Hey guys, this may or may not help anyone or may or may not have been posted but saved my arse when I thought my phone was fubar
Basically the phone died on me when charging with 20% juice left. It just would not turn on or charge, tried multiple cables, seeing if recognised in Pc, trying to power on holding different button combinations etc etc and still nothing.
Anyway, next to the sim/sd card slot is a little yellow button. Stick a pen, screwdriver or whatever in there and hold down till it comes alive (took mine about 35 seconds). My phone turned on at 100% battery and all data settings etc as it was, so it looked like it was actually charging prior with no indication.
Hope this helps anyone and sorry if already posted.
@Adster013
I came to here to write same thing After washing my z5, i wait 4-5 hours to charge again. Tried to charge but no luck with travel charger or pc. I opened TWRP, wiped cache and dalvik.. Then i push the yellow button 10 seconds. Phone vibrates.. Then put into charger, it starts charging :/
IP65/68 means NOTHING!
I'm having probably the same problem, but no mater how long I hold the yellow button the phone doesn't show any indication of waking up. I'm wondering if it from the last update I receive last week. I have opened a thread about it here with full explanation https://forum.xda-developers.com/xperia-z5/help/responece-idication-z5-black-screen-t3610295
Related
So there is another thread sort of like this a bit below this one, but it's not quite the same situation, so I figured I'd make my own thread. My gf's tf101 has been working fine for the last couple of months, and then a couple of days ago, she found that as soon as she unplugged the tablet, it would shut off instantly. Once it's plugged back into the charger, it will boot and work fine. But, it will only work at all when plugged into the charger. When removed, no matter how long you hold the power button down, it won't turn on. I tried plugging it into the computer, and when I press the power button, it will flash the boot screen for about half a second, and then dies again. Keeps doing that, and will not stay on. Any suggestions, before an RMA? Anything to try?
Thanks.
What is the battery level showing when it is plugged in and on? Also check it with the Dual Battery Widget to see what that reports for battery charge/
I would back up all the data and apps, back up any important files and try a factory data reset. If that does not help, I would send it in for repair.
Ok, I was thinking about trying a factory reset next. The tablet shows 99% battery life left.
I plugged my phone in last night and when I woke up today it was off. I pulled out the charging cord and held the power button with no effect. Thinking the cord may have slipped partly out and let the phone die, I plugged it back in and was greeted by the battery charging screen, showing full charge. I pressed the power button and the phone went black. On further investigation, it seems my press of the power button didn't have to do with it turning off, as whenever I plug it in it shows the full battery screen for a couple of seconds before turning off again. If I unplug it and plug it back in it just repeats this. I've reseated the battery, I've tried holding volume down and the power button, and nothing's changed the phone's behavior. The phone is completely stock, and never opened beyond the battery and card doors.
It's pretty old and I'm pretty sure I do have an upgrade available, so I'm not too upset if I have to buy a new phone, but I'd like to confirm that it is FUBAR before I go that far, and I'd like to be able to extract my data if possible. Any suggestions would be appreciated.
unhh said:
I plugged my phone in last night and when I woke up today it was off. I pulled out the charging cord and held the power button with no effect. Thinking the cord may have slipped partly out and let the phone die, I plugged it back in and was greeted by the battery charging screen, showing full charge. I pressed the power button and the phone went black. On further investigation, it seems my press of the power button didn't have to do with it turning off, as whenever I plug it in it shows the full battery screen for a couple of seconds before turning off again. If I unplug it and plug it back in it just repeats this. I've reseated the battery, I've tried holding volume down and the power button, and nothing's changed the phone's behavior. The phone is completely stock, and never opened beyond the battery and card doors.
It's pretty old and I'm pretty sure I do have an upgrade available, so I'm not too upset if I have to buy a new phone, but I'd like to confirm that it is FUBAR before I go that far, and I'd like to be able to extract my data if possible. Any suggestions would be appreciated.
Click to expand...
Click to collapse
If you have access to another battery, you could try that, but since you're seeing the full battery symbol I'm guessing that that's not the issue. You can always recover your sdcard data by putting it in a card reader, but the phone's apps, app data, and settings may be more difficult.
Well, turns out the problem was much less serious than I thought: my charging cord has bitten the dust. I'm not sure why I've been seeing the full battery, but when I took it to the AT&T store, the person who helped me plugged it in and it started right up. I just need to get a cable that's not my years-old piece of crap that came with the phone.
