Database Info

[How to]International xt9

Since lot of users can have some problems, i created how to change xt9 language. some can find this quite usefull
you don`t need to install any other files, it is just a little bit of reg editing
1. you must check value here
\HKLM\Software\Tegic\eT9\DefaultLanguage
for wwe rom it should be hex 0109 (dec 259) (it depends on your rom)
2.find here your default hex number (should be 0109 for wwe)
\HKLM\Software\Tegic\eT9\LdbFiles\
in this directory are keys with string value like XXIsUN_xt9.ldb
for wwe at 0109 it is supposed to be ENIsUN_xt9.ldb (it depends on your rom)
change first two letters by language you want (warning, this codes can be assigned bad, i am guessing it from alpha2, pm me, if you have different opinion):
AR - Argentina
CS - Czech Republic
DA - Denmark
DE - Germany
EL - Greece
ES - Spain
FI - Finland
FR - France
HU - Hungaria
IT - Italy
NL - Netherlands
NO - Norway
PL - Poland
PT - Portugal
RO - Rumunia
RU - russia
SK - Slovakia
SV - Sweden
TR - Turkey
soft reset device, and it should work. feedback appreciated.

Thanks, didn't know. I can add no reset is needed, and the number in defaultlanguage is decimal value of the preffered language (definition is in hex).
Now the libraries without diacritical marks would be useful

Hi, I'm trying to do this for Turkish. I used:
HKLM\Software\Tegic\eT9\Ldbfiles\11F = TRlsUN_xt9.ldb
I can see Turkish in the language list but the selection does not change when I click on it. It works for other languages though. Any ideas why?

hi, pls how can i do this?
20mihalko said:
Hi, I`m trying to find some cab for slovak xt9, but i`m not lucky... has anybody some solution how to get slovak word database for htc xt9? thanks
EDIT: solved sorry for spamming
HKLM\Software\Tegic\eT9\AvailableLanguages = 0109,010C,0107,0110,010A,011B,0105
HKLM\Software\Tegic\eT9\Ldbfiles\105 = CSlsUN_xt9.ldb
HKLM\Software\Tegic\eT9\Ldbfiles\11B = SKlsUN_xt9.ldb
HKLM\Software\Tegic\eT9\DefaultLanguage = 261
Click to expand...
Click to collapse
i tried it with registry editor but i miss the last 2 values.
It is neccessary to write it there or i have bad vs? i have rom 43 not 48, because i dont know, where can i download it.
thx bro SR me too O2, me too.

Is it only a matter of reg edit? No aditional files needed? I'm looking for portuguese T9. Some cabs for other devices dont seem to work on Leo.
Anyone solved this one?

check first post, a have added how to change your language

20mihalko said:
check first post, a have added how to change your language
Click to expand...
Click to collapse
I followed your steps. In addition to that I added 0816 to the ...et9\availablelanguage, so as to have an additional entry on language selection, then soft reset the device.
Portuguese doesn't appear on the list, just "unknown". Keyboard layout on compact QWERTY changes to Portuguese layout but predictive test remains English.
Windows folder does have the PTIsUN_xt9.ldb. Any thoughts?

point is, that value, where is linked your language file at dir LdbFiles must be set in DefaultLanguage, and must be into availablelanguage... check your defaultlanguage value... be sure you are writing it in HEX

I did! They all match. I was using a Portuguese XT9 for Niki. It seemed to work fine, only some times strange stuff happens like only numbers will be written instead of the letters on a single quick press. I've seen on other topics some additional reg changes. I'm now wondering if it is possible to change to any language from any rom since some files could be missing in WWE, not allowing me to apply you steps to get Portuguese.

How about other languages, that are not on this list ???

It works for Romanian. But the dictionary its not that rich so its kind of useless.

GSC2K8 said:
Hi, I'm trying to do this for Turkish. I used:
HKLM\Software\Tegic\eT9\Ldbfiles\11F = TRlsUN_xt9.ldb
I can see Turkish in the language list but the selection does not change when I click on it. It works for other languages though. Any ideas why?
Click to expand...
Click to collapse
is there any comment on this?
i have the same problem

Hi!
I want to disable the xt9. I have installed the soft disable xt9 but stil not effected. So how can I change it to disable in the registry please
Thanks

karakemal said:
is there any comment on this?
i have the same problem
Click to expand...
Click to collapse
do you have default language 11F ?

[solved]
Alright my mates
http://forum.xda-developers.com/showpost.php?p=3304868&postcount=5)
here is the solution. download your language pack and you will have perfect xt9 dic.

