Greetings,
When I was flashing via odin stock rom somehow it got stuck on setup connection and I had to close it. Since then the tablet wouldnt boot into recovery mode and wont boot at all. It goes to first samsung logo and gets blank. I tried flashing stock roms even with options repartition via odin in download mode but no luck.
Any insights people?
hardik_hrc said:
Greetings,
When I was flashing via odin stock rom somehow it got stuck on setup connection and I had to close it. Since then the tablet wouldnt boot into recovery mode and wont boot at all. It goes to first samsung logo and gets blank. I tried flashing stock roms even with options repartition via odin in download mode but no luck.
Any insights people?
Click to expand...
Click to collapse
I have this same problem. Bump.
Hey guys, I only suggest the following, cause I had the same problem after flashing via odin.
In fact it happened to me more than once since I forgot the solution after a while ...
Make sure you unplug the USB cable from your tablet before trying to get into recovery mode.
That did it for me both times - once with my S4 and just recently with my Tab 2...
Related
OK so I was playing with my tablet and it froze, so I pressed the power button for 10 secs and it rebooted only to get stuck at the Samsung screen. Tried again to hold power rebooted and no go. So I try boot into recovery and it wont boot so then I tried download mode and it worked.
I then put official JB 4.1.2 firmware via Odin 3.04 and still wont boot still stuck at Samsung screen then I tried several different cwm to try get recovery back and still no go. Tried ics 4.0.3 and nada. Tried updating boot loader still not working.
I dunno what else I can do.
I was using zap blaster rom prior and overclocked the gpu to 512mhz and cpu to 1.42ghz been working great for past 3 months. Now I cant get warranty as flash counter says 6. I suspect I might have emmc bug.
Any help and ideas would be much appreciated.
Well just tried more firmwares but still cant get it going. I'm really puzzled why it wont boot. I thought download mode would have fixed my problem. is there another way to flash the firmware other than Odin?
I have a similar problem. Following this guide: http://forum.xda-developers.com/showthread.php?t=1722745
I tried to restore the P5100 to stock (This is the firmware I downloadad: http://samsung-updates.com/details/....1_3G_plus_WiFi/GT-P5100/TPA/P5100UBDMD2.html)
Now my device is stuck in charging boot loop. I can enter stock download mode (however Odin fails at the "setupConnection")
Any advice? I just want to return to stock.
I was on CM10
Hello, i am having a big problem with my samsung epic 4g touch! Im not sure to exactly what caused this... But i was installing the CW Mod recovery with ODIN. Then i rebooted off of download mode. And my phone stays on the booting screen. I heard of this many times. But this booting screen has a type of caution sign below it, i am still able to enter recovery mode and download mode. In recovery mode, ever single option says -NO though.. Im not sure if i bricked my phone or what? Can anyone please help me!
Thankyou.
Get back into download mode, flash cwm again, GO STRAIGHT INTO CWM!!!! The ROM you had before using ODIN will not boot, you're forced to boot into recovery immediately. Make sure you have a ROM zip to install a ROM right after, you'll have issues if you try to boot TouchWiz stock. The triangle on the GS2 logo is normal, it means you've flash custom stuff through ODIN.
Pretty sure it's hosed but I will ask anyway.
What I have is a verizon S6 that is on AOE2, stock other than root.
What I did to cause brick: I tried flashing wifi tether mod, but flashed the AOC3 version by mistake. I flashed via flash fire but it is stuck in a boot loop.
The problem: Boot looping at verizon screen. Odin and smart switcher wont see the device in recovery/odin mode.
What I have tried: Clear cache and factory reset, No change. I tried odin but the pc does not see the phone in recovery. Same with smart switch and ADB. They do see the device during boot up prior to the reboot, about 38seconds during the verizon logo. Also they see it with the phone completely off but won't allow any changes.
Not sure what the problem ended up being, but finally got odin to pick it up. I think it was a bad copy of odin. I had odin zip on memory stick I used on each system to rule out pc as cause. Re-downloaded odin and tried again, seen it no problem. I just wanted to personally thank each of you for taking the time to help!
liquidtoon said:
Pretty sure it's hosed but I will ask anyway.
What I have is a verizon S6 that is on AOE2, stock other than root.
What I did to cause brick: I tried flashing wifi tether mod, but flashed the AOC3 version by mistake. I flashed via flash fire but it is stuck in a boot loop.
