Recently we’ve received complaints on the factory reset protection issue that’s been added on the Android platform to make its security stronger. So we at NettoHub will once again be ending the frp issue with a viable solution that won’t take long and will unlock or bypass the frp “factory reset protection” on your Mediatek Android phones, mod edit - link removed Meanwhile if you’ve had any issues earlier with a different fix or solution and have maybe soft bricked your phone on the way then follow this link to fix your phone back to factory settings. If you don’t have any issues besides the frp issue and want to mod edit - link removed make or keep a backup of your phone’s firmware then proceed via this link to keep a clean OS back up
Okay without further ado I’ll like to proceed with the instructions and guidelines to fixing the frp issue.
Disclaimer: Please y’all should make sure to follow the guidelines and instructions to prevent any future clashes or problems as mod edit - link removed would not be held responsible for any damage caused by your inability to follow instructions.
What you need:
A Computer.
A Usb Cord.
Miracle Box Ver 2.27A.exe
That’s all
How To Bypass Google FRP Lock On Any Mediatek Android Device.
FIRST METHOD: The easiest way to Unlock FRP on some MTK devices is to skip the Wifi network request page.
SECOND METHOD:
IMPORTANT:The software you just downloaded will be totally useless if you fail to get this step right.
You MUST Manually Install the MTK 65xx Preloader driver from Device manager > Add Legacy Device > Install Manually > Select i Have disk > Select Driver > Next.
Windows 7 32bit and 64bit PC is recommended but Windows 8 and 10 can work if driver signature verification is turned off.
Launch the Miracle Loader and select the UNLOCK/FIX tab >> Check the box for “Clear Settings/FRP”and click the START Button.
Now, Turn off Mobile Phone and connect to PC USB while “Waiting for USB Port” message is displayed on Miracle Box.
If MTK Preloader drivers was successfully installed, the commands to Bypass FRP will be installed and status should display DONE. At this point, remove / reinsert the battery and Turn on the device. It should allow you SKIP wifi > and finish initial setup without requesting for Google Account previously used on the device.
Download links removed as PPC links are not allowed on xda
Regards
Sawdoctor
Hi, I downloaded Miracle Box from GetDroidTips and scanned it with VirusTotal. It says it's a virus, and when I put it in a VM, it prompted me to start a process impersonating a critical Windows service as administrator. Where can I download the legitimate version?
Related
Hello!
Help restore phone worked just fine before lunch Today, then switches off by itself and all. when running vibrates but does not run
.Thought battery-it whole. Display-a.
decided to restore the firmware without a battery when connecting USB Device driver Omap4430 prevailed. no more drivers do not see anywhere else!
using LG flash tool tried to recover-it does not see the phone.
using UpTest also doesn't see the phone.
Window 8 x 64
Who has encountered this problem, and I do not understand what port you need to replace
?
P.S. Head boils. sorry for my broken English
From sda171 about Windows 8:
I just wanted to add something for fellow Windows 8 users following your guide. By default, windows 8 does not allow driver which are not signed to be installed. You wont even be prompted to force install it. It will deny the installation without your knowledge (this happened to me and I had no clue). In addition to installing every app as administrator. You have to disable driver signature verification on your windows 8 computer.
To do that.
Go to PC settings > General > Under Advanced startup , click restart now > at the boot up screen click 'troubleshoot' > advanced options > startup settings > restart > then press the corresponding number to temporarily disable driver verification (it was 7 for me).
Then do all the driver installing as stated in the awesome guide. If you restart after the disabling the verification is enabled again. It works for only one boot and has to be done again if required (in case you restart after disabling). The verification has to be disabled for successful installations of the drivers u install or else it wont work for you on windows 8.
.
So this is my second post on XDA.
LG L50 Sporty is also known as LG L50 D213N.
It is not so high level device and so maybe is not of wide interest. But ...
After searching a whole internet I was root it. So other don't have to go through.
Maybe this post will look as long procedure (first view) but actually is not.
There are a couple preliminary steps but just three steps to root.
________________________________________ [I am not native with English language, sorry about that.]
_____________________ Guide: How to root LG L50 Sporty
PRELIMINARY: steps before rooting your mobile
P1: If you have important data on your mobile phone back them up before starting.
The process itself will not erase your data but it is better to have insurance before modifying the system.
