I am stuck on the appalling BO25 and there is still no fix released!
same problem here. update fails in the check part. I have edited the buid.prop. can anyone send me the build.prop for the B021 version?
Mabe new update !!!
xixorro said:
same problem here. update fails in the check part. I have edited the buid.prop. can anyone send me the build.prop for the B021 version?
Click to expand...
Click to collapse
I worked the last 8 Hours on a update for the huawei p2.
in few minutes i will try it.
PlS Hope with me :angel:
davide_94 said:
I worked the last 8 Hours on a update for the huawei p2.
in few minutes i will try it.
PlS Hope with me :angel:
Click to expand...
Click to collapse
I extracted the build.prop file from a stock ROM someone sent me and was able to update. you made your own update. what will it do?
xixorro said:
I extracted the build.prop file from a stock ROM someone sent me and was able to update. you made your own update. what will it do?
Click to expand...
Click to collapse
the update zip is mixed with the huawei p6 omni rom based on 4.4.4.
but i get error during install the zip.
error status 6
_wolfpup said:
Can somebody please help me get down to BO21, I am stuck on the appalling BO25 and there is still no fix released!
Click to expand...
Click to collapse
You ought to try this method to downgrade your ROM.
1) your P2 must have root access;
2) find in the "default.prop" file (you'll find it in the "/" directory) and change "B025" to "B020" for example:
ro.confg.hw_bootversion=P2-6011V100R001C00B025...
3) find in the "build.prop" file and change all "B025" to "B020" for example:
ro.confg.hw_systemversion=P2-6011V100R001C00B025_SYSTEM
ro.build.display.id=P2-6011V100R001C00B025
ro.build.version.incremental=C00B025
ro.build.description=P2-6011-user 4.1.2 HuaweiP2-6011 C00B025 ota-rel-keys,
ro.build.fingerprint=Huawei/hwp2-6011:4.1.2/HuaweiP2/C00B025
ro.product.CustDVersion=B025 (here can be any other values, these are only for example).
Having changed all the above-mentioned values, you will be able to downgrade your B025 ROM to B021. Just remember, that a ROM version in the edited "default.prop" and "build.prop" must be lower than a ROM version which you want to downgrade to.
Good luck!
Android 4.4.2 Omni Rom successfully installed
l0l0l0 said:
still no custom rom for this device
Click to expand...
Click to collapse
History
At the first time i tried to build my own custom Rom Mixed with the Huawei P2 + Huawei P6. After installing my own rom my Huawei P2 system was death.
After i tryed a lot of hours to fix it but nothing helps.
All partitions were lost. I tryed to install the stock recovery and update the phone using Update.app. ( But didnt work)
i tryed really all things. but nothing works. Only one thing.
Step by Step Instruction:
Follow the instructions on your own risk
1- Download the B510 Update for the huawei P6 ""Download""
2- Download the Huawei Update extractor ""Download""
1. In Profiles Select Huawei P6
2. Choose the Update file that you have downloaded.
3. Mark
- system.img
- userdata.img
- cust.img
- boot.img
4. Right click on a market line and select "create flashable zip"
3- Download this Openrecovery ""Download""
4- Download ADB And Fastboot ""Download""
5- Extraxt the Adb/Fastboot zip file In a folder
6- Copy the recovery.img in the same folder
7- Open the folder and press "shift" + "right-click" on a free place in the folder select "Open command window here"
8- Make shure Usb Debuging is enabled and connect your phone with the PC
9- type "adb reboot bootloader"
10- type "fastboot flash recovery recovery.img"
11- type "fastboot reboot"
12- during startup press "power" + vulume-up + volume-down" at same time and wait for the recovery
13- Select "wipe" "swipe to factory reset"
14- Select "wipe" "format data"
15- Select "advanced" "adb sideload" "swipe to start sideload"
16- move youre flashable zip into the same folder (like recovery.img)
17- Open command window (Step 7-)
18- type "adb sideload "your-zip-name".zip
19- now the install beginn and you have the P6 Firmware installed (Dont try to reboot your Phone it dosnt work)
20- Download Omni Rom and Gapps ""Homade Rom Download"" ""Stable Omni Rom 4,4,2 Download"" ""Gapps Download""
21- Firs install the Homade Version (same like step 1
22- now install the Stable Omni Rom 4,4,2 (same like step 1
23- wipe cache and dalvik
24- install Gapps (same like step 1
25- wipe cache and dalvik
26- Congratulation You Have now a Huawei P2 Phone with The Huawei P6 Firmware And Omni Custom Rom 4.4.2
Follow the instructions on your own risk
Please Give me a feadback if it work.:good:
Say thanks If it work :good:
Knowed Issue:
Phonespeaker works only after plugin a headset and unplug.....
