Code:
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation
- Copy ROM & Gapps
- Reboot in recovery
- Wipe System-Data/Factory reset
- Flash the ROM zip
- Flash Gapps (OpenGapps - ARM/7.1)
- Flash LineageOS SU addon if you want native root
- Reboot
- Install Substratum from Play Store (ThemeInterfacer built-in to ROM)
Download
Builds : AndroidFileHost - 5/11/17
Source Code:
ROM: https://github.com/LineageOS
Device Tree MSM: https://github.com/codyf86/android_device_motorola_msm8916-common
Device Tree Surnia: https://github.com/codyf86/android_device_motorola_surnia
Kernel: https://github.com/codyf86/android_kernel_motorola_msm8916
Pronto Wifi: https://github.com/codyf86/vendor-qcom-opensource-wlan-prima
Substratum Merge: https://github.com/LineageOMS
Substratum: https://github.com/substratum
What's Different:
Rootless Substratum (OMS)
Kernel updated to 3.10.94 & LA.BR.1.2.9_rb16 (CAF)
Prima/Pronto wifi updated to LA.BR.1.2.9_rb16 (CAF)
Disclaimer Part Deux:
If you didn't do a clean install; don't ask for help.
Also WRITE DOWN YOUR MAC ADDRESS BEFORE FLASHING. Once you boot, edit /system/etc/firmware/prima/WCNSS_qcom_cfg.ini as root and change Intf0MacAddress= to your desired MAC address. Save and reboot.
Screenshots:
Didn't see anyone else with a 'stock' lineage rom with OMS; if there is already a thread don't throw stones... Not trying to add to the Lineage roms there already are; just wanted some OMS in my life.
What's oms
Sent from my Moto G using Tapatalk
kskillz2000 said:
What's oms
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Substratum Overlay Management System
--
Related
https://postimage.org/
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Bugs and changelogs are in 2nd post !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
1. Download the ROM from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4.. Reboot to recovery mode ( Vol UP + Power )
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
Note: Needed if you are updating from other android version or stock
7. Install CM zip and GApps zip
8. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
How to report bugs :
(I don't have my g6 atm so i can't test builds so i need testers to report the rom bugs)
Enable root access in the developer options
Download this app
https://play.google.com/store/apps/details?id=com.tortel.syslog
Take a logcat and upload the zip for me and explain the bugs u faced
Don't ask for eta !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download
Beta 1
HTML:
http://www.mediafire.com/download/1i6l0e1c9ec1v4k/cm_g6_u10-ota-beta1.zip
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the ROM Source available on Github.
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Cyanogenmod team @vahan @PieroV
XDA:DevDB Information
[ROM][4.4][UNOFFICIAL][g6_u10] CyanogenMod 11 for Huawei G6 U10 , ROM for the Huawei Ascend G6
Contributors
messi2050
Source Code: https://github.com/messi2050?tab=repositories
ROM OS Version: 4.4.x KitKat
Based On: CyanogenMod
Version Information
Status: abandoned
Created 2016-07-08
Last Updated 2016-07-08
/* Current bugs */
- Camera
- Wifi
- Sensors
u tell me
messi2050 said:
https://postimage.org/
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Bugs and changelogs are in 2nd post !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
1. Download the ROM from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4.. Reboot to recovery mode ( Vol UP + Power )
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
Note: Needed if you are updating from other android version or stock
7. Install CM zip and GApps zip
8. Reboot to system
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
How to report bugs :
(I don't have my g6 atm so i can't test builds so i need testers to report the rom bugs)
Enable root access in the developer options
Download this app
https://play.google.com/store/apps/details?id=com.tortel.syslog
Take a logcat and upload the zip for me and explain the bugs u faced
Don't ask for eta !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download
Beta 1
HTML:
http://www.mediafire.com/download/1i6l0e1c9ec1v4k/cm_g6_u10-ota-beta1.zip
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Check out the ROM Source available on Github.
