Database Info

Android 6.0 CM 13 Marshmallow! Rom for Lenovo A6000

Yet another custom rom with the latest Android Operating System Marshmallow for Lenovo A6000 and Plus users. It
is unnoffcial but it comprises the latest updates of Marshmallow and CM 13. The custom rom is still under beta phase testing and there might be lots of bugs and instability. We would advice you to flash this custom rom if you’re not using as the primary device. You
can test the features of Marshmallow on your Lenovo A6000 but there might be errors or performance issues. The Lenovo A6000 CM 13 Marshmallow ROM is only 400 MB and it needs to be installed on a Lollipop based rom already with the TWRP custom recovery.
DISCLAIMER : Rooting or flashing custom roms results breaking the warranty of the device. Techolaty and its authors are not responsible for any damage which is incurred in the process of flashing custom roms or rooting the device. We highly advice to take a backup of your device prior to performing the process.
Pre-Requisites
Lollipop pre-installed
TWRP Custom Recovery – Read the guide from here
http://www.techolaty.com/install-twrp-recovery-on-lenovo-a6000-lollipop/
Lenovo A6000 CM 13 Marshmallow ROM – Download it from here
https://drive.google.com/file/d/0B3az2bvjmHEyeXhSS3BTcGtnaTg/view
GApps 5.1.x – Download it from here
http://www.mediafire.com/?1fjikny9l32an9m
About The Rom
Android Verion : 6.0
ROM Version : 1.0 Beta
Type : Cyanogenmod 13
Author/Credits : FlourMo
Features
Google Now on Tap
App permissions
Battery optimisation
Most used apps
Doze
Automatic backup and restore
Manage volumes more intuitively
Select text more accurately
Also check - Lenovo A6000 AOSP 5.1 Custom ROM
How to Install
Step 1 : Copy the CM 13 Marshmallow ROM and GApps in your SD card
Step 2 : Boot into Recovery
Switch off your device
Now press Volume Down + Power Button together for 2-5 seconds until you see the bootloader
Connect the USB to your PC/Laptop and then flash TWRP recovery (read the guide here)
Step 3 : Make full wipe including “system” (data, dalvik, system, cache)
Step 4 : Now go back and click install and then click one level up
Step 5 : Flash the ROM
Step 6 : Reboot (the first boot can take up to 2-5 minutes)
Bugs
FM not working
GPS Positioning not accurate

sourav8434 said:
Yet another custom rom with the latest Android Operating System Marshmallow for Lenovo A6000 and Plus users. It
is unnoffcial but it comprises the latest updates of Marshmallow and CM 13. The custom rom is still under beta phase testing and there might be lots of bugs and instability. We would advice you to flash this custom rom if you’re not using as the primary device. You
can test the features of Marshmallow on your Lenovo A6000 but there might be errors or performance issues. The Lenovo A6000 CM 13 Marshmallow ROM is only 400 MB and it needs to be installed on a Lollipop based rom already with the TWRP custom recovery.
DISCLAIMER : Rooting or flashing custom roms results breaking the warranty of the device. Techolaty and its authors are not responsible for any damage which is incurred in the process of flashing custom roms or rooting the device. We highly advice to take a backup of your device prior to performing the process.
Pre-Requisites
Lollipop pre-installed
TWRP Custom Recovery – Read the guide from here
http://www.techolaty.com/install-twrp-recovery-on-lenovo-a6000-lollipop/
Lenovo A6000 CM 13 Marshmallow ROM – Download it from here
https://drive.google.com/file/d/0B3az2bvjmHEyeXhSS3BTcGtnaTg/view
GApps 5.1.x – Download it from here
http://www.mediafire.com/?1fjikny9l32an9m
About The Rom
Android Verion : 6.0
ROM Version : 1.0 Beta
Type : Cyanogenmod 13
Author/Credits : FlourMo
Features
Google Now on Tap
App permissions
Battery optimisation
Most used apps
Doze
Automatic backup and restore
Manage volumes more intuitively
Select text more accurately
Also check - Lenovo A6000 AOSP 5.1 Custom ROM
How to Install
Step 1 : Copy the CM 13 Marshmallow ROM and GApps in your SD card
Step 2 : Boot into Recovery
Switch off your device
Now press Volume Down + Power Button together for 2-5 seconds until you see the bootloader
Connect the USB to your PC/Laptop and then flash TWRP recovery (read the guide here)
Step 3 : Make full wipe including “system” (data, dalvik, system, cache)
Step 4 : Now go back and click install and then click one level up
Step 5 : Flash the ROM
Step 6 : Reboot (the first boot can take up to 2-5 minutes)
Bugs
FM not working
GPS Positioning not accurate
Click to expand...
Click to collapse
screenshots plz

