I was using the tablet and it re-booted to a boot loop. It cannot be stopped boot looping except to enter Odin mode. It will just boot loop until the battery runs out.
I've tried the myriad of advice on here and elsewhere trying to re-boot it, or at least boot to recovery but nothing works.
I've also tried to flashing back to original f'ware with Odin but it fails.
Before the boot loop it was happily running cm12.1 from here (the n8020 rom within the thread):
https://forum.xda-developers.com/galaxy-note-10-1/orig-development/rom-cyanogenmod-12-0-t2996920
Has my hardware fried itself? Or is there anything I can do?
Any help appreciated. :crying:
Same Problem with a N8010 Stock KitKat rom. Nothing except ODIN works
Will try to flash the TWRP and hope to get the recovery mode back.
Tried twrp-2.8.6.0-gt-n8010.tar with ODIN 3.12.3 - 3.09 and recovery-stock-dnj1-GTN8010.tar with 3.11.1 and 3.07 ... everthing failed, most after NAND write start. Possible the memory is broken?
Any ideas? Any way to check the internal memory/storage?
https://forum.xda-developers.com/search/forum/1737?query=Nand write
Any way to check the internal memory/storage? TRY a service center .
Related
OK so I was playing with my tablet and it froze, so I pressed the power button for 10 secs and it rebooted only to get stuck at the Samsung screen. Tried again to hold power rebooted and no go. So I try boot into recovery and it wont boot so then I tried download mode and it worked.
I then put official JB 4.1.2 firmware via Odin 3.04 and still wont boot still stuck at Samsung screen then I tried several different cwm to try get recovery back and still no go. Tried ics 4.0.3 and nada. Tried updating boot loader still not working.
I dunno what else I can do.
I was using zap blaster rom prior and overclocked the gpu to 512mhz and cpu to 1.42ghz been working great for past 3 months. Now I cant get warranty as flash counter says 6. I suspect I might have emmc bug.
Any help and ideas would be much appreciated.
Well just tried more firmwares but still cant get it going. I'm really puzzled why it wont boot. I thought download mode would have fixed my problem. is there another way to flash the firmware other than Odin?
I have a similar problem. Following this guide: http://forum.xda-developers.com/showthread.php?t=1722745
I tried to restore the P5100 to stock (This is the firmware I downloadad: http://samsung-updates.com/details/....1_3G_plus_WiFi/GT-P5100/TPA/P5100UBDMD2.html)
Now my device is stuck in charging boot loop. I can enter stock download mode (however Odin fails at the "setupConnection")
Any advice? I just want to return to stock.
I was on CM10
Greetings,
When I was flashing via odin stock rom somehow it got stuck on setup connection and I had to close it. Since then the tablet wouldnt boot into recovery mode and wont boot at all. It goes to first samsung logo and gets blank. I tried flashing stock roms even with options repartition via odin in download mode but no luck.
Any insights people?
hardik_hrc said:
Greetings,
When I was flashing via odin stock rom somehow it got stuck on setup connection and I had to close it. Since then the tablet wouldnt boot into recovery mode and wont boot at all. It goes to first samsung logo and gets blank. I tried flashing stock roms even with options repartition via odin in download mode but no luck.
Any insights people?
Click to expand...
Click to collapse
I have this same problem. Bump.
Hey guys, I only suggest the following, cause I had the same problem after flashing via odin.
In fact it happened to me more than once since I forgot the solution after a while ...
Make sure you unplug the USB cable from your tablet before trying to get into recovery mode.
That did it for me both times - once with my S4 and just recently with my Tab 2...
I had CM10.1-3 stable installed, and everything was perfect, then I turned on the native encryption, the tablet started to acted slow but working, one day I woke up and find the tablet will not turn on so here is what I have done
Restarted the tablet, entered the decryption password and still hanged
Restarted the tablet again and then it boot loops on Samsung galax tab 2 10.1 screen
Restarted again and it will not boot at all
No recovery
I can access download mode
So I did try to reflash CWM 6.0.2 again with heimdall and it failed
All I got was "Firmware error occurred while updating please use kies the phone ! computer screen"
No other mode is working
Got Stock rom 4.2.2 tired with odin finishes but still reboot is black screen
Got esspreso_16G PIT file repartitioned and reinstalled the stock rom still no booting
Using heimdall repartitioned with resspreso PIT file from 201202 and I got DOWNLOAD MODE AGAIN !
Try to install orignal rom or CWM brick again
Using heimdall repartitioned and installed stock kernel only and x-loder
So currently it is charging and have DOWNLOAD MODE stating count of customes and kernel of SMASUNG_OFFICAL
My question is, is this software brick or hardware ? and how I can get the tablet up and running again using ODIN or Heimdall ?
