i have flashed DL00C17B573 via TWRP from AL10C00B577 as #Tahir bro told.....after flashed yea it can detects two sim card but the model number is NXT-AL10 and build number is NRD90M test-keys... ...so #EXPERTS bro whats the solution?plz hep me to refurbish the model and build number for DL00......
Related
I know that "AL10" is "China region" and "L29" is several others regions.
But do someone know what mean the differents codes on the different roms C185 - C636 - C432 - C900 ????????????????
3 days that I try to know what this codes mean !!!
On mine from "Wondamobile" (L29 gold 64 Go 2 sims) was "L29????B103", I've flashed the "L29C432B152" rom with the method "dload" and 3 buttons without unlock, without TRWP or anything, and it became "L29C900B152" and I don't understand why C432 => C900 ????
NXT-L29C432 is the 3/32 EU model and the 4/64 model is not yet available for Europe.
You probably had previously NXT-L29C185B103.
With the flashing method you used you'll get NXT-l29C432B152 only if previously having NXT-L29C432B133.
IMHO NXT-L29C900 should be a generic model type, the one that appears in the build.prop file of every NXT-L29 Mate 8.
You're not alone:
http://forum.xda-developers.com/showpost.php?p=65146273&postcount=77
Hi All
I've a confusion here...
I'm from Pakistan i.e I've middle east variant
about 3 4 month ago, I manually flashed a MarshMallow Firmware and I don't know what it was.
Now I've mt7-c900b512 on my Gold mate 7.
I just checked and found that c185b560 is the official firmware of my phone..
so question is how I can flash c185b560 to my phone
I never unlock bootloader or root this phone..
I've 1.23 Gb c185b560 firmware
Is flashing via DLOAD method will do the job?
Can c185 be flashed over c900?If yes then how??
or there is some workaround to do?
plz help me
Ijaz Farooq said:
Hi All
I've a confusion here...
I'm from Pakistan i.e I've middle east variant
about 3 4 month ago, I manually flashed a MarshMallow Firmware and I don't know what it was.
Now I've mt7-c900b512 on my Gold mate 7.
I just checked and found that c185b560 is the official firmware of my phone..
so question is how I can flash c185b560 to my phone
I never unlock bootloader or root this phone..
I've 1.23 Gb c185b560 firmware
Is flashing via DLOAD method will do the job?
Can c185 be flashed over c900?If yes then how??
or there is some workaround to do?
plz help me
Click to expand...
Click to collapse
slam dear what is issues with your device I mean why you want to change its region no matter what region firmware you install I have also mate 7 gold but I flashed different region firmware there's no issues with device and unlock bootloader ,custom recovery,root is not big deal if you tell me the exact problem then it's nice to be help you or you want to update it to latest b571...
fazi2015 said:
slam dear what is issues with your device I mean why you want to change its region no matter what region firmware you install I have also mate 7 gold but I flashed different region firmware there's no issues with device and unlock bootloader ,custom recovery,root is not big deal if you tell me the exact problem then it's nice to be help you or you want to update it to latest b571...
Click to expand...
Click to collapse
I wanna be official one as I've to return this phone to company
Ijaz Farooq said:
Hi All
I've a confusion here...
I'm from Pakistan i.e I've middle east variant
about 3 4 month ago, I manually flashed a MarshMallow Firmware and I don't know what it was.
Now I've mt7-c900b512 on my Gold mate 7.
I just checkedw
and found that c185b560 is the official firmware of my phone..
so question is how I can flash c185b560 to my phone
I never unlock bootloader or root this phone..
I've 1.23 Gb c185b560 firmware
Is flashing via DLOAD method will do the job?
Can c185 be flashed over c900?If yes then how??
or there is some workaround to do?
plz help me
Click to expand...
Click to collapse
Hi, I'll try to explain what happened and what you have to do.
The firmware that you have flashed (B512), corresponds to devices with region: hw / spcseas (Asia) And your phone came out of the factory with the version: hw / meafnaf (Middle East). This way you will not be able to update via ota or via DLOAD.