I am looking for one.. Thanks for posting.. I really like Flourmo ROMs
Sent from my Lenovo K30-T using Tapatalk

Anybody managed to flash cm13 in 6k+
Sent from my Lenovo using XDA Free mobile app

Yep. I donno if its my prob or os. the phone keeps rebooting after installing this os. so proceed with caution.

Its in beta version may have several bugs. Is it rebooting automatically? Hows the batery backup
Sent from my Lenovo using XDA Free mobile app

I suggest No One to try this CM 13 ROM..I have tried to install it multiple times & Everytime my A6000 was stuck at bootloop...
I was using Mokee ROM (Lollipo 5.1.1) & wiped Dalvik,Cache,System & data & installed Cm 13 & gapps 5.1.1 successfully..But When I boot up,it is stuck at Lenovo Logo Screen (Bootscreen) .I have waited for more than 15 minutes to bootup ,but it didn't happen..
So I request you to proceed with caution & do not install it..Wait for the second version or other marshmallow ROMs

averagegeek said:
I suggest No One to try this CM 13 ROM..I have tried to install it multiple times & Everytime my A6000 was stuck at bootloop...
I was using Mokee ROM (Lollipo 5.1.1) & wiped Dalvik,Cache,System & data & installed Cm 13 & gapps 5.1.1 successfully..But When I boot up,it is stuck at Lenovo Logo Screen (Bootscreen) .I have waited for more than 15 minutes to bootup ,but it didn't happen..
So I request you to proceed with caution & do not install it..Wait for the second version or other marshmallow ROMs
Click to expand...
Click to collapse
See the update-script it doesnt even flash the rom. i will update the proper update script later. try and u ll get it boot up

rahulsnair said:
See the update-script it doesnt even flash the rom. i will update the proper update script later. try and u ll get it boot up
Click to expand...
Click to collapse
After trying the Cm13 Rom with no luck,I have restored the TWRP backup of my previous ROM..After REBOOT,the Screen doesn't turn ON & the Phone keeps vibrating ..Does my phone turn into a Hard Brick?
Can You help?

averagegeek said:
After trying the Cm13 Rom with no luck,I have restored the TWRP backup of my previous ROM..After REBOOT,the Screen doesn't turn ON & the Phone keeps vibrating ..Does my phone turn into a Hard Brick?
Can You help?
Click to expand...
Click to collapse
is your phone detected by system if you connect to pc?

averagegeek said:
After trying the Cm13 Rom with no luck,I have restored the TWRP backup of my previous ROM..After REBOOT,the Screen doesn't turn ON & the Phone keeps vibrating ..Does my phone turn into a Hard Brick?
Can You help?
Click to expand...
Click to collapse
Flash the stock lollipop firmware which was 1 gb in size from Twrp. Just copy it into your Sd and flash it directly.

averagegeek said:
After trying the Cm13 Rom with no luck,I have restored the TWRP backup of my previous ROM..After REBOOT,the Screen doesn't turn ON & the Phone keeps vibrating ..Does my phone turn into a Hard Brick?
Can You help?
Click to expand...
Click to collapse
are you able to fastboot !! or get into reccovery!!

