1020 bluetooth - Nokia Lumia 1020

I cant use bluetooth.
If i put bluetooth on and try to add new device, then phone says "unable to connect please push bluetooth on..."
I can pair 1020 from computer bluetooth ok.
Is this driver or hardware problem?

Just try a Soft Reset and see if it works..mine did.
fully shutdown your phone and while turning it back on first hold the volume (-) then power until the NOKIA logo shows up.
Then head up to the bluetooth setting and check whether it worked or not.

I am facing the exact same problem tried everything soft reset, hard reset, install everything from scratch cant make it work with latest stable release of win10 any help would be appreciated.

The Bluetooth issue was quite simple really but at the same time not fixable without getting your hands dirty.
Here's what you do
1 Put your phone into mass storage mode and load the system registry hive
Or use an in phone Registry editor
2 Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\bthserv
3 Change the Start Value from 3 or whatever it is to 2
4 Restart your phone and that should be all.

what about hotspot?
can u fix it?

amr h said:
what about hotspot?
can u fix it?
Click to expand...
Click to collapse
whats the problem with hotspot ? i am not using it so i dont know if its good or not tell me and ill look into it.

it is working only 5 sec!!!

amr h said:
it is working only 5 sec!!!
Click to expand...
Click to collapse
I have tried to find something relative and i could not, it must be more complicated than a simple registry fix and its out of my knowledge's range.
My best suggestion is to change your phone's registry to 950 XL and try the last Fall creators update, it seemed to have fixed all the issues for most of people.

amr h said:
it is working only 5 sec!!!
Click to expand...
Click to collapse
To whoever still facing hotspot problems i found the bizarre solution, Delete all saved wifi networks from your phone, restart, start hotspot, works perfectly.

ssmb212 said:
2 Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\bthserv
3 Change the Start Value from 3 or whatever it is to 2
4 Restart your phone and that should be all.
Click to expand...
Click to collapse
Hello!
Didn't work for me. I already had value 2, but Bluetooth wasn't working.
Can anyone advize anything else? Maybe even a rom with working Bluetooth.
Thanks.

dmkovtun said:
Hello!
Didn't work for me. I already had value 2, but Bluetooth wasn't working.
Can anyone advize anything else? Maybe even a rom with working Bluetooth.
Thanks.
Click to expand...
Click to collapse
Try the other values 0 1 3 4 then

ssmb212 said:
Try the other values 0 1 3 4 then
Click to expand...
Click to collapse
That worked! Start value "3" made bluetooth working again. Thanks!

I have the same problem when adding devices does not leave me. already probe with the modification in the registry. but it is still the same. Does anyone have any other solution?

Related

hsdpa and wifi/bluetooth enabling

hi im havng problems enabling wifi. but i have realised when hsdpa is enable wifi can not be turned on is this normal. when i disable hsdpa wifi can be enabled. is this correct?
No this is not normal. They should both work. Can you give us any more info, ie. did it ever work? Have you tried a hard reset?
hi,
just found out that my camera doesnt work now! did work b4. yes hspda did work b4 with wifi i have hard reset a few days ago. should i hard reset it again?
rom 1.25.405.1 WWE
radio 1.58.21.23
has anyone found a reason why wifi cannot be turned on??? min use to work fine and now it doesnt switch on i have hard reset it has made no difference,
intrancer said:
has anyone found a reason why wifi cannot be turned on??? min use to work fine and now it doesnt switch on i have hard reset it has made no difference,
Click to expand...
Click to collapse
Are you sure you have performed a HARD reset. A hard reset means that your device is in the same state as when you first took it out of the box.
If then the WIFI fails to switch on, you probably have a hardware problem and should send the device for repairs.
I have had a problem with the WIFI function as well. In my case it was caused by a program which allows the Cruise to act as a WIFI access point. After using that software once, the WIFI cannot be switched on any more. I have had the same problem on my "standard" Touch.
Robin
hi mate,
yes i it is a hard reset everything deleted and restored to orignal state. looks like i need to contact HTC. did u send yours in for repair or did the hard reset resolve the issue?
the strange thing is the wifi did work before
intrancer said:
hi mate,
yes i it is a hard reset everything deleted and restored to orignal state. looks like i need to contact HTC. did u send yours in for repair or did the hard reset resolve the issue?
the strange thing is the wifi did work before
Click to expand...
Click to collapse
In my case the hard reset resolved the issue both on my original touch and on my touch cruise. The latter needs to go back for repairs now anyway because the speaker has decided not to function anymore.
Robin
intrancer said:
has anyone found a reason why wifi cannot be turned on??? min use to work fine and now it doesnt switch on i have hard reset it has made no difference,
Click to expand...
Click to collapse
I'm having a similar problem on my Cruise. My WiFi is switching on in the Comm Mgr. I see the icon working for a couple of seconds then it seems to freeze. I try to sign in on Skype or access an Internet site with no success. Strange. It was working a couple of days ago.
Am at the moment using a Laptop via a WiFi connection, so it's not a general WiFi connection problem.
Appreciate some advice.
Hi
Just a quick extra comment to my question above. Would a Hard Reset really help? Or is this just an option to find a solution?
hi i called htc and returned the device for repair i will update on the progress