Here's my little story. I dropped my N5 and cracked the screen. It worked, but I wanted it to be pretty again. So I bought a screen/case and proceeded to do the swap. I watched several videos, read guides, etc and followed them step-by-step. After it was done, I was surprised how smoothly everything went. I then went to power it up and got nothing. I checked all the cable connections, reseated them, and still got nothing. I put everything back with the cracked screen. Still nothing. I check the cables carefully, there are no cracks or breaks in them. I left it on the charger all night and the next day, checking periodically, still nothing. I checked the battery connector with a multimeter, and it was getting a reading off it, so the thing must be receiving power, right? Anyway, I gave up for a few days, busy with the rest of life.
I came back to it one day, plugged it into the charger and this time I got the red blinking light. I searched around, and that seems to indicate the battery had lost it's charge completely. Again I charged it overnight, still nothing. I got adventurous and removed the battery and tried powering it with just the power cable plugged in. This time it displayed the charge full battery/lightning icon. Success! I hit power and it starts to boot, displays the Google logo, then shut down after maybe five seconds. So, it must be getting power through the system from the USB port. The mainboard/cpu/screen works, it's able to start booting. It even boots to the bootloader, keys work there.
Again I turned to the problem being the battery. I picked up another, thinking perhaps mine had gone bad somehow even though I never had a bit of trouble out of it (about 1.5 years old). I played with it some more, with either battery inside, it doesn't do anything. Without a battery, it starts to boot but gives up. Hoping I could get something from the bootloader, I plugged it into my PC, but the USB port doesn't seem to provide enough juice to get it back to the bootloader with no battery.
Finally, during one of my tests, I plugged in the battery while it had the charging cable in. Then it popped up the battery charging animation. Exciting! It must be successfully charging, now. Previously, it didn't display anything when I charged it for many hours. Now it's been charging about six hours. The battery animation still shows it filling from the bottom, usually it would blink the animation from like halfway to the top, right? I hold the power button, and the battery animation disappears and it goes dead yet again. I run the same tests, battery in, battery out and get the same results. It boots when there's no battery and the charging cable in, nothing when the battery is in with or without the charging cable.
So, here I am stuck again. Any other ideas? Thanks.
I recently dropped my phone on the ground and the glass is now broken. But it worked normally for about 14 days. Then suddenly one day at work it shut down on its own. After that I wasn't able to start it. No reaction for any of the buttons, nor their combinations. Even when I plugged the charger in, no sign of life. I thought it's over.
Then the next day, I plugged the charger in and the screen with 0% battery appeared. So I left it charging, but when I came back to it (20 minutes) it was dead again. Not even the diode indicating it is charging. Again no response for the buttons, nothing. So I tried to disassemble it, disconnected everything. Put it together and viola! The screen indicating 0% battery was there again. I left it like that for a while, and when it was charged a little, I tried to start it. It started and normally worked. At least it seemed to, but after a while (1 - 3 minutes) while I was using it, it went to the dead phone again.
So I discovered, that when I disconnect the battery for a while and then connect it again, I am able to boot the phone. I was even able to do factory reset. I thought I got it and that it was some software fault. However after like 5 minutes (it downloaded all apps, logged to my google account, looked all ok) the screen shut down again and again the phone played dead.
Now I have the phone booted, and charging (almost 100% now). But I guess when I start using it again, it will again go to the dead mode (since it did it everytime after I used it a little, no specific action done, totally random).
I guess it has to be related to the broken glass. Maybe some water or humidity got through it and the phone is trying to save itself from damage by going to the dead mode. It's weird because sometimes (like now) the phone is OK when not used, normally chraging and not shutting down (now it's ON for about 40 minutes), but if it shuts down, it takes about 3 or 4 battery disconnect and connect again, before it boots to the main screen. Sometimes it just dies before the screen, sometimes it dies when I try to plug the charger in, really no idea what causes it.
How should I diagnose it? USB debugging and check the log when using it and when it dies? Or has anyone experienced this too? Or could the battery be damaged? Or can I somewhere set the phone to prevent from selfkilling actions? Today I will try my main board in my friends G Flex 2, to see if it's the board, or something else.
Error log from console before it shut down
mazlixek said:
I recently dropped my phone on the ground and the glass is now broken. But it worked normally for about 14 days. Then suddenly one day at work it shut down on its own. After that I wasn't able to start it. No reaction for any of the buttons, nor their combinations. Even when I plugged the charger in, no sign of life. I thought it's over.