abhifx said:
is your phone detected by system if you connect to pc?
Click to expand...
Click to collapse
No...It keeps on vibrating when connected to PC or Power Adapter with Nothing on Display ..I have manually remove the battery to stop the Vibration
---------- Post added at 11:07 AM ---------- Previous post was at 11:05 AM ----------
zeon321 said:
Flash the stock lollipop firmware which was 1 gb in size from Twrp. Just copy it into your Sd and flash it directly.
Click to expand...
Click to collapse
My Phone doesn't get detected in my PC..Fastboot is not working...Display is not Powering On..Then how am I supposed to flash the Stock Firmware?
---------- Post added at 11:10 AM ---------- Previous post was at 11:07 AM ----------
rahulsnair said:
are you able to fastboot !! or get into reccovery!!
Click to expand...
Click to collapse
Nope...It keeps on vibrating..No fastboot...No Display...No connection with my PC....

Did you tried the volume up+ powerbutton combination to enter onto boot loader
Sent from my Lenovo using XDA Free mobile app

ajithvs126 said:
Did you tried the volume up+ powerbutton combination to enter onto boot loader
Sent from my Lenovo using XDA Free mobile app
Click to expand...
Click to collapse
Yup..No response ..It keeps vibrating

No lenovo logo..?
Sry bro i dont know what to do unless getting it into the bootloader
Sent from my Lenovo using XDA Free mobile app

You guys need to flash the stock lollipop, then flash CM12.1 and then CM 13. Worked for me. Try it yourself.

For few days ,I have tried to unbrick my A6000 with No Luck.So I have to visit the Service Center & they replaced the Motherboard to fix my phone.I doubt a "wrong boot partition Restore" have caused the issue.What's your thoughts on that?

VeerAmrit said:
You guys need to flash the stock lollipop, then flash CM12.1 and then CM 13. Worked for me. Try it yourself.
Click to expand...
Click to collapse
screen shots plz...

vardhan21 said:
screen shots plz...
Click to expand...
Click to collapse
Check the video instead - https://www.youtube.com/watch?v=7Uzwi3jsmE0

[ROM] MIUI 8 Global 6.9.29 | Beta - Redmi Note 3 (MTK - Ported - Goodix FP working)

Ported Global ROM for Redmi Note 3 (MTK)
(miui_HMNote3Global_6.9.29)
P.S.: This is my own project of MIUI Global ROM for Redmi Note 3 MTK! This is a official ROM without any modifications!
Features:
*All Global languages and features of MIUI 8 Global (No Chinese patched ROM)
*Same version of MIUI 8 Global for Redmi Note 3 (Snapdragon) with all features (Still on Android 5.0.2)
*Odexed ROM
*This is a real Global ROM since first boot for your Redmi Note 3 (MTK)! =)
*Support for Goodix Fingerprint sensor
*No OTA. All updates are provided here.
INSTALL VIA SP-Flash-Tool (Locked Bootloader)
Open folder SP-FLASH-TOOL-V.5.1532.00
Run flash_tool.exe as administrator
Select download agent (DA_SWSEC.bin)
Select scatter in "images"
UNCHECK PRELOADER
BE SURE that only is checked this three files: "system" "userdata" "boot" (Don't check "userdata" if you are upgrading from previous ported Beta ROM. Check "userdata" ONLY IF YOU WANT TO DO A CLEAN INSTALL! DO A FULL BACKUP OF YOUR INTERNAL STORAGE BEFORE IT!!!)
Press download
Turn off mobile phone
Press vol- and conect to your pc with original cable
When red bar apear, wait 5 secs and unpress vol- (see yellow bar in 9-12 secs)
Wait to 100% (yellow bar)
Disconect mobile phone of your pc
Reboot, wait a moment and voila!
INSTALL VIA TWRP (Unlocked Bootloader)
HOW TO UNLOCK YOUR BOOTLOADER
http://en.miui.com/thread-202290-1-1.html
HOW TO INSTALL TWRP
http://en.miui.com/thread-225375-1-1.html
HOW TO INSTALL (TWRP)
First Install
After unlock your bootloader and flash TWRP, like another custom ROM, copy Full ROM to Internal Storage, boot on TWRP, wipe System, Data and Caches, flash ROM, reboot, wait a moment and voila!
Upgrade from previous ported Beta ROM
Copy Full ROM to Internal Storage, boot on TWRP, flash Full ROM without any wipes, reboot, wait a moment and voila!
IMPORTANT: ON FIRST INSTALL, TO GET GLOBAL LOCALES ON SP-FLASH-TOOL VERSION, YOU NEED TO FLASH USERDATA AND THIS WILL WIPE YOUR INTERNAL STORAGE! DO A FULL BACKUP BEFORE INSTALL!
FOR FIRST TIME ON ROM, CLEAN INSTALL IS HIGHLY RECOMMENDED!
After install and use it, please, share your experience here! =D
DOWNLOAD
SP-Flash-Tool Version: https://www.androidfilehost.com/?fid=457095661767098749
TWRP Version: https://www.androidfilehost.com/?fid=529152257862664731
SCREENSHOTS:

