I am using a JBL headset with single button to answer calls. The problem is the button is functional for roughly 15 seconds after plugging in and does nothing after that.I can play/skip music in this time span only.The buttons works once again if I replug it.The headset works normally in other phones.Currenly I am in nougat.The problem is persistent since marshmallow..Thanks in advance
Maybe try turning on the smart headset controls in settings? Just an assumption though
Tried already.didnt help.Does anyone else has the same problem.BTW thanks for spending your time...
Related
hi,
i have recently purchased the chamelon headset for my tmobile mda2(himalaya). with the help of bluetooth tools for pocket pc i have been able to bond the 2 devices successfully and have achieved a fair working state between both devices. however there is one problem that cannot be avoided. it seems like the volume output on the headset is very low, its very difficult to hear anyone on the other end. the manual states that while in call you can turn up the volume until you hear a beep to indicate the volume is at its highest setting. despite numerous attempts at trying to get the volume higher i have not had any success. while in call i try to press either buttons and there is no change in volume. i have heard a beep a few times after 20-30 consecutive presses but i didnt notice much or if any change in volume. is there anyway to adjust the volume on the headset while not in a call? im not sure whether this may be a problem with the chameleon or perhaps a problems with the bluetooth in the microsoft OS?
Anyone else experience problems like this?
Maybe the Chameleon suffers from the same feature as my BTH-808 headset: When I use it in my right ear the volume-down button (on the side of the headset) is likely to press on my ear and thus . . . .minimizes the volume.
Work-around: use in left ear or ut in with care.
Same behaviour as you describe in changing volume. You have to press the volume-up button approx once every 1-2 seconds for the volume to go up one step.
Took me a week to find out what happened . . .
sigh. i wish it was that simple.
it seems like i have got the headset to its highest volume and it still sounds very weak. nextlink support tells me the volume on the bluespoon is generally very loud.
man... the BT on this machine is really a nightmare.
have you tried to put volume higher like I mentioned. When I press the volume-up to quick, It simply stays low, although I hear the 'volume-up beep'!!
Otherwise: Back for warranty I guess
Here's another odd little niggly thing I've found about my Touch Pro.
I normally have the volume at about 90% all the time. When I get in my truck and the phone automatically connects to my bluetooth stereo, the volume on the phone suddenly changes to mute. I then have to up the volume back to it's normal level.
The volume will stay put from then on, even after disconnecting and reconnecting the A2DP....
...except.....
...if I have to reboot the phone for some reason. After the reboot, the first time it connects to the bluetooth stereo it mutes again.
Any ideas why this is happening?
-=Zzedly=-
zzedly said:
Here's another odd little niggly thing I've found about my Touch Pro.
I normally have the volume at about 90% all the time. When I get in my truck and the phone automatically connects to my bluetooth stereo, the volume on the phone suddenly changes to mute. I then have to up the volume back to it's normal level.
The volume will stay put from then on, even after disconnecting and reconnecting the A2DP....
...except.....
...if I have to reboot the phone for some reason. After the reboot, the first time it connects to the bluetooth stereo it mutes again.
Any ideas why this is happening?
-=Zzedly=-
Click to expand...
Click to collapse
Same problem with my elife e8
First off, I apologize if this has been covered elsewhere.
I have a Lexus CT200H and when I have the phone connected to the internal phone/audio I can hardly hear person on the other end of the line regardless of how high I have the volume turned up on the car or the phone.
Any ideas?
troutbeck27 said:
First off, I apologize if this has been covered elsewhere.
I have a Lexus CT200H and when I have the phone connected to the internal phone/audio I can hardly hear person on the other end of the line regardless of how high I have the volume turned up on the car or the phone.
Any ideas?
Click to expand...
Click to collapse
Similar issue with my 2012 Mazda 3. I can't change the in-call volume on my phone (Verizon Galaxy S3). So I have to turn the volume all the way up on the Mazda BT to (barely) hear the call.
I'm using the volume buttons, and on the phone screen it shows the BT volume icon and slider going all the way up, but the volume thru the Mazda is unchanged.
Same thing occurs with my wife's HTC Incredible 2. I adjust the BT in-call volume up and down, but there is no effect on the actual volume.
Both phones ARE able to adjust the BT in-call volume on a BlueAnt ST3 unit, so I know the phones are OK.
Surprisingly, for music streaming, I *am* able to adjust the music volume on the phone. But not the in-call volume.
