Related
Hello
i just downloaded some music files and after that my phone dead !
os not boated ! and i can just go to boot loader ! in boot loader when i click on factory reset nothing happen and its just go to fastboot section !
when i connect my phone to computer my computer cant recognize phone ! (htc sync manager installed )
i just wana make my phone alive dosent matter to install offical rom ore unoffical ! but i cant do anything when coputer cant recognize phone !
what is your suggestion ?
and i cant enable usb debuging because i not have acces to phone ! i can just go to boot loader
s.j-rez said:
and i cant enable usb debuging because i not have acces to phone ! i can just go to boot loader
Click to expand...
Click to collapse
and a new thing ! sometimes whe nreboting i have (enter password to encrypt storage )
what is that ? i didnt set ane passwords
Sorry, but i don't know anything about this "encrypt storage" thing.
You can try to unlock via htcdev.com and flash twrp recovery & a stock rom.
old.splatterhand said:
Sorry, but i don't know anything about this "encrypt storage" thing.
You can try to unlock via htcdev.com and flash twrp recovery & a stock rom.
Click to expand...
Click to collapse
but i have problem with unlocking via htcdev.com ! after final step when i chose yes and power button phone reboted but nothing happen ! and when i go into bootloader i still see locked !
there is any whay to install stock rom without unlocking ?
i try to install stock rom OTA but after chechking file still nothing happen
thank you
Only a RUU, if available for your model.
old.splatterhand said:
Only a RUU, if available for your model.
Click to expand...
Click to collapse
i couldent find ruu can u find it ? my version is 401 euroupe! can i do anything ? what about that unlocking problem ?
Look into my index thread, you will find latest Ruu for 401 LTE there as zip.
No idea about your unlock problem.
old.splatterhand said:
Look into my index thread, you will find latest Ruu for 401 LTE there as zip.
No idea about your unlock problem.
Click to expand...
Click to collapse
seen that topic before ! i have 401 ul version ! ant there is just a radio for that version not full rom ! can i find full rom for this ?
I added the link myself these days, so take a look again.
old.splatterhand said:
I added the link myself these days, so take a look again.
Click to expand...
Click to collapse
sry i couldent find it im a noob sry
can u lnk this directly ?
absloutly nothing in first page
old.splatterhand said:
I added the link myself these days, so take a look again.
Click to expand...
Click to collapse
this is it ?
PL80IMG_K2_UL_JB422_SENSE50_MR_HTC_Europe_3.11.401 .1_R adio__1.18.40a.00.05_10.81a.40
.23L_release_338297_signed.zip
s.j-rez said:
this is it ?
PL80IMG_K2_UL_JB422_SENSE50_MR_HTC_Europe_3.11.401 .1_R adio__1.18.40a.00.05_10.81a.40
.23L_release_338297_signed.zip
Click to expand...
Click to collapse
Yes.
old.splatterhand said:
Yes.
Click to expand...
Click to collapse
i must flash this this ? thers is no any instaling file !
just fastboot flash rom.zip is ok ?
Bootloader must be locked!
Rename the Orange zip to PL80IMG.zip, copy it to external sdcard, boot your phone to bootloader and let it search for files to update. It will ask you, if you wat to flash the zip, confirm with Vol+ and follow the instructions
old.splatterhand said:
Bootloader must be locked!
Rename the Orange zip to PL80IMG.zip, copy it to external sdcard, boot your phone to bootloader and let it search for files to update. It will ask you, if you wat to flash the zip, confirm with Vol+ and follow the instructions
Click to expand...
Click to collapse
bootloader is locked i couldent unlock it anywhay ! and i put that file into sdcard and goes to bootloader and a green message showes lodaing...[pl80img.zip] and after that nothing happen ! no any meesages ! u have any idea ?
therse is anotehr whay to unlock bootloader (not htcdev.com) ? i think i must try to unlock phone in another whay
Sorry, no idea. If this file not work, i don't know what can help you.
