Database Info

[ROOT][SM-T53X,SM-T33X][CF-AUTO-ROOT][Simplest method to get ROOT now for 5.02-5.1.1]

Hi folks . Dear @Chainfire update your CF-Auto-Root base and now we get opportunity to have root with the simplest method ! It works now on 5.02 and 5.1.1 stock firmwares . Sorry but knox is tripped .
Now this works on SM-T530 , SM-T530NU , SM-T535 , SM-T532 , SM-T533 ,SM-T330NU , SM-T331
Complete list you can see on https://autoroot.chainfire.eu/ .
HOW INSTALL :
BASIC INSTRUCTIONS
All downloads contain .tar.md5 files flashable in ODIN as PDA(AP)
Make sure your device is in ODIN download mode (usually you can get there by holding VolDown+Home+Power when the device is turned off), then start the included Odin file, press the PDA(AP) button, select the .tar.md5 file, and click Start. You can find more detailed instructions and assistance at XDA.
A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.
For the root to work, the device must reboot into recovery. Most devices will do this automatically after flashing these files, but in case that does not happen, please boot into recovery manually.
DOWNLOADS:
SM-T530
SM-T530NU
SM-T533
SM-T535
SM-T330NU
SM-T331

Added SM-T330NU and SM-T331

worked on 533 but are we now able to install twrp permanent?? anyway thanks a lot for root!

looking-g said:
worked on 533 but are we now able to install twrp permanent?? anyway thanks a lot for root!
Click to expand...
Click to collapse
You better ask @HausiX10 about this in PM .

Wow thank you for this! I successfully rooted my Tab 4 SM-T330NU using 5.1.1 on the first attempt with the files provided here. I had been trying all weekend to successful root my device using other methods and files, but for some reason they all resulted in bootloops. I kept reading through the troubleshoot forums for a solution, but nothing worked. I wish I would have found this thread sooner, it would have saved me a lot of problems!

bootloop
Hi I'm stuck in bootloop; set warranty bit: kernel. Any solutions?

Still working?

"You can find more detailed instructions and assistance at XDA." Mhm, I am on XDA so where are that detailed instructions? And when I finished root Unified daemon, Media memory and TouchWiz - home are stopping working. Is it normal?

I need sm-t537v please

What about the bootloader?
repey6 said:
Hi folks . Dear @Chainfire update your CF-Auto-Root base and now we get opportunity to have root with the simplest method ! It works now on 5.02 and 5.1.1 stock firmwares . Sorry but knox is tripped .
Now this works on SM-T530 , SM-T530NU , SM-T535 , SM-T532 , SM-T533 ,SM-T330NU , SM-T331
Complete list you can see on https://autoroot.chainfire.eu/ .
HOW INSTALL :
BASIC INSTRUCTIONS
All downloads contain .tar.md5 files flashable in ODIN as PDA(AP)
Make sure your device is in ODIN download mode (usually you can get there by holding VolDown+Home+Power when the device is turned off), then start the included Odin file, press the PDA(AP) button, select the .tar.md5 file, and click Start. You can find more detailed instructions and assistance at XDA.
A modified recovery and cache partition will be flashed, which will install (only) SuperSU, then clean-up the cache partition and re-flash the stock recovery.
For the root to work, the device must reboot into recovery. Most devices will do this automatically after flashing these files, but in case that does not happen, please boot into recovery manually.
DOWNLOADS:
SM-T530
SM-T530NU
SM-T533
SM-T535
SM-T330NU
SM-T331
Click to expand...
Click to collapse
Hi @repey6. Thanks for the tutorial.
Do you know if I need to worry about unlocking the bootloader on my device? It's a SM-T531 (Brazil) running 4.4.2.
@Chainfire's auto-root page warns that flashing the auto-root with the bootloader locked will probably brick it, but I'm so noob that I don't even know if mine is locked or not. I can only imagine that it is, since I haven't done anything close to flashing anything on this device.
Thanks for your attention.

