Guys please do help me
I am Using HTC Explorer(pico A310e) model.my phone is rooted and has a custom rom Cynagon Mod 10.when i placed the rom every thing is fine including bluetooth works fine,but after a day or more when i switch on the bluetooth,the phone restarts showing the bootloop screen.and also mobile internet gets on by itself even though i keep it OFF.
i thought it was a boting problem and i rebooted the same OS again but the same problem continues..pllllllzzzzzz do some one help me i am sooo worried of this
Hey all , Look I've been looking around the forums looking and following solutions..
At first my P500 started to get no service.
Than the phone got really hot, Than left it on charge over-night because the battery was draining heaps !
(Found out the battery went dead. got a new battery etc)
Woke up , and my phone was repeatedly displaying the "LG" logo.
It'll idle on that for about 3 seconds, than restart and it'd come up again.
I cannot access recovery mode or any other mode, BUT only emergency mode.
I flashed the 10A firmware on my p500 , worked fine, than installed Facebook, Than it turned off again and is currently doing the same "LG LOGO"
thing.
I have tried and tried repeatedly to reflash the firmware again (USING KDZ)
Is there any hope i can get my phone up and running? thanks guys.
LayALAD said:
Hey all , Look I've been looking around the forums looking and following solutions..
At first my P500 started to get no service.
Than the phone got really hot, Than left it on charge over-night because the battery was draining heaps !
(Found out the battery went dead. got a new battery etc)
Woke up , and my phone was repeatedly displaying the "LG" logo.
It'll idle on that for about 3 seconds, than restart and it'd come up again.
I cannot access recovery mode or any other mode, BUT only emergency mode.
I flashed the 10A firmware on my p500 , worked fine, than installed Facebook, Than it turned off again and is currently doing the same "LG LOGO"
thing.
I have tried and tried repeatedly to reflash the firmware again (USING KDZ)
Is there any hope i can get my phone up and running? thanks guys.
Click to expand...
Click to collapse
Using KDZ is dangerous. Word of advice: NEVER EVER INTERRUPT THE FLASH OR TAJE OUT THE BATTERY. Use lgdmp if you have to reflash.
Sent from my LG-P690 using xda premium
Will i be able to flash it using "emergency mode" ?
edit: Flashed, But still constant "lg logo"
Nevermind that, Checked the ERASE EFS ALL Option, Phone is now charging and past the Lg logo !
But restarts sometimes, and constantly has the lg logo when i remove the usb cable.
LayALAD said:
Nevermind that, Checked the ERASE EFS ALL Option, Phone is now charging and past the Lg logo !
But restarts sometimes, and constantly has the lg logo when i remove the usb cable.
Click to expand...
Click to collapse
Are you able to boot your phone into system? Which ROM, kernel and baseband you are using?
rishabhgangwar said:
Are you able to boot your phone into system? Which ROM, kernel and baseband you are using?
Click to expand...
Click to collapse
The phone will not turn on without it plugged into power.
I turn on wifi.. Instant turn off.
I cannot get past the android logo now, leaving it on to charge over-night (charges fine)
It aint the battery (got 2)
The android sound plays than turns off,
Anything i should do before the next step?
I flashed the stock virgin mobile australia v20E firmware.
Kernel is 2.6.35.10-perf (managed to reflash it to boot it up again)
/bump.
Hello guys I have been struggling for the past week, my LG G2 phone has been rooted, I flash a custom recovery TWRP then I lunched to my stock rom I then tried to update my firmware to 4.4.2 kitkat the update was downloaded successfully, then it told me to reboot, so I did phone switched off then I was stuck on a boot loop but this time it was a boot loop with a error message on the left top corner. and then it would take be to a dim back screen. I searched the entire week to find a method to get me through the start screen and I found this -> NO Recovery mode, No download mode, after OTA on rooted LG G2 http://forum.xda-developers.com/showthread.php?t=2582142 I done exactly what it was showing, then my phone switched off and now it won't power up. Then I tried turning it on NOTHING phone does't show the LED charging lights, does't respond to the usb being plugged in can't do ANYTHING I am guessing the battery has died so now I don't know what to do, either contact LG or should I try getting a battery that is fully charged or even use a factory cable any ideas guys ?
Call LG support.
Sent from my g2 using Tapatalk
Hello I got LG P990 from cousin and I rooted it and flashed CanogenMod 7.2.0 and it worked perfectly until yesterday, when phone with 70-80% battery percentage sBlank/shut down and when turn on it says 0% battery but when plug in charger it says 60-70%?? WTF?? Than I tried flashing stock rom and again cm7 but dodnt helped... Than I tried my father s battery and phone worked perfectly than I boguht new battery and this is what happens: I turn on phone and when I unlock screen it says SHUTTING DOWN SYSTEM and circle loads and shut down, normaly. but why?? I must calibrate battery I tried charging but it seems phone dont show correct stats with this battery, than I tried reflashing rom and hard reset but didnt work, than I put old battery, phone works but with shutdown problem after 1-2mins of usage. PLS HELP MEEE! AND GIMME A PAGE WERE ARE ANDROID GINGERBREAD (2.3.X) BASED CUSTOM ROMS TO TRY OR MY STOCK EUROPE ROM 2.3 TO TRY PLEASE HELP IF PROBLEM IS NOT ROM WHAT IS?????? :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Hello
I am new to working on these phones so I apologize in advance if I don't properly state any processes or terms correctly.
I have a stock non modded Verizon LGG3 VS985 that experienced problems with WiFi and Bluetooth not working and significant battery drain. This happened right after a recent update to marshmallow. I tried cache clearing, safe mode, hard reset and nothing solved the problem. I decided I wanted to take the phone back to factory condition. I started with the LG flash tool that uses the .tot and a .dll. I ran the flash and when the program got to approx. 80%(at checking mini os phase of the flash) the phone began to reboot and only got as far as the LG logo and after about 2 min of the phone trying to reboot the flash program said fail, usb connect or something like that. At this point the phone will only start and go into a loop that includes the vibrate and the LG logo. and that will cycle until I believe the battery would die if allowed. I then found a link here at XDA (https://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140) that uses the KDZ method, was well written and easy to follow. I ran it on the phone and it was going great. The flash program got to 88% and the phone went into the boot loop with the vib and LG logo . The flash program continued to run until it was complete while the phone was in the boot loop and it got to 100% and said that the software installed. I powered down the phone via battery removal and now when it tries to boot it vibes, shows the lg log and then the green android symbol shows for about 2 seconds and then it does it all over again. I have tried a hard reset and nothing changes. I appreciate any ideas any of you may have on what I can try to get this resolved. Thank you.
Thread closed
Reposted here
https://forum.xda-developers.com/lg-g3/help/verizon-lgg3-vs985-booting-t3550589