DOWNLOAD OF OLDERS RELEASES
6.4.28 SP-Flash-Tool Version: https://www.androidfilehost.com/?fid=24539867161559189
6.4.28 TWRP Version: https://www.androidfilehost.com/?fid=24539867161559185
6.7.5 SP-Flash-Tool Version: https://www.androidfilehost.com/?fid=24588232905721272
6.7.5 TWRP Version: https://www.androidfilehost.com/?fid=24588212152305147

Please update your rom with latest developer rom

Good work. Thanks

Stable, fast and good battery life. Thanks.

M4rs08 said:
Please update your rom with latest developer rom
Click to expand...
Click to collapse
Latest Global Dev ROM is 6.4.28 my friend!
Next Global Dev Release coming in next week as you can see here >>> http://en.miui.com/thread-283273-1-1.html

thanks bro
Sent from my Redmi Note 3 using Tapatalk

OP updated with 6.5.12 Global Dev Release

andersonaragao said:
OP updated with 6.5.12 Global Dev Release
Click to expand...
Click to collapse
Thanks bro, best rom for my RN3

gonna give this rom i try, ill come back with some feed back
between, just seen we got a separate forum for our beloveds redmi note 3, about time... but better late than never

Some devices with 6.5.12 Global Dev ROM has a issue that don't pass from MI account. To bypass it, flash 6.4.28 (download on second post), setup it, then upgrade to 6.5.12 or wait for next Global Dev Release.

is there any way to update to new version without overwriting everything with locked bootloader? im still new to xiaomi flashing
my thoughts so far:
1) first run takes forever to show something other than loading screen, don't panic
2) indeed, you can't login to xiaomi account with 6.5.12 - you will get error loop cycle. repeat very-quick-tap on the "retry" button and you will skip this thing. you cannot login to xiaomi later anyway. im gonna try 6.4.28 while i'm waiting for bootloader unlocking approval :|

[QRCODE][/QRCODE]
andersonaragao said:
Some devices with 6.5.12 Global Dev ROM has a issue that don't pass from MI account. To bypass it, flash 6.4.28 (download on second post), setup it, then upgrade to 6.5.12 or wait for next Global Dev Release.
Click to expand...
Click to collapse
Hi, your Global ROM is a life savior! by the way, how do I upgrade to 6.5.12 from 6.4.28? I did it through the SP Flash method? Thanks in advance.