P2: Enable USB debugging option on device:
_____Settings > Developer options * > USB debugging >> turn on.
__________* Developer options screen is hidden by default. If this tab does not appear enable it:
____________Settings > About phone > Software information >> tap Build number 5-10 times.
P3: Enable Unknown sources option:
_____Settings > Security > Unknown sources >> turn on.
P4: Enable Stay awake option:
_____Settings > Developer options > Stay awake >> turn on.
P5: The device should have 90% or more of full battery.
P6: All the specific drivers needed to install in the computer should be done before rooting *.
_________* > go to the LG Electronics official site
__________ > type the name and model of your device in the search box,
__________> select your device and click the PRODUCT SUPPORT,
__________> in the support page, click the SOFTWARE UPDATE tab,
__________> download the drivers and install onto to your computer.
P7: Download and install *: 15 seconds ADB Installer - Version 1.3.
__________* 15 seconds ADB Installer you can find here on the forum: http://forum.xda-developers.com/showthread.php?t=2588979;
____________follow Install process instruction given by the author.
P8: Download the PurpleDrake *, extract it and place at the comfortable space on your computer where remember.
__________* PurpleDrake you can find here: http://downloads.codefi.re/thecubed/lg_g3/purpledrake/PurpleDrake-Lite_R03.tar.gz
___________ You need 7-Zip (or similar) to extract tar.gz file ( ... it will be two successive extractions).
P9: Download SuperSu from the Google Play on your device.
SECOND SECTION: steps to rooting device
R1: Set mobile phone device as next:
_____Settings > PC connection > Select USB connection method
_______>> turn on Media sync (MTP).
R2: Connect device to the PC . ..... (You can close AutoPlay windows what will open).
R3: Go to extracted PurpleDrake. .and run 'purpledrake_windows' file. On the black window, what will be opened, in last row will appear ·Press [enter] to continue...· so press a ENTER to start the process.
___
The warning will appear on mobile phone device, accept it and continue the program should appear by itself.
Then program will shows the model number of your LG L50 and there press ENTER to continue with the process.
___
______________< if no progress after ·Waiting for device...· reconect device and try again>
___
The phone will reboot. It is normal.
Press ENTER again to continue, wait for short and finally press ENTER again and the process is done.
_________________________________________________________________________________________
__________________________________________________________That all! Please be patient through the entire process!!
9006..Ritmo said:
.
So this is my second post on XDA.
LG L50 Sporty is also known as LG L50 D213N.
It is not so high level device and so maybe is not of wide interest. But ...
After searching a whole internet I was root it. So other don't have to go through.
Maybe this post will look as long procedure (first view) but actually is not.
There are a couple preliminary steps but just three steps to root.
________________________________________ [I am not native with English language, sorry about that.]
_____________________ Guide: How to root LG L50 Sporty
PRELIMINARY: steps before rooting your mobile
P1: If you have important data on your mobile phone back them up before starting.
The process itself will not erase your data but it is better to have insurance before modifying the system.
P2: Enable USB debugging option on device:
_____Settings > Developer options * > USB debugging >> turn on.
__________* Developer options screen is hidden by default. If this tab does not appear enable it:
____________Settings > About phone > Software information >> tap Build number 5-10 times.
P3: Enable Unknown sources option:
_____Settings > Security > Unknown sources >> turn on.
P4: Enable Stay awake option:
_____Settings > Developer options > Stay awake >> turn on.
P5: The device should have 90% or more of full battery.
P6: All the specific drivers needed to install in the computer should be done before rooting *.
_________* > go to the LG Electronics official site
__________ > type the name and model of your device in the search box,
__________> select your device and click the PRODUCT SUPPORT,
__________> in the support page, click the SOFTWARE UPDATE tab,
__________> download the drivers and install onto to your computer.
P7: Download and install *: 15 seconds ADB Installer - Version 1.3.
__________* 15 seconds ADB Installer you can find here on the forum: http://forum.xda-developers.com/showthread.php?t=2588979;
____________follow Install process instruction given by the author.
P8: Download the PurpleDrake *, extract it and place at the comfortable space on your computer where remember.
__________* PurpleDrake you can find here: http://downloads.codefi.re/thecubed/lg_g3/purpledrake/PurpleDrake-Lite_R03.tar.gz
___________ You need 7-Zip (or similar) to extract tar.gz file ( ... it will be two successive extractions).
P9: Download SuperSu from the Google Play on your device.