The problem: Boot looping at verizon screen. Odin and smart switcher wont see the device in recovery/odin mode.
What I have tried: Clear cache and factory reset, No change. I tried odin but the pc does not see the phone in recovery. Same with smart switch and ADB. They do see the device during boot up prior to the reboot, about 38seconds during the verizon logo. Also they see it with the phone completely off but won't allow any changes.
Click to expand...
Click to collapse
It's not all lost keep experimenting with Odin you should be able to recover from that. Be sure you just go straight to download mode once it boots up. I don't see why you should have problem getting it back.
Sent from my SM-G920V using Tapatalk
MrWicked1 said:
It's not all lost keep experimenting with Odin you should be able to recover from that. Be sure you just go straight to download mode once it boots up. I don't see why you should have problem getting it back.
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
So I guess I am not sure what to try. I do see the device in odin when it is booting but it loses it again when it reboots. It doesnt seem to be long enough to do anything. All I have tried is flashing AOC3 to the AP. Is there something else I can try?
Also I am not sure why, or if it is normal, but with the device completely off odin sees it. Again all I have tried is flashing the AP, and I tried smart switch in this set up as well but didnt get anywhere.
I wasn't sure what all the mod changes and if it might be kernel or something other than the OS but I am not sure how to tell or what to try if it is.
use a diff usb port/cable and flash oe2 firmware tar in AP slot. should be able to boot after that.
DeathAngel66669 said:
use a diff usb port/cable and flash oe2 firmware tar in AP slot. should be able to boot after that.
Click to expand...
Click to collapse
Tried 3 computers , few cables and every port. Seems it is something to do with it being in recovery that PCs wont see it.
Are you trying in Download Mode? Holding Power+home+down vol, then UP vol to get into Download Mode?? Tried re-installing Verizon s6 drivers and rebooting the PC? Recovery Mode won't let you re-flash with ODIN....
No reason it would be bricked from flashing a wifi tether mod.
Download Odin 3.10.6 and the Stock OE2 Tar:
http://forum.xda-developers.com/verizon-galaxy-s6/general/verizon-s6-stock-restore-files-t3096000
Reboot your phone into download mode as per DeathAngel's instructions. Odin should see the phone, flash the Tar in the AP slot. When it reboots, hold VolUp, VolDown, Home, and Power for a few seconds until it reboots again. Boot into recovery, do a factory reset.
If Odin isn't picking it up in download mode than you have a driver/cable issue.
I've experienced trouble since trying to switch custom ROMs
After using TWRP to install the new ROM, my phone (920w8) wouldn't get past the Samsung flashing...
I've reinstalled TWRP via ODIN...but now my phone is stuck on the Samsung Galaxy S6, powered by Android logo...
I can get into download mode but the phone won't boot and won't enter recovery mode.
Any ideas?
thanks
Just flash stock ROM via Odin
Thanks...I reluctantly reached the same conclusion...
I have a backup of my apps and data, but it's just a nuisance to go back to stock and start over...
But, here goes !
After I downloaded TWRP my phone keeps rebooting over and over again. It won't let me in I can only go into recovery mode or download mode. I tried going into safe mode but it won't let me in and I tried ending the loop by going into download mode then trying to go back but it's still looping. My phone is Samsung Galaxy S7 edge SM-G935W8 pls help I need my phone
Welcome to XDA!, Would recommend to navigate to Galaxy forums, over there you will get better chances to get help on your issue.
Good luck and enjoy the forums!
lil waterdrop said:
After I downloaded TWRP my phone keeps rebooting over and over again. It won't let me in I can only go into recovery mode or download mode. I tried going into safe mode but it won't let me in and I tried ending the loop by going into download mode then trying to go back but it's still looping. My phone is Samsung Galaxy S7 edge SM-G935W8 pls help I need my phone
Click to expand...
Click to collapse
Start the flashing process immidiatly after you reboot to download. In Odin, the recovery partition is always flashed first.
Tab E said:
Start the flashing process immidiatly after you reboot to download. In Odin, the recovery partition is always flashed first.
Click to expand...
Click to collapse
^
this comment is true i experience this and you just really need to start the flashing process immediately.Once odin or fastboot is initiated connection to your device the bootloop will eventually stop so you can flash your stock rom or the partition that got corrupted ...