Thank you... have been trying since 20th Dec 2015. Finally found your solution (which worked).
I didn't realise that Qualcomm was Snapdragon and that I had a MediaTek.
My Redmi Note 3, which came with a hacked English version of software v7.00.99 on release day straight from China and therefore could not update OTA or via other means.
Just to clarify part of the instructions above (this worked with my phone):
Turn phone off, do not connect usb cable to phone.
Press the power button and down volume button together (do not release until end).
After the phone boots to fastrecover, connect the usb cable to phone (do not release both buttons, this can be difficult with one pair of hands).
Continue to hold both buttons until Red bar turns 100% Yellow.
Release both buttons, disconnect usb cable.
Now reboot phone.
Now I can enjoy my Christmas present.
Thank you so much.

Root?
How to root this rom??Thanks before

jockyvmc said:
How to root this rom??Thanks before
Click to expand...
Click to collapse
This worked for me:
h**p://en.miui.com/thread-225204-1-1.html

Updated to MIUI 8 6.7.5 Global guys! Enjoy!

Nice, been waiting for your global rom

It must be rooted or not?

Gerrywiradinata said:
It must be rooted or not?
Click to expand...
Click to collapse
not

Question about Fastboot + Miflash + Unlocked Bootloader using unofficial method!

Hello everyone!
I bought a mi 4c from gearbest which came with a custom\unofficial possibly full bloatware rom, because of this i decided to install the last version of miui for mi 4c from xiaomi.eu! To do this i had to unlock my bootloader, yes my bootloader was looked because before i thought about xiaomi.eu rom, i had installed the lastest stable chinese rom by using the rom updater which i think that it looked the bootloader when i did this. I don't know if the bootloader was looked or not while i had that custom rom on the phone because i did not check it.
So my bootloader was looked and i wanted to install TWR to install the xiaomi.eu rom because of the international support and because of google services and play store which i had tried to install in the chinese stable rom but i had failed miserably to do so! So i want to install TWR but i did not want to wait for the sms with the code to unlock my phone because i had read people complaining that the code takes a long time to arrive and etc! So to solve my problem i used this unofficial way to unlock my bootloader -> http://en.miui.com/thread-247961-1-1.html <- which worked and i got my bootloader unlock, installed TWR and the lasted xiaomi.eu rom for mi 4c
/\ I regret using the unofficial method to unlock my phone, because two days later o got the sms with the code Haste is the enemy of perfection!
But now i want to go back to stable chinese rom because my phone is overheating and throttling a lot and also the GPS works really bad which it did not on the chinese rom!
Now for the doubts:
1 - If i use Fastboot + Miflash to flash the last stable chinese rom, is there the risk of bricking my phone? Because of the way i had unlocked my bootloader i mean?
2 - Is there way to lock the bootloader again, so i can unlock it the right way? I mean using mi unlock and the code that i've received? It will make any difference using the official way in relation to the unofficial way, it will be worth it i mean?

1. only risk is you have a power blackout
2. you can, fastboot oem lock

Hi! Please I really need your experience
I will receive my new Mi 4c with the Bootloader Unlocked from the re seller , Rooted and with Multi language ROM.
Do I have to unlock the bootloader with the official method (which means flashing Cina Dev ROM -to re lock the bootloader- and go on with the Xiaomi's code procedure..) or it is possible to get all things done as soon I get my device by choosing an unofficial weekly miui.eu international ROM and install it normally from the Updater app but also be able to update it every week via Updater without issues?
My problem with flashing is that I don't have my laptop and the one I have now runs win xp.