Then the next day, I plugged the charger in and the screen with 0% battery appeared. So I left it charging, but when I came back to it (20 minutes) it was dead again. Not even the diode indicating it is charging. Again no response for the buttons, nothing. So I tried to disassemble it, disconnected everything. Put it together and viola! The screen indicating 0% battery was there again. I left it like that for a while, and when it was charged a little, I tried to start it. It started and normally worked. At least it seemed to, but after a while (1 - 3 minutes) while I was using it, it went to the dead phone again.
So I discovered, that when I disconnect the battery for a while and then connect it again, I am able to boot the phone. I was even able to do factory reset. I thought I got it and that it was some software fault. However after like 5 minutes (it downloaded all apps, logged to my google account, looked all ok) the screen shut down again and again the phone played dead.
Now I have the phone booted, and charging (almost 100% now). But I guess when I start using it again, it will again go to the dead mode (since it did it everytime after I used it a little, no specific action done, totally random).
I guess it has to be related to the broken glass. Maybe some water or humidity got through it and the phone is trying to save itself from damage by going to the dead mode. It's weird because sometimes (like now) the phone is OK when not used, normally chraging and not shutting down (now it's ON for about 40 minutes), but if it shuts down, it takes about 3 or 4 battery disconnect and connect again, before it boots to the main screen. Sometimes it just dies before the screen, sometimes it dies when I try to plug the charger in, really no idea what causes it.
How should I diagnose it? USB debugging and check the log when using it and when it dies? Or has anyone experienced this too? Or could the battery be damaged? Or can I somewhere set the phone to prevent from selfkilling actions? Today I will try my main board in my friends G Flex 2, to see if it's the board, or something else.
Click to expand...
Click to collapse
Adding the error log from console
OK so it was probably mother board fault, so I had to buy a new phone It is like 3 months, and I just yesterday accidentally poured some water on it, so i destroyed another one. It is still in warranty but I guess with water damage there is no warranty. Anyone knows where to find all the water damage indicators? Or is it even possible to make it look like there was no water damage?
Was accessing dual recovery to wipe for a clean slate and it had a sudden death. The charging LED was no longer lit. Left the phone alone for about 2 weeks to let it drain but no response. Decided to order another battery for testing thinking it may have been bad, still no response. What I did notice is that if the battery is removed and the charger is connected, the LED blinks red constantly. However, if I were to attach the battery connector the LED will stop blinking after a few seconds. Is this an issue with the motherboard itself or can there something be done to bring it back to life?
*Update*
Let it charge for a couple of hours. Still not turning on but getting some response at least. The phone will now vibrate in sets of 3's if I hold down Power and Volume +. When trying to charge, the red LED will come on for 5 seconds then off every 5 seconds. When connected to the PC, it shows as unidentified USB, but the sound of it being disconnected is constantly going off. Not sure if anyone knows how I should proceed from here...
Hi
Cruxnik02 said:
Was accessing dual recovery to wipe for a clean slate and it had a sudden death. The charging LED was no longer lit. Left the phone alone for about 2 weeks to let it drain but no response. Decided to order another battery for testing thinking it may have been bad, still no response. What I did notice is that if the battery is removed and the charger is connected, the LED blinks red constantly. However, if I were to attach the battery connector the LED will stop blinking after a few seconds. Is this an issue with the motherboard itself or can there something be done to bring it back to life?
*Update*
Let it charge for a couple of hours. Still not turning on but getting some response at least. The phone will now vibrate in sets of 3's if I hold down Power and Volume +. When trying to charge, the red LED will come on for 5 seconds then off every 5 seconds. When connected to the PC, it shows as unidentified USB, but the sound of it being disconnected is constantly going off. Not sure if anyone knows how I should proceed from here...
Click to expand...
Click to collapse
Hi my phone is a D6603 and i was having a very and inusual problem like you Sudden death with some response vibrating in sets of 3's. My problem was resolve when i remove the sim then press the reset button 2 times in a row but slowly and the phone was starting again
I dont remember if it was or not conected try both ways
Back up your files and start working to keep it warm and dry, remember that it can be water damage. I downloaded minergate and began to mine in easy difficulty so that it would not become slow, but at the same time to keep it warm. It is only to dry if it was damaged by water, I do not recommend anyone to mine with a smartphone xD