Related
Hello Guys,
I'm now in deep deep trouble as my Nexus 5 has got soft bricked and now stuck in a bootloop. Yesterday evening i unrooted my device, flashed everything to stock and locked the bootloader back because i was getting a really awful battery life upon rooting. Hence thought of reverting to stock. So flashed the stock image of 4.4.2 and setup my phone just like it came from a factory. Only thing i did this time was disable some Google Apps i.e Play News, Games & Magazines, Movies etc. Till midnight it was working too good with only a marginal battery drain on idle i.e 1% in 2 hrs or so.
Today morning when i woke up, i just entered the PIN code and unlocked the homescreen and then it just got stuck. I restarted my device and since then, its just stuck in a bootloop and whenever the phone tries to restart the OS, its gives numerous errors all related to Play sErvices and something like android.process.acore and Media.
I tried to factory reset by going through the stock recovery but even in that it gives the errors " Failed to mount /cache" and "Failed to mount /cache/recovery" with invalid arguments in the brackets.
Now i can't even flash stock as the Bootloader is in Locked State. I'm able to flash unlock Bootloader but when it asks to restart "fastboot reboot", it again gets stuck on the Google Play services error resulting again in locked state. That leaves me with a LOCKED BOOTLOADER, STOCK RECOVERY & NO USB DEBUGGING ENABLED.
What can i do now to get my device working people ? Feel like :crying: since its happened. Moreover, i can't RMA it as I'm now in a different country from where the phone wasn't purchased.
BBThumbHealer said:
Hello Guys,
I'm now in deep deep trouble as my Nexus 5 has got soft bricked and now stuck in a bootloop. Yesterday evening i unrooted my device, flashed everything to stock and locked the bootloader back because i was getting a really awful battery life upon rooting. Hence thought of reverting to stock. So flashed the stock image of 4.4.2 and setup my phone just like it came from a factory. Only thing i did this time was disable some Google Apps i.e Play News, Games & Magazines, Movies etc. Till midnight it was working too good with only a marginal battery drain on idle i.e 1% in 2 hrs or so.
Today morning when i woke up, i just entered the PIN code and unlocked the homescreen and then it just got stuck. I restarted my device and since then, its just stuck in a bootloop and whenever the phone tries to restart the OS, its gives numerous errors all related to Play sErvices and something like android.process.acore and Media.
I tried to factory reset by going through the stock recovery but even in that it gives the errors " Failed to mount /cache" and "Failed to mount /cache/recovery" with invalid arguments in the brackets.
Now i can't even flash stock as the Bootloader is in Locked State. I'm able to flash unlock Bootloader but when it asks to restart "fastboot reboot", it again gets stuck on the Google Play services error resulting again in locked state. That leaves me with a LOCKED BOOTLOADER, STOCK RECOVERY & NO USB DEBUGGING ENABLED.
What can i do now to get my device working people ? Feel like :crying: since its happened. Moreover, i can't RMA it as I'm now in a different country from where the phone wasn't purchased.
Click to expand...
Click to collapse
I had the same problem.
just download this :
http://liciousroms.com/nexus5_restore.html
and do this instructions :
INSTRUCTIONS::
1) Download and install DRIVERS
2) Download and extract Nexus_5_KOT49H_Restore.zip,
3) Turn on your phone, and connect your phone to the computer (make sure you have USB Debugging enabled on the tablet)
4) Open up folder where you extracted the Nexus_5_KOT49H_Restore.zip
5) Double Click on the "Recovery_Nexus7.bat" and follow the instructions,,,,it really is that easy! (watch video and follow along)
6) If your phone will not boot and you need to restore, boot your phone into fastboot (volume down and power) and click the "Dead_Nexus5.bat" file found in the folder
2) Download and extract Nexus_5_KOT49H_Restore.zip,
3) Turn on your phone, and connect your phone to the computer (make sure you have USB Debugging enabled on the tablet)
4) Open up folder where you extracted the Nexus_5_KOT49H_Restore.zip
5) Double Click on the "Recovery_Nexus7.bat" and follow the instructions,,,,it really is that easy! (watch video and follow along)
6) If your phone will not boot and you need to restore, boot your phone into fastboot (volume down and power) and click the "Dead_Nexus5.bat" file found in the folder
^ I can't enable USB debugging as i'm unable to boot into OS.
Guys please HELP ! I'm only looking upto XDA to rescue me out. :crying:
BBThumbHealer said:
Guys please HELP ! I'm only looking upto XDA to rescue me out. :crying:
Click to expand...
Click to collapse
Hi! Check this http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833.
Tapatalk-kal küldve az én Nexus 5-el
^ I can't enable USB debugging as i'm unable to boot into OS.
Click to expand...
Click to collapse
Read this:
6) If your phone will not boot and you need to restore, boot your phone into fastboot (volume down and power) and click the "Dead_Nexus5.bat" file found in the folder
Click to expand...
Click to collapse
And try suggested instruction. You don't even need to boot into OS.
Rip95 said:
Read this:
And try suggested instruction. You don't even need to boot into OS.
Click to expand...
Click to collapse
The tool specifically asks for Unlocked Bootloader and like i've already mentioned, its in a lock state. To unlock that, i need to have USB debugging enabled which i can't enable as i'm not able to even see the lockscreen, just stuck in a bootloop. :crying: I'm able to launch the Fastboot Mode and also partially unlock the bootloader but as soon as i type the command "fastboot reboot", the device again goes into bootloop starting the cycle again
Any more suggestions guys or should i assume my Nexus to be a paperweight ?
BBThumbHealer said:
The tool specifically asks for Unlocked Bootloader and like i've already mentioned, its in a lock state. To unlock that, i need to have USB debugging enabled which i can't enable as i'm not able to even see the lockscreen, just stuck in a bootloop. :crying: I'm able to launch the Fastboot Mode and also partially unlock the bootloader but as soon as i type the command "fastboot reboot", the device again goes into bootloop starting the cycle again
Any more suggestions guys or should i assume my Nexus to be a paperweight ?
Click to expand...
Click to collapse
Go to the stock recovery and format cache.. Do it a couple of times till the /cache errors go away and then go to the bootloader and flash the stock factory images again. After flashing the stock images, don't boot it up, head over to the stock recovery and perform a factory reset and then reboot!
The tool specifically asks for Unlocked Bootloader and like i've already mentioned, its in a lock state. To unlock that, i need to have USB debugging enabled which i can't enable as i'm not able to even see the lockscreen, just stuck in a bootloop. I'm able to launch the Fastboot Mode and also partially unlock the bootloader but as soon as i type the command "fastboot reboot", the device again goes into bootloop starting the cycle again
Click to expand...