não-soi-jo said:
Hello everyone!
I bought a mi 4c from gearbest which came with a custom\unofficial possibly full bloatware rom, because of this i decided to install the last version of miui for mi 4c from xiaomi.eu! To do this i had to unlock my bootloader, yes my bootloader was looked because before i thought about xiaomi.eu rom, i had installed the lastest stable chinese rom by using the rom updater which i think that it looked the bootloader when i did this. I don't know if the bootloader was looked or not while i had that custom rom on the phone because i did not check it.
So my bootloader was looked and i wanted to install TWR to install the xiaomi.eu rom because of the international support and because of google services and play store which i had tried to install in the chinese stable rom but i had failed miserably to do so! So i want to install TWR but i did not want to wait for the sms with the code to unlock my phone because i had read people complaining that the code takes a long time to arrive and etc! So to solve my problem i used this unofficial way to unlock my bootloader -> http://en.miui.com/thread-247961-1-1.html <- which worked and i got my bootloader unlock, installed TWR and the lasted xiaomi.eu rom for mi 4c
/\ I regret using the unofficial method to unlock my phone, because two days later o got the sms with the code Haste is the enemy of perfection!
But now i want to go back to stable chinese rom because my phone is overheating and throttling a lot and also the GPS works really bad which it did not on the chinese rom!
Now for the doubts:
1 - If i use Fastboot + Miflash to flash the last stable chinese rom, is there the risk of bricking my phone? Because of the way i had unlocked my bootloader i mean?
2 - Is there way to lock the bootloader again, so i can unlock it the right way? I mean using mi unlock and the code that i've received? It will make any difference using the official way in relation to the unofficial way, it will be worth it i mean?
Click to expand...
Click to collapse
1. i suppose no, it will only brick if you have TWRP recovery flashed to recovery partition. My workaround is to never flash TWRP in the first place, but boot to TWRP from Fastboot every time i want to flash something. definitely a hassle but should be guaranteed to work. Never tried though, i am fine with CM ROM and unlocked bootloader.
2. If i read correctly, the latest dev ROM will lock the bootloader back. So if you want to unlock, you must flash the old MIUI version as suggested in the unofficial unlock method again.
raptonicus said:
Hi! Please I really need your experience
I will receive my new Mi 4c with the Bootloader Unlocked from the re seller , Rooted and with Multi language ROM.
Do I have to unlock the bootloader with the official method (which means flashing Cina Dev ROM -to re lock the bootloader- and go on with the Xiaomi's code procedure..) or it is possible to get all things done as soon I get my device by choosing an unofficial weekly miui.eu international ROM and install it normally from the Updater app but also be able to update it every week via Updater without issues?
My problem with flashing is that I don't have my laptop and the one I have now runs win xp.
Click to expand...
Click to collapse
you can unlock via unofficial method. Win XP should be able to flash it. CMIIW though

Thanks but it's not necessary anymore ..I've changed the Mi4c with Mi4.

Fix miui can't be installed on this device, also anti 4 ubl and downgrade possibility

Hi, I just found a thread on MIUI forum which inspire me
http://en.miui.com/thread-3450268-1-1.html
Kudos to the OP in that thread
I tried the tutorial to one of my friend's Note 5, the tutorial works, so now we know that DOWNGRADING FROM 8.82 GLOBAL TO 8.7.26 GLOBAL IS POSSIBLE
Now I need someone with bricked devices because of downgrading to try it, you must download fastboot room first and sideload it to your redmi note 5
Here is the summary and the short version of the already short tutorial (lol), also some fixes needed, for those stuck in "MIUI CANT BE INSTALLED ON THIS DEVICE" error AND NEED AUTHORIZATION CODE TO FLASH
ALSO FOR THOSE IN ANTI 4 WITH FAKE UBL (MAINLY DEVICES SOLD IN INDONESIA), WHO WANT TO FLASH CHINA ROM AND BIND THE MI ACCOUNT TO THE DEVICE TO LATER REQUESTING UNLOCK TO XIAOMI
FOR THOSE WHOSE DEVICES ARE BRICKED BECAUSE OF DOWNGRADING, YOU CAN TRY TO DOWNLOAD THE FASTBOOT ROM AND FLASH IT WITH THE SAME STEP, NEVER TESTED IT WITH EDL MODE, SO ANYONE?
1. Xiaomi Tool
2. XiaomiTool ADB
3. MI FLASH PRO
4. ROM GLOBAL 9.5.19
5. ROM GLOBAL 8.7.26
6. ROM GLOBAL 8.8.2
7. ROM CHINA 8.7.26
8. DRIVER2 QUALCOM, ADB DLL YG BISA DICARI DI POST LAIN
THE STEPS :
1. FLASH YOUR NOTE 5 TO 8.8.2 GLOBAL ROM USING MI FLASH PRO
2. OPEN CMD AND SIDE LOAD USING XIAOMITOOL ADB, COMMAND IS xiaomiadb sideload_miui<spasi>namafile.zip. WHICH IS miui_HMNote5HMNote5ProGlobal_8.7.26_d7fb438aef_8.1.zip. YOUR DEVICE WILL BE DOWNGRADED TO 8.7.2.6 GLOBAL ROM
3. NOW FLASH YOUR PHONE USING ANY TOOL LIKE XIAOMITOOL TO 8.7.2.6 CHINA
4. VOILA, IT WORKS NOW
don't know when Xiaomi will close this bug hole, so try it while you can