BourbonCowboy said:
Hi @repey6. Thanks for the tutorial.
Do you know if I need to worry about unlocking the bootloader on my device? It's a SM-T531 (Brazil) running 4.4.2.
@Chainfire's auto-root page warns that flashing the auto-root with the bootloader locked will probably brick it, but I'm so noob that I don't even know if mine is locked or not. I can only imagine that it is, since I haven't done anything close to flashing anything on this device.
Thanks for your attention.
Click to expand...
Click to collapse
Hi. Your bootloader is not unlocking. But supersu is not actual now. Magisk root is better.

So how to I unlock it?
repey6 said:
Hi. Your bootloader is not unlocking. But supersu is not actual now. Magisk root is better.
Click to expand...
Click to collapse
Thanks for the answer! So, how do I unlock the bootloader then? Haven't been able to find it here in XDA. Also, I've found a post here on the forum where a user claimed Magisk didn't work in 5.0.2 because the kernel was too old. Do you know if Towelroot is better?
Pls help. :crying:

BourbonCowboy said:
So how to I unlock it?
Thanks for the answer! So, how do I unlock the bootloader then? Haven't been able to find it here in XDA. Also, I've found a post here on the forum where a user claimed Magisk didn't work in 5.0.2 because the kernel was too old. Do you know if Towelroot is better?
Pls help. :crying:
Click to expand...
Click to collapse
have you found a solution? same problem here!!!!!!!!!!!!!

[SOLVED] Galaxy S6 G920FQ Bootloader unlock?

As I said in the title my device is G920FQ model. I want to try custom roms, is it already bootloader unlocked or is there a way to unlock bootloader? I've searched this place but couldn't find anything.
Also if it is bl unlocked can I just flash TWRP without rooting my device first?
EDIT: Got it all sorted out.

kuzeykutupdayisi said:
As I said in the title my device is G920FQ model. I want to try custom roms, is it already bootloader unlocked or is there a way to unlock bootloader? I've searched this place but couldn't find anything.
Also if it is bl unlocked can I just flash TWRP without rooting my device first?
Click to expand...
Click to collapse
what i know is that u don't have to root before flashing twrp so just flash twrp fist and see if u can get into the recovery mode
so try to flash twrp and get into it try different ver. of it
if u can't try to unlock bootloader if it was locked and search google for (how to check if bootloader is locked s6)

ahmedsasker said:
what i know is that u don't have to root before flashing twrp so just flash twrp fist and see if u can get into the recovery mode
so try to flash twrp and get into it try different ver. of it
if u can't try to unlock bootloader if it was locked and search google for (how to check if bootloader is locked s6)
Click to expand...
Click to collapse
I've got it all sorted out, but thanks for your answer!

Any method to root without unlocking bootloader?

Hi everyone!
I just got my Nougat 7.0 update a week ago in Hungary.
I would like to know, is there any method to root the device WITHOUT UNLOCKING THE BOOTLOADER?
I read that is possible like this way: run fastboot boot recovery.img and flash the superuser zip there
Is this ok to root my A9?
Thank you the answers in advance.

No the method you outlined has long been disabled
Laximus said:
Hi everyone!
I just got my Nougat 7.0 update a week ago in Hungary.
I would like to know, is there any method to root the device WITHOUT UNLOCKING THE BOOTLOADER?
I read that is possible like this way: run fastboot boot recovery.img and flash the superuser zip there
Is this ok to root my A9?
Thank you the answers in advance.
Click to expand...
Click to collapse

Wonders_Never_Cease said:
No the method you outlined has long been disabled
Click to expand...
Click to collapse
=( Thank you

SAFE rooting to HUAWEI MATE 9

hi guys ,
I`ve read this thread https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
my ask : Does this rooting goes well with MHA-L29C185B172 ?
if not , then how can i root my device SAFELY ?
thanks all

one, post, no experience with rooting android phones, do NOT root this phone unless there is some important reason to.
do ALOT more reading before you even think about rooting