When installing a different region on another is in error. obtaining compilation C900B514 / C900B522 / C900B560. Then this way it is not possible to update.
There are four regions:
hw/spcseas (Asia C636B512)
hw/meafnaf (Middle East C185B514 / C185B560)
hw/cn (China C01B351 )
hw/eu (European C432-B522 /C432-B560/C432-B571)
check your current region. dial *#*#2846579#*#* then tap on network information>vendor country info.
What you have to do is a rolback with the c900b500 transition package (Works for any region) and then install the corresponding version with each region
Bought phone Mate 9 second hand.
How can I be sure what version is it or if its been rebranded?
About phone says its a MHA-L09 and build is L09C432B182
I tried to upgrade it to newest b193 with method in this post [Guide] Mate 9 Flash Update Package and Rebrand
but after upgrade i noticed I lost MEID just zeros, same with PESN when type: *#06#
I am not sure if those numbers were the same before upgrade or something just went wrong.
Other thing is that phone doesnt recognize sim cards after upgrade, it works fine with b182, even if I do upgrade with normal software upgrade throuh phone it finds b190 and again sim is not recognized.
It made me thinking ,how can I actually know what version of Mate 9 i have? I went to huawei web site to check warranty (http://consumer.huawei.com/in/support/warranty-query/index.htm) for this phone and acording to its serial nr/ imei and it says its a MHA-L09B ?im slightly surprised as i found out L09B is an Australian model? live in UK . my serial nr is UGM0217122003582 can someone advice? also if its L09 so i suppose it should have only 1 sim , then why if i go to mobile network there is an sim 2 network field (grey out) ,is that how it should be?
thx
You have 2 sims cause u rebranded ur phone from single sim l09 to dual sim l29.
Better to rebrand it back to l09 so you can hve ur iemi back and working network.
Read carefully , I have IMEI with all brands , I lost MEID and PESN not IMEI, also never rebranded to any l29 always used l09 that's the point
mixMZ said:
Read carefully , I have IMEI with all brands , I lost MEID and PESN not IMEI, also never rebranded to any l29 always used l09 that's the point
Click to expand...
Click to collapse
Are u sure it was L09 Firmware u used? Because if it shows that u have 2 sim now u used L29 Firmware when u flashed it, if u flash a L09 that is the singel sim version with a L29 Firmware it will show that u have 2 sim slots in the Settings.
Sent from my LON-L29 using XDA Labs
1. bought phone mate 9
2 have no knowledge of its history and if it was rebranded or not.
3. phone info clearly shows MHA - L09 C432B182, IMEI was also there and mach serial number according to huewai warranty checker
4. tried to upgrade many times to newest MHA-09 C432193 but always had some issue with it finaly somehow i did it, phone info was showing MHA - L09 C432B193 IMEI was there but i noticed there is no MEID just zeros
5. confirmed that with dialler: *#06# MEID and PESN have just zeros IMEI is there
6. inserted sim and phone had to noticed its there as had pop up from sim vodafone if i want to use prepay or postpay, after selecting either of two : no service.
7 in settings , mobile network there are 2 sections sim 1 and sim 2 both ,grey out
8 rebranded phone with MHA - L09 C432B186, all went ok but results the same, phone upgraded mobile network still shows sim 1 sim 2 both greyout, no service
9 again flashed phone with MHA - L09 C432B182, straight away phone picked up signal. mobile network still shows sim 1 filled with info and sim 2 greyout.
10.having installed MHA - L09 C432B182 i upgraded software through official way settings ,system upgrade : system found MHA-L09C432B190 proceed with that , as a result system upgraded but again sim 1 sim 2 grey out no service.
Thats why im wondering if there is any way to find out phone original region/brand/version ? how can i know if i got L09 or L29 regardless software it has installed?
Something there is definitely not right if the official phone upgrade screws things up ,there is no service and only firmware that works is 182.
mixMZ said:
1. bought phone mate 9
2 have no knowledge of its history and if it was rebranded or not.