Click to collapse
You can use command in fastboot "fastboot oem unlock" to unlock then reboot in fastboot again, and try this instruction (since you unlocked you should be able to do this).
BBThumbHealer said:
The tool specifically asks for Unlocked Bootloader and like i've already mentioned, its in a lock state. To unlock that, i need to have USB debugging enabled which i can't enable as i'm not able to even see the lockscreen, just stuck in a bootloop. :crying: I'm able to launch the Fastboot Mode and also partially unlock the bootloader but as soon as i type the command "fastboot reboot", the device again goes into bootloop starting the cycle again
Any more suggestions guys or should i assume my Nexus to be a paperweight ?
Click to expand...
Click to collapse
Here:
bitdomo said:
Hi! Check this http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833.
Tapatalk-kal küldve az én Nexus 5-el
Click to expand...
Click to collapse
(BTW you dont have to reboot after bl unlock.
fastboot oem unlock
then flash stock images iwhtout reboot)
What? USB Debugging doesn't have to be enabled. Bootloader unlocking is done from fastboot via 'fastboot oem unlock'.
bitdomo said:
Here:
(BTW you dont have to reboot after bl unlock.
fastboot oem unlock
then flash stock images iwhtout reboot)
Click to expand...
Click to collapse
Bitdomo tried you awesome tool which gave me a slight hope that could revive my Nexus but sadly it didn't :crying: Memory size is matched 32G but userdata erase fails and at last the Download FAIL error is there I just don't know what is preventing the Cache and User Data to erase. Same is the case in Stock Recovery as well.
Can you please get me a solution on this. Would be highly obliged :good:
GldRush98 said:
What? USB Debugging doesn't have to be enabled. Bootloader unlocking is done from fastboot via 'fastboot oem unlock'.
Click to expand...
Click to collapse
BBThumbHealer said:
Bitdomo tried you awesome tool which gave me a slight hope that could revive my Nexus but sadly it didn't :crying: Memory size is matched 32G but userdata erase fails and at last the Download FAIL error is there I just don't know what is preventing the Cache and User Data to erase. Same is the case in Stock Recovery as well.
Can you please get me a solution on this. Would be highly obliged :good:
Click to expand...
Click to collapse
unlock bootloader: fastboot oem unlock DONT restart
download twrp recovery
boot twrp recovery: fastboot boot path_to_twrp_recovery.img
wait until it boots up, if the phone restarts try again.
in wipe settings select format data type yes then ok, if it winished slide the bar to factory reset.
and in cmd terminal type: adb shell then cat /proc/partitions and post the a screenshot about that.
bitdomo said:
unlock bootloader: fastboot oem unlock DONT restart
download twrp recovery
boot twrp recovery: fastboot boot path_to_twrp_recovery.img
wait until it boots up, if the phone restarts try again.
in wipe settings select format data type yes then ok, if it winished slide the bar to factory reset.
and in cmd terminal type: adb shell then cat /proc/partitions and post the a screenshot about that.
Click to expand...
Click to collapse
Successfully unlocked bootloader finally and installed TWRP. Booted in TWRP and performed Data Wipe and it failed. Again unable to mount /cache /persist /data etc commands showed. Then it tried formatting using make_ext4fs function but it failed. Swiped for a factory reset and it failed.
Used your ADB command afterwards and it displayed first daemon started successfully on port 5037 and then error in cmd : device not found.
What next ?
EDIT : Just noticed on the TWRP screen that my internal storage space is being shown as Zero (0) MB Now does this means my flash storage has died ? If that's the case and i need to RMA it, how to relock the bootloader , reset tamper flag and load stock recovery so that google doesn't cause any warranty issues. Please help me in that case as well.
EDIT 2 : Using fastboot, tried flash stock cache.img and userdata.img, it failed. When i flash system.img it went through perfectly. Also, got to know that the steps which you mentioned earlier, TWRP was booted temporarily and bootloader was unlocked temporarily. So does this means i don't need to relock or flash back something ? And, if i've unlocked and relocked the bootloader numerous times, how do i reset tamper flag ?
BBThumbHealer said:
Successfully unlocked bootloader finally and installed TWRP. Booted in TWRP and performed Data Wipe and it failed. Again unable to mount /cache /persist /data etc commands showed. Then it tried formatting using make_ext4fs function but it failed. Swiped for a factory reset and it failed.
Used your ADB command afterwards and it displayed first daemon started successfully on port 5037 and then error in cmd : device not found.
What next ?
EDIT : Just noticed on the TWRP screen that my internal storage space is being shown as Zero (0) MB Now does this means my flash storage has died ? If that's the case and i need to RMA it, how to relock the bootloader , reset tamper flag and load stock recovery so that google doesn't cause any warranty issues. Please help me in that case as well.
EDIT 2 : Using fastboot, tried flash stock cache.img and userdata.img, it failed. When i flash system.img it went through perfectly. Also, got to know that the steps which you mentioned earlier, TWRP was booted temporarily and bootloader was unlocked temporarily. So does this means i don't need to relock or flash back something ? And, if i've unlocked and relocked the bootloader numerous times, how do i reset tamper flag ?
Click to expand...
Click to collapse
Read the stickies in the general section.. It will tell you how to reset the tamper flag.
- Sent from an IceCold Hammerhead!
BBThumbHealer said:
Successfully unlocked bootloader finally and installed TWRP. Booted in TWRP and performed Data Wipe and it failed. Again unable to mount /cache /persist /data etc commands showed. Then it tried formatting using make_ext4fs function but it failed. Swiped for a factory reset and it failed.
Used your ADB command afterwards and it displayed first daemon started successfully on port 5037 and then error in cmd : device not found.
What next ?
EDIT : Just noticed on the TWRP screen that my internal storage space is being shown as Zero (0) MB Now does this means my flash storage has died ? If that's the case and i need to RMA it, how to relock the bootloader , reset tamper flag and load stock recovery so that google doesn't cause any warranty issues. Please help me in that case as well.
EDIT 2 : Using fastboot, tried flash stock cache.img and userdata.img, it failed. When i flash system.img it went through perfectly. Also, got to know that the steps which you mentioned earlier, TWRP was booted temporarily and bootloader was unlocked temporarily. So does this means i don't need to relock or flash back something ? And, if i've unlocked and relocked the bootloader numerous times, how do i reset tamper flag ?
Click to expand...
Click to collapse
You could try one more thing. Format the /presist partition, For some reason it magically fixed other's devices, like for this guy and for an other in that same thread, but if you format it you will lose your wifi and bluetooth mac address, and some kind of DRM stuff. I made a tutorial how to fix wifi and bluetoot mac address problem after the formating, but I cant tell anything about the drm kind of files, because I still didnt get answers form the guys in that thread. That could mean they are experiencing no problems. Here is the zip which formats persist partition.