hi all i don't know if this is the right section, in case i'm sorry but i'm a bit desperate x.x this is my problem:
i've a ze551ml deluxe version while flashing some things (supersu,kernel ecc..) i've flashed also a file called splashscreen.img(i don't know if it's the cause of my problem) but after that my phone It starts only in fastboot mode recovery doesn't work,i've tried to flash some img files like (boot.img,recovery ecc..) but nothing it's happend, if try to flash a raw file by asus flash tool give an error while flashing "remote: not allowed to flash this partition" i don't know what to do please help me :'(
UserName_K said:
hi all i don't know if this is the right section, in case i'm sorry but i'm a bit desperate x.x this is my problem:
i've a ze551ml deluxe version while flashing some things (supersu,kernel ecc..) i've flashed also a file called splashscreen.img(i don't know if it's the cause of my problem) but after that my phone It starts only in fastboot mode recovery doesn't work,i've tried to flash some img files like (boot.img,recovery ecc..) but nothing it's happend, if try to flash a raw file by asus flash tool give an error while flashing "remote: not allowed to flash this partition" i don't know what to do please help me :'(
Click to expand...
Click to collapse
Which partition has been flashed with "splashscreen.img" and whioch tool did you use for it?
LS.xD said:
Which partition has been flashed with "splashscreen.img" and whioch tool did you use for it?
Click to expand...
Click to collapse
i've flashed by recovery so i don't know:crying:
there is a way for fix it? =(
UserName_K said:
i've flashed by recovery so i don't know:crying:
there is a way for fix it? =(
Click to expand...
Click to collapse
Do you have a link to the file? You can't flash .img files directly by recovery...
LS.xD said:
Do you have a link to the file? You can't flash .img files directly by recovery...
Click to expand...
Click to collapse
it was a mistake :crying: anyway i don't have the link for splashscreen.img but if i remember well i've download it when i've unlocked the bootloader, i can solve in some way?Even by lost all data,all solutions are good !
UserName_K said:
it was a mistake :crying: anyway i don't have the link for splashscreen.img but if i remember well i've download it when i've unlocked the bootloader, i can solve in some way?Even by lost all data,all solutions are good !
Click to expand...
Click to collapse
What happens when you flash boot.img + recovery.img using fastboot? Any error messages?
LS.xD said:
What happens when you flash boot.img + recovery.img using fastboot? Any error messages?
Click to expand...
Click to collapse
just try for security , both operation working fine no error
UserName_K said:
just try for security , both operation working fine no error
Click to expand...
Click to collapse
And once done you can't boot stock recovery?
LS.xD said:
And once done you can't boot stock recovery?
Click to expand...
Click to collapse
nope, boot always in fastboot mode
UserName_K said:
nope, boot always in fastboot mode
Click to expand...
Click to collapse
Are you using the .img files from latest firmware UL-Z00A-WW-4.21.40.184-user ??
LS.xD said:
Are you using the .img files from latest firmware UL-Z00A-WW-4.21.40.184-user ??
Click to expand...
Click to collapse
just tried and nothing seems changed
UserName_K said:
just tried and nothing seems changed
Click to expand...
Click to collapse
Download latest TWRP
Try to boot is as followed:
fastboot boot twrp-3.0.2-0-Z00A.img
LS.xD said:
Download latest TWRP
Try to boot is as followed:
fastboot boot twrp-3.0.2-0-Z00A.img
Click to expand...
Click to collapse
done but it's the same, boot in fastboot mode i'm really confused never happend something like this
UserName_K said:
done but it's the same, boot in fastboot mode i'm really confused never happend something like this
Click to expand...
Click to collapse
I'm really curious what file you flashed to which partition, its awkward that you can't exactly remember what you did to make the phone beeing like this.
Just by the way: is your bootloader still unlocked?
LS.xD said:
I'm really curious what file you flashed to which partition, its awkward that you can't exactly remember what you did to make the phone beeing like this.
Just by the way: is your bootloader still unlocked?
Click to expand...
Click to collapse
mmh i've follow the guide for bootloader here http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063
and probably here i've get the splashscreen, when you unlock the bootloader the splashscreen become white, the file img restore the default asus's splashscreen anyway how can check the status of bootloader?
UserName_K said:
mmh i've follow the guide for bootloader here http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063
and probably here i've get the splashscreen, when you unlock the bootloader the splashscreen become white, the file img restore the default asus's splashscreen anyway how can check the status of bootloader?
Click to expand...
Click to collapse
I just minded that your device has a own section.