WiFi can't turns on with first touch

how to solve this problem? replaced fw_dcr_1150_sta TiwlnapiCE.dll tnetwln.dll WiFiInit.exe WirelessService.dll?
i can only say you should touch twice instead of modifing files
its a safer option
Realy no solution?
Well, here the same anoying problem... Is there a solution?
Now I need to start my commanager, touch wifi before I see wifi in other programs like SPB Phonesuite, SBSH phonewheaver, etc...
It's a problem with every WM 6+ ROM i've used so far (over 10 diffirent).
Now using WM 6.1 CE OS.19588 from Diamond - CLEAN *FAST!*
I notice the same problem, i have to tap twice to activate Wireless.
I'm using Cloud Nine rom V0.9b, i tried other rom (XDA Mobile 6 Release 5 FINAL - Full), and it works fine.
Go to the windows directory. Copy wifi_init to your startup folder. Problem solved.
Reg fix
Wifi. init sometimes doesn't work for me, so I change
\\\registry\HKLM\Comm\TNETWLN1\Parms\HTCPreloadWifi
value to 1.
Ixtana_ran said:
Wifi. init sometimes doesn't work for me, so I change
\\\registry\HKLM\Comm\TNETWLN1\Parms\HTCPreloadWifi
value to 1.
Click to expand...
Click to collapse
Indeed, both should be done.
TY !
jwzg said:
Indeed, both should be done.
Click to expand...
Click to collapse
Thanks guys.
I needed to use the RegFIX & the shortcut. But now it works greet.
Thanks
I also copied the wifi_init link to the startup folder and i did the reg-fix on WM 6.1 CE OS.19588 from Diamond - CLEAN *FAST!*, but when I set HTCPreloadWifi to 1 I can't get my Wifi to start at all anymore!
Anyone got a solution for that? It's strange that it did solve the problem for some1 else in this topic with the same rom. Maybe I will try a hard reset tonight. It's not a big problem but it kinda annoys me
EDIT: Ok, I did a hard-reset last night, and now it works perfect after applying the reg-fix. WIFI turns on after a reset at once.
So I guess it had something to do with the programs I installed, or maybe I changed the registry. I'm going to install the programs again, one by one, and then check if WIFI is still good.
Ixtana_ran said:
Wifi. init sometimes doesn't work for me, so I change
\\\registry\HKLM\Comm\TNETWLN1\Parms\HTCPreloadWifi
value to 1.
Click to expand...
Click to collapse
why i cant turn on wifi using that solution..plz help me