BBThumbHealer said:
The tool specifically asks for Unlocked Bootloader and like i've already mentioned, its in a lock state. To unlock that, i need to have USB debugging enabled which i can't enable as i'm not able to even see the lockscreen, just stuck in a bootloop. :crying: I'm able to launch the Fastboot Mode and also partially unlock the bootloader but as soon as i type the command "fastboot reboot", the device again goes into bootloop starting the cycle again
Any more suggestions guys or should i assume my Nexus to be a paperweight ?
Click to expand...
Click to collapse
please quote for me to the next time.
just run "Dead_Nexus" and it's will do all the whole thing though the bootloader...
Aviatar2 said:
please quote for me to the next time.
just run "Dead_Nexus" and it's will do all the whole thing though the bootloader...
Click to expand...
Click to collapse
I tried all sort of things before finally giving up. Ultimately sent the device for RMA. Thanks for your inputs as well
@bitdomo, i have realised it was a case of dead memory chip only. I managed to relock the bootloader and reset the tamper flag (oem device info showed Tamper as "false") but now my only cause of concern is the LG Flash Tool. When i flashed the KOT9H firmware, it changed the original device version as mine came with 4.4 OOTB instead of 4.4.2. Can Google refuse the RMA citing this now ? Rest all, the kernel, recovery, bootloader, tamper flag is all stock. I coudn't even change that back to the original device version as i couldn't transfer any zip to the internal storage as it was dead.
BBThumbHealer said:
I tried all sort of things before finally giving up. Ultimately sent the device for RMA. Thanks for your inputs as well
@bitdomo, i have realised it was a case of dead memory chip only. I managed to relock the bootloader and reset the tamper flag (oem device info showed Tamper as "false") but now my only cause of concern is the LG Flash Tool. When i flashed the KOT9H firmware, it changed the original device version as mine came with 4.4 OOTB instead of 4.4.2. Can Google refuse the RMA citing this now ? Rest all, the kernel, recovery, bootloader, tamper flag is all stock. I coudn't even change that back to the original device version as i couldn't transfer any zip to the internal storage as it was dead.
Click to expand...
Click to collapse
Google can't get your actual device factory version, because it is only visible with lg flashtool, and that tool is an internal lg software. Google has nothing to with that tool.
By the way this lgfalsh tool makes your phone offical, because this is the offical tool used in LG service centres!!!!
Can you imagine a guy at google who takes your phone flashes a custom recovery, reads back the misc partition and search for the factory device version in the hex code. Then he checks your phone serial number and sees 310K then denies your rma request because your device factory version cant be that because in oktober 2013 there were no 4.4.2? I think no.
But if it bothers you then, you can flash krt16m, or if your nexus 5 had to do big update ~150 mb ota update then flash kfs78n if your device is D821 or flash kqs81m if your device is D820. Converted roms work too without problems I have tested them.
bitdomo said:
Google can't get your actual device factory version, because it is only visible with lg flashtool, and that tool is an internal lg software. Google has nothing to with that tool.
By the way this lgfalsh tool makes your phone offical, because this is the offical tool used in LG service centres!!!!
Can you imagine a guy at google who takes your phone flashes a custom recovery, reads back the misc partition and search for the factory device version in the hex code. Then he checks your phone serial number and sees 310K then denies your rma request because your device factory version cant be that because in oktober 2013 there were no 4.4.2? I think no.
But if it bothers you then, you can flash krt16m, or if your nexus 5 had to do big update ~150 mb ota update then flash kfs78n if your device is D821 or flash kqs81m if your device is D820. Converted roms work too without problems I have tested them.
Click to expand...
Click to collapse
I have already sent the defective one for RMA so there's no question of flashing any files now. Google sends the new replacement device and and lieu of that they block temporarily the device's price for a period of 14-21 days in which the service centre ppl check for the issues what got the device in. And i think LG only is handling that as it made the device ? So my question still remains now can the LG guys intimate Google that the phone was flashed. ? But on the positive, the flash tool was of LG and it can't be turned unofficial What say ? I don't wish to pay again for a new device. If the service centre guys gives a thumbs up that phone indeed died as a result of hardware failure like emmc chip, then the card block is removed.
BTW, i am not aware whether Google itself handles the service or asks LG to do the same! Any inputs ?
Android 6.0.1, build number MOB30H
I have a brand new nexus 5 that I want to root. Using ota, I accepted the system updates to 6.0.1 with the Android security patch of May 1, 2016. (not sure if that was a good idea or not but it's done now....). Now I want to root it with a twrp recovery.
Like most run of the mill users I've only rooted a device 2-3 times in my life, so my memory is rusty on how exactly to do it. I searched this forum and found many threads about this or that rooting problem which just confused me further. I know I need to unlock the bootloader and then flash a twrp recovery but I am not sure of the exact sequence of steps.
1. When I connect the nexus 5 to my windows pc using adb, it appears in Windows but the nexus 5 folder is empty. I have developer options available and usb debugging is on but I can't find where the mtp switch is.
2. Adb.
I have adb installed in Windows. The command "adb devices" returns the nexus 5 number unauthorized.
Don't know what "unauthorized" means or what to do about it.
I've done nothing further because I don't want to mess things up. Please help me resolve questions 1 and 2. Then, I presume I need to
A. unlock the bootloader
Fastboot command?
B. What's next?
Thanks for any help.
Two things, have you enabled developer options. Go to settings, about phone and tap build number 7 times. In developer options you can change USB configuration and you'll also need to enable OEM unlock. Then unlock and root your device per the guide in the general section.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Two things, have you enabled developer options. Go to settings, about phone and tap build number 7 times. In developer options you can change USB configuration and you'll also need to enable OEM unlock. Then unlock and root your device per the guide in the general section.
Click to expand...
Click to collapse
Just to add,not to confuse him even more, there is no Oem unlock option for Nexus 5
Sent from my Alps Q10101 using XDA Labs
You need to connect the phone in fastboot mode, run the command "fastboot oem unlock:, accept the agreement using the volume and power buttons, reboot into fastboot mode, flash twrp, copy the latest version of supersu.zip to the phone's internal memory, and flash supersu.zip from twrp.
You can install TWRP and root without using ADB commands.
Yes I already had developer options working and also usb debug on.
Discovered that mtp is a problem in marshmallow. I finally got file transfer working.
audit13 said:
You need to connect the phone in fastboot mode, run the command "fastboot oem unlock:, accept the agreement using the volume and power buttons, reboot into fastboot mode, flash twrp, copy the latest version of supersu.zip to the phone's internal memory, and flash supersu.zip from twrp.