I'm going to try this now, thanks for posting this. If it works I'll owe you big time. :victory:
---------- Post added at 03:48 PM ---------- Previous post was at 02:54 PM ----------
Tried it and it says invalid file when trying to open the update.app file from the B510.zip
I extracted the B510 file and tried to open update.app
http://prntscr.com/49gglp
jdcrispe95 said:
I'm going to try this now, thanks for posting this. If it works I'll owe you big time. :victory:
---------- Post added at 03:48 PM ---------- Previous post was at 02:54 PM ----------
Tried it and it says invalid file when trying to open the update.app file from the B510.zip
I extracted the B510 file and tried to open update.app
http://prntscr.com/49gglp
Click to expand...
Click to collapse
go to original Post ==>
There is all things updated
For people, who flashed fRomFuture - NewWorld V2 on AL10 for getting rid of the chinese stuff, and want to get back to stock rom:
1. Stock Recovery is needed!
2. download the file
3. unzip it and copy update.app from the zip into your dload-folder on your sdcard
4. dial *#*#2846579#*#*
5. in the upcoming menu, choose 4 (Software Upgrade) and then SDCard Upgrade
6. device will reboot and start flashing
Download
Mirror
raider2k9 said:
For people, who flashed fRomFuture - NewWorld V2 on AL10 for getting rid of the chinese stuff, and want to get back to stock rom:
1. Stock Recovery is needed!
2. download the file
3. unzip it and copy dload file to sdcard
4. dial *#*#2846579#*#*
5. in the upcoming menu, choose 4 (Software Upgrade) and then SDCard Upgrade
6. device will reboot and start flashing
Download
Mirror
Click to expand...
Click to collapse
Thanks, does it matter that I re-branded my phone using Paul's L09 update?
Milamber said:
Thanks, does it matter that I re-branded my phone using Paul's L09 update?
Click to expand...
Click to collapse
you can only try, but I think it should work, cause it´s an real AL10 rom for the real AL10.. or did you change something in the oeminfo so that it is recognized as L09?
am following nthe instructions as displayed in the OP but upon unzipping the file there is no 'dload' file available...any help please
1. Stock Recovery is needed!
2. download the file
3. unzip it and copy dload file to sdcard
4. dial *#*#2846579#*#*
5. in the upcoming menu, choose 4 (Software Upgrade) and then SDCard Upgrade
6. device will reboot and start flashing
have also followed these instructions which advise to not unzip...?
http://www.huaweiblog.de/downloads/huawei-p9-firmware-update-b166-ota/
mrsim said:
am following nthe instructions as displayed in the OP but upon unzipping the file there is no 'dload' file available...any help please
1. Stock Recovery is needed!
2. download the file
3. unzip it and copy dload file to sdcard
4. dial *#*#2846579#*#*
5. in the upcoming menu, choose 4 (Software Upgrade) and then SDCard Upgrade
6. device will reboot and start flashing
have also followed these instructions which advise to not unzip...?
http://www.huaweiblog.de/downloads/huawei-p9-firmware-update-b166-ota/
Click to expand...
Click to collapse
Unzip it and put the update.app file in dload folder on sd card.
Thanks, been looking for this...