3. phone info clearly shows MHA - L09 C432B182, IMEI was also there and mach serial number according to huewai warranty checker
4. tried to upgrade many times to newest MHA-09 C432193 but always had some issue with it finaly somehow i did it, phone info was showing MHA - L09 C432B193 IMEI was there but i noticed there is no MEID just zeros
5. confirmed that with dialler: *#06# MEID and PESN have just zeros IMEI is there
6. inserted sim and phone had to noticed its there as had pop up from sim vodafone if i want to use prepay or postpay, after selecting either of two : no service.
7 in settings , mobile network there are 2 sections sim 1 and sim 2 both ,grey out
8 rebranded phone with MHA - L09 C432B186, all went ok but results the same, phone upgraded mobile network still shows sim 1 sim 2 both greyout, no service
9 again flashed phone with MHA - L09 C432B182, straight away phone picked up signal. mobile network still shows sim 1 filled with info and sim 2 greyout.
10.having installed MHA - L09 C432B182 i upgraded software through official way settings ,system upgrade : system found MHA-L09C432B190 proceed with that , as a result system upgraded but again sim 1 sim 2 grey out no service.
Thats why im wondering if there is any way to find out phone original region/brand/version ? how can i know if i got L09 or L29 regardless software it has installed?
Something there is definitely not right if the official phone upgrade screws things up ,there is no service and only firmware that works is 182.
Click to expand...
Click to collapse
Can u check Project Menu to see in Veneer Informations if u can find anything there? Dail *#*#2846579#*#* or maby Dc Unlocker/Phoenix can get some info about the phone, and u have HCU-CLIENT.
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
http://hcu-client.com
Sent from my LON-L29 using XDA Labs
Seems it was single sim branded phone and the previous owner has flash it to single sim unbranded.
I think l29c636 firmware can fix it. Just flash an approved firmware.
I need the oeminfo to l09c605, could anyone help me? I had installed l09c432 (rebrand) on my c605 and now it shows me that i have 2 sim cards, but my version is l09.
jonascrstm said:
I need the oeminfo to l09c605, could anyone help me? I had installed l09c432 (rebrand) on my c605 and now it shows me that i have 2 sim cards, but my version is l09.
Click to expand...
Click to collapse
Are you sure that you installed L09c432? It is one-sim model. May be you applied L29c432 - it is dualism.
5[Strogino] said:
Are you sure that you installed L09c432? It is one-sim model. May be you applied L29c432 - it is dualism.
Click to expand...
Click to collapse
Yes, I am. I'll do it following the tutorial available on XDA. The software is working well, the only strange thing was that.
hi! i had the same problem as you so i have the l09c605b111 and rebranded to the l09c432b194 and the problem appear like you, detected as double sim and if i turn off the phone i have to wait to turn on and eject the sim card and insert to get signal, that was a problem so i have my oeminfo backed up at home i made it with TWRP i can send it to you when i get home!. i rebranded again using the l09bc605b115 from FIRMWARE FINDER and its working like a charm!.
slsl said:
hi! i had the same problem as you so i have the l09c605b111 and rebranded to the l09c432b194 and the problem appear like you, detected as double sim and if i turn off the phone i have to wait to turn on and eject the sim card and insert to get signal, that was a problem so i have my oeminfo backed up at home i made it with TWRP i can send it to you when i get home!. i rebranded again using the l09bc605b115 from FIRMWARE FINDER and its working like a charm!.
Click to expand...
Click to collapse
Thanks for info. Probably, existing oeminfo L09C432 was modified from L29's oeminfo (Just changed 2 to 0 in file).
But it is root of problem, that goes to double-sim detection.
Overall, need original oeminfo. I will make request in special thread: https://forum.xda-developers.com/mate-9/development/oeminfo-library-t3555353/post74465934
Hello, i have managed to softbrick my device with bad choice on hiproxy update
i have sent phone to repair and after flashing they sent it back
now my fingerprint and faceunlock wont enrol and setup
so i noticed that both dual-sim imei are ok but serial number of device is 0123456789abcdef
when they sent it back it had emui 9 so i flashed it back into emui 10.1
how can i restore my serial no.(i have my original number) and will it solve the issue with
seting up fingerprint/faceunlock !?
Thanks