UNBRICK GUIDE
Your problem should be posted HERE
LS.xD said:
I just minded that your device has a own section.
UNBRICK GUIDE
Your problem should be posted HERE
Click to expand...
Click to collapse
ok i'll try thanks
hi @ante0
i just tried to do a full unroot through supersu...
and now i cant boot -.-
error mode
attention
please update system again
error!
func no : 10 (boot image)
error no : 2 (load failed)
ezraiil1 said:
hi @ante0
i just tried to do a full unroot through supersu...
and now i cant boot -.-
error mode
attention
please update system again
error!
func no : 10 (boot image)
error no : 2 (load failed)
Click to expand...
Click to collapse
PROBLEM SOLVED!
had to extract and flash kernel manually.
Download this: https://mega.nz/#!kGZEjZSQ!iLAW0onaLACrG5v7BCYZUVH6WMO1ued8PWWcpMTY6Fs
Boot to fastboot mode.
Extract bootoreo.zip:
fastboot flash kernel KERNEL.IMG
fastboot flash ramdisk RAMDISK.IMG
See if that helps.
Edit: I was too late. Oh well
ante0 said:
Download this: https://mega.nz/#!kGZEjZSQ!iLAW0onaLACrG5v7BCYZUVH6WMO1ued8PWWcpMTY6Fs
Boot to fastboot mode.
Extract bootoreo.zip:
fastboot flash kernel KERNEL.IMG
fastboot flash ramdisk RAMDISK.IMG
See if that helps.
Edit: I was too late. Oh well
Click to expand...
Click to collapse
@ante0 please help ..!!!
ante0 said:
Download this: https://mega.nz/#!kGZEjZSQ!iLAW0onaLACrG5v7BCYZUVH6WMO1ued8PWWcpMTY6Fs
Boot to fastboot mode.
Extract bootoreo.zip:
fastboot flash kernel KERNEL.IMG
fastboot flash ramdisk RAMDISK.IMG
See if that helps.
Edit: I was too late. Oh well
Click to expand...
Click to collapse
Yo boss I know is not even the tread but I need little help to understand what do I need to do after installing custom kernel should I just install and let it be or I need any other app
I install hyperplus kernel on mate 9 oreo cause it supposed to get better battery life and speed thank you very much
mataflakitas said:
@ante0 please help ..!!!
Click to expand...
Click to collapse
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
Caguayote said:
Yo boss I know is not even the tread but I need little help to understand what do I need to do after installing custom kernel should I just install and let it be or I need any other app
I install hyperplus kernel on mate 9 oreo cause it supposed to get better battery life and speed thank you very much
Click to expand...
Click to collapse
You could install a kernel manager, but it shouldn't really be needed.
Unless you want to tweak the default settings a bit, then get something like Kernel Adiutor
ante0 said:
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
@Ante Exactly I was in Oreo and by mistake install an image of nougat .. then I ended up with that, some solution please help me, my version of my phone L09 C432 .. @Ante help please..?
Click to expand...
Click to collapse
ante0 said:
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
You could install a kernel manager, but it shouldn't really be needed.
Unless you want to tweak the default settings a bit, then get something like Kernel Adiutor[/QUOTE
Thank you for your help boss also the guy recommend
To do a full cycle charge the discharge for the kernel to set up I'm little confused how can i do a full charge if when I flash the kernel my battery was like 40%
So I guess the kernel startup from that.
Click to expand...
Click to collapse
mataflakitas said:
ante0 said:
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
Click to expand...
Click to collapse
@Ante Exactly I was in Oreo and by mistake install an image of nougat .. then I ended up with that, some solution please help me, my version of my phone L09 C432 .. @Ante help please..
Click to expand...
Click to collapse
Get to fastboot mode, you're currently in error mode.
Just hold power and volume down while USB is plugged in and you should end up in Fastboot mode. It might take a few tries.
Then flash a recovery for Oreo.
Caguayote said:
ante0 said:
What did you flash?
That error displays IF you flash an image intended for Nougat. Because on Nougat the recovery/boot partition included both ramdisk and zimage, in Oreo they are separate.
Or if it's corrupted.
You could install a kernel manager, but it shouldn't really be needed.
Unless you want to tweak the default settings a bit, then get something like Kernel Adiutor
Click to expand...