Sent from my NEXT using Tapatalk
Mostar088 said:
Unzip it and put the update.app file in dload folder on sd card.
Click to expand...
Click to collapse
and then after i do this what's next please...do i leave the .zip file in the same dload folder on my ex sd card and then follow the instructions as stated
mrsim said:
and then after i do this what's next please...do i leave the .zip file in the same dload folder on my ex sd card and then follow the instructions as stated
Click to expand...
Click to collapse
No, just the file update.app then dial *#*#2846579#*#*
in the upcoming menu, choose 4 (Software Upgrade) and then SDCard Upgrade.
Mostar088 said:
No, just the file update.app then dial *#*#2846579#*#*
in the upcoming menu, choose 4 (Software Upgrade) and then SDCard Upgrade.
Click to expand...
Click to collapse
I updated the instructions
can you believe after all that the OTA came through today in the UK...LOL...but thanks again for posting and helping...much appreciated by all i am sure....
EVA-AL10 to EVA-L29
Hey guys,
I am really sorry for the dumb question... I want to get rid of all chinese stuff in my phone (EVA-AL10, currently my device is on C00B183).
I already downloaded the SRK tool and have the EVA-L29C636B136 version downloaded from stock ROM thread.
Which oeminfo may I flash in my phone with the tool?
After flash EVA-L29C636B136 I will receive the last update by OTA or need to download the last version in stock rom thread and do it manually?
Can I up this ROM for EVA-L19 ?? thanks
In twrp i've made a mistake: i've done an advanced format (wipe), so now i cannot boot the phone anymore (the phone is stuck at the cyan honor logo)
I can enter in twrp.
What can i do?
Please help!
Thanks!
Flash stock recovery and download last firmware in sd / dload folder then force update (pow+volume rockers both)
VenuGopalu said:
Flash stock recovery and download last firmware in sd / dload folder then force update (pow+volume rockers both)
Click to expand...
Click to collapse
It is mandatory to have an external sd card? Or can i put the dload folder in internal storage?
Thanks
mandelbort said:
It is mandatory to have an external sd card? Or can i put the dload folder in internal storage?
Thanks
Click to expand...
Click to collapse
Dload always with external sd card
Do not try to use it with the internal
Search for the rollback package
Just simply download your device last firmware and extract the following with Huawei update extrator
1.boot .img
2.cust.img
3.recovery.img
4.system.img
5.userdata.img
Then boot your device into fastboot ,open adb command then flash
1.fastboot flash boot boot.img
2.fastboot flash cust cust.img
3.fastboot flash recovery recovery.img
4.fastboot flash system system.img
5.fastboot flash userdata userdata.img
Then 6. fastboot reboot
your device will go on reboot .
That's it back to normal
YES
mandelbort said:
It is mandatory to have an external sd card? Or can i put the dload folder in internal storage?
Thanks
Click to expand...
Click to collapse
yes it is
VenuGopalu said:
Just simply download your device last firmware and extract the following with Huawei update extrator
1.boot .img
2.cust.img
3.recovery.img
4.system.img
5.userdata.img
That's it back to normal
Click to expand...
Click to collapse
Thank you; and others img's are useless?
So, i managed to flash nougat by this links
http://www.stechguide.com/honor-8-b360-nougat-update/
1. Update.zip
2. Update_data_full_hw_eu.zip
putting the various files in the dload folder.
The first update.zip succedeed; but rebooting the system and making first configuration, i see that the os lacks on many apps (no keyboard!).
Trying to update with Update_data_full_hw_eu.zip i get incompatible firmware.
So my idea was to flash the original stock rom (android 6); i downloaded it on
http://www.stechguide.com/honor-8-b360-nougat-update/
and put everything in the dload folder.
But this time erecovery says to me "software installation failed, incompatibility with current version"
Any clue?
Thanks again
Follow the given thread video tutorial also given
mandelbort said:
So, i managed to flash nougat by this links
http://www.stechguide.com/honor-8-b360-nougat-update/
1. Update.zip
2. Update_data_full_hw_eu.zip
putting the various files in the dload folder.