Bluetooth apk

Can anyone tell me which bluetooth apk controls pairing and phonebook downloads, and if there is any way to edit it
Thanks
nope
you cannot change the bluetooth file. once its made its made. you would have to make your own and to know all the codes you would need to be a developer. and why would you even want to change bluetooth files?
jordan5555 said:
you cannot change the bluetooth file. once its made its made. you would have to make your own and to know all the codes you would need to be a developer. and why would you even want to change bluetooth files?
Click to expand...
Click to collapse
I have a uconnect car bluetooth, had problems with phonebook downloading, so I renamed bluetoothpbab and no more problems, doesnt even ask to allow phonebook access. Just curious as to what's in the apk
nmandi said:
I have a uconnect car bluetooth, had problems with phonebook downloading, so I renamed bluetoothpbab and no more problems, doesnt even ask to allow phonebook access. Just curious as to what's in the apk
Click to expand...
Click to collapse
I'd really like to know how to read bluetoothpbap.apk if anyone can help
I seem to be having the same problems as you have and am curious if you have had luck resolving them. My Bluetooth won't download the phonebook and frequently disconnects after trying (paired to my car).
I have tried re-pairing and updated my ROM to Phoenix 4.1 when it came out. I didn't have this issue with the stock ROM but it started happening in Phoenix 3.5 and continues in 4.1. This is my only problem with Phoenix and I'd really like to have it fixed.
darkfus said:
I seem to be having the same problems as you have and am curious if you have had luck resolving them. My Bluetooth won't download the phonebook and frequently disconnects after trying (paired to my car).
I have tried re-pairing and updated my ROM to Phoenix 4.1 when it came out. I didn't have this issue with the stock ROM but it started happening in Phoenix 3.5 and continues in 4.1. This is my only problem with Phoenix and I'd really like to have it fixed.
Click to expand...
Click to collapse
Do you have root explorer, if you do, go to /system/app/bluetoothpbap.apk and rename to bluetoothpbap.apk.bak. reboot your phone and pair again with your car. It worked for me. Let me know if it works for you
nmandi said:
Do you have root explorer, if you do, go to /system/app/bluetoothpbap.apk and rename to bluetoothpbap.apk.bak. reboot your phone and pair again with your car. It worked for me. Let me know if it works for you
Click to expand...
Click to collapse
I tried your fix and gave it a day or two to make sure it kept working every time. It does! Thanks!
I am not sure what that module does, but I'm not missing anything noticeable. Thanks Again!
darkfus said:
I tried your fix and gave it a day or two to make sure it kept working every time. It does! Thanks!
I am not sure what that module does, but I'm not missing anything noticeable. Thanks Again!
Click to expand...
Click to collapse
Happy it worked for you
Sent from my SGH-I897 using XDA App