Click to collapse
Thank you for your help boss also the guy recommend
To do a full cycle charge the discharge for the kernel to set up I'm little confused how can i do a full charge if when I flash the kernel my battery was like 40%
So I guess the kernel startup from that.
Click to expand...
Click to collapse
Just let it drain now to 0% then charge to 100.
ante0 said:
Get to fastboot mode, you're currently in error mode.
Just hold power and volume down while USB is plugged in and you should end up in Fastboot mode. It might take a few tries.
Then flash a recovery for Oreo.
Exactly I can enter fastboot mode, but I do not know what files to flash, what do you recommend ...?
@ante0 ..
Click to expand...
Click to collapse
mataflakitas said:
ante0 said:
Get to fastboot mode, you're currently in error mode.
Just hold power and volume down while USB is plugged in and you should end up in Fastboot mode. It might take a few tries.
Then flash a recovery for Oreo.
Click to expand...
Click to collapse
Exactly I can enter fastboot mode, but I do not know what files to flash, what do you recommend ...?
@ante0 ..
Click to expand...
Click to collapse
Do you want to go back to stock recovery or TWRP?
If stock you can use this: https://mega.nz/#!9C4BkQyC!yYJWzK_gnvuwR8htnyDjJDFPgs_E3SBZ61MSJTnf060
If TWRP use this: https://mega.nz/#!tgd2BIRS!NOk3XkSaBX8PC5xjyrZNyIIz52aSoPZFphQNauhTKGQ
ante0 said:
Do you want to go back to stock recovery or TWRP?
If stock you can use this: https://mega.nz/#!9C4BkQyC!yYJWzK_gnvuwR8htnyDjJDFPgs_E3SBZ61MSJTnf060
If TWRP use this: https://mega.nz/#!tgd2BIRS!NOk3XkSaBX8PC5xjyrZNyIIz52aSoPZFphQNauhTKGQ
Click to expand...
Click to collapse
I will try to keep you informed...thanks
ante0 said:
Do you want to go back to stock recovery or TWRP?
If stock you can use this: https://mega.nz/#!9C4BkQyC!yYJWzK_gnvuwR8htnyDjJDFPgs_E3SBZ61MSJTnf060
If TWRP use this: https://mega.nz/#!tgd2BIRS!NOk3XkSaBX8PC5xjyrZNyIIz52aSoPZFphQNauhTKGQ
Click to expand...
Click to collapse
@ante0 brother install as you said, recovery stock everything well the flashing, but I do not achieve any change in the phone everything remains the same .. what is happening ..? It does not let me Reaching the recovery .. neither stock, nor TWRP helps @ ante0 .. what will be my problem
Help please ..up up ..!!! ???
i am having the same issue, all of my partitions are seemingly flashed correctly in order but i am bootlooping every gsi or openkirin build i flash idk what to do :/
Same here, I have high hopes for one day being able to flash these but even following all the instructions such as factory reset, format the data partition etc., it's a bootloop every time for me when flashing these and then a tedious return to EMUI.
TheDude1998 said:
i am having the same issue, all of my partitions are seemingly flashed correctly in order but i am bootlooping every gsi or openkirin build i flash idk what to do :/
Click to expand...
Click to collapse
I stuck with my Mate 9 Error mode numbers 11 and 2
mataflakitas said:
@ante0 brother install as you said, recovery stock everything well the flashing, but I do not achieve any change in the phone everything remains the same .. what is happening ..? It does not let me Reaching the recovery .. neither stock, nor TWRP helps @ ante0 .. what will be my problem
Click to expand...
Click to collapse
Hi, I have an error query when I start the phone Error Mode Func 11 Recovery Image, Error 2 Image Failed, my version is MH9-L09C432B368 I got this version following this tutorial:
android-hilfe.de/[/url] forum / root-custom-roms-modding-fuer-huawei-mate-9.3022 / anleitung-upgrade-auf-oreo-downgrade-auf-nougat.857015.html
everything worked perfect, but I got a version via OTA the 369 having the TWRP, Bootloader unlocked I had the brilliant idea to block the Bootloader to install version 369, there I start the problem of error 11 and 2.