The first update.zip succedeed; but rebooting the system and making first configuration, i see that the os lacks on many apps (no keyboard!).
Trying to update with Update_data_full_hw_eu.zip i get incompatible firmware.
So my idea was to flash the original stock rom (android 6); i downloaded it on
http://www.stechguide.com/honor-8-b360-nougat-update/
and put everything in the dload folder.
But this time erecovery says to me "software installation failed, incompatibility with current version"
Any clue?
Thanks again
Click to expand...
Click to collapse
just simply follow my instructions to get normal stock rom
https://forum.xda-developers.com/honor-8/how-to/video-guide-honor-8-unbricking-relock-t3554579
YOUTUBE TUTORIAL :::: https://youtu.be/OMKDnBqbi3U
---
Hi @deluxe^ check for OTA updates in your device by clicking check for updates If any available proceed through OTA if not available try manual update by following the procedure
1.First download the ROMS full packages form here for your region.
2.Extract the zip file and make a folder names as dload in root directory of sd card and copy the update.app into that folder.
3.Dail *#*#2846579#*#* you will enter into ProjectMenu then click Software Update>>SDCard Update
4.Confirm the prompt and your device will reboot to update.
IMP:BACKUP BACKUP BACKUP all your data before proceeding the above procedure is safe to proceed but proceed with caution.
Select correct ROM version for your region.
Rooting Huawei Mediapad M5 Lite ( All Editions ).
Requirements:
1. Unlocked Huawei Mediapad M5 lite ( All Editions ).
2. Minimal ADB Tools.
3. Magisk Manager latest from magisk manager website.
4. Huawei Firmware Finder ( Download from Playstore ).
4. Original Firmware Update.zip of current device you are running (Check in your device from Huawei Firmware Finder app).
5. Zarchiver ( Download from Playstore ).
6. Ramdisk.img file ( Extracted from Update.zip ).
Procedure:
1. Download Zarchiver app in playstore and download the current stock rom update.zip ( check your version in update settings) and open the update.zip file in Zarchiver app in your tab and extract the RAMDISK.img to any folder in your tablet.
2. Open Magisk Manager app in you tab and click on 1st "install" option then "select and patch a file" then browse your RAMDISK.img you copied to your internal memory. It will patch the RAMDISK.img and store it in downloads folder in your tab.
3. Download the minimal ADB tools from any website and install them your pc.
4. Copy the patched-ramdisk.img file to adb folder in PC and open the command prompt from the adb folder .
2. Enable USB debugging setting in the tablet and connect the tablet to the pc. After connecting open command prompt in the adb folder you have installed and type
Code:
adb devices
. You must see a device in the output. ( If not properly enable your usb debugging settings).
3. After that type
Code:
adb reboot bootloader
. Your device will boot into the fastboot mode and you will see BOOTLOADER UNLOCKED on the tab screen.
4. Now type
Code:
fastboot flash ramdisk patched-ramdisk.img
( patched-ramdisk file name may differ).
5. Your device is Successfully Rooted.
You need unlocked bootloader for this
Yes
lapora said:
You need unlocked bootloader for this
Click to expand...
Click to collapse
I have provided complete guide to unlock bootloader
i sold it and bought a samsung galaxy tab s5e no more huawei **** i spend hours to make the twrp and magisk to work with out errors but at least i didn't pay a third party unlock service because huawei decided to lock everything.
lapora said:
i sold it and bought a samsung galaxy tab s5e no more huawei **** i spend hours to make the twrp and magisk to work with out errors but at least i didn't pay a third party unlock service because huawei decided to lock everything.
Click to expand...
Click to collapse
You tried to make twrp? Magisk works man.
hi , i can't find IMG file into update.zip ? why
ouawai said:
hi , i can't find IMG file into update.zip ? why
Click to expand...
Click to collapse
It´s inside the file "update.app". You need a special tool to extract.