You can install TWRP and root without using ADB commands.
Click to expand...
Click to collapse
Thank you very much. That is very helpful.
I didn't know you could "install TWRP and root without using ADB commands". How do you do that?
BTW, I updated the new nexus 5 to marshmallow inadvertently. When I root I'll probably use a 5.1.1 image. Good idea?
Stevica Smederevac said:
Just to add,not to confuse him even more, there is no Oem unlock option for Nexus 5
Sent from my Alps Q10101 using XDA Labs
Click to expand...
Click to collapse
Yep, my bad. Sorry about that. My 5 crapped out and have the 5x now. Amazing how fast you forget things, lol.
Sent from my Nexus 9 using XDA Free mobile app
Download and flash twrp in fastboot mode: https://dl.twrp.me/hammerhead/twrp-3.0.2-0-hammerhead.img.html
Download supersu.zip and save it to the phone's internal memory: https://download.chainfire.eu/921/SuperSU/UPDATE-SuperSU-v2.65-20151226141550.zip
Boot the phone into fasboot mode, open a command prompt, type fastboot devices and press enter. If the device is recognized, you'll see the device's serial number. Unlock the bootloader by typing "fastboot oem unlock" and use the volume/power button to accept the agreement and unlock the bootloader. Unlocking the bootloader will wipe the phone's data and cache.
To install TWRP, boot the phone into fastboot mode, connect it to the computer, open a command prompt, and type "fastboot flash recovery name-of-TWRP-file,img" and press enter. After flashing, immediately boot into recovery using the power and volume buttons, and then flash supersu.zip.
Thank you so much audit13. I really appreciate your help.
One question if I may. Reading on the web about rooting the nexus 5 running marshmallow I came across a couple of sites that said I should download and flash "ElementalX kernel and SuperSU 2.52" in addition to supersu.
I've never had to install a separate kernel when I rooted in the past. I notice you don't add flashing a kernel either. Can I ignore flashing a special kernel?
Thank you so very much for your clear instructions.
Some root methods require a rootable kernel. The latest supersu should root mm.
Thank you. Ran into a problem. That's why people like me are afraid of rooting.
Bootloader is now unlocked. Thanks.
With the N5 in fastboot mode, I connected it again with the laptop.
From the laptop command prompt I ussued "fastboot devices" and it found the phone.
Problem:
1. Fastboot flash recovery.img
(I had renamed the twrp 3.0.2 img file to recovery. Img)
Result:
unknown partition 'recovery.img'
error: cannot determine image filename for' recovery.img'
Tried by downloading a fresh copy and using its original filename.
Same result.
What am I doing wrong?
Thank you.
Found my error. I forgot the word recovery.
I now flashed twrp successfully!
When I went to flash supersu I discovered that the supersu I had downloaded was no longer in download folder. Guess it got wiped. So I rebooted into system and will download it again. Hope that does not mess up things.
Edit:
All went well. Re-downloaded SuperSU, installed fine and I'm home free.
Thank you all, especially audit13. This is a nerve-wracking process for people who only do it rarely. Glad it is over. The rest is easy!
I spoke too soon. I believe I now have a boot loop? What I have is that the horizontal turning balls of marshmallow go around forever and never finish booting.
How do I exit from this?
So close, but not there!
Edit
I rebooted into twrp, deleted cache, davlik. Still in bootloop.
Deleted data. Still in bootloop.
Help.
Reflash the entire stock rom and start over.
Try the latest beta of supersu: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Great you are still here.
Need more details.
You say reflash stock rom. Where do I get it? How do I get it into the phone? Do I flash it through twrp?
How to flash factory image: http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Factory images are here: https://developers.google.com/android/nexus/ota#hammerhead
Thank you again. Will do.
I think I know what went wrong. After I flashed twrp the phone rebooted into system before I could stop it and I think I interrupted it somewhere to return to twrp to flash Supersu. Anyway, glad I didn't brick it. Thanks again for being there.
It's morning now and after a good night's sleep I'm less rattled. Will get breakfast and start again.
I'm going out with my wife for breakfast.
I haven't followed the marshmallow threads but I recall reading about lingering problems with marshmallow. I also like to use xprivacy and gravitybox. So I'm thinking of flashing the latest 5.1.1 instead of 6. Any thoughts?
I like both ROMs but my battery life seems a bit better on MM. I'm sticking with unrooted stock ROMs on all of my phones for now.
Being a "flashaholic" is tiring!
audit13, I know you know this but it was so simple to do (once you know how.....!). It took me the whole of 20 minutes, if that, to download the files, flash 5.1.1, flash twrp and install SuperSU. Makes you wonder why I had so much trouble before!
Well when you don't know the command syntax (forget to write which partition to flash to) and are frozen with fear that you will brick the phone, it is a scary process. Once I knew how, I breezed through it. Problem is that by the next time I need to do this, I will have forgotten how or will worry that the process has changed.
I just want to thank you more than I can say for helping and hanging in while I made my mistakes. I wish there was a way I could thank you with more than words. You were great!
P.S. This time I used the beta SuperSU. Don't know if it made any difference.
Guys i have a really really big problem with mate 9 (MHA-L29). I broke both twrp and system same time (please don't ask why.)
Now, my phone don't open, just fastboot&rescue mode, useless huawei recovery (which can't format data neither install stock rom). Besides, i can't install stock rom because i tried once, and i downloaded wrong system file, and i can't format the phone now. Because of that, stock rom that i download sd card not working too. Because there is a dload file in phone.
worst of all, i can't install twrp again, because my fastboot screen tell me that: "Phone Unloced" (with red) "FRP Lock" (with green). When i try to install twrp, adb says "Failed, remote command not allowed"
Now, if can install the twrp, all my problems will be solve. There is 1 custom rom (RomAur) and 1 system backup.
How can i install twrp with this situation?
Please someone help me i spend 2 days and still nothing! How can i open this phone? Stock rom, with/without root, custom rom whatever, just tell me how can i open this phone
up
You get that command when trying to flash the wrong recovery partition, was your room nougat or Oreo based?? If nougat it's fastboot flash recovery recovery.img and Oreo fastboot flash recovery_ramdisk recovery.img I think you are trying to flash the wrong partition
shae23 said:
You get that command when trying to flash the wrong recovery partition, was your room nougat or Oreo based?? If nougat it's fastboot flash recovery recovery.img and Oreo fastboot flash recovery_ramdisk recovery.img I think you are trying to flash the wrong partition
Click to expand...