Problem with 3G/data

I have an Oneplus one that often lose contact with the data and 3G, if there is 4G there is problem. This happend when I am outside a town on the country(which always have worked before).
Anyone here know if it is a common problem and what to do?
Are you still on stock software? Or running a custom ROM?
I have been getting this issue and my fix is to reboot the phone, if you try airplane mode or toggling data, it doesnt fix it. Reboot brings the data back. I think it could be modem related.
donk165 said:
Are you still on stock software? Or running a custom ROM?
I have been getting this issue and my fix is to reboot the phone, if you try airplane mode or toggling data, it doesnt fix it. Reboot brings the data back. I think it could be modem related.
Click to expand...
Click to collapse
I am on Linage Rom right now.
I tried to install another modem and now the sound is really bad when I am speaking in a call, people say that they dont hear what I say.
I have tried to install other modems for OPO but no one works like the one I had first, anyone here know which modem that works for 7.1, becuase I cant speak anymore with the phone.
I have tried to install a new rom but it seems that the wrong modem is still in use.
I'm not sure which is best TBH. When I had this issue, I flashed back to stock software, and then once I was back on stock, I reinstalled the ROM I was using before and this fixed my issue. But I do still get the mobile data cutting out from time to time, but not as frequently as before.
Try posting in the modem thread and see if people in there can advise you.
@Peterrrrr said:
I am on Linage Rom right now.
I tried to install another modem and now the sound is really bad when I am speaking in a call, people say that they dont hear what I say.
I have tried to install other modems for OPO but no one works like the one I had first, anyone here know which modem that works for 7.1, becuase I cant speak anymore with the phone.
I have tried to install a new rom but it seems that the wrong modem is still in use.
Click to expand...
Click to collapse
Look for firmwares compatible with your ROM--start here:
https://forums.oneplus.net/threads/list-oneplus-one-firmwares-modems.421783/
Or flash a new ROM.
Or go back to your old one and start fresh.
pbergonzi said:
Look for firmwares compatible with your ROM--start here:
https://forums.oneplus.net/threads/list-oneplus-one-firmwares-modems.421783/
Or flash a new ROM.
Or go back to your old one and start fresh.
Click to expand...
Click to collapse
Aldready tried all the firmwares and also did an reset to stock and locked bootloader, the problems is still the same
Besides the APN, are there any other settings for the modem that can affect the sound from my microphone in calls?
@Peterrrrr said:
Aldready tried all the firmwares and also did an reset to stock and locked bootloader, the problems is still the same
Besides the APN, are there any other settings for the modem that can affect the sound from my microphone in calls?
Click to expand...
Click to collapse
You've been busy.
There is a "mic fix" somewhere around--a little searching will find it and other ideas.
Good luck.
Tried both mic fixes, neither of them worked
This works for me:
https://vcillusion.wordpress.com/20...n-low-mic-during-call-problem-in-oneplus-one/
I've had this mobile data issue since the official COS 13.1 came out. To fix it you can only reboot. I've tried multiple solutions but nothing works.
I'm currently running the latest LineageOS Nightly and still have that, it's a PITA but I can live with it.
I wasn't able to find the conditions in which this bug happens, but it usually happens to me when I get out of the home with the WiFi turned on and connected
---------- Post added at 10:59 AM ---------- Previous post was at 10:54 AM ----------
@Peterrrrr said:
Tried both mic fixes, neither of them worked
Click to expand...
Click to collapse
Edit the following files
/system/build.prop
ro.qc.sdk.audio.fluencetype=fulence
Change to
ro.qc.sdk.audio.fluencetype=none
/system/etc/audio_platform_info.XML
SND_DEVICE_IN_HANDSET_MIC
Change the value from 40 to 4
This will solve your issues with the mic.
I have tried them, it works edit bild.prop, but when edit the other file the rom crashes
@Peterrrrr said:
I have tried them, it works edit bild.prop, but when edit the other file the rom crashes
Click to expand...
Click to collapse
Do you have some custom audio mods on your device such as Dolby atmos or stuff like that?
Viper4rise
@Peterrrrr said:
Viper4rise
Click to expand...
Click to collapse
Maybe it's related, and Viper handles that file while you try to edit it. I never used that and this fix I suggested you always worked for me on all CM based ROMs I've ever used. Maybe try uninstalling viper, edit those files and install again? Can't assure that will work but if you got time and you know what you're doing it's not a big deal. ?
seanwlk said:
Edit the following files
/system/build.prop
ro.qc.sdk.audio.fluencetype=fulence
Change to
ro.qc.sdk.audio.fluencetype=none
/system/etc/audio_platform_info.XML
SND_DEVICE_IN_HANDSET_MIC
Change the value from 40 to 4
This will solve your issues with the mic.
Click to expand...
Click to collapse
Tried that, no difference
r0tati0n said:
This works for me:
https://vcillusion.wordpress.com/20...n-low-mic-during-call-problem-in-oneplus-one/
Click to expand...
Click to collapse
Im a bit confused about this one:
7. change the following commands
Change all non zero valued occurrences (where xx denotes any non zero number) -
<ctl name="RX1 Digital Volume" value="xx">
<ctl name="RX2 Digital Volume" value="xx">
to
<ctl name="RX1 Digital Volume" value="93">
<ctl name="RX2 Digital Volume" value="93">
Click to expand...
Click to collapse
Is it in whole file where have the value(which is a lot of) and is the value that I should change XX or 00? Dont really understand
@Peterrrrr Did you reboot after editing the files?
@Peterrrrr said:
Tried that, no difference
Im a bit confused about this one:
Is it in whole file where have the value(which is a lot of) and is the value that I should change XX or 00? Dont really understand
Click to expand...
Click to collapse
There should be only two lines you have to edit. change the XX (for me it was 00) to 93, in both lines. XX means placeholder
seanwlk said:
I've had this mobile data issue since the official COS 13.1 came out. To fix it you can only reboot. I've tried multiple solutions but nothing works.
I'm currently running the latest LineageOS Nightly and still have that, it's a PITA but I can live with it.
I wasn't able to find the conditions in which this bug happens, but it usually happens to me when I get out of the home with the WiFi turned on and connected
Click to expand...
Click to collapse
This is the same as for me, its usually when I go from WiFi to mobile data, the data just doesn't turn on. If i reboot my phone, it comes back and works fine. The only other time I've had it is when I go to an area with bad signal quality and the data drops off but doesn't come back when I get into an area with better signal.
Since I did the flash back to stock and reinstalled the ROM, it hasn't happened as much but it does still happen from time to time. Its pretty frustrating when it happens because I usually miss a load of Whatsapp/Messenger messages. But the restart fix works so I guess ill just have to live with it. Its good to hear that its not just me though!
donk165 said:
This is the same as for me, its usually when I go from WiFi to mobile data, the data just doesn't turn on. If i reboot my phone, it comes back and works fine. The only other time I've had it is when I go to an area with bad signal quality and the data drops off but doesn't come back when I get into an area with better signal.
Since I did the flash back to stock and reinstalled the ROM, it hasn't happened as much but it does still happen from time to time. Its pretty frustrating when it happens because I usually miss a load of Whatsapp/Messenger messages. But the restart fix works so I guess ill just have to live with it. Its good to hear that its not just me though!
Click to expand...
Click to collapse
Instead I have problem with very slow data: sometimes data letters doesn't show after turning off wifi and so I have to reboot or put in flight mode. Then, when in data only, it is really slow, expecially with 4G.
Some users say that this problem showed when COS 13.1 came out and it is still present in the LineageOS nightlies. I've bought my OPO used and it had COS 13.1.2 preinstalled, so I dunno how the phone was before 13.1 came out.
Can anyone tell me what ROM version works without data issues, like the ones I have?
Thanks in advance for the reply!
DS-1 said:
Instead I have problem with very slow data: sometimes data letters doesn't show after turning off wifi and so I have to reboot or put in flight mode. Then, when in data only, it is really slow, expecially with 4G.
Some users say that this problem showed when COS 13.1 came out and it is still present in the LineageOS nightlies. I've bought my OPO used and it had COS 13.1.2 preinstalled, so I dunno how the phone was before 13.1 came out.
Can anyone tell me what ROM version works without data issues, like the ones I have?
Thanks in advance for the reply!
Click to expand...
Click to collapse
This is actually the same issue we were talking about. And yes this first came out on COS13.1 I had this since then, and still have it now on the latest nightly build of LineageOS from 3rd April so I guess its something that we'll have to live with.

