Hello Guys. I have a little problem with my leo. I downloaded many ROMs for my Xperia Z3 but for some time i stuck on bootloop after flash. It happened after flash RXSW Marshmallow Edition. This is the only one ROM which is working on my device. I tried to erase/wipe partition, resize etc. in twrp but its not working. Any idea how to flash other custom ROM?
Related
hi i recently flashed a cm10.1 rom on my huawei ascend y300, but i faced a lot off bugs in this rom, then i decided to flash my stock rom, but when i booted in TWRP the touch was not working, i heard that twrp doesn't support cyanogen mod, then i flashed a clockwork mod recovery, and now when i try to boot in cwm my phone turns off, i am sick of this situation, tried lots of ways but no one worked, anyone have an idea how to solve it ?
thanks in advance
Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
muqy said:
Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
Click to expand...
Click to collapse
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
chairsz said:
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
Click to expand...
Click to collapse
Hey man, worked a charm thanks!
For users who may have the same problem:
After flashing 4.3 onto the device it did NOT boot.
- However I then went into the bootloader flashed custom recovery, I used cwm.
- Then I went into recovery, used adb to push the rom and gapps onto sdcard
- Full wipe and then installed rom. Then installed gapps
Working fine.
Cheers chairsz :good::good:
Hello everyone,
I am a beginner and just recently i managed to flash Cyanogenmod 10 in my Sony Xperia S (LT26i). But, I would like to test more custom ROMS in my phone (for example existenz v.1 or v.2). In order to do that, do I have to repeat the procedure from the begining each time (booting img file, and the the ROM and then the appropriate gapps zip in recovery mode)?
Is there a guide or guidline for flashing roms in general?
Thank you very much for your time.
sterg.chr said:
Hello everyone,
I am a beginner and just recently i managed to flash Cyanogenmod 10 in my Sony Xperia S (LT26i). But, I would like to test more custom ROMS in my phone (for example existenz v.1 or v.2). In order to do that, do I have to repeat the procedure from the begining each time (booting img file, and the the ROM and then the appropriate gapps zip in recovery mode)?
Is there a guide or guidline for flashing roms in general?
Thank you very much for your time.
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
If you managed to flash the ROM in that way then that procedure will be the same also for the other custom ROMs for your device.
Regards
I tried a cm12.1 rom which used to get flashed perfectly without any issues earlier. Then i encountered some problems with the ROM and i decided to flash the stock international kitkat rom(yes, i followed the correct procedure from the guide by @codelover). I didn't unlock the bootloader nor root it nor flashed a custom recovery.
For the past few day's i've been trying to install the same cm 12.1 rom and some new cm12.1 roms(updated versions, here is the link:https://userscloud.com/go/kgu385awbw9z/) but without any luck. After flashing either of the roms, the phone boots up fine till the stage where it shows the static honor logo(non-animated one) but after that it just shows a black screen and just stays there.
If i reflash stock B115, B108-signed 4.2.2 roms and B320 kitkat rom, it happens perfectly. But if i flash any other roms (after unlocking the bootloader and flashing custom recovery by following the guide), the black screen problem pops up(which didn't used to happen earlier). AGAIN i have tried the older cm12.1 ROM whose zip file has been stored on the sd card since that day without any modifications, so there's no chance of the ROM being tampered with.
I have tried hard resetting it by deleting emmc partitions and then reflashing the stock roms, but still the problem pertains after flashing the custom roms.
Does anyone know where i might be going wrong or what the problem is?
I wanted to install cutom rom in my Mi4i working on MIUI 8, so I installed TWRP from toolkit , which also installed SuperSU.But I don't know if my bootloader was unlocked or not?
I saw in a youtube video to flash MIUI 6 first to install Custom rom or you might endup in BOOTLOOP.
In TWRP I wiped Dalvik,Data,Cache,System.
Went to INSTALL, tried installing MIUI6 but that package failed to install. Giving error unable to mount.
I tried custom rom crDroid and it installed but when I restarted I WAS STUCK IN BOOTLOOP.
After a heartattack I finally flashed MIUI8 with MiFLASHER using fastboot image of MIUI 8.
SO, I want to ask IS THERE A WAY TO INSTALL CUSTOM ROM ,IF I AM ON MIUI 8????
And that bootloop was caused beacuse I didn't unlock bootloader when I installed crDroid???
Thanx in advance. Please somebody help???
singharpit800 said:
I wanted to install cutom rom in my Mi4i working on MIUI 8, so I installed TWRP from toolkit , which also installed SuperSU.But I don't know if my bootloader was unlocked or not?
I saw in a youtube video to flash MIUI 6 first to install Custom rom or you might endup in BOOTLOOP.
In TWRP I wiped Dalvik,Data,Cache,System.
Went to INSTALL, tried installing MIUI6 but that package failed to install. Giving error unable to mount.
I tried custom rom crDroid and it installed but when I restarted I WAS STUCK IN BOOTLOOP.
After a heartattack I finally flashed MIUI8 with MiFLASHER using fastboot image of MIUI 8.
SO, I want to ask IS THERE A WAY TO INSTALL CUSTOM ROM ,IF I AM ON MIUI 8????
And that bootloop was caused beacuse I didn't unlock bootloader when I installed crDroid???
Thanx in advance. Please somebody help???
Click to expand...
Click to collapse
I would suggest you to install Resurrection Remix as it is based on miui8 firmware.
You were stuck in bootloop because crDroid was based on miui6 firmware and probably your installation of the same was failed ( Like you're saying )
Since you get "Heart Attack", Prefer clean install.
Wipe system, data, cache, dalvik cache.
Flash Rom, gapps,
Reboot to system.
Note:- To install custom ROMs based on miui6 firmware, first of all, flash the provided firmware in the thread instead of flashing the whole miui6.
Ask further if it doesn't work.
Hit thanks if helped.