Click to collapse
No, my twrp is not wrong, i installed before, and i used long time, till broken. I installed wrong twrp recovery over correct recovery (i was trying to chance recovery because project treble). Thats why my twrp broken. Now i try to correct one, but adb says "not allowed". My custom rom nougat based.
cannurkars said:
No, my twrp is not wrong, i installed before, and i used long time, till broken. I installed wrong twrp recovery over correct recovery (i was trying to chance recovery because project treble). Thats why my twrp broken. Now i try to correct one, but adb says "not allowed". My custom rom nougat based.
Click to expand...
Click to collapse
With FRP lock you'll have to use DC-Phoenix.
But it costs €19 (For 3 days usage).
Simply put you can bypass FRP with it by force closing DC-Phoenix when it has activated the backdoor, after this you can flash anything from fastboot (until you reboot).
So you could use it to flash back TWRP.
Or you can use it to install stock firmware
ante0 said:
With FRP lock you'll have to use DC-Phoenix.
But it costs €19 (For 3 days usage).
Simply put you can bypass FRP with it by force closing DC-Phoenix when it has activated the backdoor, after this you can flash anything from fastboot (until you reboot).
So you could use it to flash back TWRP.
Or you can use it to install stock firmware
Click to expand...
Click to collapse
I will try it. Thank you very much.
cannurkars said:
Guys i have a really really big problem with mate 9 (MHA-L29). I broke both twrp and system same time (please don't ask why.)
Now, my phone don't open, just fastboot&rescue mode, useless huawei recovery (which can't format data neither install stock rom). Besides, i can't install stock rom because i tried once, and i downloaded wrong system file, and i can't format the phone now. Because of that, stock rom that i download sd card not working too. Because there is a dload file in phone.
worst of all, i can't install twrp again, because my fastboot screen tell me that: "Phone Unloced" (with red) "FRP Lock" (with green). When i try to install twrp, adb says "Failed, remote command not allowed"
Now, if can install the twrp, all my problems will be solve. There is 1 custom rom (RomAur) and 1 system backup.
How can i install twrp with this situation?
Click to expand...
Click to collapse
During startup the menu there is a option to go in Huawei e-recovery, when you are at the start up menu hold volume up for about 5 second.
ConnerZhao929 said:
During startup the menu there is a option to go in Huawei e-recovery, when you are at the start up menu hold volume up for about 5 second.
Click to expand...
Click to collapse
No it wasn't work for me. But thank for your attention. I'm glad to find a good person to help me and my problem solved about 1-2 hour ago.
Special Request
Hey ante . Is it possible to help me ? I rooted my phone 2 days back and messed it up while downloading a framework app which ended me up in a bootloop. I have been reading and following your posts of you helping others. I don't really get the steps what I should follow.
My phone is unlocked. FRP shows Unlock.
Rooted on oreo and I tried e-recovery and fastboot steps you mentioned in other threads using kernel and ramdisk etc. ( After this I have lost access to TWRP and I am simply getting EMUI Screen with options for Factory Data Reset and Wipe Cache Partition. I don't know where it is going to lead me next :-/.
Also downloaded Huawei Extractor and tried to extracted specific files but the firmware file I have doesn't have CUST.img file.
Also the site link you mentioned for download firmware is in some other language and I am unable to search for my firmware.
I also tried the placing update file in the dload on my sd card but fails at 5%. The file was correct and I am sure I did'n download the wrong firmware.
Currently it shows this on the fastboot screen.
Andorid reboot reason
: AP_S_ABNORMAL 32
NA
Just don't know what I should be doing ? PLEASE HELP BRO?
ante0 said:
With FRP lock you'll have to use DC-Phoenix.
But it costs €19 (For 3 days usage).
Simply put you can bypass FRP with it by force closing DC-Phoenix when it has activated the backdoor, after this you can flash anything from fastboot (until you reboot).
So you could use it to flash back TWRP.
Or you can use it to install stock firmware
Click to expand...
Click to collapse
AniMaL92 said:
Hey ante . Is it possible to help me ? I rooted my phone 2 days back and messed it up while downloading a framework app which ended me up in a bootloop. I have been reading and following your posts of you helping others. I don't really get the steps what I should follow.
My phone is unlocked. FRP shows Unlock.
Rooted on oreo and I tried e-recovery and fastboot steps you mentioned in other threads using kernel and ramdisk etc. ( After this I have lost access to TWRP and I am simply getting EMUI Screen with options for Factory Data Reset and Wipe Cache Partition. I don't know where it is going to lead me next :-/.
Also downloaded Huawei Extractor and tried to extracted specific files but the firmware file I have doesn't have CUST.img file.
Also the site link you mentioned for download firmware is in some other language and I am unable to search for my firmware.
I also tried the placing update file in the dload on my sd card but fails at 5%. The file was correct and I am sure I did'n download the wrong firmware.
Currently it shows this on the fastboot screen.
Andorid reboot reason
: AP_S_ABNORMAL 32
NA
Just don't know what I should be doing ? PLEASE HELP BRO?
Click to expand...
Click to collapse
What's your firmware now?
You can get that info in Fastboot using
Code:
fastboot oem get-product-model
fastboot oem get-build-number
Since your recovery and fastboot still functions you probably will only need to use HWOTA to get back to stock.
It can be found here: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
But post your cust/build before proceeding.
Also cust.img is found in UPDATE.APP in the hw data zip.
Problem Solved - Somewhat
Hey ante. Thanks for the promt reply. I got it solved by using CHIMERA tool.
Would like to suggest others also stuck with same issue to use CHIMERA.
Note - It is a paid tool and 100% legit and it can help with all problems related to FRP, Bootloader Lock / Unlock & also flashes back to factory firmware.
However what I am facing now I have flashed another version of firmware which isn't my region and some features of my phone like fingerprint scanner and other things are not working but phone is back to live. So Im glad and looking forward to searching for clean Oreo Firmware for my region to flash using CHIMERA Again.
Also, the sick and stupid part of it. I went to the service center and a person non-technical told me straight that you lost your device and it's of no use now. We cannot fix such issues 99% but I'll still ask my team and let you know after 3 days.
Thank God I didn give them and wasted my time and money.
As soon as I returned, I followed up to things and got it done myself. :good:
Anybody can possibly suggest a official firmware Oreo EMUI for Middle East Region!? If not which one can be flashed instead and where to download from?
As there seems to be no such guide yet and it took me quite a while to get all this information together, I thought of giving back something by putting information together for others to start.
This guide is meant for the CLT-L29 (dual SIM). Rebranding and switching your CLT-L09 (single SIM) to dual is not subject of this guide and is not adviced.
This is for a Huawei P20 Pro CLT-L29 with factory reset. Please bear with me if there really is a step missing as I try to reproduce this for the documentation with an already bootloader unlocked and previously rooted phone (root should be gone after [factory] resetting via eRecovery).
A collection of all tools used can be found here.