Redmi Airdots 3 - Interferences

Hi, I've bought some Redmi Airdots 3 headphones, and I have problems using them. They have a lot of interference, mainly on the left one. Sometimes they work fine for a moment and I can hear ok, but it doesn't last long, and this makes it impossible to use them.
I've read on another post that something similar happens with Air Pods. I've tried some profile changes from developer mode, but nothing changes.
I've also tried using them without WiFi connection, whithout phone case and they still fail.
The better way I've found is using them with flight mode activated, and they work almost a 95% ok.
Do you have any idea what is happening? Or any sugestions?
Try completely unpairing the airdots, and then try connecting them to another device (preferably with Bluetooth 5.2)
This in order to discard that you're facing an issue with the airdots and not with your phone
one0407 said:
Try completely unpairing the airdots, and then try connecting them to another device (preferably with Bluetooth 5.2)
This in order to discard that you're facing an issue with the airdots and not with your phone
Click to expand...
Click to collapse
I tried before post, I forgot. Unpairing was the first option, and other devices works nice.
I read about security patch update and after that other users have the same problem.
e.charry said:
I tried before post, I forgot. Unpairing was the first option, and other devices works nice.
I read about security patch update and after that other users have the same problem.
Click to expand...
Click to collapse
Try going to Developer Options/ Networking/ Absolute Volume.
Check if there's any change by enabling or disabling that option!
one0407 said:
Try going to Developer Options/ Networking/ Absolute Volume.
Check if there's any change by enabling or disabling that option!
Click to expand...
Click to collapse
I enable absolute volume and it's still working bad. I test different bluetooth profiles on Developer Options when I play music. Sometimes can't hear anything. If I change, work again (Of course, with interferences).
It's my girlfriend's phone... I will try to install a new stock ROM. Do you think do any change? And what do you say about Lineage, I read something about changes on codecs... I can't find that post and I don't remember exactly what they say and I'm newbie in audio options :')

Categories

Resources