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Credits
Cyanogenmod team
@vahan @PieroV
XDA:DevDB Information
[ROM][4.4][UNOFFICIAL][g6_u10] CyanogenMod 11 for Huawei G6 U10 , ROM for the Huawei Ascend G6
Contributors
messi2050
Source Code: https://github.com/messi2050?tab=repositories
ROM OS Version: 4.4.x KitKat
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-07-08
Last Updated 2016-07-08
Click to expand...
Click to collapse
Can you make the "I Void Warranties" pic a boot animation or full sized wallpaper?
Sent from my Nexus 6P using Tapatalk
Jammol said:
Can you make the "I Void Warranties" pic a boot animation or full sized wallpaper?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
No i can't this is original picture
https://www.google.com.eg/search?q=...AUIBygB&biw=601&bih=962#imgrc=3uTOzUtV0kWIOM:
messi2050 said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Bugs and changelogs are in 2nd post !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
1. Download the ROM from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4.. Reboot to recovery mode ( Vol UP + Power )
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
Note: Needed if you are updating from other android version or stock
7. Install CM zip and GApps zip
8. Reboot to system
Enjoy!
Click to expand...
Click to collapse
Hi, sry I'm noob in android system, I can do this on a Huawei Ascend Y530? and where I can download GAPPS? and after i do the reset how do I install those two zip files?
messi2050 said:
/* Current bugs */
- Camera
- Wifi
- Sensors
u tell me
Click to expand...
Click to collapse
Any of these fixed?
TWRP Recovery 3.3.1-0 For Lenovo Phab 2 Pro (PB2-690Y)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Welcome all Phab 2 Pro (PB2-690Y) users, This is latest TWRP Recovery for your device By TWRPBuilder Team
CHANGELOG for 3.3.1-0:
* Fix selinux issues during formatting - dianlujitao
* Various fixes for toybox and toolbox builds - CaptainThrowback and bigbiff
* Flash both A and B partitions when installing a recovery ramdisk - Dees_Troy
* Add option to uninstall TWRP app from /system - Dees_Troy
* Create digest for subpartitions - bigbiff
DownloadsLenovo Phab 2 Pro (PB2-690Y) Recovery img
Sources:
Code:
[CENTER][URL="https://github.com/TwrpBuilder/android_device_lenovo_PB2PRO"][COLOR="bule"]Device tree[/COLOR][/URL]
[URL="https://github.com/TeamWin/Team-Win-Recovery-Project"][COLOR="bule"]TeamWin Github
[/COLOR][/URL][/CENTER]
How to install:
you must have fastboot installed on your pc and then:
Code:
adb reboot bootloader
fastboot flash recovery recovery.img
Don't Forget to Hit Thanks :good:
PB2-690Y LineageOS, next steps.
Many thanks. I can confirm that this build is operational on 690Y/TWRP 3.3.1
The only other prior operational 690Y TWRP was from SevenMaxs 3.0.3 -- i.e. non treble, therefore not Android7+ capable.
For those who may have tried, or have interest,
none of the Kuntao/690M TWRP or LineageOS builds function on 690Y, perhaps with good reason.
Suspect key differences that make this build operational is msm8952 (vs 8953), adreno510 (vs 506) and likely arm-7-a-neon (vs arm8-a)... YMMV. Others?
Consider this an open call for comment to make a 690Y LineageOS build -- could be as simple as that.
StagOS [Official] [Raphael]
is a custom-ROM based on AOSP that aims to provide a minimalist experience with useful features for customization.
This is a Los-Fod, Miui Vendor based build
Updates and changelogs
Download
FLASH INSTRUCTIONS
Please familiarize yourself with flashing and custom rom use before attempting to flash the from.
1) Backup Everything (Most Important)
2) Download ROM, Latest vendor, , G-Apps , Magisk Debug,dfe if you are encrypted
3) Reboot to a Recovery (TWRP,Ofox...)
4) Wipe System, Data, Cache, Dalvik Cache.
5) Flash - Vendor,ROM, G-Apps, Magisk Debug, dfe if you are encrypted
6) Once done, wipe cache.