Thank You
d
I am not sure, but what i would try:
Try Odin, flash Stockrom - uncheck "Auto-Reboot" !
When Odin finished directly boot into recovery from downloadmode.
Make a factory reset if recovery booted.
Reboot device.
Android-Andi said:
I am not sure, but what i would try:
Try Odin, flash Stockrom - uncheck "Auto-Reboot" !
When Odin finished directly boot into recovery from downloadmode.
Make a factory reset if recovery booted.
Reboot device.
Click to expand...
Click to collapse
Did try that, Odin 3.07 or something keeps flushing everything but the download mode on the tablet froze on 25% of the blue bar. then I get again error will firmware update, so I add again to heimdall and repartitioned and tried to flash the rom part by part starting with MLO as X-Loader and it told me successful with no reboot, tried to flash factorysysfs also stuck at 28% with heimdall, had to do reboot of the device, now the device is just blank black, no download mode, or the emergency firmware update via kies screen "phone ! computer" no idea what should I do :s it seems dead.
Why are you flashing pit-files all the time????? these files can difenitly dangerous and can kill your tab with a breeze if not used with care ....
you can´t do nothing with odin or heimdall if you don´t have downloadmode or "Black screen of death" ("Firmware error occurred while updating (...)")...
good luck
Android-Andi said:
Why are you flashing pit-files all the time????? these files can difenitly dangerous and can kill your tab with a breeze if not used with care ....
you can´t do nothing with odin or heimdall if you don´t have downloadmode or "Black screen of death" ("Firmware error occurred while updating (...)")...
good luck
Click to expand...
Click to collapse
It was the only way to get back to DownloadMode is by flashing PIT file, however I managed to flash orginal Kenerl back at that time and I did manage to flash X-Loder seems that what bricked the tablet, Now when I am connected to the PC I can see OMAP4430 driver, Some saying I need to use JTAG "RIFF BOX" or maybe OMAPFlasher but I am not sure if this the correct step or not, what really bothers me that when I had DownloadMode odin will not finish more than 28% of the rom. what do you think should I use OMAPFlasher ? and if there any guide to do so ? I just need the tablet to have bootloader and Kernel so I can flash back with Odin.
D
It was on stock ROM and I had rooted it. Had not used it for a while.
Got some free time so decided to reset/format the tablet and start from scratch.
Decided to install stock ROM using Odin and downloaded firmware(N8013UEUCOI1_N8013XARCOI1_XAR) and the process went smoothly and passed. :good:
But it was stuck in a boot loop so I tried recovery and that was gone so went back to download mode and tried other firmware other recoveries. Everything shows successful with Odin but am back to square one.
Other firmwares tried -
N8013UEUCOI1
N8013UEUCMI3
N8013UEUCMD3
N8013UEUCMC2
N8013UEUCMB3
N8013UEUCMA3
N8013UEALI3
Tried recovery install with Odin using .tar files CWM TWRP and Phil did not take
Model: GT N8013 EA16ARB (16GB Wifi only)
Only able to get into download mode - cannot get into recovery mode.
Any suggestions?
I am having a similar issue with not getting pass the SAMSUNG logo after the little boot animation. I have never had this much trouble with going back to stock on any device before...
Back last year I thought that I had finished off my tablet, however after following this I was able to recover it. I don't recall much from what I had done so please use at your own risk.
http://forum.xda-developers.com/showthread.php?t=2713297
Greetings, community
I had a hard time yesterday figuring out how to revive my Tab2... My device is (or was) a Tab 2 Wifi P5110 with the Germany 4.2.2 stock ROM installed.
I accidentially (...) flashed TWRP image with ODINs BL (!) option... (3.13) don't ask why... gave me no error... After that it wouldn't want to boot nor it wanted to go to recovery anymore... just a blank screen with backlight on. The only thing that still worked was the download mode.
So to rescue the OS I downloaded the stock 4.2.2 tar (Germany / DBT-P5110XXDMI1-20131118182728) and flashed it with ODIN 3.07 / AP. That worked without errors and after reboot the tablet booted normally to the GUI. :angel:
So far so good, but as I want to get a CustomROM to the device I wanted to get into recovery mode. I tried to get to stock recovery with Pwr+Vol- but the Android Robot didn't show up (I did before my BL-FLash... the day before) and I ended up with just a blank black screen (with backlight on). I tried flashing TWRP with ODIN 3.07 / AP with no other result.
How can I fix that? Have I destroyed some part of my bootloader (?) or bricked my recovery mode with that BL flashing action? What else can I do to get at least the stock recovery and/or TWRP back?
Anybody a glue?
Thanks in advance,
stefl0n