As always, you are doing this on your own risk, no one else can be held responsible for this.
Cheat sheet
eRecovery
The recovery sitting in the "recovery" partition. eRecovery is Huawei's recovery that is able to fix your phone by downloading the latest OTA update via WiFi if you got stuck in a boot loop for several reasons.
To boot into eRecovery:
Power down your phone (if you are stuck in a boot loop simply continue with the next step).
Hold volume up until you end up in eRecovery.
Setup your WiFi access and let it recover your phone.
If unsure, "wipe data/factory reset" to get rid of any leftovers you messed up.
Reboot and be happy that you have not fully bricked your phone.
TWRP
The recovery typically flashed to the "recovery_ramdisk" partition. TeamWin Recovery Project is what you typically use to flash ROMs, to root the phone and to install OTA updates.
Do NOT flash TWRP into "recovery" partition or you will lose eRecovery and the ability to easily recover your semi-bricked phone via WiFi!
To boot into TWRP (once flashed):
Power down your phone (if you are stuck in a boot loop simply continue with the next step).
Hold volume up and power until you end up in TWRP.
Unlock your bootloader
Get your bootloader unlock code from here https://emui.huawei.com/en/unlock_detail (available until mid of July I think). Some report to have to wait 24/48h to get their code via mail, I got mine directly.
Register via mail and do not get confused that you can not select USA or Germany or whatever country, simply use location Hong Kong.
Make sure you select "EMUI above 5.0" when entering your phone data (P20 Pro comes with EMUI 8.x).
Connect your phone via ADB. There are tons of HowTos about this, so I will not be covering this here.
Use Tool All In One to check that you can talk to your device via ADB. It will also help you installing the correct ADB USB drivers.
Unlock your bootloader using Tool All In One.
Reboot back into system.
Flash TWRP
Make sure no lock screen or other locking is set:
"Settings > Security": Remove fingerprint, face or password locking, simply set to none.
Enter developer mode, should already been done for unlocking the bootloader.
Setting > System > Developer options: Disable the display lock.
Download latest ADB & Fastboot as I will continue with the rest on command line.
Verify connection to your phone with "adb devices", this should list your phone.
Reboot into fastboot by using "adb reboot bootloader".
Verify connection to your phone with "fastboot devices", this should list your phone.
Flash TWRP by Pretoriano80 with "fastboot flash recovery_ramdisk twrp_clt_0.1.img". This TWRP is able to access the encrypted internal storage! TWRP is flashed to "recovery_ramdisk". This ensures that you can still access eRecovery if something goes wrong.
Remove the USB cable.
Reboot into TWRP. If you do not boot directly into TWRP the Huawei eRecovery might replace TWRP again. Once you booted into TWRP you are fine for future reboots.
Use "Keep Read Only" for the system partition.
Make a backup!!!
Backup your phone to internal storage (USB stick via USB-OTG adapter failed for me):
Select "Backup".
Tick all partitions (scroll down and tick all).
Swipe to Backup.
Select "Reboot System", "Do Not Install".
Back in Android make a copy of your backup located in your internal storage "/TWRP/" to an external location like your PC. Keep the backup on your phone to be able to go back quickly to this point via TWRP.
Root the stock ROM
Place "Magisk-v16.4-Beta.zip" onto the internal storage.
Power off the phone and remove the USB cable.
Boot into TWRP.
Install root and Magisk Manager:
Select "Install".
Select "Magisk-v16.4-Beta.zip"
Tick "Reboot after installation is complete".
Swipe to confirm Flash.
Select "Do Not Install".
Back in Android start "Magisk Manager" and check that it is green and therefore rooted.
Install an OTA (Over The Air) stock update
PC method
Method involving ADB based on this guide.
First make sure no OTA update gets installed automatically as this will end up in booting into TWRP and failing with the update.
Go to "Settings > System > System Update".
Open the three dots menu on the top right and select "Update Settings".
Disable automatic update download via WiFi as once updates are downloaded the phone will bug you to update and maybe tries to update itself during the night!
Start in Android but do not download the OTA update yet.
Verify connection to your phone with "adb devices", this should list your phone.
Reboot into fastboot by using "adb reboot bootloader".
Verify connection to your phone with "fastboot devices", this should list your phone.
Flash "recovery_ramdisk_nocheckP20.img" with "fastboot flash recovery_ramdisk recovery_ramdisk_nocheckP20.img". For official OTA updates that you would regularly get, the "nocheck" feature should not be needed but does not harm. This will remove TWRP and you have to flash it again after the OTA update has finished.
Reboot into Android by using "fastboot reboot".
Remove the USB cable.
Download your OTA update via "Settings > System > System Update".
Let the phone reboot to install the OTA update and follow the update until you are back in Android with your new firmware version.
Install TWRP and root again.
Standalone method
Deprecated/wrong method based on this guide.
Read first!!!
While this method should do no harm it will only ever update to CLT-L29 8.1.0.128a(C432) [hw/eu] as this is what is inside the file "update.zip" that you can currently download and that gets installed by "HuRUpdater_0.3.zip" in the same folder. This was not clearly explained in the source thread, therefore sorry about this wrong information. If you intend to update to this stock ROM continue, otherwise use the "PC method".
I will check about the best way to install OTA updates without PC interaction in the next couple of days (currently waiting for 130+ getting rolled out for me for some investigations regarding the OTA process).
First make sure no OTA update gets installed automatically as this will end up in booting into TWRP and failing with the update.
Go to "Settings > System > System Update".
Open the three dots menu on the top right and select "Update Settings".
Disable automatic update download via WiFi as once updates are downloaded the phone will bug you to update and maybe tries to update itself during the night!
Place the following files into a folder on the internal storage (for sure not all are required but this is part of the little information not clear right now):
"HuRUpdater_0.3.zip"
"recovery.img"
"update.zip"
"update_all_hw.zip"
"update_data_public.zip"
Go to "Settings > System > System Update" and check for an update.
Download the OTA update.
Do not reboot when prompted.
Make sure no lock screen or other locking is set:
"Settings > Security": Remove fingerprint, face or password locking, simply set to none.
Enter developer mode, should already been done for unlocking the bootloader.
Setting > System > Developer options: Disable the display lock.
Power down the phone.
Boot into TWRP.
Install "HuRUpdater_0.3.zip". Do not get irritated if it tells you it is for CLT-L09 instead of CLT-L29, everything is fine.
Wipe dalvik cache before rebooting.
Reboot back into Android.
Check "Magisk Manager" to see if root got removed. TWRP might get removed as well. If TWRP or root got removed, repeat the install for one or both like before.
In my case only root got removed but TWRP was kept functional. If this is the case for you as well, simply flash "Magisk-v16.4-Beta.zip" via TWRP again.