SECOND SECTION: steps to rooting device
R1: Set mobile phone device as next:
_____Settings > PC connection > Select USB connection method
_______>> turn on Media sync (MTP).
R2: Connect device to the PC . ..... (You can close AutoPlay windows what will open).
R3: Go to extracted PurpleDrake. .and run 'purpledrake_windows' file. On the black window, what will be opened, in last row will appear ·Press [enter] to continue...· so press a ENTER to start the process.
___
The warning will appear on mobile phone device, accept it and continue the program should appear by itself.
Then program will shows the model number of your LG L50 and there press ENTER to continue with the process.
___
______________< if no progress after ·Waiting for device...· reconect device and try again>
___
The phone will reboot. It is normal.
Press ENTER again to continue, wait for short and finally press ENTER again and the process is done.
_________________________________________________________________________________________
__________________________________________________________That all! Please be patient through the entire process!!
Click to expand...
Click to collapse
hi thank you for this great toturial but my question is will this unlock bootloader for this device.i made cwm recovery and cm12.1 but is the bootloader unlocked with this i dont want to risk too much and hardbrick my phone...
nice thanx
Nice and easy tutorial... Rooted fast and easy
Question: How to unroot the l50 sporty after changes with purple drake ?
Silly me i see i can full unrooted with super su
Also what is the best rom for this device did you put also twarp on it after rooted any tutorial on it.
I have idea to put Android 7.1 ROM | 391.19MB | from link new user cant post link anyone done it ?
I have idea to put new OS Lineage on it to make it usefully again any advice ?
Regards from Cro
Root Checker says: Not Rooted
Hi.
First of all thanks for submiting this post.
I've followed all the steps to root my phone, everything goes as it should be, but when it reboots and I open Root Checker to see if it worked it says my phone is not rooted. I've reseted my phone, rebooted my pc and nothing seems to help. :crying:
Any idea to solve this problem? i would apreciate it.
---------- Post added at 04:32 AM ---------- Previous post was at 04:23 AM ----------
zaam94 said:
Hi.
First of all thanks for submiting this post.
I've followed all the steps to root my phone, everything goes as it should be, but when it reboots and I open Root Checker to see if it worked it says my phone is not rooted. I've reseted my phone, rebooted my pc and nothing seems to help. :crying:
Any idea to solve this problem? i would apreciate it.
Click to expand...
Click to collapse
Here are the Check Details from root checker:
Root Access No Access
SU Su found
UID/GDI uid=10086(u0_a86)
gid=10086(u0_a86)
groups=3003(inet),50086(all_a86)
context=u:r:untrusted_apps:s0
Unix Utils toolbox
Env. Paths /sbin:/vendor/bin:/
system/sbin:/
system/bin:/system/
xbin
SU info
Path /system/xbin/
/system/bin/
Versions 3.61:kinguser_su
Permissions rwxr-xr-x
Owner root:167696
SELinux Enforcing
Requirements;
==>A PC windows 7 preferably
==>Vcomm drivers manually installed on your PC if not installed follow this guide here to install it
==>Miracle box download
==>A USB chord that supports mass storage(that can send files when connected to system)
==>Your brain
Procedures
1. Diasble your antivirus otherwise it will delete miraclebox.exe extract miracle box now open miracle box
2. Click on the MTK tab
3. Click on the Unlock/fix tab
4. Tick the reset code
5. Click the dropdown menu to choose your android chipset type MT***
6. Click on the start button
7. Connect your phone to PC make sure it is switched of now (with the battery inside)
8. press the power button once this will make the phone communicates with the PC do not hold down the power button or else it won't work.
9. Wait till the process is done Disconnect your phone from pc then power it on.
Congratulations you just bypassed your pin, password and pattern unlock
Image tutorials
Hello guys am new here am not able to post links here for the miracle box and vcomm drivers kindly check my signature for it (techfashy.com)
fashrobbin said:
Hello guys am new here am not able to post links here for the miracle box and vcomm drivers kindly check my signature for it (techfashy.com)
Click to expand...
Click to collapse
my moto g4 plus is locked, its neither rooted nor USB debugging is enabled so is your method applicable in any way?
Only point that it is connected to wifi.
Warning: this device
(Build: LW_X325_APR_2017_V2748_01_FINAL
Build fingerprint: 'alps/Z22/Z22:4.4.2/KOT49H/1492164051:user/test-keys')
contains the com.adups.fota and com.data.acquisition malware. Use at your own risk!