I've check Polish and leters are messed up l=. z=x, x=c, v=n, b=n ,n=.,m=, if I rememberd correct but word prediction works
with out xt9 keyboard works as it should.

lutanica said:
Alright my mates
http://forum.xda-developers.com/showpost.php?p=3304868&postcount=5)
here is the solution. download your language pack and you will have perfect xt9 dic.
Click to expand...
Click to collapse
Hi! I've got the Portuguese cab and I can confirm that the word prediction works, BUT only for compact QUERTY and Phone Keypad. For the Full QUERTY, it really mess the keys.
Well... it's much better than nothing. I think it's half of a full solution.

20mihalko said:
do you have default language 11F ?
Click to expand...
Click to collapse
no default is 119 (english) i change to 11F but still the same problem after soft reset
it changes automatically to english back.

lutanica said:
Alright my mates
http://forum.xda-developers.com/showpost.php?p=3304868&postcount=5)
here is the solution. download your language pack and you will have perfect xt9 dic.
Click to expand...
Click to collapse
There is no turkish here
where can i find turkish xt9 ?

Sorry mate. But you could ask the guy that made those .cab files and put them there. Maybe he has the turkish .cab file somewhere.
karakemal said:
There is no turkish here
where can i find turkish xt9 ?
Click to expand...
Click to collapse

[Q] French Canadian keyboard on the Nexus S

Hi All
I live in Quebec and I just got myself a shiny NS. However, there is no option for a french canadian keyboard in the settings, only the azerty french keyboard. Is there an easy way to enable this language?
Thanks!!!

I don't live in Quebec but I wouldn't mind knowing the answer to this. I've read somewhere that Slideit keyboard from the market has a French Canadian Keyboard but I really wouldn't count on it til I tried it and last time I checked you had to pay for it. The only one I've tried is from the seeARM swype keyboard from his Galaxy S JL2 Rom but how to get it to work on the Nexus S I'm not sure but it was nice to have on the SGS.
edit: I have swipe beta on the Nexus S so maybe it can be ported over....not sure how but if someone here has any ideas it very well could work. seeARM hasn't been around in quite a while but might be able to run it on the Nexus somehow.

CraneGuy said:
I don't live in Quebec but I wouldn't mind knowing the answer to this. I've read somewhere that Slideit keyboard from the market has a French Canadian Keyboard but I really wouldn't count on it til I tried it and last time I checked you had to pay for it. The only one I've tried is from the seeARM swype keyboard from his Galaxy S JL2 Rom but how to get it to work on the Nexus S I'm not sure but it was nice to have on the SGS.
edit: I have swipe beta on the Nexus S so maybe it can be ported over....not sure how but if someone here has any ideas it very well could work. seeARM hasn't been around in quite a while but might be able to run it on the Nexus somehow.
Click to expand...
Click to collapse
Swype already works fine on the Nexus S. You cannot distribute Swype, it's illegal on XDA.
Check out keyboard alternatives, they most likely have what you're looking for. Alternatives such as Smart Keyboard Pro and Swiftkey.

I wasn't trying to distribute Swype, just trying to mention the only french canadian keyboard I'd seen so far....as being french canadian anyway since they are few and far between.

Thanks. I am aware of the alternative keyboards available but I would have liked to stick with the stock keyboard as I find it pretty nice!
I'll report here if I find a way.

Hi, I'm from Quebec too and I'll share some information that might be useful to other French-canadians Nexus S users.
First, I noticed the Nexus S doesn't have a French (Canada), which can be an issue with the News and Weather widget. I will explain how to take care of that.
Put your system language in French by going in the following menus
Settings > Language & keyboard > Select language > Français
Now you'll notice that the language is set to Français (France)
The problem now is that by having this language set, you automatically get an AZERTY keyboard.
Install the following application (Using the Barcode Scanner application from the Android Market)
Once it's installed, you'll have a new application called Paramètres régionaux. Open it up, press on the context menu button and press on Add Locale.
Put the following informations in the Add Locale popup:
Label: français (Canada)
Language: fr
Country: CA
Variant: <empty>
Now, to have a QWERTY keyboard, go in the following menus
Paramètres > Langue et clavier > Clavier Android > Langues de saisie > English (United States) (only have this keyboard checked)
Now you should have a french operating system, with a QWERTY keyboard and the News and Weather (Actualités et Météo) application that now gets Canadian-related news instead of France news.