Changelog
2018-06-21
Updated/corrected wrong information collected about installing OTA updates standalone (without PC). Until further notice use the PC method.
Great post. Thank you
Very good post!
Thank you to collect all this important info!
[emoji481]
P20 Pro & Tapatalk
can i use your step above to rebranding from L29c636 to l29c432? Thanks
Barcovn said:
can i use your step above to rebranding from L29c636 to l29c432? Thanks
Click to expand...
Click to collapse
Not sure, not tested and not topic of this thread.
For my understanding, why do you want to rebrand it to C432 which is the region code as far as I understand.
Is there a BIG benefit of getting OTA updates earlier or why do you want to mess around with it ?
Xcelsior said:
Not sure, not tested and not topic of this thread.
For my understanding, why do you want to rebrand it to C432 which is the region code as far as I understand.
Is there a BIG benefit of getting OTA updates earlier or why do you want to mess around with it ?
Click to expand...
Click to collapse
yes, i mean change the region code. as i use the p20 pro since April, newer firmware ususal fix/improve performance for phone or camera. however it seem the c636 update is much slower then C432. currently i have problem with facebook lagging which inhope newer firmware fix it
This is good! I'll sticky it when I get a chance later tonight. I'm mobile atm
Maybe I'm missing something.
https://forum.xda-developers.com/hu...de-how-to-root-debrand-remove-retail-t3788326
It's been here for some time.
Nothing wrong with your guide it's decent but the info provided is actually already here mate.
Root, twrp, de-brand, OTA, it's all there
dladz said:
Maybe I'm missing something.
https://forum.xda-developers.com/hu...de-how-to-root-debrand-remove-retail-t3788326
It's been here for some time.
Nothing wrong with your guide it's decent but the info provided is actually already here mate.
Root, twrp, de-brand, OTA, it's all there
Click to expand...
Click to collapse
They're a bit different. The debrand thread is obviously good but much more specific to debranding. This is a more generic for general How-To's
dladz said:
Maybe I'm missing something.
https://forum.xda-developers.com/hu...de-how-to-root-debrand-remove-retail-t3788326
It's been here for some time.
Nothing wrong with your guide it's decent but the info provided is actually already here mate.
Root, twrp, de-brand, OTA, it's all there
Click to expand...
Click to collapse
I was reading this one as well but like matt4321 already said, it is actually for a different purpose.
And even the "ROOT ONLY" instructions are either widespread over the whole P20 Pro forum, incomplete or even outdated:
Linking to other threads with endless, partly revised instructions (on page n of the thread).
Referring to wrong official TWRP that can not use internal storage.
Hard to understand for beginners on this device (not even talking about someone who is entirely new to all of this).
Missing steps or expecting that you have already successfully flashed your first ROM (talking about advanced things like rebranding).
Don't get me wong, I am used to read a lot when it comes to custom ROMs (if you check the old part of my signature you can see that I am not actually a newbie here and my roots actually reach back to when all of the Android stuff startet at all, back when XDAs flashed HTC HD2 WinMo to Android). However I really missed a guide that actually collects all the basic information for beginners without going off roads too early.
These are more or less the steps I'm used to when I owned my nexus phones.
I have some questions:
If I root my phone and install, let's say adaway, will I be able to receive OTA? Or I will have to flash a new image manually?
If after root I relock bootloader, will I be able to unlock it again later for further modding?
This method implies that I can return to stock anytime and relock bootloader?
Thanks for the guide and answers , great job
mangusZen said:
If I root my phone and install, let's say adaway, will I be able to receive OTA? Or I will have to flash a new image manually?
Click to expand...
Click to collapse
Yes, exactly what I am doing. I need root for some apps and besides that I am happy with the stock OTA ROM, at least for the moment. OTA updates work fine so far.
The only thing as explained in my guide is that OTA updates will fail as they boot into TWRP instead of original fastboot. Therefore you need to explicitly boot into TWRP and install the downloaded OTA update with "HuRUpdater_0.3.zip".
mangusZen said:
If after root I relock bootloader, will I be able to unlock it again later for further modding?
Click to expand...
Click to collapse
From what I have read so far re-locking your bootloader is not advised. You seem to be unable to unlock it again or at least need to request another unlock code from Huawei.
At least this is my understanding of the situation so far.
mangusZen said:
This method implies that I can return to stock anytime and relock bootloader?
Click to expand...
Click to collapse
Returning to stock is even easier if you keep eRecovery working as explained in the guide (flashing TWRP only to recovery_ramdisk partition). With eRecovery you can wipe TWRP and root and let eRecovery download and install the latest official stock ROM.
Regarding the bootloader re-locking, see my answer above.
Xcelsior said:
Yes, exactly what I am doing. I need root for some apps and besides that I am happy with the stock OTA ROM, at least for the moment. OTA updates work fine so far.
The only thing as explained in my guide is that OTA updates will fail as they boot into TWRP instead of original fastboot. Therefore you need to explicitly boot into TWRP and install the downloaded OTA update with "HuRUpdater_0.3.zip".
From what I have read so far re-locking your bootloader is not advised. You seem to be unable to unlock it again or at least need to request another unlock code from Huawei.
At least this is my understanding of the situation so far.
Returning to stock is even easier if you keep eRecovery working as explained in the guide (flashing TWRP only to recovery_ramdisk partition). With eRecovery you can wipe TWRP and root and let eRecovery download and install the latest official stock ROM.
Regarding the bootloader re-locking, see my answer above.
Click to expand...
Click to collapse
Ok, so to install OTA I have to use hurupdater method and flash the OTA package manually.
For what I read and understood, but I may be wrong, the problem with relocking bootloader is encountered by who used the funkyhuawei method, that alters bootloader in some way, especially to achive the mono sim - dual sim switch.
With this you cant for now re unlock the bootloader again.
But I could be wrong and be like that for everyone, will see if someone will come up with some clarifications.
It would be nice to have the ability to return to stock, lock bootloader and use warranty
[emoji14]
Thanks for your work and answers
mangusZen said:
Ok, so to install OTA I have to use hurupdater method and flash the OTA package manually.
Click to expand...
Click to collapse
Yes, that is basically what "HuRUpdater_0.3.zip" will do, it will flash/install an OTA update that has previously been downloaded.
Wipe cache afterwards and be happy with your new up to date stock ROM version.
Xcelsior said:
Yes, that is basically what "HuRUpdater_0.3.zip" will do, it will flash/install an OTA update that has previously been downloaded.
Wipe cache afterwards and be happy with your new up to date stock ROM version.
Click to expand...