Credit: All credit goes to:
yuweng for Easy Magic TWRP Installer for all MediaTek Devices
out386 for [MTK] Rooting a device (kind of) manually
koush for Universal ADB drivers
Chainfire for adbd Insecure
bovirus and rua1 for MTK Droid Root & Tools
Hovatek for [Tutorial] How to manually install MT65xx (MediaTek) USB VCOM drivers on Windows
Alternate download links:
https://mega.nz/#!UAl2HYoR!jUgMi_YkrrQ3CBhjMSCRcZat1QGEhbnOiJ6XjQV8yEw
OR
http://www.mediafire.com/file/a2eqra3fpzxpy88/recovery.img
Pre-setup:
You will need:
Universal ADB drivers
MTK Droid Root & Tools
SP Flash Tool
MediaTek PreLoader USB VCOM: I used this method from Hovatek which works on Windows 7 x64 but I can't vouch for other OS/architectures
Setup Instructions:
1. Install the Universal ADB drivers.
2. With your phone turned on, connect your phone via USB. USB debugging must be enabled and the phone must be connected as Camera (PTP) for any tools to access it.
3. Use MTK Droid Root & Tools to generate a scatter file.
4. Disconnect the USB cable. Turn your phone off and remove the battery. Reconnect the USB cable, keeping the phone turned off.
5. Open SP Flash Tool. Optional but highly recommended: use the Readback tab to backup your current ROM. Root is NOT required for readback backup. Load the scatter file generated in step 3. The download agent should be MTK_AllInOne_DA.bin by default, select it if it isn't.
6. Browse and select the recovery.img if it isn't already. Make sure that ONLY the checkbox to the left of RECOVERY is checked! The dropdown menu should be set to "Download Only", select it if it isn't. Click Download and wait for a green check mark to appear. Now it's safe to disconnect the USB, put the battery back in, start the phone, and reconnect the USB.
7. The fastest way to get to recovery is to boot normally, then open adb and type and enter adb reboot recovery to reboot directly into recovery. Holding volume up + power from the off state works too. Volume down + power enters factory test mode which isn't very interesting.
Notes:
The bootloader is unlocked. It appears that there's no easy way for a non-root user to tell that though, fastboot oem commands will silently hang indefinitely, fastboot getvar all only returns partition names and sizes, stock recovery doesn't show lock status...
All images must be flashed. fastboot boot will silently hang on 'booting...' indefinitely.
fastboot flash can be used to flash boot.img but not recovery.img, some sort of permissions issue
End:
Let me know if I forgot something.
This post appears to be intended to refer to SMT TELECOMM HK LIMITED X325 devices that use Life Wireless (mobile virtual operator) branding (There is also a Social Mobile Telecommunications branded version of X325).
The title refers to the device as "BPX325", but BPX325 is the model code of the battery, not the device.
Thanks for the recovery. It would also be good to state what version of TWRP the recovery is based on.
Ascii3 said:
This post appears to be intended to refer to SMT TELECOMM HK LIMITED X325 devices that use Life Wireless (mobile virtual operator) branding (There is also a Social Mobile Telecommunications branded version of X325).
The title refers to the device as "BPX325", but BPX325 is the model code of the battery, not the device.
Thanks for the recovery. It would also be good to state what version of TWRP the recovery is based on.
Click to expand...
Click to collapse
Oops, fixed. This uses TWRP 2.8.2.0. I only know for sure that it works on my device, maybe this will help determine compatibility?
[ro.mediatek.chip_ver]: [S01]
[ro.mediatek.platform]: [MT6572]
[ro.mediatek.version.branch]: [KK1.MP7]
[ro.mediatek.version.release]: [ALPS.KK1.MP7.V1]
I'm not sure. I'm no Android developer, I learned all this the hard (trial and error) way after finding adups.fota in the system partition and not trusting rooting apps to do the job for me.
In this thread I'll discuss how to unbrick hard bricked LGX150. After accidentally deleting key system app on my phone, I was left with dead device. Let this thread be a guide how to hopefully revive it; from installing fresh firmware to writing its IMEI to be able to connect to your mobile provider.
***Note that I'm am not responsible for any possible further damage you do to your phone! This method has worked on my phone. That's the only device I'm certain it works on. Furthermore, this firmware is only for LG Bello 2 (LGX150), so in no way try to use it on any device other than one mentioned!***
Tools you are going to need are linked at the bottom.