Thx to reply. Like the others i wanna root to have root apps in my phone ,

Thx . Wanna have apps requires root in my phone . That simple

You don't even need to decrypt if you don't want to.
Unlock Developer Options (Settings - About: tap build number until it says it's enabled)
Go to the Developer Options and enable OEM Unlocking
Unlock bootloader
Flash twrp 3.1.0
Flash SuperSU no-decrypt (https://mega.nz/#!lkV0jbYJ!b1h-5uVksvpt7rw0tRHV7Qxjwk2xkKox0w-iRsCLlbU)
Have fun.
For decryption follow the decrypt guide.
To undo root and relock (Bootloader Locked) flash a stock firmware using the Force flash guide under Guides or use firmware finder).
For Magiskv12 root you need firmware B182+

super!!! , I did unlock the device and flashed twrp ,then tried install SU but failed , that made me afraid of bricking if i did further action

nawraz said:
super!!! , I did unlock the device and flashed twrp ,then tried install SU but failed , that made me afraid of bricking if i did further action
Click to expand...
Click to collapse
Original SuperSU 2.79 won't install. We have no loop support in kernel pre-B182. And even with support it doesn't install. The one I linked is a phh supersu hybrid. It uses phh su's method of installing, but installs SuperSU.

ante0 said:
Original SuperSU 2.79 won't install. We have no loop support in kernel pre-B182. And even with support it doesn't install. The one I linked is a phh supersu hybrid. It uses phh su's method of installing, but installs SuperSU.
Click to expand...
Click to collapse
Hi. I just happen to come across your post and noticed you said that there is no loop support pre-B182. I have the Chinese version with B213. Some apps, like Linux on Android need, unless something has changed, loop support as well as root. Do you have a reference or a link about the loop support on this phone? Thanks!

I failed install su however still waiting for any updates

nawraz said:
I failed install su however still waiting for any updates
Click to expand...
Click to collapse
You flashed the one I linked? And which twrp do you use?

ante0 said:
You don't even need to decrypt if you don't want to.
Unlock bootloader
Flash twrp 3.1.0
Flash SuperSU no-decrypt (https://mega.nz/#!lkV0jbYJ!b1h-5uVksvpt7rw0tRHV7Qxjwk2xkKox0w-iRsCLlbU)
Have fun.
For decryption follow the decrypt guide.
To undo root and relock (Bootloader Locked) flash a stock firmware using the Force flash guide under Guides or use firmware finder).
For Magiskv12 root you need firmware B182+
Click to expand...
Click to collapse
Just would like to say that it's not fair to say him that in case that the second entry said: One post on xda and he wants to root!
I think the problem is the order you gave him @ante0 (MAYBE!)
Unlock bootloader
flash TWRP
And I think he now has a BIG problem bc you DIDN'T said or forced him to go into developer settings and turn on OEM-unlock!
@nawraz did you turned on OEM-unlock in developer settings?
if you boot into fastboot mode are BOTH (bootloader and FRP = unlocked (in red letters), or and I really hoper NOT is FRP lock (in green letters)???
Maybe that is now the problem for him, not being able to flash SuperSU?
If you have luck @nawraz then try to flash TWRP 3.0.2-2 and with that SuperSU2.79
If you have root then you can install latest TWRP (3.1.0-1)
If you can't flash anything... oh oh!

FootSlave said:
Just would like to say that it's not fair to say him that in case that the second entry said: One post on xda and he wants to root!
I think the problem is the order you gave him @ante0 (MAYBE!)
Unlock bootloader
flash TWRP
And I think he now has a BIG problem bc you DIDN'T said or forced him to go into developer settings and turn on OEM-unlock!
@nawraz did you turned on OEM-unlock in developer settings?
if you boot into fastboot mode are BOTH (bootloader and FRP = unlocked (in red letters), or and I really hoper NOT is FRP lock (in green letters)???
Maybe that is now the problem for him, not being able to flash SuperSU?
If you have luck @nawraz then try to flash TWRP 3.0.2-2 and with that SuperSU2.79
If you have root then you can install latest TWRP (3.1.0-1)
If you can't flash anything... oh oh!
Click to expand...
Click to collapse
He already unlocked and flashed twrp.
3.1.0 installs SuperSU fine. 3.0.3 does not.
And if oem was locked he wouldn't even be in twrp as you can't flash anything with fastboot if it is locked.
But I'll update my post in case anyone does miss to unlock oem.