Please take a look to this thread:
https://forum.xda-developers.com/mediapad-m5/how-to/root-root-guide-huawei-mediapad-m5-t3786157
From the M5 guide:
"Download the full stock rom (update.zip) from the site I linked in the credits. Extract UPDATE.APP file from the zip. Then use HuaweiUpdateExtractor to extract ramdisk.img specific to your device"
I might be dumb AF but these guides are incomplete :/
Can anybody please share the Profiles.xml containing the images for the M5 Lite?
So far I used the Firmware Finder for downloading the latest rom which contains the UPDATE.APP and also downloaded the HuaweiUpdateExtractor but without the right profile it won't open file.
EDIT: currently following the main guide about extracting the ramdisk image: https://www.theandroidsoul.com/extract-huawei-firmware-update-app/
EDIT-2: guide (the one of my link above, not the guide of this thread) followed and finally rooted! Man, what a journey.
https://topjohnwu.github.io/Magisk/install.html
Rooting Huawei Mediapad M5 Lite ( All Editions )
Requirements on drumiec edition:
1. Unlocked Huawei Mediapad M5 lite.
2. Minimal ADB Tools [also added to post]
3. WinRar or other extraction tool
4. Magisk Manager apk file from original XDA topic.
5. Huawei Update Extractor [UPDATED: v0.9.9.5] [also added to post]
6. Original Firmware update.zip of current device you are running from https://pro-teammt.ru/en/online-firmware-database/
I used website that actually belong to Huawei Firmware Finder aplication TeamMT, so will give you same result with searching database (look at screen1.jpg - attached to post)
When you will find your firmware version click on filelist and pick the first link, usually is the largest file from all 3 links (like 1.8GB for example).
7. Download update.zip and extract UPDATE.APP from inside using WinRAR or so.
8. Open Huawei Update Extractor and open with it UPDATE.APP file by clicking [...] button.
Important: If program will not let you open the file because of some CRC errors, go on settings tab and uncheck Verify Header Checksum.
For me was not possible to open UPDATE.APP without previous step.
9. Find RAMDISK.img file on the list and extract it.
10. Copy RAMDISK.img file to tablet at any place.
11. Install Magisk Manager apk on tablet.
12. Follow the original guide.
Notice: Magisk will show you output location of your patched ramdisk file right after it finish processing it.
Latest update.zip for Huawei Mediapad M5 Lite 10.1 linked here:
FW version: BAH2-W19 8.0.0.230 C431 update.zip download
drumiec said:
10. Copy RAMDISK.img file to tablet at any place.
Click to expand...
Click to collapse
use
Code:
adb pull
and
Code:
adb push
to achieve the transfers as people noticed that using MTP can corrupt the file:
Code:
1. adb push /path/to/RAMDISK.IMG /sdcard
2. Patch the file using Magisk.
3. adb pull /sdcard/Download/magisk_patched.img ./
And then flash it through fastboot.
Hey Bossman, im stuck at the very end. I copied the patched magisk img to my pc folder where the adb is and when i type the fastboot flash ramdisk ****** it says
"error: cannot load 'patched-ramdisk.img': No such file or directory"
I dont know what im doing wrong?
the adb debugging on and im at the bootloader screen and my stuff is unlocked.
please help me, im not sure where im going wrong, the directions are so simple.
edit* nvm i fixed it
i had to do that adb pull and it worked from there. thank you again so much. i dont know what im going to do with this huawei device but online it said it was a good tablet to have so maybe more will come with this. if not, i can always use it as a security monitor? lol thanks again, have a great night!
sadiqkarur said:
Rooting Huawei Mediapad M5 Lite ( All Editions ).
Requirements:
1. Unlocked Huawei Mediapad M5 lite ( All Editions ).
2. Minimal ADB Tools.
3. Magisk Manager latest from magisk manager website.
4. Huawei Firmware Finder ( Download from Playstore ).
4. Original Firmware Update.zip of current device you are running (Check in your device from Huawei Firmware Finder app).