Before we even start, you'll need to disable driver signature enforcement. Note that I'm using Windows 10. To do that, follow this simple guide. I'll be waiting...
Disabled? Great. Now, we are going to install MediaTek drivers. Open Device Manager and select to add legacy hardware in the action drop menu. We want to install it manually, so choose that option.
After clicking on next and "have disc", find the extracted driver folder location you've previously downloaded and choose:
MTK_Driver_ext>SP_Drivers_v1.6>cdc-acm.inf.
Select MediaTek DA USB VCOM. The prompt box will open where you'll click on "install anyway". Now, plug your phone in and right click on it in Device Manager. Choose "Update driver" and in the following list install driver MediaTek DA USB VCOM under MediaTek. That's it. You we have successfully installed the driver. Your phone should be listed in ports as "MediaTek DA USB VCOM (Port X)".
Awesome. Now for the more interesting part.
Download "SP tool.7z" and "LGX150-00-PIN-EUR-XXX-JUL-15-2015+0.user_3.zip", and extract them.
Run SP tool as an administrator, and in the download tab choose "MT6582_Android_scatter.txt" as an Scatter-loading file. If everything is okay, loaded files should now fill previously empty box. Okay, great! The moment of truth has come.
Press download button and reinsert your phone. Don't touch any button, either on the phone or computer. The bar at bottom should now change in color and flashing procedure should take place. Leave the room and return momentarily. Pray if religious.
Everything went smooth? The big green "okay" window has shown? If no, try different version of SP tools. If yes, remove the cable from phone, and battery as well. Wait for 15 seconds and reinsert it. Try to power the phone on.
Congratulations. For the next part, we'll rewrite its IMEI since it has been deleted, but more on that in a few days. You may want to check the post on how to root it here.
Credits go to the member on panduoduo.net named Ari*****e123, but I'm not sure whether the stars are because it's hidden or it is for real. Anyways, this is the link of the member. I can't thank her/him enough because this is the only firmware that actually worked, and we know how scarce options are for LGX150. If someone could show me how to donate to her/him, if possible, I'll gladly do so. Thank you, Ari*****e123.
Also, MediaTek developers for developing many, many great tools absolutely free of charge.
downloads:
MediaTek drivers
SP Tool
Firmware
Works perfectly, thanks. Could not find lg x150 firmware except here. Had to use similar firmware of x155 or x160.
Only found billions of links where people try to sell it for few bucks and offering file that requires password, but nowhere for free. Even that chinese you mentioned disappeared together with website. I am lucky to have found this thread.
The cause of my broken lg x150 was option in lucky patcher to remove all odex files, which broken all system apps, because they are special apps which unlike other apps do not have apk file with dex inside.
Just few observations:
- have to use spflashtool v5.1828 (5.1532 and 5.2036 do not work with this firmware)
- can root with kingoroot
- can replace root with supersu as in this guide https://forum.xda-developers.com/android/software-hacking/replace-kingoroot-supersu-manually-t3573361
- xposed framework works. just beware installing xposed after having some apps dex files linked via apps2sd will cause such apps to break, in that case just relink dex
- apps2sd works (except making ext4 primary 2nd partition on sd card, also enable su during boot and compatible namespace separation in supersu options, and enable addition of boot scripts before and after mount in apps2sd options and add this before:
Code:
su
setenforce 0
the new line after line setenforce 0 is vital for it to work properly, have to press enter key (new line) so that cursor is in new line, can check after reboot in terminal type getenforce and if it says permissive means that worked)
- can change imei via mtk engineering mode either via some apps or via code *#*#4636#*#* - cds information - radio information
- can't use uny custom recovery, boot, root, kitchen
- there are many guides for this in hovatek forum and in androidmtk website
- spflashtool 5.1532 is last version to work with nonencrypted flash files, so anybody may use that for readback (backup) of partitions and restore, for example I backed up rooted partitions, so no need to reroot or connect to internet for that ever again, no need to redo kingoroot rooting, just beware in start address you enter linear start address and partition size, not physical start address from scatter file! if system partition after readback can open via 7-zip means it is ok
- damaging imei, mac, calibration may require additional tools, but this can only happen if you format something via spflashtool or manually edit scatter file, so avoid that, see my problems: https://forum.hovatek.com/thread-21408.html