Thanks for the great post. However, I wanted an english operating system with a qwerty with french and english dictionnary/autocomplete!
I finally found a way : install CM7. With this ROM you have all the dictionnary/locale you want!

Jackojack
Still nothing ?
Same new nexus S ( add to that a fresh scratch on the flimsiest screen I've ever touched ) but no french canadian keyboard. I'm can't stand the french OS.
But still need to type in french...
Nothing new ?
Thanks !

Before flashing CM7, I briefly used an app named "Gingerbread Keyboard" or something similar, that was free on Android Market and had a number of additional locales like French Canada (so QWERTY), or French QWERTZ which is used in Switzerland.

Another option with the stock rom (with alt. recovery so as to be able to mount /system in read-write mode) is to use adb to remove LatinIME.apk from /system/data and push the one from cm7 into the same location.
To get the apk you'll need to download cm7, unzip it and find the apk there.
Sent from my Nexus S using Tapatalk

wrick01 said:
Jackojack
Still nothing ?
Same new nexus S ( add to that a fresh scratch on the flimsiest screen I've ever touched ) but no french canadian keyboard. I'm can't stand the french OS.
But still need to type in french...
Nothing new ?
Thanks !
Click to expand...
Click to collapse
My understanding is that you can use the English keyboard (qwerty) with french autocorrect. You can add additional languages in the keyboard settings and then toggle languages by swiping the spacebar. The French Canadian keyboard is just a qwerty with extended character set for accented letters. Your keyboard wont show the extended characters anyway due to the size.

Remove some characters in dialing and receiving calls

Hi, I live in UK and have bought g2x from USA. I installed Weapon 2.8.
When I dial the number for example 07876543210 it shows like that 078-765-43210 also when receiving a call it shows 078-765-43210.
All my numbers are in first format (07876543210). Is there a way to change the dialing and receiving to first format?

I think it fixes your problems
if you go to Menu -Settings - Language & Keyboards - and change the language to English (UK).
Sent from my JitterBug, probably while in a silly class.

I don't have English(UK) only English (Unites States)

Can I download English Language (UK) ? Do I need to change a ROM to do that?

tomguernsey said:
Can I download English Language (UK) ? Do I need to change a ROM to do that?
Click to expand...
Click to collapse
Well then. I don't know if you can download it. I know CM7 has that option, that's what I checked before posting earlier.

Have you checked both languages (UK) and (US) how they display the incoming and outgoing calls?

I've sorted out the problem without changing the rom. I installed the application MoreLocale 2 and change the language to English (UK).
Thanks wewoapsiak for the tip

[Q] Disable automatic capital "i"

on samsung keyboard when I type "i" and put space after, it automatic change with capital "I" . This happens everywhere - sms facebook even now. When I write in english its not a problem, but I use english keyboard when I write in my language and its not good. Anybody who knows the solution? I like samsung keyboard and dont want to change. I can change only if there is similar keyboard but generally I wont to find solution for samsung keyboard.

theimmortalbg said:
on samsung keyboard when I type "i" and put space after, it automatic change with capital "I" . This happens everywhere - sms facebook even now. When I write in english its not a problem, but I use english keyboard when I write in my language and its not good. Anybody who knows the solution? I like samsung keyboard and dont want to change. I can change only if there is similar keyboard but generally I wont to find solution for samsung keyboard.
Click to expand...
Click to collapse
Pls. Try. This
sent from Smt210/r using xda free ...
im just trying to help so I hope it works

its off ! it happens only with "i" not with other letters

SM-N9860 HK Snapdragon add Language

HI,
I buy Galaxy Note 20 Ultra from Wondamobile but there is no my language,but they told me that the language would be there,he lied.
The question is, is there any possibility to modify the firmware and upload additional language there?

Have you tried languages in the settings, add language, selecting the 3 dots in the top right hand corner and select all languages?
Sent from my SM-N9860 using Tapatalk

Yes, but when I choose my language, not everything is translated, i need full language, maybe when i extract from exynos firmware language and add to this Hong-Kong version, i don't know if is this possible. Settings is still in English.

Then they didn't lie, if the language is there. Whether everything is translated or not is Samsung's responsability (Wondamobile can't check what is translated and what isn't).
maxpaynezm said:
Yes, but when I choose my language, not everything is translated, i need full language, maybe when i extract from exynos firmware language and add to this Hong-Kong version, i don't know if is this possible. Settings is still in English.
Click to expand...
Click to collapse

@maxpaynezm Have you found a solution for this problem?

No