Click to collapse
I have to rename the downloaded OTA packages for huru to work, right?
mangusZen said:
I have to rename the downloaded OTA packages for huru to work, right?
Click to expand...
Click to collapse
Not for me. Just downloaded the OTA update via the EMUI system menu in Android, rebooted into TWRP and installed (aka executed) HuRu.
HuRu did the rest for me.
Tested with 120 -> 128 OTA update.
Hi It is late at night and I am not sure if I typed fastboot flash recovery twrp_clt_0.1.img instead off fastboot flash recovery_ramdisk twrp_clt_0.1.img. How can I make sure I still have erecovery? super newbie to android rooting, please help Thank you
Amowiel said:
Hi It is late at night and I am not sure if I typed fastboot flash recovery twrp_clt_0.1.img instead off fastboot flash recovery_ramdisk twrp_clt_0.1.img. How can I make sure I still have erecovery? super newbie to android rooting, please help Thank you
Click to expand...
Click to collapse
Simplest way would be to try to boot into eRocovery:
Power off the phone.
Power on the phone until you see the "you are a baddy because you unlocked your bootloader" screen.
Hold volume up (you can already hold it when powering on the phone) until you end up in eRecovery or TWRP.
If you end up in TWRP it should still be possible to recover your eRecovery with a proper backup of the "recovery" partition from any other P20 Pro.
Xcelsior said:
Simplest way would be to try to boot into eRocovery:
Power off the phone.
Power on the phone until you see the "you are a baddy because you unlocked your bootloader" screen.
Hold volume up (you can already hold it when powering on the phone) until you end up in eRecovery or TWRP.
If you end up in TWRP it should still be possible to recover your eRecovery with a proper backup of the "recovery" partition from any other P20 Pro.
Click to expand...
Click to collapse
thank you so much for such a quick reply, can confirm that my brain was not so fried and I didn't wipe my ercovery
thank you for your amazing guide, everything worked perfectly
mangusZen said:
Ok, so to install OTA I have to use hurupdater method and flash the OTA package manually.
For what I read and understood, but I may be wrong, the problem with relocking bootloader is encountered by who used the funkyhuawei method, that alters bootloader in some way, especially to achive the mono sim - dual sim switch.
With this you cant for now re unlock the bootloader again.
But I could be wrong and be like that for everyone, will see if someone will come up with some clarifications.
It would be nice to have the ability to return to stock, lock bootloader and use warranty
[emoji14]
Thanks for your work and answers
Click to expand...
Click to collapse
Actually you don't in some cases, if your simply rooted with twrp and you want to install an OTA that's been advertised to your device. All you need to do is install the nocheck recovery IMG and then take the update, reinstall twrp and magisk after the update and you're done.
If it's an update that's not advertised to your device yet then hur updater is the way.
I spent all day trying to find a way to root my phone after moving from Lineage OS to Oxygen OS 10.01. Namely, https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853.
The problem is that the information given is out of date as of a few days ago, and installing the patched bootloader broke wifi, calling, and probably all sorts of other things.
I want to make sure this is as simple as possible for people having the same issues!
Before You Download
You MUST be running Oxygen OS 10.01 exactly.
You MUST be on a OnePlus 6 (not a OnePlus 6T)
You MUST have an unlocked bootloader (Google for instructions, "fastboot oem unlock", this will require a factory reset)
Install ADB and Fastboot on your computer (Google for instructions)
Installation Instructions
Make sure you're running Oxygen OS 10.01 for the OnePlus 6. If you're on an earlier version and need to install, download HERE and install it as a local upgrade (Google for instructions).
Download and install Magisk Manager. I'm using Version 7.40.
Download my modified boot image here
Put your OnePlus 6 in Fastboot mode and plug it into your computer (Google for instructions)
Place my boot file, new_boot_image_xda.img, in the same folder Fastboot is running
Run fastboot flash boot new_boot_image_xda.img
Run fastboot reboot or otherwise reboot your phone.
If you want to do this on other devices:
Extract boot.img from your ROM's zip file's payload.bin using Payload Dumper 64 (I can't post external links, Google it)
Place boot.img in your phone's local storage
Open Magisk Manager on Android, then "Install Magisk" -> "Patch a File" -> select boot.img
Move the modified boot image (magisk_patched.img) to your computer
Enter the fastboot commands from above, replacing new_boot_image_xda.img with your modified boot image
May be a dumb question: Do I lose data? There's no step of wiping, but I'm afraid this may be necessary.
Oh, and another question: how about updates? Will I lose my data on further updates?
And I'm sure I need to unlock my bootloader before.
jacdelad said:
May be a dumb question: Do I lose data? There's no step of wiping, but I'm afraid this may be necessary.
Oh, and another question: how about updates? Will I lose my data on further updates?
And I'm sure I need to unlock my bootloader before.
Click to expand...
Click to collapse
Unlocking the bootloader triggers a factory reset (nothing in internal storage is lost, but you lose apps and settings), and you need to do this before rooting. If your bootloader is unlocked, you shouldn't have to wipe anything unless you miss an instruction or install it on the wrong version. You won't be able to update OTA without losing root.
If you're new to rooting, just be prepared to lose your data no matter what, because it's incredibly easy to follow the wrong advice and end up bricked. There have been times where the only thing my OP6 can do is display a white LED because with the wrong command, I wiped everything from the boot partition, recovery partition, and internal storage. For that reason, you might wait a week or so for more documentation on rooting this phone with this version of OOS.
mouthofrandom said:
Unlocking the bootloader triggers a factory reset (nothing in internal storage is lost, but you lose apps and settings), and you need to do this before rooting. If your bootloader is unlocked, you shouldn't have to wipe anything unless you miss an instruction or install it on the wrong version. You won't be able to update OTA without losing root.
If you're new to rooting, just be prepared to lose your data no matter what, because it's incredibly easy to follow the wrong advice and end up bricked. There have been times where the only thing my OP6 can do is display a white LED because with the wrong command, I wiped everything from the boot partition, recovery partition, and internal storage. For that reason, you might wait a week or so for more documentation on rooting this phone with this version of OOS.
Click to expand...
Click to collapse
Nah, no problem. I have this phone since it came out and use custom ROMs since then, do not really new. I know that unlocking the bootloader resets my phone. I was just wondering if I can install your image without unlocking, because I'm currently locked (had a problem with the latest Syberia update and choose to stay with OOS). And how to update when OOS 10.0.2 arrives.
I tried it and it worked fine, but today after uninstalling some blotware and rebooting I am stucked on the bootloader warning page which takes me to the fastboot mode after a minute or so (this is what used to happen to me whenever I flash a magisk patch boot file) Now I'm downloading the stock rom to get the stock boot.img.
This one video is for oneplus 6t
Pretty clean guide