So troutbeck27, when using the volume keys, do you see the BT icon next to the volume slider? Do you hear ANY difference between a low/high volume setting on your phone? And are you able to change your media streaming volume on your phone?
Anyone else have this issue with the in-call BT volume being non-adjustable?
Install the app called "Volume+" to boost the volume of the bluetooth device.
had the same issue and the work around is to turn off the headset button on the phone and turn it back on. That will fix the problem.
topaz330 said:
had the same issue and the work around is to turn off the headset button on the phone and turn it back on. That will fix the problem.
Click to expand...
Click to collapse
I tried:
-turning off bluetooth (at the system level) and turning it back on
-turning off/on bluetooth during the call (i.e., switching from car BT to handset and back again)
Neither of those resulted in allowing volume adjustments...did I understand your suggestion correctly?
Thanks.
I'm having similar bluetooth volume issues, my head unit is the DEH-P9400BH.
Running Cyanogenmod10-nightly.
The phone will output to its speaker, or headphones just fine, but the moment I pair it to my car's had unit, and bluetooth takes over, the audio is much quieter. Specifically the bass signals don't appear to be passed from phone to car.
I've tried unpairing from the phone, from the car, deleting the profiles of the car from phone and phone from car. I've tried unpairing while bluetooth was in use playing music. Tried lowering the volume levels and raising them again (as that seemed to work once before).
I have a feeling that the phone's master volume setting is set lower when bluetooth connects, and I'm find a hard time finding that control, as the volume key controls the bluetooth volume settings while bluetooth is activated.
Any ideas?
Thanks for reading!
Edit: bluetooth audio has worked before without too many problems. This is a recent thing, maybe a week old.
TonyXL said:
I tried:
-turning off bluetooth (at the system level) and turning it back on
-turning off/on bluetooth during the call (i.e., switching from car BT to handset and back again)
Neither of those resulted in allowing volume adjustments...did I understand your suggestion correctly?
Thanks.
Click to expand...
Click to collapse
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Anyone know how to turn off the notification sound through the speakers when a headset is plugged in? Looked throught the usual setting and nothing jumped out. Thanks.
answer
Press and hold the power\lock button to mute everything except the media sound after plugging in your headset. All of the sound settings will return to your previous settings when you unplug your headset.
This appears to be an Android bug and others are also using "SoundAbout" from the play store to work around this issue of automatically muting the external speaker when you plug in your headset.
Hi guys,
I noticed a week ago that while listening to a WhatsApp voice message I was unable to change the volume using the volume rocker.
I thought this very strange. Then while in the car listening to a podcast via Bluetooth I noticed the audio would stop, then maybe 5 minutes later start again by itself, then stop again (sometimes for ages) then start again.
I've now noticed that the audio was switching to in call volume ( active and green) during the times the audio stopped. As soon as it decided I wasn't on a call it would then default back to media volume and things would start playing again.
So my bloody phone thinks either a call is coming through or I'm on a call yet neither of these things are true.
Very very very frustrating!
Has anybody experienced this? What could this be and how can it be fixed?
Thanks
Bump
homerlovesbeer said:
Bump
Click to expand...
Click to collapse
I am still not able to understand your issue clearly but could it be bad proximity sensor?
Thanks for replying.
My phone has "in call volume" active sometimes even though not on a call. When you press the volume rocker on the side it is active (highlighted in blue) when it shouldn't be.
When active it cuts out all other media.
Then sometimes it's normal where in call volume not showing (not active) when you press the volume rocker so I can play media, (media volume shows active when pressing volume rocker) just the way it should be.
It's totally random.
I'd that clearer?
Thanks!
homerlovesbeer said:
Thanks for replying.
My phone has "in call volume" active sometimes even though not on a call. When you press the volume rocker on the side it is active (highlighted in blue) when it shouldn't be.
When active it cuts out all other media.
Then sometimes it's normal where in call volume not showing (not active) when you press the volume rocker so I can play media, (media volume shows active when pressing volume rocker) just the way it should be.
It's totally random.
I'd that clearer?
Thanks!
Click to expand...
Click to collapse
Do you have smart connect installed? In past I have experience something similar while using smart connect.
Like sometime it acts as if headphone is connected when it's not and you don't hear anything when you play media.
I haven't, and I don't know what smart connect is but my issue isn't it thinking headphone connected, it thinks it's on a phone call