Tried to downgrade from 8.82 Global Rom to 8.726 Rom Global, later flashed the China 8.726 rom and it worked
It means we still can downgrade, I think this is a bug in xiaomi server, can anyone use this bug for our advantage?
Thanks

codearm2 said:
FOR THOSE WHOSE DEVICES ARE BRICKED BECAUSE OF DOWNGRADING, YOU CAN TRY TO DOWNLOAD THE FASTBOOT ROM AND FLASH IT WITH THE SAME STEP, NEVER TESTED IT WITH EDL MODE, SO ANYONE?
Click to expand...
Click to collapse
1. if your device was on china rom from the very begining. you flashed global rom over china rom without unlocking BL, and phone got bricked (This MIUI version can not be installed on this device)
Click to expand...
Click to collapse
There should have been note posted about that guide: -
NOT FOR DEVICES HARD BRICKED BY DOWNGRADING ON ARP!
You still need access to recovery/fastboot for that tutorial to work.

Note 7 pro downgrade

Hi Experts,
I have Redmi note 7 pro.I experienced the earlier update 10.3.10 draining my battery too fast.Then I received 10.0.3.12 I think its al right but 10.0.3.7 was best battery backup.So i decided to go back for same
. I tried with service center they failed to downgrade. They said its impossible to downgrade it will brick my device. My mi account have boot loader unlocked with another device redmi 3s prime. I logged in with same account. Will it unlock my note 7 pro bootloader?or is it safe to downgrade? I heard about anti-rollback feature.what should I do?
Its my 1st xda post hope get reply

You can downgrade by unlocking bootloader & then download platform tools (google & download) & extract it to c drive & then extract fastboot rom into same folder & then put your phone in fastboot mode & run the file named flashall.bat & you will be able to downgrade

sujoy khan said:
Hi Experts,
I have Redmi note 7 pro.I experienced the earlier update 10.3.10 draining my battery too fast.Then I received 10.0.3.12 I think its al right but 10.0.3.7 was best battery backup.So i decided to go back for same
. I tried with service center they failed to downgrade. They said its impossible to downgrade it will brick my device. My mi account have boot loader unlocked with another device redmi 3s prime. I logged in with same account. Will it unlock my note 7 pro bootloader?or is it safe to downgrade? I heard about anti-rollback feature.what should I do?
Its my 1st xda post hope get reply
Click to expand...
Click to collapse
To downgrade u would first need to unlock the bootloader, install TWRP, clear all the partitions (virtually making sure that only thing left on the phone is recovery) and then flash the respective Recovery ROM.
Use Peter's TWRP for this.

please make a video
Naveenthemi said:
To downgrade u would first need to unlock the bootloader, install TWRP, clear all the partitions (virtually making sure that only thing left on the phone is recovery) and then flash the respective Recovery ROM.
Use Peter's TWRP for this.
Click to expand...
Click to collapse
please make a video. I want to intall fast boot install.