Hope you don't get me wrong!
Just said that bc I had that problem 5 days ago and the only thing that helped was funky!
I had a softbrick and a reboot always kicked me into eRecovery
I just had eRecovery and fastboot!
Bootloader relocked and frp locked!
Stupid me relocked the bootloader bc I read that you then can unlock oem, then unlock bootloader again!
Well, that was a mistake!
Send from Huawei Mate 9 with Tapatalk

FootSlave said:
Hope you don't get me wrong!
Just said that bc I had that problem 5 days ago and the only thing that helped was funky!
I had a softbrick and a reboot always kicked me into eRecovery
I just had eRecovery and fastboot!
Bootloader relocked and frp locked!
Stupid me relocked the bootloader bc I read that you then can unlock oem, then unlock bootloader again!
Well, that was a mistake!
Send from Huawei Mate 9 with Tapatalk
Click to expand...
Click to collapse
Yeah. Only way then would be to rebrand to C636 using the DLOAD method, then rebrand back to your stock version using the Update thread under Guides. The latter requires twrp though so you'd need to rebrand first to get a working system.
To be honest I just figured he had already unlocked and flashed twrp as he was in the decrypt thread
Missing oem was an error on my side. It was long since I had to unlock oem xD

ante0 said:
You flashed the one I linked? And which twrp do you use?
Click to expand...
Click to collapse
hi , i used twrp-3.0.2-2 successfully and failed with superuser-r310

nawraz said:
hi , i used twrp-3.0.2-2 successfully and failed with superuser-r310
Click to expand...
Click to collapse
Weird. I tested with 3.1.0 a few days ago. But I guess it could have to do with builds. 3.1.0 is using kernel for B182. Maybe it's fixed if you use 3.1.0 with B182.
Oh well, good you managed to install it anyway.
Edit: I tested with the SuperSU I linked.

mscion said:
Hi. I just happen to come across your post and noticed you said that there is no loop support pre-B182. I have the Chinese version with B213. Some apps, like Linux on Android need, unless something has changed, loop support as well as root. Do you have a reference or a link about the loop support on this phone? Thanks!
Click to expand...
Click to collapse
All I know is that it wasn't present in builds before B182.
 @st_voss is the one who found out it was added in B182 (Kernel build April. 11th probably as that's what I have on B182.).
It might be present in B181 on C636 as well, that was released 8th of May.

mr. ante0 ..... u r the man , thank you so much

thank you guys i finally rooted my mate 9 safely ,,,,, thanks n credits to ante0

thank you guys i finally rooted my mate 9 safely ,,,,, thanks n credits to ante0

[Question]About Rooting on Samsung S7 Live Demo Unit

Hello Guys! i need helo about my samsung s7 g930X Live demo unit. i want to root my device but i dont know how, i tried a lot of rooting method like cf autoroot / kingroot and oneclick root but still the same is not working and tried to flash twrp and i ended up on bootloop. i hope you can help me. thanks!

Up ^

OEM unlock on?

Beanvee7 said:
OEM unlock on?
Click to expand...
Click to collapse
yes sir its on

It's been a while since I first rooted but isn't there a flashable zip that has to be done at the same time https://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770
See steps 9/10/11

Beanvee7 said:
OEM unlock on?
Click to expand...
Click to collapse
Beanvee7 said:
It's been a while since I first rooted but isn't there a flashable zip that has to be done at the same time https://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770
See steps 9/10/11
Click to expand...
Click to collapse
Thank you very much sir im gonna try this...