5. Zarchiver ( Download from Playstore ).
6. Ramdisk.img file ( Extracted from Update.zip ).
Procedure:
1. Download Zarchiver app in playstore and download the current stock rom update.zip ( check your version in update settings) and open the update.zip file in Zarchiver app in your tab and extract the RAMDISK.img to any folder in your tablet.
2. Open Magisk Manager app in you tab and click on 1st "install" option then "select and patch a file" then browse your RAMDISK.img you copied to your internal memory. It will patch the RAMDISK.img and store it in downloads folder in your tab.
3. Download the minimal ADB tools from any website and install them your pc.
4. Copy the patched-ramdisk.img file to adb folder in PC and open the command prompt from the adb folder .
2. Enable USB debugging setting in the tablet and connect the tablet to the pc. After connecting open command prompt in the adb folder you have installed and type
Code:
adb devices
. You must see a device in the output. ( If not properly enable your usb debugging settings).
3. After that type
Code:
adb reboot bootloader
. Your device will boot into the fastboot mode and you will see BOOTLOADER UNLOCKED on the tab screen.
4. Now type
Code:
fastboot flash ramdisk patched-ramdisk.img
( patched-ramdisk file name may differ).
5. Your device is Successfully Rooted.
Click to expand...
Click to collapse
Same issue here.
The solution is written on the Magisk Homepage:
Don't extract the file with Zarchive.
Download the file update. Zip from the Tablet to the PC (with the Huawei Tool) and unzip the file one time with 7zip.
Use the tool Huawei Firmware extracter. Disable in the settings the checksumme check and extract the Ramdisk.img. Copy the file back to the Tablet and let it patch from Magisk. Copy the patched file back to the PC, boot the Tablet into Fastboot (via adb reboot bootloader) and flash the Ram disk.img.
Remember to active at every reboot the USB Debugging in the Dev settings. It's disabled automatically.
Thanks for the guide. Should I unroot device if I get a new official update?
With the updates I lost my root access which I was using for multi user on my M5 lite Wifi
So I had to do the whole process again.
Here is the patched file for the version : BAH2-W19 8.0.0.278 (OCEC431)
so if you have the same version you can skip some steps and flash it.
firmware : BAH2-W19OCEC431B278
https://www.mediafire.com/file/mizbqmyztiuyj13/magisk_patched.img/file
You 'll have to re-edit the file to enable the multiuser (if you already did it previously the users will still have their config)
check there https://forum.xda-developers.com/p8...-root-add-multi-user-support-disable-t3602872
drumiec said:
Rooting Huawei Mediapad M5 Lite ( All Editions )
Requirements on drumiec edition:
1. Unlocked Huawei Mediapad M5 lite.
2. Minimal ADB Tools [also added to post]
3. WinRar or other extraction tool
4. Magisk Manager apk file from original XDA topic.
5. Huawei Update Extractor [UPDATED: v0.9.9.5] [also added to post]
6. Original Firmware update.zip of current device you are running from https://pro-teammt.ru/en/online-firmware-database/
I used website that actually belong to Huawei Firmware Finder aplication TeamMT, so will give you same result with searching database (look at screen1.jpg - attached to post)
When you will find your firmware version click on filelist and pick the first link, usually is the largest file from all 3 links (like 1.8GB for example).
7. Download update.zip and extract UPDATE.APP from inside using WinRAR or so.
8. Open Huawei Update Extractor and open with it UPDATE.APP file by clicking [...] button.
Important: If program will not let you open the file because of some CRC errors, go on settings tab and uncheck Verify Header Checksum.
For me was not possible to open UPDATE.APP without previous step.
9. Find RAMDISK.img file on the list and extract it.
10. Copy RAMDISK.img file to tablet at any place.
11. Install Magisk Manager apk on tablet.
12. Follow the original guide.
Notice: Magisk will show you output location of your patched ramdisk file right after it finish processing it.
