What's up friends. Some of you could provide me the update.zip file for the build number FRD-L04MEXC567B121 for me honor 8 as it gave me Brick. first of all, Thanks.
Related
Hello,
it seem to be a problem to update some Honor 6 Plus (PE-TL10) with the updates from the huawei page.
Is there any possibility to convert the update.app from huawei to a flash-able zip file, to install with CWM?
Thank you in advance.
Hello,
I have a problem with a Huawei mt1-U06. When I turn it on it remains on the upload page Android and crashes. By starting the phone from recovery and tells me: Can not mount etc.
I tried to download the original firmware, I created the folder on the sd dload and inserted inside the file Update.app, but when I go to install the firmware on the phone can not find the file.
how can I proceed to reset the phone?
Hello,
Please post your question here:
http://forum.xda-developers.com/ascend-p6/ascend-mate
That forum covers more than one version of Ascend Mate but the members there should be able to help you.
Hello there,
My first post here. It is a big forum, so I have to find my way.
Hope you can help me.
Some info:
My device is a Huawei Y550 L01.
The bootloader is unlocked and my device is rooted.
It ran Android KitKat 4.4.4 but I did install cyanogenmod 11 and it looked great.
Problems began when I installed a new boot-theme. It was booting over and over again with the new boot-theme. (bootloop).
I did several things: try to recover the back-up, try to re-install cyanogenmod 11, wiped cache, dalvik cache, system etc. Nothing worked so far. I think my phone is bricked now.
It now only boots in twrp.
So I read the thread of Dimspace:
IVE BRICKED MY PHONE!
Download the full Huawei Y550 rom from Here (You want the penultimate file - y550 build 239
Download the Huawei update extractor from the same link
Run update extractor and extract the rom
Copy the entire folder "dload" to the root of your sdcard (so there is a folder on your sd card called dload containing the update file)
Hold down all physical buttons on your phone - volume up, volume down and power at once
Click to expand...
Click to collapse
Info is very helpful :good:, but I am not sure what to do. I think I have to install the full Huawei Y550 Rom, like described above, but do not know exactly how. I downloaded the Huawei update extractor and the Y550 rom (think I need the build 246 version instead of the 239).
My question is:
- any others solutions in how to get my device working again?
- do I need to extract the Update.app file, which is in the Huawei Y550 rom, before putting it in the dload folder of my sd-card?
I can see the files with the Huawei update extractor. Do I have to extract those files and afterwards transfer the files (in the dload folder) to the sd-card?
Dajoh59 said:
Hello there,
My first post here. It is a big forum, so I have to find my way.
Hope you can help me.
Some info:
My device is a Huawei Y550 L01.
The bootloader is unlocked and my device is rooted.
It ran Android KitKat 4.4.4 but I did install cyanogenmod 11 and it looked great.
Problems began when I installed a new boot-theme. It was booting over and over again with the new boot-theme. (bootloop).
I did several things: try to recover the back-up, try to re-install cyanogenmod 11, wiped cache, dalvik cache, system etc. Nothing worked so far. I think my phone is bricked now.
It now only boots in twrp.
So I read the thread of Dimspace:
IVE BRICKED MY PHONE!
Download the full Huawei Y550 rom from Here (You want the penultimate file - y550 build 239
Download the Huawei update extractor from the same link
Run update extractor and extract the rom
Copy the entire folder "dload" to the root of your sdcard (so there is a folder on your sd card called dload containing the update file)
Hold down all physical buttons on your phone - volume up, volume down and power at once
Click to expand...
Click to collapse
Info is very helpful :good:, but I am not sure what to do. I think I have to install the full Huawei Y550 Rom, like described above, but do not know exactly how. I downloaded the Huawei update extractor and the Y550 rom (think I need the build 246 version instead of the 239).
My question is:
- any others solutions in how to get my device working again?
- do I need to extract the Update.app file, which is in the Huawei Y550 rom, before putting it in the dload folder of my sd-card?
I can see the files with the Huawei update extractor. Do I have to extract those files and afterwards transfer the files (in the dload folder) to the sd-card?
Click to expand...
Click to collapse
Solved this problem, after reading the thread "Everything Huawei Y550". There is a lot of information.
Here is what I did:
I downloaded the stock rom (build 246) to my pc. Extracted it and copied the dload folder with the update app to my sd-card: I extracted only the folder, not the update.app. Then did a forced update by holding both volume buttond and the power-on button. Released the power button after the huawei logo was coming up and after i saw the progression bar (for installing the rom) i released the volume buttons. Worked very good, thanks to the people in the "Everything Huawei Y550" forum.
Hi
I Think the title says it all ....
so here is my problem
I have the L29C900B133 update.app file And I want to be able to flash it via TWRP
This Rom is the most complete Rom till today for mate 8 and I think flashing it will solve my problems including applying themes and missing vendor
So please help
How can I make a flashable zip file using this update.app file ??
If there is any method please let me know or send a link
And Before anyone says anything i already looked in huawei update extractor and using it you can make flashable zip files but huawei mate 8 partition map is not available yet and i'm afraid that if i use mate 7 partition map it will brick my phone
tnx in advance
Hello Guys,
I have the european Version of the Honor 6x. After flashing a custom rom I wanted to come back to Stock Emui. But now I have a few problems with my Honor device. In the settings it isn't called Honor 6x any more, but generic-a15.
A huge part of the build.prop got lost so many things like f.e. the camera or the loudspeekers do not work any more.
Could someone maybe share the stock build.prop with me, so that I can solve at least one of the problems?
Thanks
In this case, the build.prop won't be helpful. You gotta flash the version.img of your actual firmware through fastboot or TWRP.
You can extract the version.img file with Huawei Update Extractor tool. You have to pull it out from the biggest update package that weights something like 1,49GB, usually "update.zip".
RedSkull23 said:
In this case, the build.prop won't be helpful. You gotta flash the version.img of your actual firmware through fastboot or TWRP.
You can extract the version.img file with Huawei Update Extractor tool. You have to pull it out from the biggest update package that weights something like 1,49GB, usually "update.zip".
Click to expand...
Click to collapse
Yeah the thing is, huawei wont publish the firmware online anymore, if you try to find the img in the net you cannot find it at all
Huawei did that, true, but luckily there is another site on which all the update packages are uploaded. Just look for yours here http://pro-teammt.ru/firmware-database/ you only have to write your build number and grab the file.
I messed up my build.prop with some "tweaks" (Thanks Zack. They don't work at all.). so could somebody else provide an original build.prop for BLN-L21? Thanks in advance.