Can anyone tell me what files should I flash to recover the cell phone? I have understood that I must flash the recovery img images as well as the img of the erecovery but I could not make the cell phone work, if I install the twrp it does not start either, they could tell me what steps I should take. Give to be able to save my cell phone?
Thank you very much everyone for the help you can give me
hybrid09 said:
Hi, I have an error query when I start the phone Error Mode Func 11 Recovery Image, Error 2 Image Failed, my version is MH9-L09C432B368 I got this version following this tutorial:
android-hilfe.de/[/url] forum / root-custom-roms-modding-fuer-huawei-mate-9.3022 / anleitung-upgrade-auf-oreo-downgrade-auf-nougat.857015.html
everything worked perfect, but I got a version via OTA the 369 having the TWRP, Bootloader unlocked I had the brilliant idea to block the Bootloader to install version 369, there I start the problem of error 11 and 2.
Can anyone tell me what files should I flash to recover the cell phone? I have understood that I must flash the recovery img images as well as the img of the erecovery but I could not make the cell phone work, if I install the twrp it does not start either, they could tell me what steps I should take. Give to be able to save my cell phone?
Thank you very much everyone for the help you can give me
Click to expand...
Click to collapse
Thanks ... :good:
mataflakitas said:
Thanks ... :good:
Click to expand...
Click to collapse
@mataflakitas
You can resolve your problem?
hybrid09 said:
@mataflakitas
You can resolve your problem?
Click to expand...
Click to collapse
I'm not in it, I'll confirm if I can succeed....:good:
Hi friends
My phone flashing badly in nughat
Now
1_not working Bluetooth
2_system update is removed from setting
3_dload method not working
4_pc not know my phone even in fastboot
Status phone:
Bootloader unlock
Frp lock
Recovery stock
Frd-l09c185b360
Please help me??
delete
PremiumBlaze said:
Maybe use hurupdater to flash the same version
Click to expand...
Click to collapse
My recovery is officiall... can't flash recovery custom
delete
PremiumBlaze said:
In the official recovery did you try using the download latest firmware and recovery, because it helped me unbrick me out of oreo before
Click to expand...
Click to collapse
I trying but not working....it just working for china and European firmwares
Have you tried flashing TWRP using adb? Then using Hurupdater.
CurlyApple said:
Have you tried flashing TWRP using adb? Then using Hurupdater.[/QUO
I trying flash twrp but pc not know my phone in fastboot
It is bigest my problem
Click to expand...
Click to collapse
DO NOT UPGRADE MAGISK TO 19.x OR YOUR PHONE WILL BOOTLOOP!
All you need is an unlocked bootloader.
Install:
1. Download the file for your device
2. Flash via fastboot
Code:
fastboot flash boot boot.img
3. Reboot
4. Install Magisk Manager
Download for Firmware 53.0.A.6.92:
I3113: Download
I4113: Download
If you like my work, press thanks
I would appreciate your Donation
thanks a lot!
My device is I4193, I flashed the your rooted image of I4113(as they have the same boot image).
my device can boot normally, but in magisk manager , the device still shown as unroot.
wang4632 said:
thanks a lot!
My device is I4193, I flashed the your rooted image of I4113(as they have the same boot image).
my device can boot normally, but in magisk manager , the device still shown as unroot.
Click to expand...
Click to collapse
You need to download the boot-magisk.img and not the boot-stock.img
Schritti said:
You need to download the boot-magisk.img and not the boot-stock.img
Click to expand...
Click to collapse
yes, I download the boot-magisk.img. of wihch the file size is a bit larger then stock one.
wang4632 said:
yes, I download the boot-magisk.img. of wihch the file size is a bit larger then stock one.
Click to expand...
Click to collapse
Could you try the I3113 one? Should also boot.
Schritti said:
Could you try the I3113 one? Should also boot.
Click to expand...
Click to collapse
I tried this one. it can boot normally, but magisk manager still shows unroot..
can you please help patching the stock boot image of I4193?
i uploaded the stock boot image, here is the download link:
https://drive.google.com/file/d/1aN-kTQN8g_HodjSqcPr42e-cyvMriDd0/view?usp=sharing
wang4632 said:
I tried this one. it can boot normally, but magisk manager still shows unroot..
can you please help patching the stock boot image of I4193?
i uploaded the stock boot image, here is the download link:
https://drive.google.com/file/d/1aN-kTQN8g_HodjSqcPr42e-cyvMriDd0/view?usp=sharing
Click to expand...