Latest update.zip for Huawei Mediapad M5 Lite 10.1 linked here:
FW version: BAH2-W19 8.0.0.230 C431 update.zip download
Click to expand...
Click to collapse
tbozo said:
With the updates I lost my root access which I was using for multi user on my M5 lite Wifi
So I had to do the whole process again.
Here is the patched file for the version : BAH2-W19 8.0.0.278 (OCEC431)
so if you have the same version you can skip some steps and flash it.
firmware : BAH2-W19OCEC431B278
https://www.mediafire.com/file/mizbqmyztiuyj13/magisk_patched.img/file
You 'll have to re-edit the file to enable the multiuser (if you already did it previously the users will still have their config)
check there https://forum.xda-developers.com/p8...-root-add-multi-user-support-disable-t3602872
Click to expand...
Click to collapse
So with this file, the process from the OP is shortened to:
1. Type
Code:
adb reboot bootloader
. Your device will boot into the fastboot mode and you will see BOOTLOADER UNLOCKED on the tab screen.
2. Now type
Code:
fastboot flash ramdisk magisk_patched.img
(above file for BAH2-W19 8.0.0.278 (OCEC431)).
3. Your device is Successfully Rooted.
Is this right?
edit: to answer my own question: yes
Also, do we need to do this after every OTA update? (not that I expect so many in the future...)
Keine ramdisk Partition mehr
Hi,
since the last update BAH2-L09OCEC432B278 a ramsisk partition is no longer available.
I followed the modified guide with 7-zip and downloading the update.app on my PC and then pushing it onto the tablet with
C:\Program Files (x86)\Minimal ADB and Fastboot>adb push c:/RECOVERY_RAMDIS.img /storage/emulated/0/Download
I created the magisk_patched.img and used the pull adb command to get it back onto my PC.
I followed the steps in the guide with fastboot, but the very last command fails.
The tablet says both are unlocked, on the Magisk Website there is a short section on "Magisk in Recovery", but pushing the Power on and Volume up does not give my a Magisk option.
Update: I followed the Patching guide, but this fails with the following message:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery magisk_patched.img
target reported max download size of 471859200 bytes
sending 'recovery' (26386 KB)...
OKAY [ 0.826s]
writing 'recovery'...
FAILED (remote: partition length get error)
finished. total time: 0.842s
Hi,
I have the Huawei MediaPad M5 lite 10 but the Build Number for me is 'BAH2-W19 8.0.0.278 (OCEC432)'
and I can't seem to find the update file for it to follow the steps above?
Any help would be appreciated on what steps I need to do.
Thanks, :good:
Your Build number translates to the same firmware as mine: BAH2-L09OCEC432B278
This is a great explanation: https://www.theandroidsoul.com/extract-huawei-firmware-update-app/
Download the file from MT Team and extract is with 7Zip: https://pro-teammt.ru/en/
Hope this helps.
PS: Could you let me know if you are able to flash your phone since it is the same build?
THX!
Balamku said:
Your Build number translates to the same firmware as mine: BAH2-L09OCEC432B278
This is a great explanation:
Download the file from MT Team and extract is with 7Zip:
Hope this helps.
PS: Could you let me know if you are able to flash your phone since it is the same build?
THX!
Click to expand...
Click to collapse
Thanks for the link. reading the explanation then, mines would be BAH2-W19OCEC432B278. Thanks for that
---------- Post added at 03:51 PM ---------- Previous post was at 03:10 PM ----------
Balamku said:
Your Build number translates to the same firmware as mine: BAH2-L09OCEC432B278
This is a great explanation:
Download the file from MT Team and extract is with 7Zip
Hope this helps.
PS: Could you let me know if you are able to flash your phone since it is the same build?
THX!
Click to expand...
Click to collapse
Huawei Update Extractor: it mentions this in there but I have a MacBook and there doesn't seem to be a version for this.
Am I missing something?
Hmm, I have Linux and had to dual boot into Windows, because of several tools - this one included - wanting Windows. There is an emulator / VM available for Windows on Mac, but might be a bit over the top...