7) Reboot to System.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Sources
ROM Source: Stag-OS Sources
Device Source: Raphael
Kernel Source: Perf+ Kernel
Perf + Kernel is prebuilt
Created 2020-10-11
Last Updated 2020-10-11
Status : OFFICIAL
By @IronGFLy
reserved
Hey, what is Magisk debug?
Screenshots please
Coolness3579 said:
Hey, what is Magisk debug?
Click to expand...
Click to collapse
https://drive.google.com/file/d/1X8bd2iFUn5dN63EKDLXHVLmsdcxh0lB2/view?usp=sharing
Thalaivaa said:
Screenshots please
Click to expand...
Click to collapse
Big source update coming soon, after that
Updated (10/2/2021):
Starting from now, every custom ROM that I modified or collected is now in other topics: Samsung Galaxy Core 2 ROMs, Kernels, Recoveries
Link: https://forum.xda-developers.com/f/samsung-galaxy-core-2-roms-kernels-recoveries.6988/
Disclaimer:
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I'm sorry if my English is bad as it's not my native language.
On this thread, I'm going to share a custom ROM that I like best for my Galaxy Core 2: Resurrection Remix.
ROM Information:
ROM Name: Resurrection Remix
ROM Version: v5.4.2
Based on: Android 5.1.0 Lollipop
Compatibility: For all Galaxy Core 2 model (SM-G355H/SM-G355M/SM-G355HN)
Features:
* Based on the original custom ROM made by @Ih24n.
* Removed some unnecessary apps.
* This is an odexed ROM, so it will save your storage and it will boot faster.
* All fix made by @Ih24n are intergrated.
* Built-in root is intergrated (Original custom ROM doesn't have built-in root).
* Updated v2:
- All fixes are integrated with an adblock host file.
- Fixed bug that cause bootloop after installing some apps.
* Added some tweaks in build.prop.
Bugs:
- SystemUI might restart sometimes.
- The screen might be glitched, but don't worry. There's no problem with that.
- Tell me if you have issues when using this ROM.
Requirements:
- A Galaxy Core 2 device (Your device must be in AOB1 firmware).
- Custom recovery (You should use TWRP).
How to install? (Updated in 25/8/2021)
1. Reboot your device to recovery mode.
2. Wipe: Dalvik-cache, Cache, Data, System.
3. Choose Install.
4. Choose file "RR_v5_Modified.zip"
5. Swipe to Install.
6. Flash GApps (optional).
7. Restart to System.
More information about this ROM:
http://www.sandroidteam.com/2016/10/custom-rom-resurrection-remix-rr-542.html
Download links (Updated in 25/8/2021):
ROM: Here
GApps: https://opengapps.org/
Kernel source: Here
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Features:
* Based from Latest Crdroid 9 Android 13
* Encrypted build
* Gapps Build
* Selinux enforcing and Safety net passes by default
* Updated to adreno v530
* More info - Click here
First Time Installation:
* Backup before you begin
* Reboot to provided or TWRP based recovery.
* Format Data , even coming from crDroid 7.x
(otherwise you may not able to boot ROM due to encryption complexities)
* Flash ROM via adb sideload
* Reboot and profit!
Update Installation:
* Backup before you begin
* Ensure you are on provided 12/13 recovery
* Use Updater app to download update and flash
(or download update separately and use Updater app with Local update option)
* No need to flash gapps if already flashed.
Download:
Click Here
Known issues:
* None.
Sources:
ROM: https://github.com/crdroidandroid
Device tree: https://github.com/crdroidandroid/android_device_xiaomi_sm8150-common
Kernel link: https://github.com/crdroidandroid/android_kernel_xiaomi_sm8150
Crdroid official vayu ROM: https://forum.xda-developers.com/t/rom-13-0-crdroid-9-official.4516191/
-------------------------------------------------------------------------------------------------------
Liked my Modified ROM? click the liked button !
If your experiencing a performance problem it is due to some of my tweaks ill upload a update today
Update: Uploaded! Kindly install the new rom