Click to collapse
Here you go
https://mega.nz/#F!DyQDHI5S!BN44I8xHfk8yf-9AFj5axg
Please report if it works, so i can add it to OP
Schritti said:
Here you go
https://mega.nz/#F!DyQDHI5S!BN44I8xHfk8yf-9AFj5axg
Please report if it works, so i can add it to OP
Click to expand...
Click to collapse
it didn't work. same as before, it boot normally, but shows unroot in magisk manager.
Form XperiaFirm, I saw I4193 is only for HongKong and Taiwan, I'm not sure if it has some difference form other models, maybe I can post the patched boot image in some Chinese forums, I hope some more users can help test it .
Schritti said:
DO NOT UPGRADE MAGISK TO 19.x OR YOUR PHONE WILL BOOTLOOP!
All you need is an unlocked bootloader.
Install:
1. Download the file for your device
2. Flash via fastboot
Code:
fastboot flash boot boot.img
3. Reboot
4. Install Magisk Manager
Download for Firmware 53.0.A.6.92:
I3113: Download
I4113: Download
If you like my work, press thanks
I would appreciate your Donation
Click to expand...
Click to collapse
I wiped my device by using newflasher to flash the stock 53.0.A.6.92 firmware and then flashed boot-magisk-I4113, and now it works. I can see root status in magisk manager.
I don't know what is the reason, but anyweay it works now. thnak you!
wang4632 said:
DO NOT UPGRADE MAGISK TO 19.x OR YOUR PHONE WILL BOOTLOOP!
All you need is an unlocked bootloader.
Install:
1. Download the file for your device
2. Flash via fastboot
I wiped my device by using newflasher to flash the stock 53.0.A.6.92 firmware and then flashed boot-magisk-I4113, and now it works. I can see root status in magisk manager.
I don't know what is the reason, but anyweay it works now. thnak you!
Click to expand...
Click to collapse
Great!
Could be because you maybe had your phone rooted with 19.0 on the previous firmware
But i cant install modules from magisk. MMMM, can install, after restart not appear modules in modules part
@Schritti Can you make this for .8.71 firmware if possible please? Many thanks in advance
Chronic2k13 said:
@Schritti Can you make this for .8.71 firmware if possible please? Many thanks in advance
Click to expand...
Click to collapse
You can use my TWRP to flash Magisk 18.1
https://forum.xda-developers.com/xperia-10/development/recovery-twrp-3-3-1-0-unofficial-t3941158
Schritti said:
You can use my TWRP to flash Magisk 18.1
https://forum.xda-developers.com/xperia-10/development/recovery-twrp-3-3-1-0-unofficial-t3941158
Click to expand...
Click to collapse
I don't think it is possible to install magisk without sd card decrypt working.
ToastedToast said:
I don't think it is possible to install magisk without sd card decrypt working.
Click to expand...
Click to collapse
External SD should be fine
I flashed magisk-boot.img and all worked.
Now i wanted to unroot and stupid me, not thinking about what i am doing, i unrooted through magisk manager.
So i'm stuck in a boot loop.
Flashing the stock-boot.img in fastboot mode now got me to fastboot not recognizing my phone anymore.
When i check "fastboot devices" it returns "???????????? fastboot".
Flash mode still allows me to flash another boot.img with "fastboot flash boot stock-boot.img" but that doesn't fix the bootloop.
Any ideas?
Newflasher with xperifirm firmware files. Then factory reset from booted phone to re-gain safetynet
ToastedToast said:
Newflasher with xperifirm firmware files. Then factory reset from booted phone to re-gain safetynet
Click to expand...
Click to collapse
Wow! That worked! Thank you so much!!!
VelocityHD said:
Wow! That worked! Thank you so much!!!
Click to expand...
Click to collapse
blade85 said:
Since I'm in a similar situation can you please send me the links where I can download the original firmware images?
Thanks in advance
Click to expand...
Click to collapse
Forget it I found everything, which Market and Operator did you take? I see there's no Austrian package?
Does anyone also have a european 53.0.A.6.92 firmware? Would need it to be able to root it